vkCmdBindTransformFeedbackBuffersEXT - Bind transform feedback buffers to a command buffer

Description

The values taken from elements i of pBuffers, pOffsets and pSizes replace the current state for the transform feedback binding firstBinding + i, for i in [0, bindingCount). The transform feedback binding is updated to start at the offset indicated by pOffsets[i] from the start of the buffer pBuffers[i].

Valid Usage

• PhysicalDeviceTransformFeedbackFeaturesEXT::transformFeedback must be enabled

• firstBinding must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• The sum of firstBinding and bindingCount must be less than or equal to PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• All elements of pOffsets must be less than the size of the corresponding element in pBuffers
• All elements of pOffsets must be a multiple of 4
• All elements of pBuffers must have been created with the BUFFER_USAGE_TRANSFORM_FEEDBACK_BUFFER_BIT_EXT flag
• If the optional pSize array is specified, each element of pSizes must either be WHOLE_SIZE, or be less than or equal to PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBufferSize
• All elements of pSizes must be either WHOLE_SIZE, or less than or equal to the size of the corresponding buffer in pBuffers
• All elements of pOffsets plus pSizes, where the pSizes, element is not WHOLE_SIZE, must be less than or equal to the size of the corresponding buffer in pBuffers
• Each element of pBuffers that is non-sparse must be bound completely and contiguously to a single DeviceMemory object
• Transform feedback must not be active when the cmdBindTransformFeedbackBuffersEXT command is recorded

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• pBuffers must be a valid pointer to an array of bindingCount valid Buffer handles
• pOffsets must be a valid pointer to an array of bindingCount DeviceSize values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• This command must only be called outside of a video coding scope
• bindingCount must be greater than 0
• Both of commandBuffer, and the elements of pBuffers must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, Buffer, CommandBuffer, DeviceSize

vkCmdBeginTransformFeedbackEXT - Make transform feedback active in the command buffer

Description

The active transform feedback buffers will capture primitives emitted from the corresponding XfbBuffer in the bound graphics pipeline. Any XfbBuffer emitted that does not output to an active transform feedback buffer will not be captured.

Valid Usage

• PhysicalDeviceTransformFeedbackFeaturesEXT::transformFeedback must be enabled

• Transform feedback must not be active
• firstCounterBuffer must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• The sum of firstCounterBuffer and counterBufferCount must be less than or equal to PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• If counterBufferCount is not 0, and pCounterBuffers is not NULL, pCounterBuffers must be a valid pointer to an array of counterBufferCount Buffer handles that are either valid or NULL_HANDLE
• For each buffer handle in the array, if it is not NULL_HANDLE it must reference a buffer large enough to hold 4 bytes at the corresponding offset from the pCounterBufferOffsets array
• If pCounterBuffer is NULL, then pCounterBufferOffsets must also be NULL
• For each buffer handle in the pCounterBuffers array that is not NULL_HANDLE it must have been created with a usage value containing BUFFER_USAGE_TRANSFORM_FEEDBACK_COUNTER_BUFFER_BIT_EXT
• A valid graphics pipeline must be bound to PIPELINE_BIND_POINT_GRAPHICS
• The last pre-rasterization shader stage of the bound graphics pipeline must have been declared with the Xfb execution mode
• Transform feedback must not be made active in a render pass instance with multiview enabled

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• If counterBufferCount is not 0, and pCounterBufferOffsets is not NULL, pCounterBufferOffsets must be a valid pointer to an array of counterBufferCount DeviceSize values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• This command must only be called inside of a render pass instance
• This command must only be called outside of a video coding scope
• Both of commandBuffer, and the elements of pCounterBuffers that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, Buffer, CommandBuffer, DeviceSize

This function will call the supplied action between calls to cmdBeginTransformFeedbackEXT and cmdEndTransformFeedbackEXT

Note that cmdEndTransformFeedbackEXT is *not* called if an exception is thrown by the inner action.

vkCmdEndTransformFeedbackEXT - Make transform feedback inactive in the command buffer

Valid Usage

• PhysicalDeviceTransformFeedbackFeaturesEXT::transformFeedback must be enabled

• Transform feedback must be active
• firstCounterBuffer must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• The sum of firstCounterBuffer and counterBufferCount must be less than or equal to PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBuffers
• If counterBufferCount is not 0, and pCounterBuffers is not NULL, pCounterBuffers must be a valid pointer to an array of counterBufferCount Buffer handles that are either valid or NULL_HANDLE
• For each buffer handle in the array, if it is not NULL_HANDLE it must reference a buffer large enough to hold 4 bytes at the corresponding offset from the pCounterBufferOffsets array
• If pCounterBuffer is NULL, then pCounterBufferOffsets must also be NULL
• For each buffer handle in the pCounterBuffers array that is not NULL_HANDLE it must have been created with a usage value containing BUFFER_USAGE_TRANSFORM_FEEDBACK_COUNTER_BUFFER_BIT_EXT

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• If counterBufferCount is not 0, and pCounterBufferOffsets is not NULL, pCounterBufferOffsets must be a valid pointer to an array of counterBufferCount DeviceSize values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• This command must only be called inside of a render pass instance
• This command must only be called outside of a video coding scope
• Both of commandBuffer, and the elements of pCounterBuffers that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, Buffer, CommandBuffer, DeviceSize

vkCmdBeginQueryIndexedEXT - Begin an indexed query

Description

The cmdBeginQueryIndexedEXT command operates the same as the cmdBeginQuery command, except that it also accepts a query type specific index parameter.

This command defines an execution dependency between other query commands that reference the same query index.

The first synchronization scope includes all commands which reference the queries in queryPool indicated by query and index that occur earlier in submission order.

The second synchronization scope includes all commands which reference the queries in queryPool indicated by query and index that occur later in submission order.

The operation of this command happens after the first scope and happens before the second scope.

Valid Usage

• All queries used by the command must be unavailable

• The queryType used to create queryPool must not be QUERY_TYPE_TIMESTAMP
• The queryType used to create queryPool must not be QUERY_TYPE_ACCELERATION_STRUCTURE_COMPACTED_SIZE_KHR or QUERY_TYPE_ACCELERATION_STRUCTURE_SERIALIZATION_SIZE_KHR
• The queryType used to create queryPool must not be QUERY_TYPE_ACCELERATION_STRUCTURE_SIZE_KHR or QUERY_TYPE_ACCELERATION_STRUCTURE_SERIALIZATION_BOTTOM_LEVEL_POINTERS_KHR
• The queryType used to create queryPool must not be QUERY_TYPE_ACCELERATION_STRUCTURE_COMPACTED_SIZE_NV
• If the occlusionQueryPrecise feature is not enabled, or the queryType used to create queryPool was not QUERY_TYPE_OCCLUSION, flags must not contain QUERY_CONTROL_PRECISE_BIT
• query must be less than the number of queries in queryPool
• If the queryType used to create queryPool was QUERY_TYPE_OCCLUSION, the CommandPool that commandBuffer was allocated from must support graphics operations
• If the queryType used to create queryPool was QUERY_TYPE_PIPELINE_STATISTICS and any of the pipelineStatistics indicate graphics operations, the CommandPool that commandBuffer was allocated from must support graphics operations
• If the queryType used to create queryPool was QUERY_TYPE_PIPELINE_STATISTICS and any of the pipelineStatistics indicate compute operations, the CommandPool that commandBuffer was allocated from must support compute operations
• commandBuffer must not be a protected command buffer
• If called within a render pass instance, the sum of query and the number of bits set in the current subpass’s view mask must be less than or equal to the number of queries in queryPool
• If the queryType used to create queryPool was VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR, then the CommandPool that commandBuffer was allocated from must have been created with a queue family index that supports result status queries, as indicated by VkQueueFamilyQueryResultStatusPropertiesKHR::queryResultStatusSupport
• If there is a bound video session, then there must be no active queries
• If the queryType used to create queryPool was VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR and there is a bound video session, then queryPool must have been created with a VkVideoProfileInfoKHR structure included in the pNext chain of QueryPoolCreateInfo identical to the one specified in VkVideoSessionCreateInfoKHR::pVideoProfile the bound video session was created with
• If the queryType used to create queryPool was VK_QUERY_TYPE_VIDEO_ENCODE_FEEDBACK_KHR, then the CommandPool that commandBuffer was allocated from must support video encode operations
• If the queryType used to create queryPool was VK_QUERY_TYPE_VIDEO_ENCODE_FEEDBACK_KHR, then there must be a bound video session
• If the queryType used to create queryPool was VK_QUERY_TYPE_VIDEO_ENCODE_FEEDBACK_KHR and there is a bound video session, then queryPool must have been created with a VkVideoProfileInfoKHR structure included in the pNext chain of QueryPoolCreateInfo identical to the one specified in VkVideoSessionCreateInfoKHR::pVideoProfile the bound video session was created with
• If the queryType used to create queryPool was not VK_QUERY_TYPE_RESULT_STATUS_ONLY_KHR or VK_QUERY_TYPE_VIDEO_ENCODE_FEEDBACK_KHR, then there must be no bound video session
• If the queryPool was created with the same queryType as that of another active query within commandBuffer, then index must not match the index used for the active query
• If the queryType used to create queryPool was QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT the CommandPool that commandBuffer was allocated from must support graphics operations
• If the queryType used to create queryPool was QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT the index parameter must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackStreams
• If the queryType used to create queryPool was not QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT and not QUERY_TYPE_PRIMITIVES_GENERATED_EXT, the index must be zero
• If the queryType used to create queryPool was QUERY_TYPE_PRIMITIVES_GENERATED_EXT the CommandPool that commandBuffer was allocated from must support graphics operations
• If the queryType used to create queryPool was QUERY_TYPE_PRIMITIVES_GENERATED_EXT the index parameter must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackStreams
• If the queryType used to create queryPool was QUERY_TYPE_PRIMITIVES_GENERATED_EXT and the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled, the index parameter must be zero
• If the queryType used to create queryPool was QUERY_TYPE_PRIMITIVES_GENERATED_EXT then primitivesGeneratedQuery must be enabled
• If the queryType used to create queryPool was QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT then PhysicalDeviceTransformFeedbackPropertiesEXT::transformFeedbackQueries must be supported
• The queryType used to create queryPool must not be QUERY_TYPE_MESH_PRIMITIVES_GENERATED_EXT
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR, then the QueryPoolPerformanceCreateInfoKHR::queueFamilyIndex queryPool was created with must equal the queue family index of the CommandPool that commandBuffer was allocated from
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR, the profiling lock must have been held before beginCommandBuffer was called on commandBuffer
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR and one of the counters used to create queryPool was PERFORMANCE_COUNTER_SCOPE_COMMAND_BUFFER_KHR, the query begin must be the first recorded command in commandBuffer
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR and one of the counters used to create queryPool was PERFORMANCE_COUNTER_SCOPE_RENDER_PASS_KHR, the begin command must not be recorded within a render pass instance
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR and another query pool with a queryType QUERY_TYPE_PERFORMANCE_QUERY_KHR has been used within commandBuffer, its parent primary command buffer or secondary command buffer recorded within the same parent primary command buffer as commandBuffer, the performanceCounterMultipleQueryPools feature must be enabled
• If queryPool was created with a queryType of QUERY_TYPE_PERFORMANCE_QUERY_KHR, this command must not be recorded in a command buffer that, either directly or through secondary command buffers, also contains a cmdResetQueryPool command affecting the same query

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• queryPool must be a valid QueryPool handle
• flags must be a valid combination of QueryControlFlagBits values
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics, compute, decode, or encode operations
• This command must only be called outside of a video coding scope
• Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, CommandBuffer, QueryControlFlags, QueryPool, cmdBeginQuery, cmdEndQuery, cmdEndQueryIndexedEXT

This function will call the supplied action between calls to cmdBeginQueryIndexedEXT and cmdEndQueryIndexedEXT

Note that cmdEndQueryIndexedEXT is *not* called if an exception is thrown by the inner action.

vkCmdEndQueryIndexedEXT - Ends a query

Description

The command completes the query in queryPool identified by query and index, and marks it as available.

The cmdEndQueryIndexedEXT command operates the same as the cmdEndQuery command, except that it also accepts a query type specific index parameter.

This command defines an execution dependency between other query commands that reference the same query index.

The first synchronization scope includes all commands which reference the queries in queryPool indicated by query that occur earlier in submission order.

The second synchronization scope includes only the operation of this command.

Valid Usage

• All queries used by the command must be active

• query must be less than the number of queries in queryPool
• commandBuffer must not be a protected command buffer
• If cmdEndQueryIndexedEXT is called within a render pass instance, the sum of query and the number of bits set in the current subpass’s view mask must be less than or equal to the number of queries in queryPool
• If the queryType used to create queryPool was QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT or QUERY_TYPE_PRIMITIVES_GENERATED_EXT, the index parameter must be less than PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackStreams
• If the queryType used to create queryPool was not QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT and not QUERY_TYPE_PRIMITIVES_GENERATED_EXT, the index must be zero
• If the queryType used to create queryPool was QUERY_TYPE_TRANSFORM_FEEDBACK_STREAM_EXT or QUERY_TYPE_PRIMITIVES_GENERATED_EXT, index must equal the index used to begin the query
• If called within a subpass of a render pass instance, the corresponding cmdBeginQuery* command must have been called previously within the same subpass
• If called outside of a render pass instance, the corresponding cmdBeginQuery* command must have been called outside of a render pass instance

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• queryPool must be a valid QueryPool handle
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics, compute, decode, or encode operations
• This command must only be called outside of a video coding scope
• Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, CommandBuffer, QueryPool, cmdBeginQuery, cmdBeginQueryIndexedEXT, cmdEndQuery

vkCmdDrawIndirectByteCountEXT - Draw primitives with indirect parameters where the vertex count is derived from the counter byte value in the counter buffer

Description

When the command is executed, primitives are assembled in the same way as done with cmdDraw except the vertexCount is calculated based on the byte count read from counterBuffer at offset counterBufferOffset. The assembled primitives execute the bound graphics pipeline.

The effective vertexCount is calculated as follows:

const uint32_t * counterBufferPtr = (const uint8_t *)counterBuffer.address + counterBufferOffset;
vertexCount = floor(max(0, (*counterBufferPtr - counterOffset)) / vertexStride);

The effective firstVertex is zero.

Valid Usage

• If a Sampler created with magFilter or minFilter equal to FILTER_LINEAR and compareEnable equal to FALSE is used to sample a ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

• If a Sampler created with mipmapMode equal to SAMPLER_MIPMAP_MODE_LINEAR and compareEnable equal to FALSE is used to sample a ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT
• If a ImageView is sampled with depth comparison, the image view’s format features must contain FORMAT_FEATURE_2_SAMPLED_IMAGE_DEPTH_COMPARISON_BIT
• If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
• If a DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER descriptor is accessed using atomic operations as a result of this command, then the storage texel buffer’s format features must contain FORMAT_FEATURE_STORAGE_TEXEL_BUFFER_ATOMIC_BIT
• If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
• If the VK_EXT_filter_cubic extension is not enabled and any ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, it must not have a ImageViewType of IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, or IMAGE_VIEW_TYPE_CUBE_ARRAY
• Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
• Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
• If the cubicRangeClamp feature is not enabled, then any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must not have a SamplerReductionModeCreateInfo::reductionMode equal to SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE_RANGECLAMP_QCOM
• Any ImageView being sampled with a SamplerReductionModeCreateInfo::reductionMode equal to SAMPLER_REDUCTION_MODE_WEIGHTED_AVERAGE_RANGECLAMP_QCOM as a result of this command must sample with FILTER_CUBIC_EXT
• If the selectableCubicWeights feature is not enabled, then any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have SamplerCubicWeightsCreateInfoQCOM::cubicWeights equal to CUBIC_FILTER_WEIGHTS_CATMULL_ROM_QCOM
• Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
• For any ImageView being written as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT
• For any ImageView being read as a storage image where the image format field of the OpTypeImage is Unknown, the view’s format features must contain FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
• For any BufferView being written as a storage texel buffer where the image format field of the OpTypeImage is Unknown, the view’s buffer features must contain FORMAT_FEATURE_2_STORAGE_WRITE_WITHOUT_FORMAT_BIT
• Any BufferView being read as a storage texel buffer where the image format field of the OpTypeImage is Unknown then the view’s buffer features must contain FORMAT_FEATURE_2_STORAGE_READ_WITHOUT_FORMAT_BIT
• For each set n that is statically used by a bound shader, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout or DescriptorSetLayout array that was used to create the current Pipeline or ShaderEXT, as described in ???
• For each push constant that is statically used by a bound shader, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout or DescriptorSetLayout and PushConstantRange arrays used to create the current Pipeline or ShaderEXT, as described in ???
• If the maintenance4 feature is not enabled, then for each push constant that is statically used by a bound shader, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout or DescriptorSetLayout and PushConstantRange arrays used to create the current Pipeline or ShaderEXT, as described in ???
• Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command and the bound Pipeline was not created with PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
• If the descriptors used by the Pipeline bound to the pipeline bind point were specified via cmdBindDescriptorSets, the bound Pipeline must have been created without PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
• Descriptors in bound descriptor buffers, specified via cmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by the Pipeline bound to the pipeline bind point used by this command and the bound Pipeline was created with PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
• Descriptors in bound descriptor buffers, specified via cmdSetDescriptorBufferOffsetsEXT, must be valid if they are dynamically used by any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command
• If the descriptors used by the Pipeline bound to the pipeline bind point were specified via cmdSetDescriptorBufferOffsetsEXT, the bound Pipeline must have been created with PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT
• If a descriptor is dynamically used with a Pipeline created with PIPELINE_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident
• If a descriptor is dynamically used with a ShaderEXT created with a DescriptorSetLayout that was created with DESCRIPTOR_SET_LAYOUT_CREATE_DESCRIPTOR_BUFFER_BIT_EXT, the descriptor memory must be resident
• If the shaderObject feature is not enabled, a valid pipeline must be bound to the pipeline bind point used by this command
• If the shaderObject is enabled, either a valid pipeline must be bound to the pipeline bind point used by this command, or a valid combination of valid and NULL_HANDLE shader objects must be bound to every supported shader stage corresponding to the pipeline bind point used by this command
• If a pipeline is bound to the pipeline bind point used by this command, there must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
• If the Pipeline object bound to the pipeline bind point used by this command or any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
• If the Pipeline object bound to the pipeline bind point used by this command or any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
• If the Pipeline object bound to the pipeline bind point used by this command or any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
• If any stage of the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, and that stage was created without enabling either PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for uniformBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
• If the robustBufferAccess feature is not enabled, and any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
• If any stage of the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, and that stage was created without enabling either PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_EXT or PIPELINE_ROBUSTNESS_BUFFER_BEHAVIOR_ROBUST_BUFFER_ACCESS_2_EXT for storageBuffers, and the robustBufferAccess feature is not enabled, that stage must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
• If the robustBufferAccess feature is not enabled, and any ShaderEXT bound to a stage corresponding to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
• If commandBuffer is an unprotected command buffer and protectedNoFault is not supported, any resource accessed by bound shaders must not be a protected resource
• If a bound shader accesses a Sampler or ImageView object that enables sampler Y′CBCR conversion, that object must only be used with OpImageSample* or OpImageSparseSample* instructions
• If a bound shader accesses a Sampler or ImageView object that enables sampler Y′CBCR conversion, that object must not use the ConstOffset and Offset operands
• If a ImageView is accessed as a result of this command, then the image view’s viewType must match the Dim operand of the OpTypeImage as described in ???
• If a ImageView is accessed as a result of this command, then the numeric type of the image view’s format and the Sampled Type operand of the OpTypeImage must match
• If a ImageView created with a format other than FORMAT_A8_UNORM_KHR is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the image view’s format
• If a ImageView created with the format FORMAT_A8_UNORM_KHR is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have four components
• If a BufferView is accessed using OpImageWrite as a result of this command, then the Type of the Texel operand of that instruction must have at least as many components as the buffer view’s format
• If a ImageView with a Format that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64
• If a ImageView with a Format that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32
• If a BufferView with a Format that has a 64-bit component width is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 64
• If a BufferView with a Format that has a component width less than 64-bit is accessed as a result of this command, the SampledType of the OpTypeImage operand of that instruction must have a Width of 32
• If the sparseImageInt64Atomics feature is not enabled, Image objects created with the IMAGE_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command
• If the sparseImageInt64Atomics feature is not enabled, Buffer objects created with the BUFFER_CREATE_SPARSE_RESIDENCY_BIT flag must not be accessed by atomic instructions through an OpTypeImage with a SampledType with a Width of 64 by this command
• If OpImageWeightedSampleQCOM is used to sample a ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_WEIGHT_SAMPLED_IMAGE_BIT_QCOM
• If OpImageWeightedSampleQCOM uses a ImageView as a sample weight image as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_WEIGHT_IMAGE_BIT_QCOM
• If OpImageBoxFilterQCOM is used to sample a ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_BOX_FILTER_SAMPLED_BIT_QCOM
• If OpImageBlockMatchSSDQCOM is used to read from an ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
• If OpImageBlockMatchSADQCOM is used to read from an ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
• If OpImageBlockMatchSADQCOM or OpImageBlockMatchSSDQCOM is used to read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation
• If OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchWindowSSDQCOM, OpImageBlockMatchWindowSADQCOM, OpImageBlockMatchGatherSSDQCOM, OpImageBlockMatchGatherSADQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a Sampler as a result of this command, then the sampler must have been created with SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM
• If any command other than OpImageWeightedSampleQCOM, OpImageBoxFilterQCOM, OpImageBlockMatchWindowSSDQCOM, OpImageBlockMatchWindowSADQCOM, OpImageBlockMatchGatherSSDQCOM, OpImageBlockMatchGatherSADQCOM, OpImageBlockMatchSSDQCOM, or OpImageBlockMatchSADQCOM uses a Sampler as a result of this command, then the sampler must not have been created with SAMPLER_CREATE_IMAGE_PROCESSING_BIT_QCOM
• If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM instruction is used to read from an ImageView as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_2_BLOCK_MATCHING_BIT_QCOM
• If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM instruction is used to read from an ImageView as a result of this command, then the image view’s format must be a single-component format.
• If a OpImageBlockMatchWindow*QCOM or OpImageBlockMatchGather*QCOM read from a reference image as result of this command, then the specified reference coordinates must not fail integer texel coordinate validation
• Any shader invocation executed by this command must terminate
• The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
• The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
• If any shader statically accesses an input attachment, a valid descriptor must be bound to the pipeline via a descriptor set
• If any shader executed by this pipeline accesses an OpTypeImage variable with a Dim operand of SubpassData, it must be decorated with an InputAttachmentIndex that corresponds to a valid input attachment in the current subpass
• Input attachment views accessed in a subpass must be created with the same Format as the corresponding subpass definition, and be created with a ImageView that is compatible with the attachment referenced by the subpass' pInputAttachments[InputAttachmentIndex] in the currently bound Framebuffer as specified by Fragment Input Attachment Compatibility
• Memory backing image subresources used as attachments in the current render pass must not be written in any way other than as an attachment by this command

• If a color attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, it is not in the IMAGE_LAYOUT_ATTACHMENT_FEEDBACK_LOOP_OPTIMAL_EXT image layout, and either:

  • the PIPELINE_CREATE_COLOR_ATTACHMENT_FEEDBACK_LOOP_BIT_EXT is set on the currently bound pipeline or

  • the last call to cmdSetAttachmentFeedbackLoopEnableEXT included IMAGE_ASPECT_COLOR_BIT and

    • there is no currently bound graphics pipeline or
    • the currently bound graphics pipeline was created with DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT it must not be accessed in any way other than as an attachment by this command

• If a depth attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, it is not in the IMAGE_LAYOUT_ATTACHMENT_FEEDBACK_LOOP_OPTIMAL_EXT image layout, and either:

  • the PIPELINE_CREATE_DEPTH_STENCIL_ATTACHMENT_FEEDBACK_LOOP_BIT_EXT is set on the currently bound pipeline or

  • the last call to cmdSetAttachmentFeedbackLoopEnableEXT included IMAGE_ASPECT_DEPTH_BIT and

    • there is no currently bound graphics pipeline or
    • the currently bound graphics pipeline was created with DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT it must not be accessed in any way other than as an attachment by this command

• If a stencil attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, it is not in the IMAGE_LAYOUT_ATTACHMENT_FEEDBACK_LOOP_OPTIMAL_EXT image layout, and either:

  • the PIPELINE_CREATE_DEPTH_STENCIL_ATTACHMENT_FEEDBACK_LOOP_BIT_EXT is set on the currently bound pipeline or

  • the last call to cmdSetAttachmentFeedbackLoopEnableEXT included IMAGE_ASPECT_STENCIL_BIT and

    • there is no currently bound graphics pipeline or
    • the currently bound graphics pipeline was created with DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT it must not be accessed in any way other than as an attachment by this command
• If an attachment is written by any prior command in this subpass or by the load, store, or resolve operations for this subpass, it must not be accessed in any way other than as an attachment, storage image, or sampled image by this command
• If any previously recorded command in the current subpass accessed an image subresource used as an attachment in this subpass in any way other than as an attachment, this command must not write to that image subresource as an attachment
• If the current render pass instance uses a depth/stencil attachment with a read-only layout for the depth aspect, depth writes must be disabled
• If the current render pass instance uses a depth/stencil attachment with a read-only layout for the stencil aspect, both front and back writeMask are not zero, and stencil test is enabled, all stencil ops must be STENCIL_OP_KEEP
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT dynamic state enabled then cmdSetViewport must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SCISSOR dynamic state enabled then cmdSetScissor must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_WIDTH dynamic state enabled then cmdSetLineWidth must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPolygonModeEXT in the current command buffer set polygonMode to POLYGON_MODE_LINE, cmdSetLineWidth must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPrimitiveTopology in the current command buffer set primitiveTopology to any line topology, cmdSetLineWidth must have been called in the current command buffer prior to this drawing command
• If a shader object that outputs line primitives is bound to the SHADER_STAGE_TESSELLATION_EVALUATION_BIT or SHADER_STAGE_GEOMETRY_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, cmdSetLineWidth must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_BIAS dynamic state enabled then cmdSetDepthBias or cmdSetDepthBias2EXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetDepthBiasEnable in the current command buffer set depthBiasEnable to TRUE, cmdSetDepthBias or cmdSetDepthBias2EXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_BLEND_CONSTANTS dynamic state enabled then cmdSetBlendConstants must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetColorBlendEnableEXT in the current command buffer set any element of pColorBlendEnables to TRUE, and the most recent call to cmdSetColorBlendEquationEXT in the current command buffer set the same element of pColorBlendEquations to a ColorBlendEquationEXT structure with any BlendFactor member with a value of BLEND_FACTOR_CONSTANT_COLOR, BLEND_FACTOR_ONE_MINUS_CONSTANT_COLOR, BLEND_FACTOR_CONSTANT_ALPHA, or BLEND_FACTOR_ONE_MINUS_CONSTANT_ALPHA, cmdSetBlendConstants must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_BOUNDS dynamic state enabled, and if the current depthBoundsTestEnable state is TRUE, then cmdSetDepthBounds must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetDepthBoundsTestEnable in the current command buffer set depthBoundsTestEnable to TRUE, then cmdSetDepthBounds must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_STENCIL_COMPARE_MASK dynamic state enabled, and if the current stencilTestEnable state is TRUE, then cmdSetStencilCompareMask must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetStencilTestEnable in the current command buffer set stencilTestEnable to TRUE, cmdSetStencilCompareMask must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_STENCIL_WRITE_MASK dynamic state enabled, and if the current stencilTestEnable state is TRUE, then cmdSetStencilWriteMask must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetStencilTestEnable in the current command buffer set stencilTestEnable to TRUE, cmdSetStencilWriteMask must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_STENCIL_REFERENCE dynamic state enabled, and if the current stencilTestEnable state is TRUE, then cmdSetStencilReference must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetStencilTestEnable in the current command buffer set stencilTestEnable to TRUE, cmdSetStencilReference must have been called in the current command buffer prior to this drawing command
• If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
• If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT dynamic state enabled then cmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetSampleLocationsEnableEXT in the current command buffer set sampleLocationsEnable to TRUE, then cmdSetSampleLocationsEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to cmdSetSampleLocationsEXT must equal the rasterizationSamples member of the PipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_CULL_MODE dynamic state enabled then cmdSetCullMode must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetCullMode must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_FRONT_FACE dynamic state enabled then cmdSetFrontFace must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetFrontFace must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_TEST_ENABLE dynamic state enabled then cmdSetDepthTestEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetDepthTestEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_WRITE_ENABLE dynamic state enabled then cmdSetDepthWriteEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetDepthWriteEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_COMPARE_OP dynamic state enabled then cmdSetDepthCompareOp must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetDepthTestEnable in the current command buffer set depthTestEnable to TRUE, then cmdSetDepthCompareOp must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_BOUNDS_TEST_ENABLE dynamic state enabled then cmdSetDepthBoundsTestEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the depthBounds feature is enabled, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then the cmdSetDepthBoundsTestEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_STENCIL_TEST_ENABLE dynamic state enabled then cmdSetStencilTestEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetStencilTestEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_STENCIL_OP dynamic state enabled then cmdSetStencilOp must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetStencilTestEnable in the current command buffer set stencilTestEnable to TRUE, then cmdSetStencilOp must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, then cmdSetViewportWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of cmdSetViewportWithCount must match the PipelineViewportStateCreateInfo::scissorCount of the pipeline
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SCISSOR_WITH_COUNT dynamic state enabled, but not the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, then cmdSetScissorWithCount must have been called in the current command buffer prior to this drawing command, and the scissorCount parameter of cmdSetScissorWithCount must match the PipelineViewportStateCreateInfo::viewportCount of the pipeline
• If the bound graphics pipeline state was created with both the DYNAMIC_STATE_SCISSOR_WITH_COUNT and DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic states enabled then both cmdSetViewportWithCount and cmdSetScissorWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of cmdSetViewportWithCount must match the scissorCount parameter of cmdSetScissorWithCount
• If a shader object is bound to any graphics stage, then both cmdSetViewportWithCount and cmdSetScissorWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of cmdSetViewportWithCount must match the scissorCount parameter of cmdSetScissorWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic state enabled, then the bound graphics pipeline must have been created with PipelineViewportWScalingStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT and DYNAMIC_STATE_VIEWPORT_W_SCALING_NV dynamic states enabled then the viewportCount parameter in the last call to cmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetViewportWScalingEnableNV in the current command buffer set viewportWScalingEnable to TRUE, then cmdSetViewportWScalingNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetViewportWScalingEnableNV in the current command buffer set viewportWScalingEnable to TRUE, then the viewportCount parameter in the last call to cmdSetViewportWScalingNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic state enabled, then the bound graphics pipeline must have been created with PipelineViewportShadingRateImageStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT and DYNAMIC_STATE_VIEWPORT_SHADING_RATE_PALETTE_NV dynamic states enabled then the viewportCount parameter in the last call to cmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetCoarseSampleOrderNV must have been called in the current command buffer prior to this drawing command
• If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetShadingRateImageEnableNV in the current command buffer set shadingRateImageEnable to TRUE, then cmdSetViewportShadingRatePaletteNV must have been called in the current command buffer prior to this drawing command
• If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetShadingRateImageEnableNV in the current command buffer set shadingRateImageEnable to TRUE, then the viewportCount parameter in the last call to cmdSetViewportShadingRatePaletteNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a PipelineViewportSwizzleStateCreateInfoNV structure chained from PipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with PipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled and a PipelineViewportExclusiveScissorStateCreateInfoNV structure chained from PipelineViewportStateCreateInfo, then the bound graphics pipeline must have been created with PipelineViewportExclusiveScissorStateCreateInfoNV::exclusiveScissorCount greater or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_EXCLUSIVE_SCISSOR_ENABLE_NV dynamic state enabled then cmdSetExclusiveScissorEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_EXCLUSIVE_SCISSOR_NV dynamic state enabled then cmdSetExclusiveScissorNV must have been called in the current command buffer prior to this drawing command
• If the exclusiveScissor feature is enabled, and a shader object is bound to any graphics stage, then cmdSetExclusiveScissorEnableNV must have been called in the current command buffer prior to this drawing command
• If the exclusiveScissor feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetExclusiveScissorEnableNV in the current command buffer set any element of pExclusiveScissorEnables to TRUE, then cmdSetExclusiveScissorNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZER_DISCARD_ENABLE dynamic state enabled then cmdSetRasterizerDiscardEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, then cmdSetRasterizerDiscardEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_BIAS_ENABLE dynamic state enabled then cmdSetDepthBiasEnable must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetDepthBiasEnable must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LOGIC_OP_EXT dynamic state enabled then cmdSetLogicOpEXT must have been called in the current command buffer prior to this drawing command and the logicOp must be a valid LogicOp value
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetLogicOpEnableEXT set logicOpEnable to TRUE, then cmdSetLogicOpEXT must have been called in the current command buffer prior to this drawing command and the logicOp must be a valid LogicOp value
• If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, the bound graphics pipeline was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, and any of the shader stages of the bound graphics pipeline write to the PrimitiveShadingRateKHR built-in, then cmdSetViewportWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of cmdSetViewportWithCount must be 1
• If the primitiveFragmentShadingRateWithMultipleViewports limit is not supported, and any shader object bound to a graphics stage writes to the PrimitiveShadingRateKHR built-in, then cmdSetViewportWithCount must have been called in the current command buffer prior to this drawing command, and the viewportCount parameter of cmdSetViewportWithCount must be 1
• If rasterization is not disabled in the bound graphics pipeline, then for each color attachment in the subpass, if the corresponding image view’s format features do not contain FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the blendEnable member of the corresponding element of the pAttachments member of pColorBlendState must be FALSE
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then for each color attachment in the render pass, if the corresponding image view’s format features do not contain FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT, then the corresponding member of pColorBlendEnables in the most recent call to cmdSetColorBlendEnableEXT in the current command buffer that affected that attachment index must have been FALSE
• If rasterization is not disabled in the bound graphics pipeline, and none of the VK_AMD_mixed_attachment_samples extension, the VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature is enabled, then rasterizationSamples for the currently bound graphics pipeline must be the same as the current subpass color and/or depth/stencil attachments
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and none of the VK_AMD_mixed_attachment_samples extension, the VK_NV_framebuffer_mixed_samples extension, or the multisampledRenderToSingleSampled feature is enabled, then the most recent call to cmdSetRasterizationSamplesEXT in the current command buffer must have set rasterizationSamples to be the same as the number of samples for the current render pass color and/or depth/stencil attachments
• If a shader object is bound to any graphics stage, the current render pass instance must have been begun with cmdBeginRendering
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pDepthAttachment is not NULL_HANDLE, and the layout member of pDepthAttachment is IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pStencilAttachment is not NULL_HANDLE, and the layout member of pStencilAttachment is IMAGE_LAYOUT_DEPTH_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pDepthAttachment is not NULL_HANDLE, and the layout member of pDepthAttachment is IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL, this command must not write any values to the depth attachment
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pStencilAttachment is not NULL_HANDLE, and the layout member of pStencilAttachment is IMAGE_LAYOUT_DEPTH_ATTACHMENT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pDepthAttachment is not NULL_HANDLE, and the layout member of pDepthAttachment is IMAGE_LAYOUT_DEPTH_READ_ONLY_OPTIMAL, this command must not write any values to the depth attachment
• If the current render pass instance was begun with cmdBeginRendering, the imageView member of pStencilAttachment is not NULL_HANDLE, and the layout member of pStencilAttachment is IMAGE_LAYOUT_STENCIL_READ_ONLY_OPTIMAL, this command must not write any values to the stencil attachment
• If the current render pass instance was begun with cmdBeginRendering, the currently bound graphics pipeline must have been created with a PipelineRenderingCreateInfo::viewMask equal to RenderingInfo::viewMask
• If the current render pass instance was begun with cmdBeginRendering, the currently bound graphics pipeline must have been created with a PipelineRenderingCreateInfo::colorAttachmentCount equal to RenderingInfo::colorAttachmentCount
• If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with cmdBeginRendering and RenderingInfo::colorAttachmentCount greater than 0, then each element of the RenderingInfo::pColorAttachments array with a imageView not equal to NULL_HANDLE must have been created with a Format equal to the corresponding element of PipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound graphics pipeline
• If the dynamicRenderingUnusedAttachments feature is enabled, and the current render pass instance was begun with cmdBeginRendering and RenderingInfo::colorAttachmentCount greater than 0, then each element of the RenderingInfo::pColorAttachments array with a imageView not equal to NULL_HANDLE must have been created with a Format equal to the corresponding element of PipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound graphics pipeline, or the corresponding element of PipelineRenderingCreateInfo::pColorAttachmentFormats, if it exists, must be FORMAT_UNDEFINED
• If the dynamicRenderingUnusedAttachments feature is not enabled, and the current render pass instance was begun with cmdBeginRendering and RenderingInfo::colorAttachmentCount greater than 0, then each element of the RenderingInfo::pColorAttachments array with a imageView equal to NULL_HANDLE must have the corresponding element of PipelineRenderingCreateInfo::pColorAttachmentFormats used to create the currently bound pipeline equal to FORMAT_UNDEFINED
• If the current render pass instance was begun with cmdBeginRendering, with a RenderingInfo::colorAttachmentCount equal to 1, there is no shader object bound to any graphics stage, and a color attachment with a resolve mode of RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID, each element of the RenderingInfo::pColorAttachments array with a resolveImageView not equal to NULL_HANDLE must have been created with an image created with a ExternalFormatANDROID::externalFormat value equal to the ExternalFormatANDROID::externalFormat value used to create the currently bound graphics pipeline
• If there is no shader object bound to any graphics stage, the current render pass instance was begun with cmdBeginRendering and a RenderingInfo::colorAttachmentCount equal to 1, and a color attachment with a resolve mode of RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID, each element of the RenderingInfo::pColorAttachments array with a imageView not equal to NULL_HANDLE must have been created with an image created with a ExternalFormatANDROID::externalFormat value equal to the ExternalFormatANDROID::externalFormat value used to create the currently bound graphics pipeline
• If the current render pass instance was begun with cmdBeginRendering, there is no shader object bound to any graphics stage, and the currently bound graphics pipeline was created with a non-zero ExternalFormatANDROID::externalFormat value and with the DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled, then cmdSetColorBlendEnableEXT must have set the blend enable to FALSE prior to this drawing command
• If the current render pass instance was begun with cmdBeginRendering, there is no shader object bound to any graphics stage, and the currently bound graphics pipeline was created with a non-zero ExternalFormatANDROID::externalFormat value and with the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled, then cmdSetRasterizationSamplesEXT must have set rasterizationSamples to SAMPLE_COUNT_1_BIT prior to this drawing command
• If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID resolve mode, then cmdSetColorBlendEnableEXT must have set blend enable to FALSE prior to this drawing command
• If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID resolve mode, then cmdSetRasterizationSamplesEXT must have set rasterizationSamples to SAMPLE_COUNT_1_BIT prior to this drawing command
• If the current render pass instance was begun with cmdBeginRendering, there is no shader object bound to any graphics stage, and the currently bound graphics pipeline was created with a non-zero ExternalFormatANDROID::externalFormat value and with the DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR dynamic state enabled, then cmdSetFragmentShadingRateKHR must have set pFragmentSize->width to 1 prior to this drawing command
• If the current render pass instance was begun with cmdBeginRendering, there is no shader object bound to any graphics stage, and the currently bound graphics pipeline was created with a non-zero ExternalFormatANDROID::externalFormat value and with the DYNAMIC_STATE_FRAGMENT_SHADING_RATE_KHR dynamic state enabled, then cmdSetFragmentShadingRateKHR must have set pFragmentSize->height to 1 prior to this drawing command
• If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID resolve mode, then cmdSetFragmentShadingRateKHR must have set pFragmentSize->width to 1 prior to this drawing command
• If there is a shader object bound to any graphics stage, and the current render pass includes a color attachment that uses the RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID resolve mode, then cmdSetFragmentShadingRateKHR must have set pFragmentSize->height to 1 prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then cmdSetColorWriteEnableEXT must have been called in the current command buffer prior to this drawing command
• If the colorWriteEnable feature is enabled on the device, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorWriteEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_WRITE_ENABLE_EXT dynamic state enabled then the attachmentCount parameter of cmdSetColorWriteEnableEXT must be greater than or equal to the PipelineColorBlendStateCreateInfo::attachmentCount of the currently bound graphics pipeline
• If the colorWriteEnable feature is enabled on the device, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then the attachmentCount parameter of most recent call to cmdSetColorWriteEnableEXT in the current command buffer must be greater than or equal to the number of color attachments in the current render pass instance
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DISCARD_RECTANGLE_EXT dynamic state enabled then cmdSetDiscardRectangleEXT must have been called in the current command buffer prior to this drawing command for each discard rectangle in PipelineDiscardRectangleStateCreateInfoEXT::discardRectangleCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DISCARD_RECTANGLE_ENABLE_EXT dynamic state enabled then cmdSetDiscardRectangleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_discard_rectangles extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetDiscardRectangleEnableEXT in the current command buffer set discardRectangleEnable to TRUE, then cmdSetDiscardRectangleEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_discard_rectangles extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetDiscardRectangleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DISCARD_RECTANGLE_MODE_EXT dynamic state enabled then cmdSetDiscardRectangleModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_discard_rectangles extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetDiscardRectangleEnableEXT in the current command buffer set discardRectangleEnable to TRUE, then cmdSetDiscardRectangleModeEXT must have been called in the current command buffer prior to this drawing command
• If the current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and RenderingInfo::pDepthAttachment->imageView was NULL_HANDLE, the value of PipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to FORMAT_UNDEFINED
• If current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and RenderingInfo::pDepthAttachment->imageView was not NULL_HANDLE, the value of PipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline must be equal to the Format used to create RenderingInfo::pDepthAttachment->imageView
• If the current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is enabled, RenderingInfo::pDepthAttachment->imageView was not NULL_HANDLE, and the value of PipelineRenderingCreateInfo::depthAttachmentFormat used to create the currently bound graphics pipeline was not equal to the Format used to create RenderingInfo::pDepthAttachment->imageView, the value of the format must be FORMAT_UNDEFINED
• If the current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and RenderingInfo::pStencilAttachment->imageView was NULL_HANDLE, the value of PipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to FORMAT_UNDEFINED
• If current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is not enabled, and RenderingInfo::pStencilAttachment->imageView was not NULL_HANDLE, the value of PipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline must be equal to the Format used to create RenderingInfo::pStencilAttachment->imageView
• If the current render pass instance was begun with cmdBeginRendering, the dynamicRenderingUnusedAttachments feature is enabled, RenderingInfo::pStencilAttachment->imageView was not NULL_HANDLE, and the value of PipelineRenderingCreateInfo::stencilAttachmentFormat used to create the currently bound graphics pipeline was not equal to the Format used to create RenderingInfo::pStencilAttachment->imageView, the value of the format must be FORMAT_UNDEFINED
• If the current render pass instance was begun with cmdBeginRendering and RenderingFragmentShadingRateAttachmentInfoKHR::imageView was not NULL_HANDLE, the currently bound graphics pipeline must have been created with PIPELINE_CREATE_RENDERING_FRAGMENT_SHADING_RATE_ATTACHMENT_BIT_KHR
• If the current render pass instance was begun with cmdBeginRendering and RenderingFragmentDensityMapAttachmentInfoEXT::imageView was not NULL_HANDLE, the currently bound graphics pipeline must have been created with PIPELINE_CREATE_RENDERING_FRAGMENT_DENSITY_MAP_ATTACHMENT_BIT_EXT
• If the currently bound pipeline was created with a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and the current render pass instance was begun with cmdBeginRendering with a RenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the RenderingInfo::pColorAttachments array with a imageView not equal to NULL_HANDLE must have been created with a sample count equal to the corresponding element of the pColorAttachmentSamples member of AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV used to create the currently bound graphics pipeline
• If the current render pass instance was begun with cmdBeginRendering, the currently bound pipeline was created with a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and RenderingInfo::pDepthAttachment->imageView was not NULL_HANDLE, the value of the depthStencilAttachmentSamples member of AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create RenderingInfo::pDepthAttachment->imageView
• If the current render pass instance was begun with cmdBeginRendering, the currently bound pipeline was created with a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and RenderingInfo::pStencilAttachment->imageView was not NULL_HANDLE, the value of the depthStencilAttachmentSamples member of AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV used to create the currently bound graphics pipeline must be equal to the sample count used to create RenderingInfo::pStencilAttachment->imageView
• If the currently bound pipeline was created without a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and the current render pass instance was begun with cmdBeginRendering with a RenderingInfo::colorAttachmentCount parameter greater than 0, then each element of the RenderingInfo::pColorAttachments array with a imageView not equal to NULL_HANDLE must have been created with a sample count equal to the value of rasterizationSamples for the currently bound graphics pipeline
• If the current render pass instance was begun with cmdBeginRendering, the currently bound pipeline was created without a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and RenderingInfo::pDepthAttachment->imageView was not NULL_HANDLE, the value of rasterizationSamples for the currently bound graphics pipeline must be equal to the sample count used to create RenderingInfo::pDepthAttachment->imageView
• If the current render pass instance was begun with cmdBeginRendering, the currently bound pipeline was created without a AttachmentSampleCountInfoAMD or AttachmentSampleCountInfoNV structure, and the multisampledRenderToSingleSampled feature is not enabled, and RenderingInfo::pStencilAttachment->imageView was not NULL_HANDLE, the value of rasterizationSamples for the currently bound graphics pipeline must be equal to the sample count used to create RenderingInfo::pStencilAttachment->imageView
• If this command has been called inside a render pass instance started with cmdBeginRendering, and the pNext chain of RenderingInfo includes a MultisampledRenderToSingleSampledInfoEXT structure with multisampledRenderToSingleSampledEnable equal to TRUE, then the value of rasterizationSamples for the currently bound graphics pipeline must be equal to MultisampledRenderToSingleSampledInfoEXT::rasterizationSamples
• If the current render pass instance was begun with cmdBeginRendering, the currently bound pipeline must have been created with a GraphicsPipelineCreateInfo::renderPass equal to NULL_HANDLE
• If the current render pass instance was begun with cmdBeginRendering, there is a graphics pipeline bound with a fragment shader that statically writes to a color attachment, the color write mask is not zero, color writes are enabled, and the corresponding element of the RenderingInfo::pColorAttachments->imageView was not NULL_HANDLE, then the corresponding element of PipelineRenderingCreateInfo::pColorAttachmentFormats used to create the pipeline must not be FORMAT_UNDEFINED
• If the current render pass instance was begun with cmdBeginRendering, there is a graphics pipeline bound, depth test is enabled, depth write is enabled, and the RenderingInfo::pDepthAttachment->imageView was not NULL_HANDLE, then the PipelineRenderingCreateInfo::depthAttachmentFormat used to create the pipeline must not be FORMAT_UNDEFINED
• If the current render pass instance was begun with cmdBeginRendering, there is a graphics pipeline bound, stencil test is enabled and the RenderingInfo::pStencilAttachment->imageView was not NULL_HANDLE, then the PipelineRenderingCreateInfo::stencilAttachmentFormat used to create the pipeline must not be FORMAT_UNDEFINED
• If the primitivesGeneratedQueryWithRasterizerDiscard feature is not enabled and the QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, rasterization discard must not be enabled
• If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, the bound graphics pipeline must not have been created with a non-zero value in PipelineRasterizationStateStreamCreateInfoEXT::rasterizationStream
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_TESSELLATION_DOMAIN_ORIGIN_EXT dynamic state enabled then cmdSetTessellationDomainOriginEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_CLAMP_ENABLE_EXT dynamic state enabled then cmdSetDepthClampEnableEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to the SHADER_STAGE_TESSELLATION_EVALUATION_BIT stage, then cmdSetTessellationDomainOriginEXT must have been called in the current command buffer prior to this drawing command
• If the depthClamp feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetDepthClampEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_POLYGON_MODE_EXT dynamic state enabled then cmdSetPolygonModeEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetPolygonModeEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT dynamic state enabled then cmdSetRasterizationSamplesEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetRasterizationSamplesEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_MASK_EXT dynamic state enabled then cmdSetSampleMaskEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetSampleMaskEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled then cmdSetAlphaToCoverageEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_ALPHA_TO_COVERAGE_ENABLE_EXT dynamic state enabled, and alphaToCoverageEnable was TRUE in the last call to cmdSetAlphaToCoverageEnableEXT, then the Fragment Output Interface must contain a variable for the alpha Component word in Location 0 at Index 0
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetAlphaToCoverageEnableEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to any graphics stage, and the most recent call to cmdSetAlphaToCoverageEnableEXT in the current command buffer set alphaToCoverageEnable to TRUE, then the Fragment Output Interface must contain a variable for the alpha Component word in Location 0 at Index 0
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_ALPHA_TO_ONE_ENABLE_EXT dynamic state enabled then cmdSetAlphaToOneEnableEXT must have been called in the current command buffer prior to this drawing command
• If the alphaToOne feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetAlphaToOneEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LOGIC_OP_ENABLE_EXT dynamic state enabled then cmdSetLogicOpEnableEXT must have been called in the current command buffer prior to this drawing command
• If the logicOp feature is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetLogicOpEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then cmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then cmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetColorBlendEnableEXT for any attachment set that attachment’s value in pColorBlendEnables to TRUE, then cmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then cmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZATION_STREAM_EXT dynamic state enabled then cmdSetRasterizationStreamEXT must have been called in the current command buffer prior to this drawing command
• If the geometryStreams feature is enabled, and a shader object is bound to the SHADER_STAGE_GEOMETRY_BIT stage, then cmdSetRasterizationStreamEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled then cmdSetConservativeRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_conservative_rasterization extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetConservativeRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_EXTRA_PRIMITIVE_OVERESTIMATION_SIZE_EXT dynamic state enabled then cmdSetExtraPrimitiveOverestimationSizeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_conservative_rasterization extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetConservativeRasterizationModeEXT in the current command buffer set conservativeRasterizationMode to CONSERVATIVE_RASTERIZATION_MODE_OVERESTIMATE_EXT, then cmdSetExtraPrimitiveOverestimationSizeEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_CLIP_ENABLE_EXT dynamic state enabled then cmdSetDepthClipEnableEXT must have been called in the current command buffer prior to this drawing command
• If the depthClipEnable feature is enabled, and a shader object is bound to any graphics stage, then cmdSetDepthClipEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT dynamic state enabled then cmdSetSampleLocationsEnableEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_sample_locations extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetSampleLocationsEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then cmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_blend_operation_advanced extension is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then at least one of cmdSetColorBlendEquationEXT and cmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_PROVOKING_VERTEX_MODE_EXT dynamic state enabled then cmdSetProvokingVertexModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_provoking_vertex extension is enabled, and a shader object is bound to the SHADER_STAGE_VERTEX_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetProvokingVertexModeEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic state enabled then cmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPolygonModeEXT in the current command buffer set polygonMode to POLYGON_MODE_LINE, then cmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object is bound to the SHADER_STAGE_VERTEX_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPrimitiveTopology in the current command buffer set primitiveTopology to any line topology, then cmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object that outputs line primitives is bound to the SHADER_STAGE_TESSELLATION_EVALUATION_BIT or SHADER_STAGE_GEOMETRY_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetLineRasterizationModeEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT dynamic state enabled then cmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPolygonModeEXT in the current command buffer set polygonMode to POLYGON_MODE_LINE, then cmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object is bound to the SHADER_STAGE_VERTEX_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetPrimitiveTopology in the current command buffer set primitiveTopology to any line topology, then cmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object that outputs line primitives is bound to the SHADER_STAGE_TESSELLATION_EVALUATION_BIT or SHADER_STAGE_GEOMETRY_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetLineStippleEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_EXT dynamic state enabled then cmdSetLineStippleEXT must have been called in the current command buffer prior to this drawing command
• If the VK_EXT_line_rasterization extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetLineStippleEnableEXT in the current command buffer set stippledLineEnable to TRUE, then cmdSetLineStippleEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_DEPTH_CLIP_NEGATIVE_ONE_TO_ONE_EXT dynamic state enabled then cmdSetDepthClipNegativeOneToOneEXT must have been called in the current command buffer prior to this drawing command
• If the depthClipControl feature is enabled, and a shader object is bound to any graphics stage, then cmdSetDepthClipNegativeOneToOneEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_W_SCALING_ENABLE_NV dynamic state enabled then cmdSetViewportWScalingEnableNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_clip_space_w_scaling extension is enabled, and a shader object is bound to any graphics stage, then cmdSetViewportWScalingEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled then cmdSetViewportSwizzleNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_viewport_swizzle extension is enabled, and a shader object is bound to any graphics stage, then cmdSetViewportSwizzleNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV dynamic state enabled then cmdSetCoverageToColorEnableNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_fragment_coverage_to_color extension is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetCoverageToColorEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_TO_COLOR_LOCATION_NV dynamic state enabled then cmdSetCoverageToColorLocationNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_fragment_coverage_to_color extension is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetCoverageToColorEnableNV in the current command buffer set coverageToColorEnable to TRUE, then cmdSetCoverageToColorLocationNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_MODULATION_MODE_NV dynamic state enabled then cmdSetCoverageModulationModeNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_framebuffer_mixed_samples extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetCoverageModulationModeNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV dynamic state enabled then cmdSetCoverageModulationTableEnableNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_framebuffer_mixed_samples extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetCoverageModulationModeNV in the current command buffer set coverageModulationMode to any value other than COVERAGE_MODULATION_MODE_NONE_NV, then cmdSetCoverageModulationTableEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_NV dynamic state enabled then cmdSetCoverageModulationTableNV must have been called in the current command buffer prior to this drawing command
• If the VK_NV_framebuffer_mixed_samples extension is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the most recent call to cmdSetCoverageModulationTableEnableNV in the current command buffer set coverageModulationTableEnable to TRUE, then cmdSetCoverageModulationTableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SHADING_RATE_IMAGE_ENABLE_NV dynamic state enabled then cmdSetShadingRateImageEnableNV must have been called in the current command buffer prior to this drawing command
• If the pipelineFragmentShadingRate feature is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetFragmentShadingRateKHR must have been called in the current command buffer prior to this drawing command
• If the shadingRateImage feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetShadingRateImageEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_REPRESENTATIVE_FRAGMENT_TEST_ENABLE_NV dynamic state enabled then cmdSetRepresentativeFragmentTestEnableNV must have been called in the current command buffer prior to this drawing command
• If the representativeFragmentTest feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetRepresentativeFragmentTestEnableNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_REDUCTION_MODE_NV dynamic state enabled then cmdSetCoverageReductionModeNV must have been called in the current command buffer prior to this drawing command
• If the coverageReductionMode feature is enabled, and a shader object is bound to any graphics stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetCoverageReductionModeNV must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT state enabled and the last call to cmdSetColorBlendEnableEXT set pColorBlendEnables for any attachment to TRUE, then for those attachments in the subpass the corresponding image view’s format features must contain FORMAT_FEATURE_COLOR_ATTACHMENT_BLEND_BIT
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and the current subpass does not use any color and/or depth/stencil attachments, then the rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT must follow the rules for a zero-attachment subpass
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_MASK_EXT state enabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the samples parameter in the last call to cmdSetSampleMaskEXT must be greater or equal to the PipelineMultisampleStateCreateInfo::rasterizationSamples parameter used to create the bound graphics pipeline
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_MASK_EXT state and DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, then the samples parameter in the last call to cmdSetSampleMaskEXT must be greater or equal to the rasterizationSamples parameter in the last call to cmdSetRasterizationSamplesEXT
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, and neither the VK_AMD_mixed_attachment_samples nor the VK_NV_framebuffer_mixed_samples extensions are enabled, then the rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT must be the same as the current subpass color and/or depth/stencil attachments
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, or a shader object is bound to any graphics stage, and the current render pass instance includes a MultisampledRenderToSingleSampledInfoEXT structure with multisampledRenderToSingleSampledEnable equal to TRUE, then the rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT must be the same as the rasterizationSamples member of that structure
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic state enabled then cmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorBlendEnableEXT calls must specify an enable for all active color attachments in the current subpass
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorBlendEnableEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorBlendEnableEXT calls must specify an enable for all active color attachments in the current subpass
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_EQUATION_EXT dynamic state enabled then cmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorBlendEquationEXT calls must specify the blend equations for all active color attachments in the current subpass where blending is enabled
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorBlendEquationEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorBlendEquationEXT calls must specify the blend equations for all active color attachments in the current subpass where blending is enabled
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_WRITE_MASK_EXT dynamic state enabled then cmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorWriteMaskEXT calls must specify the color write mask for all active color attachments in the current subpass
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetColorWriteMaskEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorWriteMaskEXT calls must specify the color write mask for all active color attachments in the current subpass
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT dynamic state enabled then cmdSetColorBlendAdvancedEXT must have been called in the current command buffer prior to this drawing command, and the attachments specified by the firstAttachment and attachmentCount parameters of cmdSetColorBlendAdvancedEXT calls must specify the advanced blend equations for all active color attachments in the current subpass where blending is enabled
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COLOR_BLEND_ADVANCED_EXT and DYNAMIC_STATE_COLOR_BLEND_ENABLE_EXT dynamic states enabled and the last calls to cmdSetColorBlendEnableEXT and cmdSetColorBlendAdvancedEXT have enabled advanced blending, then the number of active color attachments in the current subpass must not exceed advancedBlendMaxColorAttachments
• If the primitivesGeneratedQueryWithNonZeroStreams feature is not enabled and the QUERY_TYPE_PRIMITIVES_GENERATED_EXT query is active, and the bound graphics pipeline was created with DYNAMIC_STATE_RASTERIZATION_STREAM_EXT state enabled, the last call to cmdSetRasterizationStreamEXT must have set the rasterizationStream to zero
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state disabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to cmdSetSampleLocationsEXT must equal the rasterizationSamples member of the PipelineMultisampleStateCreateInfo structure the bound graphics pipeline has been created with
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, then the sampleLocationsPerPixel member of pSampleLocationsInfo in the last call to cmdSetSampleLocationsEXT must equal the rasterizationSamples parameter of the last call to cmdSetRasterizationSamplesEXT
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and sampleLocationsEnable was TRUE in the last call to cmdSetSampleLocationsEnableEXT, and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was TRUE in the last call to cmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.width in the last call to cmdSetSampleLocationsEXT must evenly divide MultisamplePropertiesEXT::sampleLocationGridSize.width as returned by getPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state enabled and the DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was TRUE in the last call to cmdSetSampleLocationsEnableEXT, then the sampleLocationsInfo.sampleLocationGridSize.height in the last call to cmdSetSampleLocationsEXT must evenly divide MultisamplePropertiesEXT::sampleLocationGridSize.height as returned by getPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling rasterizationSamples
• If a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, or the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, and if sampleLocationsEnable was TRUE in the last call to cmdSetSampleLocationsEnableEXT, the fragment shader code must not statically use the extended instruction InterpolateAtSample
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, the sampleLocationsEnable member of a PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable in the bound graphics pipeline is TRUE or DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, then, sampleLocationsInfo.sampleLocationGridSize.width must evenly divide MultisamplePropertiesEXT::sampleLocationGridSize.width as returned by getPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling the value of rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, the sampleLocationsEnable member of a PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable in the bound graphics pipeline is TRUE or DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, then, sampleLocationsInfo.sampleLocationGridSize.height must evenly divide MultisamplePropertiesEXT::sampleLocationGridSize.height as returned by getPhysicalDeviceMultisamplePropertiesEXT with a samples parameter equaling the value of rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_SAMPLE_LOCATIONS_EXT state disabled and the DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT state enabled, the sampleLocationsEnable member of a PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable in the bound graphics pipeline is TRUE or DYNAMIC_STATE_SAMPLE_LOCATIONS_ENABLE_EXT state enabled, then, sampleLocationsInfo.sampleLocationsPerPixel must equal rasterizationSamples in the last call to cmdSetRasterizationSamplesEXT
• If a shader object is bound to any graphics stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_MODULATION_TABLE_ENABLE_NV state enabled, and the last call to cmdSetCoverageModulationTableEnableNV set coverageModulationTableEnable to TRUE, then the coverageModulationTableCount parameter in the last call to cmdSetCoverageModulationTableNV must equal the current rasterizationSamples divided by the number of color samples in the current subpass
• If the VK_NV_framebuffer_mixed_samples extension is enabled, and if current subpass has a depth/stencil attachment and depth test, stencil test, or depth bounds test are enabled in the currently bound pipeline state, then the current rasterizationSamples must be the same as the sample count of the depth/stencil attachment
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV state enabled and the last call to cmdSetCoverageToColorEnableNV set the coverageToColorEnable to TRUE, then the current subpass must have a color attachment at the location selected by the last call to cmdSetCoverageToColorLocationNV coverageToColorLocation, with a Format of FORMAT_R8_UINT, FORMAT_R8_SINT, FORMAT_R16_UINT, FORMAT_R16_SINT, FORMAT_R32_UINT, or FORMAT_R32_SINT
• If the VK_NV_fragment_coverage_to_color extension is enabled, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, and the last call to cmdSetCoverageToColorEnableNV set the coverageToColorEnable to TRUE, then the current subpass must have a color attachment at the location selected by the last call to cmdSetCoverageToColorLocationNV coverageToColorLocation, with a Format of FORMAT_R8_UINT, FORMAT_R8_SINT, FORMAT_R16_UINT, FORMAT_R16_SINT, FORMAT_R32_UINT, or FORMAT_R32_SINT
• If this VK_NV_coverage_reduction_mode extension is enabled, the bound graphics pipeline state was created with the DYNAMIC_STATE_COVERAGE_TO_COLOR_ENABLE_NV and DYNAMIC_STATE_RASTERIZATION_SAMPLES_EXT states enabled, the current coverage reduction mode coverageReductionMode, then the current rasterizationSamples, and the sample counts for the color and depth/stencil attachments (if the subpass has them) must be a valid combination returned by getPhysicalDeviceSupportedFramebufferMixedSamplesCombinationsNV
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT dynamic state enabled, but not the DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic state enabled, then the bound graphics pipeline must have been created with PipelineViewportSwizzleStateCreateInfoNV::viewportCount greater or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_VIEWPORT_WITH_COUNT and DYNAMIC_STATE_VIEWPORT_SWIZZLE_NV dynamic states enabled then the viewportCount parameter in the last call to cmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the VK_NV_viewport_swizzle extension is enabled, and a shader object is bound to any graphics stage, then the viewportCount parameter in the last call to cmdSetViewportSwizzleNV must be greater than or equal to the viewportCount parameter in the last call to cmdSetViewportWithCount
• If the VK_NV_framebuffer_mixed_samples extension is enabled, and if the current subpass has any color attachments and rasterizationSamples of the last call to cmdSetRasterizationSamplesEXT is greater than the number of color samples, then the pipeline sampleShadingEnable must be FALSE
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is TRUE and the current lineRasterizationMode state is LINE_RASTERIZATION_MODE_RECTANGULAR_EXT, then the stippledRectangularLines feature must be enabled
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is TRUE and the current lineRasterizationMode state is LINE_RASTERIZATION_MODE_BRESENHAM_EXT, then the stippledBresenhamLines feature must be enabled
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is TRUE and the current lineRasterizationMode state is LINE_RASTERIZATION_MODE_RECTANGULAR_SMOOTH_EXT, then the stippledSmoothLines feature must be enabled
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_LINE_STIPPLE_ENABLE_EXT or DYNAMIC_STATE_LINE_RASTERIZATION_MODE_EXT dynamic states enabled, and if the current stippledLineEnable state is TRUE and the current lineRasterizationMode state is LINE_RASTERIZATION_MODE_DEFAULT_EXT, then the stippledRectangularLines feature must be enabled and PhysicalDeviceLimits::strictLines must be TRUE
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_CONSERVATIVE_RASTERIZATION_MODE_EXT dynamic state enabled, conservativePointAndLineRasterization is not supported, and the effective primitive topology output by the last pre-rasterization shader stage is a line or point, then the conservativeRasterizationMode set by the last call to cmdSetConservativeRasterizationModeEXT must be CONSERVATIVE_RASTERIZATION_MODE_DISABLED_EXT
• If the currently bound pipeline was created with the PipelineShaderStageCreateInfo::stage member of an element of GraphicsPipelineCreateInfo::pStages set to SHADER_STAGE_VERTEX_BIT, SHADER_STAGE_TESSELLATION_CONTROL_BIT, SHADER_STAGE_TESSELLATION_EVALUATION_BIT or SHADER_STAGE_GEOMETRY_BIT, then Mesh Shader Queries must not be active
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_ATTACHMENT_FEEDBACK_LOOP_ENABLE_EXT dynamic state cmdSetAttachmentFeedbackLoopEnableEXT must have been called in the current command buffer prior to this drawing command
• If dynamic state was inherited from CommandBufferInheritanceViewportScissorInfoNV, it must be set in the current command buffer prior to this drawing command
• If there is no bound graphics pipeline, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_VERTEX_BIT
• If there is no bound graphics pipeline, and the tessellationShader feature is enabled, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_TESSELLATION_CONTROL_BIT
• If there is no bound graphics pipeline, and the tessellationShader feature is enabled, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_TESSELLATION_EVALUATION_BIT
• If there is no bound graphics pipeline, and the geometryShader feature is enabled, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_GEOMETRY_BIT
• If there is no bound graphics pipeline, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_FRAGMENT_BIT
• If there is no bound graphics pipeline, and the taskShader feature is enabled, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_TASK_BIT_EXT
• If there is no bound graphics pipeline, and the meshShader feature is enabled, cmdBindShadersEXT must have been called in the current command buffer with pStages with an element of SHADER_STAGE_MESH_BIT_EXT
• If there is no bound graphics pipeline, and at least one of the taskShader and meshShader features is enabled, one of the SHADER_STAGE_VERTEX_BIT or SHADER_STAGE_MESH_BIT_EXT stages must have a valid ShaderEXT bound, and the other must have no ShaderEXT bound
• If there is no bound graphics pipeline, and both the taskShader and meshShader features are enabled, and a valid ShaderEXT is bound the to the SHADER_STAGE_MESH_BIT_EXT stage, and that ShaderEXT was created without the SHADER_CREATE_NO_TASK_SHADER_BIT_EXT flag, a valid ShaderEXT must be bound to the SHADER_STAGE_TASK_BIT_EXT stage
• If there is no bound graphics pipeline, and both the taskShader and meshShader features are enabled, and a valid ShaderEXT is bound the to the SHADER_STAGE_MESH_BIT_EXT stage, and that ShaderEXT was created with the SHADER_CREATE_NO_TASK_SHADER_BIT_EXT flag, there must be no ShaderEXT bound to the SHADER_STAGE_TASK_BIT_EXT stage
• If there is no bound graphics pipeline, and a valid ShaderEXT is bound to the SHADER_STAGE_VERTEX_BIT stage, there must be no ShaderEXT bound to either the SHADER_STAGE_TASK_BIT_EXT stage or the SHADER_STAGE_MESH_BIT_EXT stage
• If any graphics shader is bound which was created with the SHADER_CREATE_LINK_STAGE_BIT_EXT flag, then all shaders created with the SHADER_CREATE_LINK_STAGE_BIT_EXT flag in the same createShadersEXT call must also be bound
• If any graphics shader is bound which was created with the SHADER_CREATE_LINK_STAGE_BIT_EXT flag, any stages in between stages whose shaders which did not create a shader with the SHADER_CREATE_LINK_STAGE_BIT_EXT flag as part of the same createShadersEXT call must not have any ShaderEXT bound
• All bound graphics shader objects must have been created with identical or identically defined push constant ranges
• All bound graphics shader objects must have been created with identical or identically defined arrays of descriptor set layouts
• If the current render pass instance was begun with cmdBeginRendering and a RenderingInfo::colorAttachmentCount equal to 1, a color attachment with a resolve mode of RESOLVE_MODE_EXTERNAL_FORMAT_DOWNSAMPLE_ANDROID, and a fragment shader is bound, it must not declare the DepthReplacing or StencilRefReplacingEXT execution modes
• If the attachmentFeedbackLoopDynamicState feature is enabled on the device, and a shader object is bound to the SHADER_STAGE_FRAGMENT_BIT stage, and the most recent call to cmdSetRasterizerDiscardEnable in the current command buffer set rasterizerDiscardEnable to FALSE, then cmdSetAttachmentFeedbackLoopEnableEXT must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state includes a fragment shader stage, was created with DYNAMIC_STATE_DEPTH_WRITE_ENABLE set in PipelineDynamicStateCreateInfo::pDynamicStates, and the fragment shader declares the EarlyFragmentTests execution mode and uses OpDepthAttachmentReadEXT, the depthWriteEnable parameter in the last call to cmdSetDepthWriteEnable must be FALSE
• If the bound graphics pipeline state includes a fragment shader stage, was created with DYNAMIC_STATE_STENCIL_WRITE_MASK set in PipelineDynamicStateCreateInfo::pDynamicStates, and the fragment shader declares the EarlyFragmentTests execution mode and uses OpStencilAttachmentReadEXT, the writeMask parameter in the last call to cmdSetStencilWriteMask must be 0
• If a shader object is bound to any graphics stage or the currently bound graphics pipeline was created with DYNAMIC_STATE_COLOR_WRITE_MASK_EXT, and the format of any color attachment is FORMAT_E5B9G9R9_UFLOAT_PACK32, the corresponding element of the pColorWriteMasks parameter of cmdSetColorWriteMaskEXT must either include all of COLOR_COMPONENT_R_BIT, COLOR_COMPONENT_G_BIT, and COLOR_COMPONENT_B_BIT, or none of them
• If blending is enabled for any attachment where either the source or destination blend factors for that attachment use the secondary color input, the maximum value of Location for any output attachment statically used in the Fragment Execution Model executed by this command must be less than maxFragmentDualSrcAttachments
• All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or NULL_HANDLE buffers bound
• If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be NULL_HANDLE
• For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in ???
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_PRIMITIVE_TOPOLOGY dynamic state enabled then cmdSetPrimitiveTopology must have been called in the current command buffer prior to this drawing command
• If the bound graphics pipeline state was created with the DYNAMIC_STATE_PRIMITIVE_TOPOLOGY dynamic state enabled and the dynamicPrimitiveTopologyUnrestricted is FALSE, then the primitiveTopology parameter of cmdSetPrimitiveTopology must be of the same topology class as the pipeline PipelineInputAssemblyStateCreateInfo::topology state
• If the bound graphics pipeline was created with both the DYNAMIC_STATE_VERTEX_INPUT_EXT and DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic states enabled, then cmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command
• If the bound graphics pipeline was created with the DYNAMIC_STATE_VERTEX_INPUT_BINDING_STRIDE_EXT dynamic state enabled, but not the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled, then cmdBindVertexBuffers2EXT must have been called in the current command buffer prior to this draw command, and the pStrides parameter of cmdBindVertexBuffers2EXT must not be NULL
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled then cmdSetVertexInputEXT must have been called in the current command buffer prior to this draw command
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled then all variables with the Input storage class decorated with Location in the Vertex Execution Model OpEntryPoint must contain a location in VertexInputAttributeDescription2EXT::location
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled then the numeric type associated with all Input variables of the corresponding Location in the Vertex Execution Model OpEntryPoint must be the same as VertexInputAttributeDescription2EXT::format
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled and VertexInputAttributeDescription2EXT::format has a 64-bit component, then the scalar width associated with all Input variables of the corresponding Location in the Vertex Execution Model OpEntryPoint must be 64-bit
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled and the scalar width associated with a Location decorated Input variable in the Vertex Execution Model OpEntryPoint is 64-bit, then the corresponding VertexInputAttributeDescription2EXT::format must have a 64-bit component
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_VERTEX_INPUT_EXT dynamic state enabled and VertexInputAttributeDescription2EXT::format has a 64-bit component, then all Input variables at the corresponding Location in the Vertex Execution Model OpEntryPoint must not use components that are not present in the format
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage and the most recent call to cmdSetPrimitiveTopology in the current command buffer set primitiveTopology to PRIMITIVE_TOPOLOGY_PATCH_LIST, or the bound graphics pipeline state was created with the DYNAMIC_STATE_PATCH_CONTROL_POINTS_EXT dynamic state enabled then cmdSetPatchControlPointsEXT must have been called in the current command buffer prior to this drawing command
• If there is a shader object bound to the SHADER_STAGE_VERTEX_BIT stage or the bound graphics pipeline state was created with the DYNAMIC_STATE_PRIMITIVE_RESTART_ENABLE dynamic state enabled then cmdSetPrimitiveRestartEnable must have been called in the current command buffer prior to this drawing command
• The bound graphics pipeline must not have been created with the PipelineShaderStageCreateInfo::stage member of an element of GraphicsPipelineCreateInfo::pStages set to SHADER_STAGE_TASK_BIT_EXT or SHADER_STAGE_MESH_BIT_EXT
• There must be no shader object bound to either of the SHADER_STAGE_TASK_BIT_EXT or SHADER_STAGE_MESH_BIT_EXT stages
• PhysicalDeviceTransformFeedbackFeaturesEXT::transformFeedback must be enabled
• The implementation must support PhysicalDeviceTransformFeedbackPropertiesEXT::transformFeedbackDraw
• vertexStride must be greater than 0 and less than or equal to PhysicalDeviceTransformFeedbackPropertiesEXT::maxTransformFeedbackBufferDataStride
• If counterBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
• counterBuffer must have been created with the BUFFER_USAGE_INDIRECT_BUFFER_BIT bit set
• counterBufferOffset must be a multiple of 4
• commandBuffer must not be a protected command buffer

Valid Usage (Implicit)

• commandBuffer must be a valid CommandBuffer handle

• counterBuffer must be a valid Buffer handle
• commandBuffer must be in the recording state
• The CommandPool that commandBuffer was allocated from must support graphics operations
• This command must only be called inside of a render pass instance
• This command must only be called outside of a video coding scope
• Both of commandBuffer, and counterBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

• Host access to commandBuffer must be externally synchronized

• Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

See Also

VK_EXT_transform_feedback, Buffer, CommandBuffer, DeviceSize

VkPhysicalDeviceTransformFeedbackFeaturesEXT - Structure describing transform feedback features that can be supported by an implementation

Members

This structure describes the following features:

Description

If the PhysicalDeviceTransformFeedbackFeaturesEXT structure is included in the pNext chain of the PhysicalDeviceFeatures2 structure passed to getPhysicalDeviceFeatures2, it is filled in to indicate whether each corresponding feature is supported. PhysicalDeviceTransformFeedbackFeaturesEXT can also be used in the pNext chain of DeviceCreateInfo to selectively enable these features.

Valid Usage (Implicit)

See Also

VK_EXT_transform_feedback, Bool32, StructureType

VkPhysicalDeviceTransformFeedbackPropertiesEXT - Structure describing transform feedback properties that can be supported by an implementation

Description

If the PhysicalDeviceTransformFeedbackPropertiesEXT structure is included in the pNext chain of the PhysicalDeviceProperties2 structure passed to getPhysicalDeviceProperties2, it is filled in with each corresponding implementation-dependent property.

Valid Usage (Implicit)

See Also

VK_EXT_transform_feedback, Bool32, DeviceSize, StructureType

VkPipelineRasterizationStateStreamCreateInfoEXT - Structure defining the geometry stream used for rasterization

Description

If this structure is not present, rasterizationStream is assumed to be zero.

Valid Usage (Implicit)

See Also

VK_EXT_transform_feedback, PipelineRasterizationStateStreamCreateFlagsEXT, StructureType

VkPipelineRasterizationStateStreamCreateFlagsEXT - Reserved for future use

Description

PipelineRasterizationStateStreamCreateFlagsEXT is a bitmask type for setting a mask, but is currently reserved for future use.

See Also

VK_EXT_transform_feedback, PipelineRasterizationStateStreamCreateInfoEXT