1.5.1 (October 2023)

• Require building with versions >= 6.0.2.

1.5 (July 2023)

• Allow building with GHC 9.6.

• The MonadTrans (PartialT sym) instance now has a IsExpr (SymExpr sym) constraint in its instance context. (This is a requirement imposed by MonadTrans gaining a quantified Monad superclass in mtl-2.3.)

• Make what4 simplify expressions of the form (bvult (bvadd a c) (bvadd b c)) to (bvult a b) when it is sound to do so.

1.4 (January 2023)

• Allow building with GHC 9.4.

• Remove the MonadFail instance for VarRecorder, as this instance is no longer straightforward to define due to upstream changes in base-4.17.0.0. This instance ultimately called error anyways, so any uses of fail at type VarRecorder can be replaced with error without any change in behavior.

• Remove a dependency on data-binary-ieee754, which has been deprecated.

• Deprecate allSupported which represents the SMT logic ALL_SUPPORTED, and add allLogic instead which represents the SMTLib standard logic ALL.

• Add support for the cvc5 SMT solver.

• Add a get-abduct feature which is compatible with cvc5.

• Add modules to support serialization and deserialization of what4 terms into an s-expression format that is a superset of SMTLib2. See the What4.Serialize.Printer, What4.Serialize.Parser, and What4.Serialize.FastSExpr modules. Note that these modules have names that conflict with the now deprecated what4-serialize package, from which they were copied. If you are updating to this version of what4, delete your dependency on what4-serialize.

• Add support Syntax-Guided Synthesis (SyGuS) in CVC5 (through the runCVC5SyGuS function) and Constrained Horn Clauses (CHC) in Z3 (through the runZ3Horn function).

• Make what4 smarter about simplifying intMin x y and intMax x y expressions when either x <= y or y <= x can be statically determined.

1.3 (April 2022)

• Allow building with GHC 9.2.

• According to this discussion, the forall identifier will be claimed, and forall made into a full keyword. Therefore, the forall and exists combinators of What4.Protocol.SMTLib2.Syntax have been renamed into forall_ and exists_.

• Add operations for increased control over the scope of configuration options, both in the What4.Config and What4.Expr.Builder modules.

• Previously, the exprCounter, sbUserState, sbUnaryThreshold, and sbCacheStartSize fields of ExprBuilder were directly exposed; in principle this allows users to modify them, which was not intended in some cases. These have been uniformly renamed to remove the sb prefix, and exposed as Getter or Lens values instead, as appropriate.

• The sbBVDomainRangeLimit fields of ExprBuilder was obsolete and has been removed.

• Allow building with hashable-1.4.*:

  • Add Eq instances for all data types with Hashable instances that were missing corresponding Eq instances. This is required since hashable-1.4.0.0 adds an Eq superclass to Hashable.
  • Some Hashable instances now have extra constraints to match the constraints in their corresponding Eq instances. For example, the Hashable instance for SymNat now has an extra TestEquality constraint to match its Eq instance.

• Add an unsafeSetAbstractValue function to the IsExpr class which allows one to manually set the AbstractValue used in a symbolic expression. As the name suggests, this function is unsound in the general case, so use this with caution.

• Add a What4.Utils.ResolveBounds.BV module, which provides a resolveSymBV function that checks if a SymBV is concrete. If it is not concrete, it returns the lower and upper version bounds, as determined by querying an online SMT solver.

• Add arrayCopy, arraySet, and arrayRangeEq methods to IsExprBuilder.

• Add a getUnannotatedTerm method to IsExprBuilder for retrieving the original, unannotated term out of an annotated term.

• IsExprBuilder now has floatSpecialFunction{,0,1,2} and realSpecialFunction{,0,1,2} methods which allow the use of special values or functions such as pi, trigonometric functions, exponentials, or logarithms. Similarly, IsInterpretedFloatExprBuilder now has iFloatSpecialFunction{,0,1,2} methods. Although little solver support exists for special functions, what4 may be able to prove properties about them in limited cases.

  • The realPi, realLog, realExp, realSin, realCos, realTan, realSinh, realCosh, realTanh, and realAtan2 methods of IsExprBuilder now have default implementations in terms of realSpecialFunction{,0,1,2}.

• Add an exprUninterpConstants method to IsSymExprBuilder which returns the set of uninterpreted constants in a symbolic expression.

• Add a natToIntegerPure function which behaves like natToInteger but without using IO.

• asConcrete now supports concretizing float expressions by way of the new ConcreteFloat constructor in ConcreteVal.

• Add a z3Tactic configuration option to What4.Solver.Z3 that allows specifying a custom tactic to pass to z3.

• safeSymbol now replaces exclamation marks (!) with underscores (_) so that the generated names are legal in Verilog.

• Add Foldable, Traversable, and Show instances for LabeledPred.

• Fix a bug in which what4 would generate incorrect SMTLib code for array lookups and updates when using the CVC4 backend.

• Fix a bug in which what4 would incorrectly attempt to configure Boolector 3.2.2 or later.

• Fix a bug in which strings containing \u or ending with \ would be escaped incorrectly.

1.2.1 (June 2021)

• Include test suite data in the Hackage tarball.

1.2 (June 2021)

This is primarily a bugfix release, but also adds support for GHC 9.x

• Tweaks to the SolverEvent data type to remove partial fields.

• Fix issue #126. The shift operations of What4.SWord were not correctly handling cases where the shift amount has more bits than the word to be shifted.

• Fix issue #121. The ordering of inputs in generated Verilog files is now more predictable. Previously, it was determined by the order the inputs were encountered during term traversal. Now the user can provide a list of (input, name) pairs which are declared in order. Any additional inputs discovered during traversal will be added after these specified inputs.

• Fix issue #113. The bvSliceLE and bvSliceBE functions of What4.SWord did not properly handle size 0 bit-vectors and requests for 0 length slices. They now correctly fail for slice lengths longer than 0 on 0-length vectors, and correctly allow 0 length slices regardless of the length of the input.

• Fix issue #103. Some of the string operations would give incorrect results when string offsets are out-of-bounds. The SMTLib 2.6 standard specifies precise results for these cases, which we now implement.

• Configuration parameters relative to solvers have been renamed in a more consistent and heirarchical fashion; the old configuration parameters still work but will emit deprecation warnings when used.

  • default_solver --> solver.default
  • abc_path --> solver.abc.path
  • boolector_path --> solver.boolector.path
  • cvc4_path --> solver.cvc4.path
  • cvc4.random-seed --> solver.cvc4.random-seed
  • cvc4_timeout --> solver.cvc4.timeout
  • dreal_path --> solver.dreal.path
  • stp_path --> solver.stp.path
  • stp.random-seed --> solver.stp.random-seed
  • yices_path --> solver.yices.path
  • yices_enable-mcsat --> solver.yices.enable-mcsat
  • yices_enable-interactive --> solver.yices.enable-interactive
  • yices_goal_timeout --> solver.yices.goal-timeout
  • yices.* --> solver.yices.* for many yices internal options
  • z3_path --> solver.z3.path
  • z3_timeout --> solver.z3.timeout

• Added the solver.strict_parsing configuration parameter. This is enabled by default but could be disabled to allow running solvers in debug mode or to workaround other unexpected output from solver processes.

1.1 (February 2021)

• Use multithread-safe storage primitive for configuration options, and clarify single-threaded use assumptions for other data structures.

• Fix issue #63, which caused traversals to include the bodies of defined functions at call sites, which yielded confusing results.

• Add concrete evaluation and constant folding for floating-point operations via the libBF library.

• Add min and max operations for integers and reals to the expression interface.

• Remove BaseNatType from the set of base types. There were bugs relating to having nat types appear in structs, arrays and functions that were difficult to fix. Natural number values are still available as scalars (where they are represented by integers with nonzero assumptions) via the SymNat type.

• Support for exporting What4 terms to Verilog syntax.

• Various documentation fixes and improvements.

• Test coverage improvements.

• Switch to use the prettyprinter package for user-facing output.

1.0 (July 2020)

• Initial Hackage release