Safe Haskell	None
Language	Haskell2010

Vulkan.Extensions.VK_NV_mesh_shader

Synopsis

cmdDrawMeshTasksNV :: forall io. MonadIO io => CommandBuffer -> ("taskCount" ::: Word32) -> ("firstTask" ::: Word32) -> io ()
cmdDrawMeshTasksIndirectNV :: forall io. MonadIO io => CommandBuffer -> Buffer -> ("offset" ::: DeviceSize) -> ("drawCount" ::: Word32) -> ("stride" ::: Word32) -> io ()
cmdDrawMeshTasksIndirectCountNV :: forall io. MonadIO io => CommandBuffer -> Buffer -> ("offset" ::: DeviceSize) -> ("countBuffer" ::: Buffer) -> ("countBufferOffset" ::: DeviceSize) -> ("maxDrawCount" ::: Word32) -> ("stride" ::: Word32) -> io ()
data PhysicalDeviceMeshShaderFeaturesNV = PhysicalDeviceMeshShaderFeaturesNV {
- taskShader :: Bool
- meshShader :: Bool
}
data PhysicalDeviceMeshShaderPropertiesNV = PhysicalDeviceMeshShaderPropertiesNV {
- maxDrawMeshTasksCount :: Word32
- maxTaskWorkGroupInvocations :: Word32
- maxTaskWorkGroupSize :: (Word32, Word32, Word32)
- maxTaskTotalMemorySize :: Word32
- maxTaskOutputCount :: Word32
- maxMeshWorkGroupInvocations :: Word32
- maxMeshWorkGroupSize :: (Word32, Word32, Word32)
- maxMeshTotalMemorySize :: Word32
- maxMeshOutputVertices :: Word32
- maxMeshOutputPrimitives :: Word32
- maxMeshMultiviewViewCount :: Word32
- meshOutputPerVertexGranularity :: Word32
- meshOutputPerPrimitiveGranularity :: Word32
}
data DrawMeshTasksIndirectCommandNV = DrawMeshTasksIndirectCommandNV {
- taskCount :: Word32
- firstTask :: Word32
}
type NV_MESH_SHADER_SPEC_VERSION = 1
pattern NV_MESH_SHADER_SPEC_VERSION :: forall a. Integral a => a
type NV_MESH_SHADER_EXTENSION_NAME = "VK_NV_mesh_shader"
pattern NV_MESH_SHADER_EXTENSION_NAME :: forall a. (Eq a, IsString a) => a

Documentation

cmdDrawMeshTasksNV Source #

Arguments

:: forall io. MonadIO io
=> CommandBuffer	`commandBuffer` is the command buffer into which the command will be recorded.
-> ("taskCount" ::: Word32)	`taskCount` is the number of local workgroups to dispatch in the X dimension. Y and Z dimension are implicitly set to one.
-> ("firstTask" ::: Word32)	`firstTask` is the X component of the first workgroup ID.
-> io ()

vkCmdDrawMeshTasksNV - Draw mesh task work items

Description

When the command is executed, a global workgroup consisting of taskCount local workgroups is assembled.

Valid Usage

If a ImageView is sampled with FILTER_LINEAR as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
A valid pipeline must be bound to the pipeline bind point used by this command
If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
Every input attachment used by the current subpass must be bound to the pipeline via a descriptor set
Image subresources used as attachments in the current render pass must not be accessed in any way other than as an attachment by this command
If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
taskCount must be less than or equal to PhysicalDeviceMeshShaderPropertiesNV::maxDrawMeshTasksCount

Valid Usage (Implicit)

commandBuffer must be a valid CommandBuffer handle

commandBuffer must be in the recording state
The CommandPool that commandBuffer was allocated from must support graphics operations
This command must only be called inside of a render pass instance

Host Synchronization

Host access to commandBuffer must be externally synchronized

Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types	Pipeline Type
Primary Secondary	Inside	Graphics	Graphics

Description

cmdDrawMeshTasksIndirectNV behaves similarly to cmdDrawMeshTasksNV except that the parameters are read by the device from a buffer during execution. drawCount draws are executed by the command, with parameters taken from buffer starting at offset and increasing by stride bytes for each successive draw. The parameters of each draw are encoded in an array of DrawMeshTasksIndirectCommandNV structures. If drawCount is less than or equal to one, stride is ignored.

Valid Usage

If a ImageView is sampled with FILTER_LINEAR as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
A valid pipeline must be bound to the pipeline bind point used by this command
If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
Every input attachment used by the current subpass must be bound to the pipeline via a descriptor set
Image subresources used as attachments in the current render pass must not be accessed in any way other than as an attachment by this command
If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
If buffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
buffer must have been created with the BUFFER_USAGE_INDIRECT_BUFFER_BIT bit set
offset must be a multiple of 4
commandBuffer must not be a protected command buffer
If the multi-draw indirect feature is not enabled, drawCount must be 0 or 1
drawCount must be less than or equal to PhysicalDeviceLimits::maxDrawIndirectCount
If drawCount is greater than 1, stride must be a multiple of 4 and must be greater than or equal to sizeof(DrawMeshTasksIndirectCommandNV)
If drawCount is equal to 1, (offset + sizeof(DrawMeshTasksIndirectCommandNV)) must be less than or equal to the size of buffer
If drawCount is greater than 1, (stride × (drawCount - 1) + offset + sizeof(DrawMeshTasksIndirectCommandNV)) must be less than or equal to the size of buffer

Valid Usage (Implicit)

commandBuffer must be a valid CommandBuffer handle

buffer must be a valid Buffer handle
commandBuffer must be in the recording state
The CommandPool that commandBuffer was allocated from must support graphics operations
This command must only be called inside of a render pass instance
Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

Host access to commandBuffer must be externally synchronized

Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types	Pipeline Type
Primary Secondary	Inside	Graphics	Graphics

Description

cmdDrawMeshTasksIndirectCountNV behaves similarly to cmdDrawMeshTasksIndirectNV except that the draw count is read by the device from a buffer during execution. The command will read an unsigned 32-bit integer from countBuffer located at countBufferOffset and use this as the draw count.

Valid Usage

If a ImageView is sampled with FILTER_LINEAR as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_LINEAR_BIT

If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
A valid pipeline must be bound to the pipeline bind point used by this command
If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
Every input attachment used by the current subpass must be bound to the pipeline via a descriptor set
Image subresources used as attachments in the current render pass must not be accessed in any way other than as an attachment by this command
If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
If buffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
buffer must have been created with the BUFFER_USAGE_INDIRECT_BUFFER_BIT bit set
offset must be a multiple of 4
commandBuffer must not be a protected command buffer
If countBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
countBuffer must have been created with the BUFFER_USAGE_INDIRECT_BUFFER_BIT bit set
countBufferOffset must be a multiple of 4
The count stored in countBuffer must be less than or equal to PhysicalDeviceLimits::maxDrawIndirectCount
stride must be a multiple of 4 and must be greater than or equal to sizeof(DrawMeshTasksIndirectCommandNV)
If maxDrawCount is greater than or equal to 1, (stride × (maxDrawCount - 1) + offset + sizeof(DrawMeshTasksIndirectCommandNV)) must be less than or equal to the size of buffer
If the count stored in countBuffer is equal to 1, (offset + sizeof(DrawMeshTasksIndirectCommandNV)) must be less than or equal to the size of buffer
If the count stored in countBuffer is greater than 1, (stride × (drawCount - 1) + offset + sizeof(DrawMeshTasksIndirectCommandNV)) must be less than or equal to the size of buffer

Valid Usage (Implicit)

commandBuffer must be a valid CommandBuffer handle

buffer must be a valid Buffer handle
countBuffer must be a valid Buffer handle
commandBuffer must be in the recording state
The CommandPool that commandBuffer was allocated from must support graphics operations
This command must only be called inside of a render pass instance
Each of buffer, commandBuffer, and countBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

Host access to commandBuffer must be externally synchronized

Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels	Render Pass Scope	Supported Queue Types	Pipeline Type
Primary Secondary	Inside	Graphics	Graphics

Description

If the PhysicalDeviceMeshShaderFeaturesNV structure is included in the pNext chain of PhysicalDeviceFeatures2, it is filled with a value indicating whether the feature is supported. PhysicalDeviceMeshShaderFeaturesNV can also be included in pNext chain of DeviceCreateInfo to enable the features.

Valid Usage (Implicit)

Members

The members of the PhysicalDeviceMeshShaderPropertiesNV structure describe the following implementation-dependent limits:

Description

If the PhysicalDeviceMeshShaderPropertiesNV structure is included in the pNext chain of PhysicalDeviceProperties2, it is filled with the implementation-dependent limits.

Valid Usage (Implicit)

Description

The members of DrawMeshTasksIndirectCommandNV have the same meaning as the similarly named parameters of cmdDrawMeshTasksNV.

Eq PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods (==) :: PhysicalDeviceMeshShaderFeaturesNV -> PhysicalDeviceMeshShaderFeaturesNV -> Bool # (/=) :: PhysicalDeviceMeshShaderFeaturesNV -> PhysicalDeviceMeshShaderFeaturesNV -> Bool #
Show PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods showsPrec :: Int -> PhysicalDeviceMeshShaderFeaturesNV -> ShowS # show :: PhysicalDeviceMeshShaderFeaturesNV -> String # showList :: [PhysicalDeviceMeshShaderFeaturesNV] -> ShowS #
Generic PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Associated Types type Rep PhysicalDeviceMeshShaderFeaturesNV :: Type -> Type # Methods from :: PhysicalDeviceMeshShaderFeaturesNV -> Rep PhysicalDeviceMeshShaderFeaturesNV x # to :: Rep PhysicalDeviceMeshShaderFeaturesNV x -> PhysicalDeviceMeshShaderFeaturesNV #
Storable PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods sizeOf :: PhysicalDeviceMeshShaderFeaturesNV -> Int # alignment :: PhysicalDeviceMeshShaderFeaturesNV -> Int # peekElemOff :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> Int -> IO PhysicalDeviceMeshShaderFeaturesNV # pokeElemOff :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> Int -> PhysicalDeviceMeshShaderFeaturesNV -> IO () # peekByteOff :: Ptr b -> Int -> IO PhysicalDeviceMeshShaderFeaturesNV # pokeByteOff :: Ptr b -> Int -> PhysicalDeviceMeshShaderFeaturesNV -> IO () # peek :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> IO PhysicalDeviceMeshShaderFeaturesNV # poke :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> PhysicalDeviceMeshShaderFeaturesNV -> IO () #
FromCStruct PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods peekCStruct :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> IO PhysicalDeviceMeshShaderFeaturesNV Source #
ToCStruct PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods withCStruct :: PhysicalDeviceMeshShaderFeaturesNV -> (Ptr PhysicalDeviceMeshShaderFeaturesNV -> IO b) -> IO b Source # pokeCStruct :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> PhysicalDeviceMeshShaderFeaturesNV -> IO b -> IO b Source # withZeroCStruct :: (Ptr PhysicalDeviceMeshShaderFeaturesNV -> IO b) -> IO b Source # pokeZeroCStruct :: Ptr PhysicalDeviceMeshShaderFeaturesNV -> IO b -> IO b Source # cStructSize :: Int Source # cStructAlignment :: Int Source #
Zero PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods zero :: PhysicalDeviceMeshShaderFeaturesNV Source #
type Rep PhysicalDeviceMeshShaderFeaturesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader type Rep PhysicalDeviceMeshShaderFeaturesNV = D1 ('MetaData "PhysicalDeviceMeshShaderFeaturesNV" "Vulkan.Extensions.VK_NV_mesh_shader" "vulkan-3.3.1-inplace" 'False) (C1 ('MetaCons "PhysicalDeviceMeshShaderFeaturesNV" 'PrefixI 'True) (S1 ('MetaSel ('Just "taskShader") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Bool) :*: S1 ('MetaSel ('Just "meshShader") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Bool)))

Eq PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods (==) :: PhysicalDeviceMeshShaderPropertiesNV -> PhysicalDeviceMeshShaderPropertiesNV -> Bool # (/=) :: PhysicalDeviceMeshShaderPropertiesNV -> PhysicalDeviceMeshShaderPropertiesNV -> Bool #
Show PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods showsPrec :: Int -> PhysicalDeviceMeshShaderPropertiesNV -> ShowS # show :: PhysicalDeviceMeshShaderPropertiesNV -> String # showList :: [PhysicalDeviceMeshShaderPropertiesNV] -> ShowS #
Generic PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Associated Types type Rep PhysicalDeviceMeshShaderPropertiesNV :: Type -> Type # Methods from :: PhysicalDeviceMeshShaderPropertiesNV -> Rep PhysicalDeviceMeshShaderPropertiesNV x # to :: Rep PhysicalDeviceMeshShaderPropertiesNV x -> PhysicalDeviceMeshShaderPropertiesNV #
Storable PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods sizeOf :: PhysicalDeviceMeshShaderPropertiesNV -> Int # alignment :: PhysicalDeviceMeshShaderPropertiesNV -> Int # peekElemOff :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> Int -> IO PhysicalDeviceMeshShaderPropertiesNV # pokeElemOff :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> Int -> PhysicalDeviceMeshShaderPropertiesNV -> IO () # peekByteOff :: Ptr b -> Int -> IO PhysicalDeviceMeshShaderPropertiesNV # pokeByteOff :: Ptr b -> Int -> PhysicalDeviceMeshShaderPropertiesNV -> IO () # peek :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> IO PhysicalDeviceMeshShaderPropertiesNV # poke :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> PhysicalDeviceMeshShaderPropertiesNV -> IO () #
FromCStruct PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods peekCStruct :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> IO PhysicalDeviceMeshShaderPropertiesNV Source #
ToCStruct PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods withCStruct :: PhysicalDeviceMeshShaderPropertiesNV -> (Ptr PhysicalDeviceMeshShaderPropertiesNV -> IO b) -> IO b Source # pokeCStruct :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> PhysicalDeviceMeshShaderPropertiesNV -> IO b -> IO b Source # withZeroCStruct :: (Ptr PhysicalDeviceMeshShaderPropertiesNV -> IO b) -> IO b Source # pokeZeroCStruct :: Ptr PhysicalDeviceMeshShaderPropertiesNV -> IO b -> IO b Source # cStructSize :: Int Source # cStructAlignment :: Int Source #
Zero PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods zero :: PhysicalDeviceMeshShaderPropertiesNV Source #
type Rep PhysicalDeviceMeshShaderPropertiesNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader type Rep PhysicalDeviceMeshShaderPropertiesNV = D1 ('MetaData "PhysicalDeviceMeshShaderPropertiesNV" "Vulkan.Extensions.VK_NV_mesh_shader" "vulkan-3.3.1-inplace" 'False) (C1 ('MetaCons "PhysicalDeviceMeshShaderPropertiesNV" 'PrefixI 'True) (((S1 ('MetaSel ('Just "maxDrawMeshTasksCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: (S1 ('MetaSel ('Just "maxTaskWorkGroupInvocations") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: S1 ('MetaSel ('Just "maxTaskWorkGroupSize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Word32, Word32, Word32)))) :: (S1 ('MetaSel ('Just "maxTaskTotalMemorySize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: (S1 ('MetaSel ('Just "maxTaskOutputCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: S1 ('MetaSel ('Just "maxMeshWorkGroupInvocations") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32)))) :: ((S1 ('MetaSel ('Just "maxMeshWorkGroupSize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Word32, Word32, Word32)) :: (S1 ('MetaSel ('Just "maxMeshTotalMemorySize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: S1 ('MetaSel ('Just "maxMeshOutputVertices") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32))) :: ((S1 ('MetaSel ('Just "maxMeshOutputPrimitives") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: S1 ('MetaSel ('Just "maxMeshMultiviewViewCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32)) :: (S1 ('MetaSel ('Just "meshOutputPerVertexGranularity") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :: S1 ('MetaSel ('Just "meshOutputPerPrimitiveGranularity") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32))))))

Eq DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods (==) :: DrawMeshTasksIndirectCommandNV -> DrawMeshTasksIndirectCommandNV -> Bool # (/=) :: DrawMeshTasksIndirectCommandNV -> DrawMeshTasksIndirectCommandNV -> Bool #
Show DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods showsPrec :: Int -> DrawMeshTasksIndirectCommandNV -> ShowS # show :: DrawMeshTasksIndirectCommandNV -> String # showList :: [DrawMeshTasksIndirectCommandNV] -> ShowS #
Generic DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Associated Types type Rep DrawMeshTasksIndirectCommandNV :: Type -> Type # Methods from :: DrawMeshTasksIndirectCommandNV -> Rep DrawMeshTasksIndirectCommandNV x # to :: Rep DrawMeshTasksIndirectCommandNV x -> DrawMeshTasksIndirectCommandNV #
Storable DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods sizeOf :: DrawMeshTasksIndirectCommandNV -> Int # alignment :: DrawMeshTasksIndirectCommandNV -> Int # peekElemOff :: Ptr DrawMeshTasksIndirectCommandNV -> Int -> IO DrawMeshTasksIndirectCommandNV # pokeElemOff :: Ptr DrawMeshTasksIndirectCommandNV -> Int -> DrawMeshTasksIndirectCommandNV -> IO () # peekByteOff :: Ptr b -> Int -> IO DrawMeshTasksIndirectCommandNV # pokeByteOff :: Ptr b -> Int -> DrawMeshTasksIndirectCommandNV -> IO () # peek :: Ptr DrawMeshTasksIndirectCommandNV -> IO DrawMeshTasksIndirectCommandNV # poke :: Ptr DrawMeshTasksIndirectCommandNV -> DrawMeshTasksIndirectCommandNV -> IO () #
FromCStruct DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods peekCStruct :: Ptr DrawMeshTasksIndirectCommandNV -> IO DrawMeshTasksIndirectCommandNV Source #
ToCStruct DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods withCStruct :: DrawMeshTasksIndirectCommandNV -> (Ptr DrawMeshTasksIndirectCommandNV -> IO b) -> IO b Source # pokeCStruct :: Ptr DrawMeshTasksIndirectCommandNV -> DrawMeshTasksIndirectCommandNV -> IO b -> IO b Source # withZeroCStruct :: (Ptr DrawMeshTasksIndirectCommandNV -> IO b) -> IO b Source # pokeZeroCStruct :: Ptr DrawMeshTasksIndirectCommandNV -> IO b -> IO b Source # cStructSize :: Int Source # cStructAlignment :: Int Source #
Zero DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader Methods zero :: DrawMeshTasksIndirectCommandNV Source #
type Rep DrawMeshTasksIndirectCommandNV Source #
Instance details Defined in Vulkan.Extensions.VK_NV_mesh_shader type Rep DrawMeshTasksIndirectCommandNV = D1 ('MetaData "DrawMeshTasksIndirectCommandNV" "Vulkan.Extensions.VK_NV_mesh_shader" "vulkan-3.3.1-inplace" 'False) (C1 ('MetaCons "DrawMeshTasksIndirectCommandNV" 'PrefixI 'True) (S1 ('MetaSel ('Just "taskCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :*: S1 ('MetaSel ('Just "firstTask") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32)))

Documentation

Description

Valid Usage

Valid Usage (Implicit)

Host Synchronization

Command Properties

See Also

Description

Valid Usage

Valid Usage (Implicit)

Host Synchronization

Command Properties

See Also

Description

Valid Usage

Valid Usage (Implicit)

Host Synchronization

Command Properties

See Also

Description

Valid Usage (Implicit)

See Also

Instances

Members

Description

Valid Usage (Implicit)

See Also

Instances

Description

Valid Usage

See Also

Instances

PhysicalDeviceMeshShaderFeaturesNV
Fields taskShader :: Bool `taskShader` indicates whether the task shader stage is supported. meshShader :: Bool `meshShader` indicates whether the mesh shader stage is supported.

DrawMeshTasksIndirectCommandNV
Fields taskCount :: Word32 `taskCount` is the number of local workgroups to dispatch in the X dimension. Y and Z dimension are implicitly set to one. `taskCount` must be less than or equal to `PhysicalDeviceMeshShaderPropertiesNV`::`maxDrawMeshTasksCount` firstTask :: Word32 `firstTask` is the X component of the first workgroup ID.