{-# LANGUAGE CPP #-}
{-# LANGUAGE TypeFamilies #-}
{-# LANGUAGE DeriveDataTypeable #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE DataKinds #-}
{-# LANGUAGE DeriveFunctor #-}
{-# LANGUAGE RankNTypes #-}
{-# LANGUAGE ScopedTypeVariables #-}
-- | The simplest way to get started with this API is to turn on
-- @OverloadedStrings@ and call 'runProcess'.  The following will
-- write the contents of @/home@ to @stdout@ and then print the exit
-- code (on a UNIX system).
--
-- @
-- {-\# LANGUAGE OverloadedStrings \#-}
--
-- 'runProcess' "ls -l /home" >>= print
-- @
--
-- Please see the [README.md](https://github.com/fpco/typed-process#readme)
-- file for more examples of using this API.
module System.Process.Typed
    ( -- * Types
      ProcessConfig
    , StreamSpec
    , StreamType (..)
    , Process

      -- * ProcessConfig
      -- ** Smart constructors
    , proc
    , shell

      -- | #processconfigsetters#

      -- ** Setters
    , setStdin
    , setStdout
    , setStderr
    , setWorkingDir
    , setWorkingDirInherit
    , setEnv
    , setEnvInherit
    , setCloseFds
    , setCreateGroup
    , setDelegateCtlc
#if MIN_VERSION_process(1, 3, 0)
    , setDetachConsole
    , setCreateNewConsole
    , setNewSession
#endif
#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
    , setChildGroup
    , setChildGroupInherit
    , setChildUser
    , setChildUserInherit
#endif

      -- | #streamspecs#

      -- * Stream specs
      -- ** Built-in stream specs
    , inherit
    , nullStream
    , closed
    , byteStringInput
    , byteStringOutput
    , createPipe
    , useHandleOpen
    , useHandleClose

    -- ** Create your own stream spec
    , mkStreamSpec

      -- | #launchaprocess#

      -- * Launch a process
    , runProcess
    , readProcess
    , readProcessStdout
    , readProcessStderr
    , readProcessInterleaved
    , withProcessWait
    , withProcessTerm
    , startProcess
    , stopProcess
      -- ** Exception-throwing functions
      -- | The functions ending in underbar (@_@) are the same as
      -- their counterparts without underbar but instead of returning
      -- an 'ExitCode' they throw 'ExitCodeException' on failure.
    , runProcess_
    , readProcess_
    , readProcessStdout_
    , readProcessStderr_
    , readProcessInterleaved_
    , withProcessWait_
    , withProcessTerm_

      -- | #interactwithaprocess#

      -- * Interact with a process

      -- ** Process exit code
    , waitExitCode
    , waitExitCodeSTM
    , getExitCode
    , getExitCodeSTM
    , checkExitCode
    , checkExitCodeSTM

      -- ** Process streams
    , getStdin
    , getStdout
    , getStderr

      -- * Exceptions
    , ExitCodeException (..)
    , ByteStringOutputException (..)
      -- * Unsafe functions
    , unsafeProcessHandle
      -- * Deprecated functions
    , withProcess
    , withProcess_
    ) where

import qualified Data.ByteString as S
import Data.ByteString.Lazy.Internal (defaultChunkSize)
import qualified Control.Exception as E
import Control.Exception hiding (bracket, finally)
import Control.Monad (void)
import Control.Monad.IO.Class
import qualified System.Process as P
import Data.Typeable (Typeable)
import System.IO (Handle, hClose, IOMode(ReadWriteMode), withBinaryFile)
import System.IO.Error (isPermissionError)
import Control.Concurrent (threadDelay)
import Control.Concurrent.Async (async, asyncWithUnmask, cancel, waitCatch)
import Control.Concurrent.STM (newEmptyTMVarIO, atomically, putTMVar, TMVar, readTMVar, tryReadTMVar, STM, tryPutTMVar, throwSTM, catchSTM)
import System.Exit (ExitCode (ExitSuccess))
import System.Process.Typed.Internal
import qualified Data.ByteString.Lazy as L
import qualified Data.ByteString.Lazy.Char8 as L8
import Data.String (IsString (fromString))
import GHC.RTS.Flags (getConcFlags, ctxtSwitchTime)
import Control.Monad.IO.Unlift

#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
import System.Posix.Types (GroupID, UserID)
#endif

#if !MIN_VERSION_base(4, 8, 0)
import Control.Applicative (Applicative (..), (<$>), (<$))
#endif

#if !MIN_VERSION_process(1, 3, 0)
import qualified System.Process.Internals as P (createProcess_)
#endif

-- | An abstract configuration for a process, which can then be
-- launched into an actual running 'Process'. Takes three type
-- parameters, providing the types of standard input, standard output,
-- and standard error, respectively.
--
-- There are three ways to construct a value of this type:
--
-- * With the 'proc' smart constructor, which takes a command name and
-- a list of arguments.
--
-- * With the 'shell' smart constructor, which takes a shell string
--
-- * With the 'IsString' instance via OverloadedStrings. If you
-- provide it a string with no spaces (e.g., @"date"@), it will
-- treat it as a raw command with no arguments (e.g., @proc "date"
-- []@). If it has spaces, it will use @shell@.
--
-- In all cases, the default for all three streams is to inherit the
-- streams from the parent process. For other settings, see the
-- [setters below](#processconfigsetters) for default values.
--
-- Once you have a @ProcessConfig@ you can launch a process from it
-- using the functions in the section [Launch a
-- process](#launchaprocess).
--
-- @since 0.1.0.0
data ProcessConfig stdin stdout stderr = ProcessConfig
    { ProcessConfig stdin stdout stderr -> CmdSpec
pcCmdSpec :: !P.CmdSpec
    , ProcessConfig stdin stdout stderr -> StreamSpec 'STInput stdin
pcStdin :: !(StreamSpec 'STInput stdin)
    , ProcessConfig stdin stdout stderr -> StreamSpec 'STOutput stdout
pcStdout :: !(StreamSpec 'STOutput stdout)
    , ProcessConfig stdin stdout stderr -> StreamSpec 'STOutput stderr
pcStderr :: !(StreamSpec 'STOutput stderr)
    , ProcessConfig stdin stdout stderr -> Maybe FilePath
pcWorkingDir :: !(Maybe FilePath)
    , ProcessConfig stdin stdout stderr -> Maybe [(FilePath, FilePath)]
pcEnv :: !(Maybe [(String, String)])
    , ProcessConfig stdin stdout stderr -> Bool
pcCloseFds :: !Bool
    , ProcessConfig stdin stdout stderr -> Bool
pcCreateGroup :: !Bool
    , ProcessConfig stdin stdout stderr -> Bool
pcDelegateCtlc :: !Bool

#if MIN_VERSION_process(1, 3, 0)
    , ProcessConfig stdin stdout stderr -> Bool
pcDetachConsole :: !Bool
    , ProcessConfig stdin stdout stderr -> Bool
pcCreateNewConsole :: !Bool
    , ProcessConfig stdin stdout stderr -> Bool
pcNewSession :: !Bool
#endif

#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
    , ProcessConfig stdin stdout stderr -> Maybe GroupID
pcChildGroup :: !(Maybe GroupID)
    , ProcessConfig stdin stdout stderr -> Maybe UserID
pcChildUser :: !(Maybe UserID)
#endif
    }
instance Show (ProcessConfig stdin stdout stderr) where
    show :: ProcessConfig stdin stdout stderr -> FilePath
show ProcessConfig stdin stdout stderr
pc = [FilePath] -> FilePath
forall (t :: * -> *) a. Foldable t => t [a] -> [a]
concat
        [ case ProcessConfig stdin stdout stderr -> CmdSpec
forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> CmdSpec
pcCmdSpec ProcessConfig stdin stdout stderr
pc of
            P.ShellCommand FilePath
s -> FilePath
"Shell command: " FilePath -> ShowS
forall a. [a] -> [a] -> [a]
++ FilePath
s
            P.RawCommand FilePath
x [FilePath]
xs -> FilePath
"Raw command: " FilePath -> ShowS
forall a. [a] -> [a] -> [a]
++ [FilePath] -> FilePath
unwords (ShowS -> [FilePath] -> [FilePath]
forall a b. (a -> b) -> [a] -> [b]
map ShowS
escape (FilePath
xFilePath -> [FilePath] -> [FilePath]
forall a. a -> [a] -> [a]
:[FilePath]
xs))
        , FilePath
"\n"
        , case ProcessConfig stdin stdout stderr -> Maybe FilePath
forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe FilePath
pcWorkingDir ProcessConfig stdin stdout stderr
pc of
            Maybe FilePath
Nothing -> FilePath
""
            Just FilePath
wd -> [FilePath] -> FilePath
forall (t :: * -> *) a. Foldable t => t [a] -> [a]
concat
                [ FilePath
"Run from: "
                , FilePath
wd
                , FilePath
"\n"
                ]
        , case ProcessConfig stdin stdout stderr -> Maybe [(FilePath, FilePath)]
forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe [(FilePath, FilePath)]
pcEnv ProcessConfig stdin stdout stderr
pc of
            Maybe [(FilePath, FilePath)]
Nothing -> FilePath
""
            Just [(FilePath, FilePath)]
e -> [FilePath] -> FilePath
unlines
                ([FilePath] -> FilePath) -> [FilePath] -> FilePath
forall a b. (a -> b) -> a -> b
$ FilePath
"Modified environment:"
                FilePath -> [FilePath] -> [FilePath]
forall a. a -> [a] -> [a]
: ((FilePath, FilePath) -> FilePath)
-> [(FilePath, FilePath)] -> [FilePath]
forall a b. (a -> b) -> [a] -> [b]
map (\(FilePath
k, FilePath
v) -> [FilePath] -> FilePath
forall (t :: * -> *) a. Foldable t => t [a] -> [a]
concat [FilePath
k, FilePath
"=", FilePath
v]) [(FilePath, FilePath)]
e
        ]
      where
        escape :: ShowS
escape FilePath
x
            | (Char -> Bool) -> FilePath -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
any (Char -> FilePath -> Bool
forall (t :: * -> *) a. (Foldable t, Eq a) => a -> t a -> Bool
`elem` FilePath
" \\\"'") FilePath
x = ShowS
forall a. Show a => a -> FilePath
show FilePath
x
            | FilePath
x FilePath -> FilePath -> Bool
forall a. Eq a => a -> a -> Bool
== FilePath
"" = FilePath
"\"\""
            | Bool
otherwise = FilePath
x
instance (stdin ~ (), stdout ~ (), stderr ~ ())
  => IsString (ProcessConfig stdin stdout stderr) where
    fromString :: FilePath -> ProcessConfig stdin stdout stderr
fromString FilePath
s
        | (Char -> Bool) -> FilePath -> Bool
forall (t :: * -> *) a. Foldable t => (a -> Bool) -> t a -> Bool
any (Char -> Char -> Bool
forall a. Eq a => a -> a -> Bool
== Char
' ') FilePath
s = FilePath -> ProcessConfig () () ()
shell FilePath
s
        | Bool
otherwise = FilePath -> [FilePath] -> ProcessConfig () () ()
proc FilePath
s []

-- | Whether a stream is an input stream or output stream. Note that
-- this is from the perspective of the /child process/, so that a
-- child's standard input stream is an @STInput@, even though the
-- parent process will be writing to it.
--
-- @since 0.1.0.0
data StreamType = STInput | STOutput

-- | A specification for how to create one of the three standard child
-- streams, @stdin@, @stdout@ and @stderr@. A 'StreamSpec' can be
-- thought of as containing
--
-- 1. A type safe version of 'P.StdStream' from "System.Process".
-- This determines whether the stream should be inherited from the
-- parent process, piped to or from a 'Handle', etc.
--
-- 2. A means of accessing the stream as a value of type @a@
--
-- 3. A cleanup action which will be run on the stream once the
-- process terminates
--
-- To create a @StreamSpec@ see the section [Stream
-- specs](#streamspecs).
--
-- @since 0.1.0.0
data StreamSpec (streamType :: StreamType) a = StreamSpec
    { StreamSpec streamType a -> forall b. (StdStream -> IO b) -> IO b
ssStream :: !(forall b. (P.StdStream -> IO b) -> IO b)
    , StreamSpec streamType a
-> ProcessConfig () () () -> Maybe Handle -> Cleanup a
ssCreate :: !(ProcessConfig () () () -> Maybe Handle -> Cleanup a)
    }
    deriving a -> StreamSpec streamType b -> StreamSpec streamType a
(a -> b) -> StreamSpec streamType a -> StreamSpec streamType b
(forall a b.
 (a -> b) -> StreamSpec streamType a -> StreamSpec streamType b)
-> (forall a b.
    a -> StreamSpec streamType b -> StreamSpec streamType a)
-> Functor (StreamSpec streamType)
forall a b. a -> StreamSpec streamType b -> StreamSpec streamType a
forall a b.
(a -> b) -> StreamSpec streamType a -> StreamSpec streamType b
forall (streamType :: StreamType) a b.
a -> StreamSpec streamType b -> StreamSpec streamType a
forall (streamType :: StreamType) a b.
(a -> b) -> StreamSpec streamType a -> StreamSpec streamType b
forall (f :: * -> *).
(forall a b. (a -> b) -> f a -> f b)
-> (forall a b. a -> f b -> f a) -> Functor f
<$ :: a -> StreamSpec streamType b -> StreamSpec streamType a
$c<$ :: forall (streamType :: StreamType) a b.
a -> StreamSpec streamType b -> StreamSpec streamType a
fmap :: (a -> b) -> StreamSpec streamType a -> StreamSpec streamType b
$cfmap :: forall (streamType :: StreamType) a b.
(a -> b) -> StreamSpec streamType a -> StreamSpec streamType b
Functor

-- | This instance uses 'byteStringInput' to convert a raw string into
-- a stream of input for a child process.
--
-- @since 0.1.0.0
instance (streamType ~ 'STInput, res ~ ())
  => IsString (StreamSpec streamType res) where
    fromString :: FilePath -> StreamSpec streamType res
fromString = ByteString -> StreamSpec 'STInput ()
byteStringInput (ByteString -> StreamSpec 'STInput ())
-> (FilePath -> ByteString) -> FilePath -> StreamSpec 'STInput ()
forall b c a. (b -> c) -> (a -> b) -> a -> c
. FilePath -> ByteString
forall a. IsString a => FilePath -> a
fromString

-- | Internal type, to make for easier composition of cleanup actions.
--
-- @since 0.1.0.0
newtype Cleanup a = Cleanup { Cleanup a -> IO (a, IO ())
runCleanup :: IO (a, IO ()) }
    deriving a -> Cleanup b -> Cleanup a
(a -> b) -> Cleanup a -> Cleanup b
(forall a b. (a -> b) -> Cleanup a -> Cleanup b)
-> (forall a b. a -> Cleanup b -> Cleanup a) -> Functor Cleanup
forall a b. a -> Cleanup b -> Cleanup a
forall a b. (a -> b) -> Cleanup a -> Cleanup b
forall (f :: * -> *).
(forall a b. (a -> b) -> f a -> f b)
-> (forall a b. a -> f b -> f a) -> Functor f
<$ :: a -> Cleanup b -> Cleanup a
$c<$ :: forall a b. a -> Cleanup b -> Cleanup a
fmap :: (a -> b) -> Cleanup a -> Cleanup b
$cfmap :: forall a b. (a -> b) -> Cleanup a -> Cleanup b
Functor
instance Applicative Cleanup where
    pure :: a -> Cleanup a
pure a
x = IO (a, IO ()) -> Cleanup a
forall a. IO (a, IO ()) -> Cleanup a
Cleanup ((a, IO ()) -> IO (a, IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return (a
x, () -> IO ()
forall (m :: * -> *) a. Monad m => a -> m a
return ()))
    Cleanup IO (a -> b, IO ())
f <*> :: Cleanup (a -> b) -> Cleanup a -> Cleanup b
<*> Cleanup IO (a, IO ())
x = IO (b, IO ()) -> Cleanup b
forall a. IO (a, IO ()) -> Cleanup a
Cleanup (IO (b, IO ()) -> Cleanup b) -> IO (b, IO ()) -> Cleanup b
forall a b. (a -> b) -> a -> b
$ do
        (a -> b
f', IO ()
c1) <- IO (a -> b, IO ())
f
        (IO (b, IO ()) -> IO () -> IO (b, IO ())
forall a b. IO a -> IO b -> IO a
`onException` IO ()
c1) (IO (b, IO ()) -> IO (b, IO ())) -> IO (b, IO ()) -> IO (b, IO ())
forall a b. (a -> b) -> a -> b
$ do
            (a
x', IO ()
c2) <- IO (a, IO ())
x
            (b, IO ()) -> IO (b, IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return (a -> b
f' a
x', IO ()
c1 IO () -> IO () -> IO ()
forall (m :: * -> *) a. MonadUnliftIO m => m a -> IO () -> m a
`finally` IO ()
c2)

-- | A running process. The three type parameters provide the type of
-- the standard input, standard output, and standard error streams.
--
-- To interact with a @Process@ use the functions from the section
-- [Interact with a process](#interactwithaprocess).
--
-- @since 0.1.0.0
data Process stdin stdout stderr = Process
    { Process stdin stdout stderr -> ProcessConfig () () ()
pConfig :: !(ProcessConfig () () ())
    , Process stdin stdout stderr -> IO ()
pCleanup :: !(IO ())
    , Process stdin stdout stderr -> stdin
pStdin :: !stdin
    , Process stdin stdout stderr -> stdout
pStdout :: !stdout
    , Process stdin stdout stderr -> stderr
pStderr :: !stderr
    , Process stdin stdout stderr -> ProcessHandle
pHandle :: !P.ProcessHandle
    , Process stdin stdout stderr -> TMVar ExitCode
pExitCode :: !(TMVar ExitCode)
    }
instance Show (Process stdin stdout stderr) where
    show :: Process stdin stdout stderr -> FilePath
show Process stdin stdout stderr
p = FilePath
"Running process: " FilePath -> ShowS
forall a. [a] -> [a] -> [a]
++ ProcessConfig () () () -> FilePath
forall a. Show a => a -> FilePath
show (Process stdin stdout stderr -> ProcessConfig () () ()
forall stdin stdout stderr.
Process stdin stdout stderr -> ProcessConfig () () ()
pConfig Process stdin stdout stderr
p)

-- | Internal helper
defaultProcessConfig :: ProcessConfig () () ()
defaultProcessConfig :: ProcessConfig () () ()
defaultProcessConfig = ProcessConfig :: forall stdin stdout stderr.
CmdSpec
-> StreamSpec 'STInput stdin
-> StreamSpec 'STOutput stdout
-> StreamSpec 'STOutput stderr
-> Maybe FilePath
-> Maybe [(FilePath, FilePath)]
-> Bool
-> Bool
-> Bool
-> Bool
-> Bool
-> Bool
-> Maybe GroupID
-> Maybe UserID
-> ProcessConfig stdin stdout stderr
ProcessConfig
    { pcCmdSpec :: CmdSpec
pcCmdSpec = FilePath -> CmdSpec
P.ShellCommand FilePath
""
    , pcStdin :: StreamSpec 'STInput ()
pcStdin = StreamSpec 'STInput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    , pcStdout :: StreamSpec 'STOutput ()
pcStdout = StreamSpec 'STOutput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    , pcStderr :: StreamSpec 'STOutput ()
pcStderr = StreamSpec 'STOutput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    , pcWorkingDir :: Maybe FilePath
pcWorkingDir = Maybe FilePath
forall a. Maybe a
Nothing
    , pcEnv :: Maybe [(FilePath, FilePath)]
pcEnv = Maybe [(FilePath, FilePath)]
forall a. Maybe a
Nothing
    , pcCloseFds :: Bool
pcCloseFds = Bool
False
    , pcCreateGroup :: Bool
pcCreateGroup = Bool
False
    , pcDelegateCtlc :: Bool
pcDelegateCtlc = Bool
False

#if MIN_VERSION_process(1, 3, 0)
    , pcDetachConsole :: Bool
pcDetachConsole = Bool
False
    , pcCreateNewConsole :: Bool
pcCreateNewConsole = Bool
False
    , pcNewSession :: Bool
pcNewSession = Bool
False
#endif

#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
    , pcChildGroup :: Maybe GroupID
pcChildGroup = Maybe GroupID
forall a. Maybe a
Nothing
    , pcChildUser :: Maybe UserID
pcChildUser = Maybe UserID
forall a. Maybe a
Nothing
#endif
    }

-- | Create a 'ProcessConfig' from the given command and arguments.
--
-- @since 0.1.0.0
proc :: FilePath -> [String] -> ProcessConfig () () ()
proc :: FilePath -> [FilePath] -> ProcessConfig () () ()
proc FilePath
cmd [FilePath]
args = FilePath
-> [FilePath] -> ProcessConfig () () () -> ProcessConfig () () ()
forall stdin stdout stderr.
FilePath
-> [FilePath]
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setProc FilePath
cmd [FilePath]
args ProcessConfig () () ()
defaultProcessConfig

-- | Internal helper
setProc :: FilePath -> [String]
        -> ProcessConfig stdin stdout stderr
        -> ProcessConfig stdin stdout stderr
setProc :: FilePath
-> [FilePath]
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setProc FilePath
cmd [FilePath]
args ProcessConfig stdin stdout stderr
p = ProcessConfig stdin stdout stderr
p { pcCmdSpec :: CmdSpec
pcCmdSpec = FilePath -> [FilePath] -> CmdSpec
P.RawCommand FilePath
cmd [FilePath]
args }

-- | Create a 'ProcessConfig' from the given shell command.
--
-- @since 0.1.0.0
shell :: String -> ProcessConfig () () ()
shell :: FilePath -> ProcessConfig () () ()
shell FilePath
cmd = FilePath -> ProcessConfig () () () -> ProcessConfig () () ()
forall stdin stdout stderr.
FilePath
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setShell FilePath
cmd ProcessConfig () () ()
defaultProcessConfig

-- | Internal helper
setShell :: String
         -> ProcessConfig stdin stdout stderr
         -> ProcessConfig stdin stdout stderr
setShell :: FilePath
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setShell FilePath
cmd ProcessConfig stdin stdout stderr
p = ProcessConfig stdin stdout stderr
p { pcCmdSpec :: CmdSpec
pcCmdSpec = FilePath -> CmdSpec
P.ShellCommand FilePath
cmd }

-- | Set the child's standard input stream to the given 'StreamSpec'.
--
-- Default: 'inherit'
--
-- @since 0.1.0.0
setStdin :: StreamSpec 'STInput stdin
         -- ^
         -> ProcessConfig stdin0 stdout stderr
         -- ^
         -> ProcessConfig stdin stdout stderr
setStdin :: StreamSpec 'STInput stdin
-> ProcessConfig stdin0 stdout stderr
-> ProcessConfig stdin stdout stderr
setStdin StreamSpec 'STInput stdin
spec ProcessConfig stdin0 stdout stderr
pc = ProcessConfig stdin0 stdout stderr
pc { pcStdin :: StreamSpec 'STInput stdin
pcStdin = StreamSpec 'STInput stdin
spec }

-- | Set the child's standard output stream to the given 'StreamSpec'.
--
-- Default: 'inherit'
--
-- @since 0.1.0.0
setStdout :: StreamSpec 'STOutput stdout
          -- ^
          -> ProcessConfig stdin stdout0 stderr
          -- ^
          -> ProcessConfig stdin stdout stderr
setStdout :: StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout StreamSpec 'STOutput stdout
spec ProcessConfig stdin stdout0 stderr
pc = ProcessConfig stdin stdout0 stderr
pc { pcStdout :: StreamSpec 'STOutput stdout
pcStdout = StreamSpec 'STOutput stdout
spec }

-- | Set the child's standard error stream to the given 'StreamSpec'.
--
-- Default: 'inherit'
--
-- @since 0.1.0.0
setStderr :: StreamSpec 'STOutput stderr
          -- ^
          -> ProcessConfig stdin stdout stderr0
          -- ^
          -> ProcessConfig stdin stdout stderr
setStderr :: StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr StreamSpec 'STOutput stderr
spec ProcessConfig stdin stdout stderr0
pc = ProcessConfig stdin stdout stderr0
pc { pcStderr :: StreamSpec 'STOutput stderr
pcStderr = StreamSpec 'STOutput stderr
spec }

-- | Set the working directory of the child process.
--
-- Default: current process's working directory.
--
-- @since 0.1.0.0
setWorkingDir :: FilePath
              -- ^
              -> ProcessConfig stdin stdout stderr
              -- ^
              -> ProcessConfig stdin stdout stderr
setWorkingDir :: FilePath
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setWorkingDir FilePath
dir ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcWorkingDir :: Maybe FilePath
pcWorkingDir = FilePath -> Maybe FilePath
forall a. a -> Maybe a
Just FilePath
dir }

-- | Inherit the working directory from the parent process.
--
-- @since 0.2.2.0
setWorkingDirInherit
  :: ProcessConfig stdin stdout stderr
  -- ^
  -> ProcessConfig stdin stdout stderr
setWorkingDirInherit :: ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setWorkingDirInherit ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcWorkingDir :: Maybe FilePath
pcWorkingDir = Maybe FilePath
forall a. Maybe a
Nothing }

-- | Set the environment variables of the child process.
--
-- Default: current process's environment.
--
-- @since 0.1.0.0
setEnv :: [(String, String)]
       -- ^
       -> ProcessConfig stdin stdout stderr
       -- ^
       -> ProcessConfig stdin stdout stderr
setEnv :: [(FilePath, FilePath)]
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setEnv [(FilePath, FilePath)]
env ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcEnv :: Maybe [(FilePath, FilePath)]
pcEnv = [(FilePath, FilePath)] -> Maybe [(FilePath, FilePath)]
forall a. a -> Maybe a
Just [(FilePath, FilePath)]
env }

-- | Inherit the environment variables from the parent process.
--
-- @since 0.2.2.0
setEnvInherit
  :: ProcessConfig stdin stdout stderr
  -- ^
  -> ProcessConfig stdin stdout stderr
setEnvInherit :: ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setEnvInherit ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcEnv :: Maybe [(FilePath, FilePath)]
pcEnv = Maybe [(FilePath, FilePath)]
forall a. Maybe a
Nothing }

-- | Should we close all file descriptors besides stdin, stdout, and
-- stderr? See 'P.close_fds' for more information.
--
-- Default: False
--
-- @since 0.1.0.0
setCloseFds
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setCloseFds :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setCloseFds Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcCloseFds :: Bool
pcCloseFds = Bool
x }

-- | Should we create a new process group?
--
-- Default: False
--
-- @since 0.1.0.0
setCreateGroup
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setCreateGroup :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setCreateGroup Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcCreateGroup :: Bool
pcCreateGroup = Bool
x }

-- | Delegate handling of Ctrl-C to the child. For more information,
-- see 'P.delegate_ctlc'.
--
-- Default: False
--
-- @since 0.1.0.0
setDelegateCtlc
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setDelegateCtlc :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setDelegateCtlc Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcDelegateCtlc :: Bool
pcDelegateCtlc = Bool
x }

#if MIN_VERSION_process(1, 3, 0)

-- | Detach console on Windows, see 'P.detach_console'.
--
-- Default: False
--
-- @since 0.1.0.0
setDetachConsole
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setDetachConsole :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setDetachConsole Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcDetachConsole :: Bool
pcDetachConsole = Bool
x }

-- | Create new console on Windows, see 'P.create_new_console'.
--
-- Default: False
--
-- @since 0.1.0.0
setCreateNewConsole
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setCreateNewConsole :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setCreateNewConsole Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcCreateNewConsole :: Bool
pcCreateNewConsole = Bool
x }

-- | Set a new session with the POSIX @setsid@ syscall, does nothing
-- on non-POSIX. See 'P.new_session'.
--
-- Default: False
--
-- @since 0.1.0.0
setNewSession
    :: Bool
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setNewSession :: Bool
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setNewSession Bool
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcNewSession :: Bool
pcNewSession = Bool
x }
#endif

#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
-- | Set the child process's group ID with the POSIX @setgid@ syscall,
-- does nothing on non-POSIX. See 'P.child_group'.
--
-- Default: False
--
-- @since 0.1.0.0
setChildGroup
    :: GroupID
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setChildGroup :: GroupID
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setChildGroup GroupID
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcChildGroup :: Maybe GroupID
pcChildGroup = GroupID -> Maybe GroupID
forall a. a -> Maybe a
Just GroupID
x }

-- | Inherit the group from the parent process.
--
-- @since 0.2.2.0
setChildGroupInherit
  :: ProcessConfig stdin stdout stderr
  -- ^
  -> ProcessConfig stdin stdout stderr
setChildGroupInherit :: ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setChildGroupInherit ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcChildGroup :: Maybe GroupID
pcChildGroup = Maybe GroupID
forall a. Maybe a
Nothing }

-- | Set the child process's user ID with the POSIX @setuid@ syscall,
-- does nothing on non-POSIX. See 'P.child_user'.
--
-- Default: False
--
-- @since 0.1.0.0
setChildUser
    :: UserID
    -- ^
    -> ProcessConfig stdin stdout stderr
    -- ^
    -> ProcessConfig stdin stdout stderr
setChildUser :: UserID
-> ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setChildUser UserID
x ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcChildUser :: Maybe UserID
pcChildUser = UserID -> Maybe UserID
forall a. a -> Maybe a
Just UserID
x }

-- | Inherit the user from the parent process.
--
-- @since 0.2.2.0
setChildUserInherit
  :: ProcessConfig stdin stdout stderr
  -- ^
  -> ProcessConfig stdin stdout stderr
setChildUserInherit :: ProcessConfig stdin stdout stderr
-> ProcessConfig stdin stdout stderr
setChildUserInherit ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc { pcChildUser :: Maybe UserID
pcChildUser = Maybe UserID
forall a. Maybe a
Nothing }
#endif

-- | Create a new 'StreamSpec' from the given 'P.StdStream' and a
-- helper function. This function:
--
-- * Takes as input the raw @Maybe Handle@ returned by the
-- 'P.createProcess' function. The handle will be @Just@ 'Handle' if the
-- 'P.StdStream' argument is 'P.CreatePipe' and @Nothing@ otherwise.
-- See 'P.createProcess' for more details.
--
-- * Returns the actual stream value @a@, as well as a cleanup
-- function to be run when calling 'stopProcess'.
--
-- @since 0.1.0.0
mkStreamSpec :: P.StdStream
             -- ^
             -> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
             -- ^
             -> StreamSpec streamType a
mkStreamSpec :: StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
ss ProcessConfig () () () -> Maybe Handle -> IO (a, IO ())
f = (forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
forall a (streamType :: StreamType).
(forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkManagedStreamSpec ((StdStream -> IO b) -> StdStream -> IO b
forall a b. (a -> b) -> a -> b
$ StdStream
ss) ProcessConfig () () () -> Maybe Handle -> IO (a, IO ())
f

-- | Create a new 'StreamSpec' from a function that accepts a
-- 'P.StdStream' and a helper function.  This function is the same as
-- the helper in 'mkStreamSpec'
mkManagedStreamSpec :: (forall b. (P.StdStream -> IO b) -> IO b)
                    -- ^
                    -> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
                    -- ^
                    -> StreamSpec streamType a
mkManagedStreamSpec :: (forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkManagedStreamSpec forall b. (StdStream -> IO b) -> IO b
ss ProcessConfig () () () -> Maybe Handle -> IO (a, IO ())
f = (forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> Cleanup a)
-> StreamSpec streamType a
forall (streamType :: StreamType) a.
(forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> Cleanup a)
-> StreamSpec streamType a
StreamSpec forall b. (StdStream -> IO b) -> IO b
ss (\ProcessConfig () () ()
pc Maybe Handle
mh -> IO (a, IO ()) -> Cleanup a
forall a. IO (a, IO ()) -> Cleanup a
Cleanup (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ())
f ProcessConfig () () ()
pc Maybe Handle
mh))

-- | A stream spec which simply inherits the stream of the parent
-- process.
--
-- @since 0.1.0.0
inherit :: StreamSpec anyStreamType ()
inherit :: StreamSpec anyStreamType ()
inherit = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
P.Inherit (\ProcessConfig () () ()
_ Maybe Handle
Nothing -> ((), IO ()) -> IO ((), IO ())
forall (f :: * -> *) a. Applicative f => a -> f a
pure ((), () -> IO ()
forall (m :: * -> *) a. Monad m => a -> m a
return ()))

-- | A stream spec which is empty when used for for input and discards
-- output.  Note this requires your platform's null device to be
-- available when the process is started.
--
-- @since 0.2.5.0
nullStream :: StreamSpec anyStreamType ()
nullStream :: StreamSpec anyStreamType ()
nullStream = (forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a (streamType :: StreamType).
(forall b. (StdStream -> IO b) -> IO b)
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkManagedStreamSpec forall b. (StdStream -> IO b) -> IO b
opener ProcessConfig () () () -> Maybe Handle -> IO ((), IO ())
forall (m :: * -> *) (f :: * -> *) p p.
(Monad m, Applicative f) =>
p -> p -> f ((), m ())
cleanup
  where
    opener :: (StdStream -> IO r) -> IO r
opener StdStream -> IO r
f =
      FilePath -> IOMode -> (Handle -> IO r) -> IO r
forall r. FilePath -> IOMode -> (Handle -> IO r) -> IO r
withBinaryFile FilePath
nullDevice IOMode
ReadWriteMode ((Handle -> IO r) -> IO r) -> (Handle -> IO r) -> IO r
forall a b. (a -> b) -> a -> b
$ \Handle
handle ->
        StdStream -> IO r
f (Handle -> StdStream
P.UseHandle Handle
handle)
    cleanup :: p -> p -> f ((), m ())
cleanup p
_ p
_ =
      ((), m ()) -> f ((), m ())
forall (f :: * -> *) a. Applicative f => a -> f a
pure ((), () -> m ()
forall (m :: * -> *) a. Monad m => a -> m a
return ())

-- | A stream spec which will close the stream for the child process.
-- You usually do not want to use this, as it will leave the
-- corresponding file descriptor unassigned and hence available for
-- re-use in the child process.  Prefer 'nullStream' unless you're
-- certain you want this behavior.
--
-- @since 0.1.0.0
closed :: StreamSpec anyStreamType ()
#if MIN_VERSION_process(1, 4, 0)
closed :: StreamSpec anyStreamType ()
closed = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
P.NoStream (\ProcessConfig () () ()
_ Maybe Handle
Nothing -> ((), IO ()) -> IO ((), IO ())
forall (f :: * -> *) a. Applicative f => a -> f a
pure ((), () -> IO ()
forall (m :: * -> *) a. Monad m => a -> m a
return ()))
#else
closed = mkStreamSpec P.CreatePipe (\_ (Just h) -> ((), return ()) <$ hClose h)
#endif

-- | An input stream spec which sets the input to the given
-- 'L.ByteString'. A separate thread will be forked to write the
-- contents to the child process.
--
-- @since 0.1.0.0
byteStringInput :: L.ByteString -> StreamSpec 'STInput ()
byteStringInput :: ByteString -> StreamSpec 'STInput ()
byteStringInput ByteString
lbs = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec 'STInput ()
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
P.CreatePipe ((ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
 -> StreamSpec 'STInput ())
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec 'STInput ()
forall a b. (a -> b) -> a -> b
$ \ProcessConfig () () ()
_ (Just Handle
h) -> do
    IO (Async ()) -> IO ()
forall (f :: * -> *) a. Functor f => f a -> f ()
void (IO (Async ()) -> IO ()) -> IO (Async ()) -> IO ()
forall a b. (a -> b) -> a -> b
$ IO () -> IO (Async ())
forall a. IO a -> IO (Async a)
async (IO () -> IO (Async ())) -> IO () -> IO (Async ())
forall a b. (a -> b) -> a -> b
$ do
        Handle -> ByteString -> IO ()
L.hPut Handle
h ByteString
lbs
        Handle -> IO ()
hClose Handle
h
    ((), IO ()) -> IO ((), IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return ((), Handle -> IO ()
hClose Handle
h)

-- | Capture the output of a process in a 'L.ByteString'.
--
-- This function will fork a separate thread to consume all input from
-- the process, and will only make the results available when the
-- underlying 'Handle' is closed. As this is provided as an 'STM'
-- action, you can either check if the result is available, or block
-- until it's ready.
--
-- In the event of any exception occurring when reading from the
-- 'Handle', the 'STM' action will throw a
-- 'ByteStringOutputException'.
--
-- @since 0.1.0.0
byteStringOutput :: StreamSpec 'STOutput (STM L.ByteString)
byteStringOutput :: StreamSpec 'STOutput (STM ByteString)
byteStringOutput = StdStream
-> (ProcessConfig () () ()
    -> Maybe Handle -> IO (STM ByteString, IO ()))
-> StreamSpec 'STOutput (STM ByteString)
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
P.CreatePipe ((ProcessConfig () () ()
  -> Maybe Handle -> IO (STM ByteString, IO ()))
 -> StreamSpec 'STOutput (STM ByteString))
-> (ProcessConfig () () ()
    -> Maybe Handle -> IO (STM ByteString, IO ()))
-> StreamSpec 'STOutput (STM ByteString)
forall a b. (a -> b) -> a -> b
$ \ProcessConfig () () ()
pc (Just Handle
h) -> ProcessConfig () () () -> Handle -> IO (STM ByteString, IO ())
byteStringFromHandle ProcessConfig () () ()
pc Handle
h

-- | Helper function (not exposed) for both 'byteStringOutput' and
-- 'withProcessInterleave'. This will consume all of the output from
-- the given 'Handle' in a separate thread and provide access to the
-- resulting 'L.ByteString' via STM. Second action will close the
-- reader handle.
byteStringFromHandle
  :: ProcessConfig () () ()
  -> Handle -- ^ reader handle
  -> IO (STM L.ByteString, IO ())
byteStringFromHandle :: ProcessConfig () () () -> Handle -> IO (STM ByteString, IO ())
byteStringFromHandle ProcessConfig () () ()
pc Handle
h = do
    TMVar (Either ByteStringOutputException ByteString)
mvar <- IO (TMVar (Either ByteStringOutputException ByteString))
forall a. IO (TMVar a)
newEmptyTMVarIO

    IO (Async ()) -> IO ()
forall (f :: * -> *) a. Functor f => f a -> f ()
void (IO (Async ()) -> IO ()) -> IO (Async ()) -> IO ()
forall a b. (a -> b) -> a -> b
$ IO () -> IO (Async ())
forall a. IO a -> IO (Async a)
async (IO () -> IO (Async ())) -> IO () -> IO (Async ())
forall a b. (a -> b) -> a -> b
$ do
        let loop :: ([ByteString] -> [ByteString]) -> IO ()
loop [ByteString] -> [ByteString]
front = do
                ByteString
bs <- Handle -> Int -> IO ByteString
S.hGetSome Handle
h Int
defaultChunkSize
                if ByteString -> Bool
S.null ByteString
bs
                    then STM () -> IO ()
forall a. STM a -> IO a
atomically (STM () -> IO ()) -> STM () -> IO ()
forall a b. (a -> b) -> a -> b
$ TMVar (Either ByteStringOutputException ByteString)
-> Either ByteStringOutputException ByteString -> STM ()
forall a. TMVar a -> a -> STM ()
putTMVar TMVar (Either ByteStringOutputException ByteString)
mvar (Either ByteStringOutputException ByteString -> STM ())
-> Either ByteStringOutputException ByteString -> STM ()
forall a b. (a -> b) -> a -> b
$ ByteString -> Either ByteStringOutputException ByteString
forall a b. b -> Either a b
Right (ByteString -> Either ByteStringOutputException ByteString)
-> ByteString -> Either ByteStringOutputException ByteString
forall a b. (a -> b) -> a -> b
$ [ByteString] -> ByteString
L.fromChunks ([ByteString] -> ByteString) -> [ByteString] -> ByteString
forall a b. (a -> b) -> a -> b
$ [ByteString] -> [ByteString]
front []
                    else ([ByteString] -> [ByteString]) -> IO ()
loop (([ByteString] -> [ByteString]) -> IO ())
-> ([ByteString] -> [ByteString]) -> IO ()
forall a b. (a -> b) -> a -> b
$ [ByteString] -> [ByteString]
front ([ByteString] -> [ByteString])
-> ([ByteString] -> [ByteString]) -> [ByteString] -> [ByteString]
forall b c a. (b -> c) -> (a -> b) -> a -> c
. (ByteString
bsByteString -> [ByteString] -> [ByteString]
forall a. a -> [a] -> [a]
:)
        ([ByteString] -> [ByteString]) -> IO ()
loop [ByteString] -> [ByteString]
forall a. a -> a
id IO () -> (SomeException -> IO ()) -> IO ()
forall e a. Exception e => IO a -> (e -> IO a) -> IO a
`catch` \SomeException
e -> do
            STM () -> IO ()
forall a. STM a -> IO a
atomically (STM () -> IO ()) -> STM () -> IO ()
forall a b. (a -> b) -> a -> b
$ STM Bool -> STM ()
forall (f :: * -> *) a. Functor f => f a -> f ()
void (STM Bool -> STM ()) -> STM Bool -> STM ()
forall a b. (a -> b) -> a -> b
$ TMVar (Either ByteStringOutputException ByteString)
-> Either ByteStringOutputException ByteString -> STM Bool
forall a. TMVar a -> a -> STM Bool
tryPutTMVar TMVar (Either ByteStringOutputException ByteString)
mvar (Either ByteStringOutputException ByteString -> STM Bool)
-> Either ByteStringOutputException ByteString -> STM Bool
forall a b. (a -> b) -> a -> b
$ ByteStringOutputException
-> Either ByteStringOutputException ByteString
forall a b. a -> Either a b
Left (ByteStringOutputException
 -> Either ByteStringOutputException ByteString)
-> ByteStringOutputException
-> Either ByteStringOutputException ByteString
forall a b. (a -> b) -> a -> b
$ SomeException
-> ProcessConfig () () () -> ByteStringOutputException
ByteStringOutputException SomeException
e ProcessConfig () () ()
pc
            SomeException -> IO ()
forall e a. Exception e => e -> IO a
throwIO SomeException
e

    (STM ByteString, IO ()) -> IO (STM ByteString, IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return (TMVar (Either ByteStringOutputException ByteString)
-> STM (Either ByteStringOutputException ByteString)
forall a. TMVar a -> STM a
readTMVar TMVar (Either ByteStringOutputException ByteString)
mvar STM (Either ByteStringOutputException ByteString)
-> (Either ByteStringOutputException ByteString -> STM ByteString)
-> STM ByteString
forall (m :: * -> *) a b. Monad m => m a -> (a -> m b) -> m b
>>= (ByteStringOutputException -> STM ByteString)
-> (ByteString -> STM ByteString)
-> Either ByteStringOutputException ByteString
-> STM ByteString
forall a c b. (a -> c) -> (b -> c) -> Either a b -> c
either ByteStringOutputException -> STM ByteString
forall e a. Exception e => e -> STM a
throwSTM ByteString -> STM ByteString
forall (m :: * -> *) a. Monad m => a -> m a
return, Handle -> IO ()
hClose Handle
h)

-- | Create a new pipe between this process and the child, and return
-- a 'Handle' to communicate with the child.
--
-- @since 0.1.0.0
createPipe :: StreamSpec anyStreamType Handle
createPipe :: StreamSpec anyStreamType Handle
createPipe = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (Handle, IO ()))
-> StreamSpec anyStreamType Handle
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec StdStream
P.CreatePipe ((ProcessConfig () () () -> Maybe Handle -> IO (Handle, IO ()))
 -> StreamSpec anyStreamType Handle)
-> (ProcessConfig () () () -> Maybe Handle -> IO (Handle, IO ()))
-> StreamSpec anyStreamType Handle
forall a b. (a -> b) -> a -> b
$ \ProcessConfig () () ()
_ (Just Handle
h) -> (Handle, IO ()) -> IO (Handle, IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return (Handle
h, Handle -> IO ()
hClose Handle
h)

-- | Use the provided 'Handle' for the child process, and when the
-- process exits, do /not/ close it. This is useful if, for example,
-- you want to have multiple processes write to the same log file
-- sequentially.
--
-- @since 0.1.0.0
useHandleOpen :: Handle -> StreamSpec anyStreamType ()
useHandleOpen :: Handle -> StreamSpec anyStreamType ()
useHandleOpen Handle
h = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec (Handle -> StdStream
P.UseHandle Handle
h) ((ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
 -> StreamSpec anyStreamType ())
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a b. (a -> b) -> a -> b
$ \ProcessConfig () () ()
_ Maybe Handle
Nothing -> ((), IO ()) -> IO ((), IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return ((), () -> IO ()
forall (m :: * -> *) a. Monad m => a -> m a
return ())

-- | Use the provided 'Handle' for the child process, and when the
-- process exits, close it. If you have no reason to keep the 'Handle'
-- open, you should use this over 'useHandleOpen'.
--
-- @since 0.1.0.0
useHandleClose :: Handle -> StreamSpec anyStreamType ()
useHandleClose :: Handle -> StreamSpec anyStreamType ()
useHandleClose Handle
h = StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec (Handle -> StdStream
P.UseHandle Handle
h) ((ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
 -> StreamSpec anyStreamType ())
-> (ProcessConfig () () () -> Maybe Handle -> IO ((), IO ()))
-> StreamSpec anyStreamType ()
forall a b. (a -> b) -> a -> b
$ \ProcessConfig () () ()
_ Maybe Handle
Nothing -> ((), IO ()) -> IO ((), IO ())
forall (m :: * -> *) a. Monad m => a -> m a
return ((), Handle -> IO ()
hClose Handle
h)

-- | Launch a process based on the given 'ProcessConfig'. You should
-- ensure that you call 'stopProcess' on the result. It's usually
-- better to use one of the functions in this module which ensures
-- 'stopProcess' is called, such as 'withProcessWait'.
--
-- @since 0.1.0.0
startProcess :: MonadIO m
             => ProcessConfig stdin stdout stderr
             -- ^
             -> m (Process stdin stdout stderr)
startProcess :: ProcessConfig stdin stdout stderr
-> m (Process stdin stdout stderr)
startProcess pConfig' :: ProcessConfig stdin stdout stderr
pConfig'@ProcessConfig {Bool
Maybe FilePath
Maybe [(FilePath, FilePath)]
Maybe GroupID
Maybe UserID
CmdSpec
StreamSpec 'STInput stdin
StreamSpec 'STOutput stdout
StreamSpec 'STOutput stderr
pcChildUser :: Maybe UserID
pcChildGroup :: Maybe GroupID
pcNewSession :: Bool
pcCreateNewConsole :: Bool
pcDetachConsole :: Bool
pcDelegateCtlc :: Bool
pcCreateGroup :: Bool
pcCloseFds :: Bool
pcEnv :: Maybe [(FilePath, FilePath)]
pcWorkingDir :: Maybe FilePath
pcStderr :: StreamSpec 'STOutput stderr
pcStdout :: StreamSpec 'STOutput stdout
pcStdin :: StreamSpec 'STInput stdin
pcCmdSpec :: CmdSpec
pcChildUser :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe UserID
pcChildGroup :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe GroupID
pcNewSession :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcCreateNewConsole :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcDetachConsole :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcDelegateCtlc :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcCreateGroup :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcCloseFds :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Bool
pcEnv :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe [(FilePath, FilePath)]
pcWorkingDir :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> Maybe FilePath
pcStderr :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> StreamSpec 'STOutput stderr
pcStdout :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> StreamSpec 'STOutput stdout
pcStdin :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> StreamSpec 'STInput stdin
pcCmdSpec :: forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> CmdSpec
..} = IO (Process stdin stdout stderr) -> m (Process stdin stdout stderr)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (Process stdin stdout stderr)
 -> m (Process stdin stdout stderr))
-> IO (Process stdin stdout stderr)
-> m (Process stdin stdout stderr)
forall a b. (a -> b) -> a -> b
$ do
    StreamSpec 'STInput stdin -> forall b. (StdStream -> IO b) -> IO b
forall (streamType :: StreamType) a.
StreamSpec streamType a -> forall b. (StdStream -> IO b) -> IO b
ssStream StreamSpec 'STInput stdin
pcStdin ((StdStream -> IO (Process stdin stdout stderr))
 -> IO (Process stdin stdout stderr))
-> (StdStream -> IO (Process stdin stdout stderr))
-> IO (Process stdin stdout stderr)
forall a b. (a -> b) -> a -> b
$ \StdStream
realStdin ->
      StreamSpec 'STOutput stdout
-> forall b. (StdStream -> IO b) -> IO b
forall (streamType :: StreamType) a.
StreamSpec streamType a -> forall b. (StdStream -> IO b) -> IO b
ssStream StreamSpec 'STOutput stdout
pcStdout ((StdStream -> IO (Process stdin stdout stderr))
 -> IO (Process stdin stdout stderr))
-> (StdStream -> IO (Process stdin stdout stderr))
-> IO (Process stdin stdout stderr)
forall a b. (a -> b) -> a -> b
$ \StdStream
realStdout ->
        StreamSpec 'STOutput stderr
-> forall b. (StdStream -> IO b) -> IO b
forall (streamType :: StreamType) a.
StreamSpec streamType a -> forall b. (StdStream -> IO b) -> IO b
ssStream StreamSpec 'STOutput stderr
pcStderr ((StdStream -> IO (Process stdin stdout stderr))
 -> IO (Process stdin stdout stderr))
-> (StdStream -> IO (Process stdin stdout stderr))
-> IO (Process stdin stdout stderr)
forall a b. (a -> b) -> a -> b
$ \StdStream
realStderr -> do

          let cp0 :: CreateProcess
cp0 =
                  case CmdSpec
pcCmdSpec of
                      P.ShellCommand FilePath
cmd -> FilePath -> CreateProcess
P.shell FilePath
cmd
                      P.RawCommand FilePath
cmd [FilePath]
args -> FilePath -> [FilePath] -> CreateProcess
P.proc FilePath
cmd [FilePath]
args
              cp :: CreateProcess
cp = CreateProcess
cp0
                  { std_in :: StdStream
P.std_in = StdStream
realStdin
                  , std_out :: StdStream
P.std_out = StdStream
realStdout
                  , std_err :: StdStream
P.std_err = StdStream
realStderr
                  , cwd :: Maybe FilePath
P.cwd = Maybe FilePath
pcWorkingDir
                  , env :: Maybe [(FilePath, FilePath)]
P.env = Maybe [(FilePath, FilePath)]
pcEnv
                  , close_fds :: Bool
P.close_fds = Bool
pcCloseFds
                  , create_group :: Bool
P.create_group = Bool
pcCreateGroup
                  , delegate_ctlc :: Bool
P.delegate_ctlc = Bool
pcDelegateCtlc

#if MIN_VERSION_process(1, 3, 0)
                  , detach_console :: Bool
P.detach_console = Bool
pcDetachConsole
                  , create_new_console :: Bool
P.create_new_console = Bool
pcCreateNewConsole
                  , new_session :: Bool
P.new_session = Bool
pcNewSession
#endif

#if MIN_VERSION_process(1, 4, 0) && !WINDOWS
                  , child_group :: Maybe GroupID
P.child_group = Maybe GroupID
pcChildGroup
                  , child_user :: Maybe UserID
P.child_user = Maybe UserID
pcChildUser
#endif

                  }

          (Maybe Handle
minH, Maybe Handle
moutH, Maybe Handle
merrH, ProcessHandle
pHandle) <- FilePath
-> CreateProcess
-> IO (Maybe Handle, Maybe Handle, Maybe Handle, ProcessHandle)
P.createProcess_ FilePath
"startProcess" CreateProcess
cp

          ((stdin
pStdin, stdout
pStdout, stderr
pStderr), IO ()
pCleanup1) <- Cleanup (stdin, stdout, stderr)
-> IO ((stdin, stdout, stderr), IO ())
forall a. Cleanup a -> IO (a, IO ())
runCleanup (Cleanup (stdin, stdout, stderr)
 -> IO ((stdin, stdout, stderr), IO ()))
-> Cleanup (stdin, stdout, stderr)
-> IO ((stdin, stdout, stderr), IO ())
forall a b. (a -> b) -> a -> b
$ (,,)
              (stdin -> stdout -> stderr -> (stdin, stdout, stderr))
-> Cleanup stdin
-> Cleanup (stdout -> stderr -> (stdin, stdout, stderr))
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> StreamSpec 'STInput stdin
-> ProcessConfig () () () -> Maybe Handle -> Cleanup stdin
forall (streamType :: StreamType) a.
StreamSpec streamType a
-> ProcessConfig () () () -> Maybe Handle -> Cleanup a
ssCreate StreamSpec 'STInput stdin
pcStdin  ProcessConfig () () ()
pConfig Maybe Handle
minH
              Cleanup (stdout -> stderr -> (stdin, stdout, stderr))
-> Cleanup stdout -> Cleanup (stderr -> (stdin, stdout, stderr))
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> StreamSpec 'STOutput stdout
-> ProcessConfig () () () -> Maybe Handle -> Cleanup stdout
forall (streamType :: StreamType) a.
StreamSpec streamType a
-> ProcessConfig () () () -> Maybe Handle -> Cleanup a
ssCreate StreamSpec 'STOutput stdout
pcStdout ProcessConfig () () ()
pConfig Maybe Handle
moutH
              Cleanup (stderr -> (stdin, stdout, stderr))
-> Cleanup stderr -> Cleanup (stdin, stdout, stderr)
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> StreamSpec 'STOutput stderr
-> ProcessConfig () () () -> Maybe Handle -> Cleanup stderr
forall (streamType :: StreamType) a.
StreamSpec streamType a
-> ProcessConfig () () () -> Maybe Handle -> Cleanup a
ssCreate StreamSpec 'STOutput stderr
pcStderr ProcessConfig () () ()
pConfig Maybe Handle
merrH

          TMVar ExitCode
pExitCode <- IO (TMVar ExitCode)
forall a. IO (TMVar a)
newEmptyTMVarIO
          Async ExitCode
waitingThread <- ((forall b. IO b -> IO b) -> IO ExitCode) -> IO (Async ExitCode)
forall a. ((forall b. IO b -> IO b) -> IO a) -> IO (Async a)
asyncWithUnmask (((forall b. IO b -> IO b) -> IO ExitCode) -> IO (Async ExitCode))
-> ((forall b. IO b -> IO b) -> IO ExitCode) -> IO (Async ExitCode)
forall a b. (a -> b) -> a -> b
$ \forall b. IO b -> IO b
unmask -> do
              ExitCode
ec <- IO ExitCode -> IO ExitCode
forall b. IO b -> IO b
unmask (IO ExitCode -> IO ExitCode) -> IO ExitCode -> IO ExitCode
forall a b. (a -> b) -> a -> b
$ -- make sure the masking state from a bracket isn't inherited
                if Bool
multiThreadedRuntime
                  then ProcessHandle -> IO ExitCode
P.waitForProcess ProcessHandle
pHandle
                  else do
                    Int
switchTime <- RtsTime -> Int
forall a b. (Integral a, Num b) => a -> b
fromIntegral (RtsTime -> Int) -> (ConcFlags -> RtsTime) -> ConcFlags -> Int
forall b c a. (b -> c) -> (a -> b) -> a -> c
. (RtsTime -> RtsTime -> RtsTime
forall a. Integral a => a -> a -> a
`div` RtsTime
1000) (RtsTime -> RtsTime)
-> (ConcFlags -> RtsTime) -> ConcFlags -> RtsTime
forall b c a. (b -> c) -> (a -> b) -> a -> c
. ConcFlags -> RtsTime
ctxtSwitchTime
                              (ConcFlags -> Int) -> IO ConcFlags -> IO Int
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> IO ConcFlags
getConcFlags
                    let minDelay :: Int
minDelay = Int
1
                        maxDelay :: Int
maxDelay = Int -> Int -> Int
forall a. Ord a => a -> a -> a
max Int
minDelay Int
switchTime
                        loop :: Int -> IO ExitCode
loop Int
delay = do
                          Int -> IO ()
threadDelay Int
delay
                          Maybe ExitCode
mec <- ProcessHandle -> IO (Maybe ExitCode)
P.getProcessExitCode ProcessHandle
pHandle
                          case Maybe ExitCode
mec of
                            Maybe ExitCode
Nothing -> Int -> IO ExitCode
loop (Int -> IO ExitCode) -> Int -> IO ExitCode
forall a b. (a -> b) -> a -> b
$ Int -> Int -> Int
forall a. Ord a => a -> a -> a
min Int
maxDelay (Int
delay Int -> Int -> Int
forall a. Num a => a -> a -> a
* Int
2)
                            Just ExitCode
ec -> ExitCode -> IO ExitCode
forall (f :: * -> *) a. Applicative f => a -> f a
pure ExitCode
ec
                    Int -> IO ExitCode
loop Int
minDelay
              STM () -> IO ()
forall a. STM a -> IO a
atomically (STM () -> IO ()) -> STM () -> IO ()
forall a b. (a -> b) -> a -> b
$ TMVar ExitCode -> ExitCode -> STM ()
forall a. TMVar a -> a -> STM ()
putTMVar TMVar ExitCode
pExitCode ExitCode
ec
              ExitCode -> IO ExitCode
forall (m :: * -> *) a. Monad m => a -> m a
return ExitCode
ec

          let pCleanup :: IO ()
pCleanup = IO ()
pCleanup1 IO () -> IO () -> IO ()
forall (m :: * -> *) a. MonadUnliftIO m => m a -> IO () -> m a
`finally` do
                  -- First: stop calling waitForProcess, so that we can
                  -- avoid race conditions where the process is removed from
                  -- the system process table while we're trying to
                  -- terminate it.
                  Async ExitCode -> IO ()
forall a. Async a -> IO ()
cancel Async ExitCode
waitingThread

                  -- Now check if the process had already exited
                  Either SomeException ExitCode
eec <- Async ExitCode -> IO (Either SomeException ExitCode)
forall a. Async a -> IO (Either SomeException a)
waitCatch Async ExitCode
waitingThread

                  case Either SomeException ExitCode
eec of
                      -- Process already exited, nothing to do
                      Right ExitCode
_ec -> () -> IO ()
forall (m :: * -> *) a. Monad m => a -> m a
return ()

                      -- Process didn't exit yet, let's terminate it and
                      -- then call waitForProcess ourselves
                      Left SomeException
_ -> do
                          Either IOError ()
eres <- IO () -> IO (Either IOError ())
forall e a. Exception e => IO a -> IO (Either e a)
try (IO () -> IO (Either IOError ()))
-> IO () -> IO (Either IOError ())
forall a b. (a -> b) -> a -> b
$ ProcessHandle -> IO ()
P.terminateProcess ProcessHandle
pHandle
                          ExitCode
ec <-
                            case Either IOError ()
eres of
                              Left IOError
e
                                -- On Windows, with the single-threaded runtime, it
                                -- seems that if a process has already exited, the
                                -- call to terminateProcess will fail with a
                                -- permission denied error. To work around this, we
                                -- catch this exception and then immediately
                                -- waitForProcess. There's a chance that there may be
                                -- other reasons for this permission error to appear,
                                -- in which case this code may allow us to wait too
                                -- long for a child process instead of erroring out.
                                -- Recommendation: always use the multi-threaded
                                -- runtime!
                                | IOError -> Bool
isPermissionError IOError
e Bool -> Bool -> Bool
&& Bool -> Bool
not Bool
multiThreadedRuntime Bool -> Bool -> Bool
&& Bool
isWindows ->
                                  ProcessHandle -> IO ExitCode
P.waitForProcess ProcessHandle
pHandle
                                | Bool
otherwise -> IOError -> IO ExitCode
forall e a. Exception e => e -> IO a
throwIO IOError
e
                              Right () -> ProcessHandle -> IO ExitCode
P.waitForProcess ProcessHandle
pHandle
                          Bool
success <- STM Bool -> IO Bool
forall a. STM a -> IO a
atomically (STM Bool -> IO Bool) -> STM Bool -> IO Bool
forall a b. (a -> b) -> a -> b
$ TMVar ExitCode -> ExitCode -> STM Bool
forall a. TMVar a -> a -> STM Bool
tryPutTMVar TMVar ExitCode
pExitCode ExitCode
ec
                          () -> IO ()
forall a. a -> IO a
evaluate (() -> IO ()) -> () -> IO ()
forall a b. (a -> b) -> a -> b
$ Bool -> () -> ()
forall a. (?callStack::CallStack) => Bool -> a -> a
assert Bool
success ()

          Process stdin stdout stderr -> IO (Process stdin stdout stderr)
forall (m :: * -> *) a. Monad m => a -> m a
return Process :: forall stdin stdout stderr.
ProcessConfig () () ()
-> IO ()
-> stdin
-> stdout
-> stderr
-> ProcessHandle
-> TMVar ExitCode
-> Process stdin stdout stderr
Process {stdin
stdout
stderr
IO ()
ProcessHandle
TMVar ExitCode
ProcessConfig () () ()
pCleanup :: IO ()
pExitCode :: TMVar ExitCode
pConfig :: ProcessConfig () () ()
pStderr :: stderr
pStdout :: stdout
pStdin :: stdin
pHandle :: ProcessHandle
pExitCode :: TMVar ExitCode
pHandle :: ProcessHandle
pStderr :: stderr
pStdout :: stdout
pStdin :: stdin
pCleanup :: IO ()
pConfig :: ProcessConfig () () ()
..}
  where
    pConfig :: ProcessConfig () () ()
pConfig = ProcessConfig stdin stdout stderr -> ProcessConfig () () ()
forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> ProcessConfig () () ()
clearStreams ProcessConfig stdin stdout stderr
pConfig'

foreign import ccall unsafe "rtsSupportsBoundThreads"
  multiThreadedRuntime :: Bool

isWindows :: Bool
#if WINDOWS
isWindows = True
#else
isWindows :: Bool
isWindows = Bool
False
#endif

-- | Close a process and release any resources acquired. This will
-- ensure 'P.terminateProcess' is called, wait for the process to
-- actually exit, and then close out resources allocated for the
-- streams. In the event of any cleanup exceptions being thrown this
-- will throw an exception.
--
-- @since 0.1.0.0
stopProcess :: MonadIO m
            => Process stdin stdout stderr
            -> m ()
stopProcess :: Process stdin stdout stderr -> m ()
stopProcess = IO () -> m ()
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO () -> m ())
-> (Process stdin stdout stderr -> IO ())
-> Process stdin stdout stderr
-> m ()
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> IO ()
forall stdin stdout stderr. Process stdin stdout stderr -> IO ()
pCleanup

-- | Uses the bracket pattern to call 'startProcess' and ensures that
-- 'stopProcess' is called.
--
-- This function is usually /not/ what you want. You're likely better
-- off using 'withProcessWait'. See
-- <https://github.com/fpco/typed-process/issues/25>.
--
-- @since 0.2.5.0
withProcessTerm :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -- ^
  -> (Process stdin stdout stderr -> m a)
  -- ^
  -> m a
withProcessTerm :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessTerm ProcessConfig stdin stdout stderr
config = IO (Process stdin stdout stderr)
-> (Process stdin stdout stderr -> IO ())
-> (Process stdin stdout stderr -> m a)
-> m a
forall (m :: * -> *) a b c.
MonadUnliftIO m =>
IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket (ProcessConfig stdin stdout stderr
-> IO (Process stdin stdout stderr)
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
ProcessConfig stdin stdout stderr
-> m (Process stdin stdout stderr)
startProcess ProcessConfig stdin stdout stderr
config) Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
stopProcess

-- | Uses the bracket pattern to call 'startProcess'. Unlike
-- 'withProcessTerm', this function will wait for the child process to
-- exit, and only kill it with 'stopProcess' in the event that the
-- inner function throws an exception.
--
-- To interact with a @Process@ use the functions from the section
-- [Interact with a process](#interactwithaprocess).
--
-- @since 0.2.5.0
withProcessWait :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -- ^
  -> (Process stdin stdout stderr -> m a)
  -- ^
  -> m a
withProcessWait :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessWait ProcessConfig stdin stdout stderr
config Process stdin stdout stderr -> m a
f =
  IO (Process stdin stdout stderr)
-> (Process stdin stdout stderr -> IO ())
-> (Process stdin stdout stderr -> m a)
-> m a
forall (m :: * -> *) a b c.
MonadUnliftIO m =>
IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket
    (ProcessConfig stdin stdout stderr
-> IO (Process stdin stdout stderr)
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
ProcessConfig stdin stdout stderr
-> m (Process stdin stdout stderr)
startProcess ProcessConfig stdin stdout stderr
config)
    Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
stopProcess
    (\Process stdin stdout stderr
p -> Process stdin stdout stderr -> m a
f Process stdin stdout stderr
p m a -> m ExitCode -> m a
forall (f :: * -> *) a b. Applicative f => f a -> f b -> f a
<* Process stdin stdout stderr -> m ExitCode
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ExitCode
waitExitCode Process stdin stdout stderr
p)

-- | Deprecated synonym for 'withProcessTerm'.
--
-- @since 0.1.0.0
withProcess :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -> (Process stdin stdout stderr -> m a)
  -> m a
withProcess :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess = ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessTerm
{-# DEPRECATED withProcess "Please consider using withProcessWait, or instead use withProcessTerm" #-}

-- | Same as 'withProcessTerm', but also calls 'checkExitCode'
--
-- To interact with a @Process@ use the functions from the section
-- [Interact with a process](#interactwithaprocess).
--
-- @since 0.2.5.0
withProcessTerm_ :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -- ^
  -> (Process stdin stdout stderr -> m a)
  -- ^
  -> m a
withProcessTerm_ :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessTerm_ ProcessConfig stdin stdout stderr
config = IO (Process stdin stdout stderr)
-> (Process stdin stdout stderr -> IO ())
-> (Process stdin stdout stderr -> m a)
-> m a
forall (m :: * -> *) a b c.
MonadUnliftIO m =>
IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket
    (ProcessConfig stdin stdout stderr
-> IO (Process stdin stdout stderr)
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
ProcessConfig stdin stdout stderr
-> m (Process stdin stdout stderr)
startProcess ProcessConfig stdin stdout stderr
config)
    (\Process stdin stdout stderr
p -> Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
stopProcess Process stdin stdout stderr
p IO () -> IO () -> IO ()
forall (m :: * -> *) a. MonadUnliftIO m => m a -> IO () -> m a
`finally` Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
checkExitCode Process stdin stdout stderr
p)

-- | Same as 'withProcessWait', but also calls 'checkExitCode'
--
-- @since 0.2.5.0
withProcessWait_ :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -- ^
  -> (Process stdin stdout stderr -> m a)
  -- ^
  -> m a
withProcessWait_ :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessWait_ ProcessConfig stdin stdout stderr
config Process stdin stdout stderr -> m a
f = IO (Process stdin stdout stderr)
-> (Process stdin stdout stderr -> IO ())
-> (Process stdin stdout stderr -> m a)
-> m a
forall (m :: * -> *) a b c.
MonadUnliftIO m =>
IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket
    (ProcessConfig stdin stdout stderr
-> IO (Process stdin stdout stderr)
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
ProcessConfig stdin stdout stderr
-> m (Process stdin stdout stderr)
startProcess ProcessConfig stdin stdout stderr
config)
    Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
stopProcess
    (\Process stdin stdout stderr
p -> Process stdin stdout stderr -> m a
f Process stdin stdout stderr
p m a -> m () -> m a
forall (f :: * -> *) a b. Applicative f => f a -> f b -> f a
<* Process stdin stdout stderr -> m ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
checkExitCode Process stdin stdout stderr
p)

-- | Deprecated synonym for 'withProcessTerm_'.
--
-- @since 0.1.0.0
withProcess_ :: (MonadUnliftIO m)
  => ProcessConfig stdin stdout stderr
  -> (Process stdin stdout stderr -> m a)
  -> m a
withProcess_ :: ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess_ = ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcessTerm_
{-# DEPRECATED withProcess_ "Please consider using withProcessWait_, or instead use withProcessTerm_" #-}

-- | Run a process, capture its standard output and error as a
-- 'L.ByteString', wait for it to complete, and then return its exit
-- code, output, and error.
--
-- Note that any previously used 'setStdout' or 'setStderr' will be
-- overridden.
--
-- @since 0.1.0.0
readProcess :: MonadIO m
            => ProcessConfig stdin stdoutIgnored stderrIgnored
            -- ^
            -> m (ExitCode, L.ByteString, L.ByteString)
readProcess :: ProcessConfig stdin stdoutIgnored stderrIgnored
-> m (ExitCode, ByteString, ByteString)
readProcess ProcessConfig stdin stdoutIgnored stderrIgnored
pc =
    IO (ExitCode, ByteString, ByteString)
-> m (ExitCode, ByteString, ByteString)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (ExitCode, ByteString, ByteString)
 -> m (ExitCode, ByteString, ByteString))
-> IO (ExitCode, ByteString, ByteString)
-> m (ExitCode, ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin (STM ByteString) (STM ByteString)
-> (Process stdin (STM ByteString) (STM ByteString)
    -> IO (ExitCode, ByteString, ByteString))
-> IO (ExitCode, ByteString, ByteString)
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin (STM ByteString) (STM ByteString)
pc' ((Process stdin (STM ByteString) (STM ByteString)
  -> IO (ExitCode, ByteString, ByteString))
 -> IO (ExitCode, ByteString, ByteString))
-> (Process stdin (STM ByteString) (STM ByteString)
    -> IO (ExitCode, ByteString, ByteString))
-> IO (ExitCode, ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) (STM ByteString)
p -> STM (ExitCode, ByteString, ByteString)
-> IO (ExitCode, ByteString, ByteString)
forall a. STM a -> IO a
atomically (STM (ExitCode, ByteString, ByteString)
 -> IO (ExitCode, ByteString, ByteString))
-> STM (ExitCode, ByteString, ByteString)
-> IO (ExitCode, ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ (,,)
        (ExitCode
 -> ByteString -> ByteString -> (ExitCode, ByteString, ByteString))
-> STM ExitCode
-> STM
     (ByteString -> ByteString -> (ExitCode, ByteString, ByteString))
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> Process stdin (STM ByteString) (STM ByteString) -> STM ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM Process stdin (STM ByteString) (STM ByteString)
p
        STM
  (ByteString -> ByteString -> (ExitCode, ByteString, ByteString))
-> STM ByteString
-> STM (ByteString -> (ExitCode, ByteString, ByteString))
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> Process stdin (STM ByteString) (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) (STM ByteString)
p
        STM (ByteString -> (ExitCode, ByteString, ByteString))
-> STM ByteString -> STM (ExitCode, ByteString, ByteString)
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> Process stdin (STM ByteString) (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stderr
getStderr Process stdin (STM ByteString) (STM ByteString)
p
  where
    pc' :: ProcessConfig stdin (STM ByteString) (STM ByteString)
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
-> ProcessConfig stdin (STM ByteString) (STM ByteString)
forall stdout stdin stdout0 stderr.
StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout StreamSpec 'STOutput (STM ByteString)
byteStringOutput
        (ProcessConfig stdin stdoutIgnored (STM ByteString)
 -> ProcessConfig stdin (STM ByteString) (STM ByteString))
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
-> ProcessConfig stdin (STM ByteString) (STM ByteString)
forall a b. (a -> b) -> a -> b
$ StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored stderrIgnored
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
forall stderr stdin stdout stderr0.
StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdoutIgnored stderrIgnored
pc

-- | Same as 'readProcess', but instead of returning the 'ExitCode',
-- checks it with 'checkExitCode'.
--
-- Exceptions thrown by this function will include stdout and stderr.
--
-- @since 0.1.0.0
readProcess_ :: MonadIO m
             => ProcessConfig stdin stdoutIgnored stderrIgnored
             -- ^
             -> m (L.ByteString, L.ByteString)
readProcess_ :: ProcessConfig stdin stdoutIgnored stderrIgnored
-> m (ByteString, ByteString)
readProcess_ ProcessConfig stdin stdoutIgnored stderrIgnored
pc =
    IO (ByteString, ByteString) -> m (ByteString, ByteString)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (ByteString, ByteString) -> m (ByteString, ByteString))
-> IO (ByteString, ByteString) -> m (ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin (STM ByteString) (STM ByteString)
-> (Process stdin (STM ByteString) (STM ByteString)
    -> IO (ByteString, ByteString))
-> IO (ByteString, ByteString)
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin (STM ByteString) (STM ByteString)
pc' ((Process stdin (STM ByteString) (STM ByteString)
  -> IO (ByteString, ByteString))
 -> IO (ByteString, ByteString))
-> (Process stdin (STM ByteString) (STM ByteString)
    -> IO (ByteString, ByteString))
-> IO (ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) (STM ByteString)
p -> STM (ByteString, ByteString) -> IO (ByteString, ByteString)
forall a. STM a -> IO a
atomically (STM (ByteString, ByteString) -> IO (ByteString, ByteString))
-> STM (ByteString, ByteString) -> IO (ByteString, ByteString)
forall a b. (a -> b) -> a -> b
$ do
        ByteString
stdout <- Process stdin (STM ByteString) (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) (STM ByteString)
p
        ByteString
stderr <- Process stdin (STM ByteString) (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stderr
getStderr Process stdin (STM ByteString) (STM ByteString)
p
        Process stdin (STM ByteString) (STM ByteString) -> STM ()
forall stdin stdout stderr. Process stdin stdout stderr -> STM ()
checkExitCodeSTM Process stdin (STM ByteString) (STM ByteString)
p STM () -> (ExitCodeException -> STM ()) -> STM ()
forall e a. Exception e => STM a -> (e -> STM a) -> STM a
`catchSTM` \ExitCodeException
ece -> ExitCodeException -> STM ()
forall e a. Exception e => e -> STM a
throwSTM ExitCodeException
ece
            { eceStdout :: ByteString
eceStdout = ByteString
stdout
            , eceStderr :: ByteString
eceStderr = ByteString
stderr
            }
        (ByteString, ByteString) -> STM (ByteString, ByteString)
forall (m :: * -> *) a. Monad m => a -> m a
return (ByteString
stdout, ByteString
stderr)
  where
    pc' :: ProcessConfig stdin (STM ByteString) (STM ByteString)
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
-> ProcessConfig stdin (STM ByteString) (STM ByteString)
forall stdout stdin stdout0 stderr.
StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout StreamSpec 'STOutput (STM ByteString)
byteStringOutput
        (ProcessConfig stdin stdoutIgnored (STM ByteString)
 -> ProcessConfig stdin (STM ByteString) (STM ByteString))
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
-> ProcessConfig stdin (STM ByteString) (STM ByteString)
forall a b. (a -> b) -> a -> b
$ StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored stderrIgnored
-> ProcessConfig stdin stdoutIgnored (STM ByteString)
forall stderr stdin stdout stderr0.
StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdoutIgnored stderrIgnored
pc

-- | Same as 'readProcess', but only read the stdout of the process. Original settings for stderr remain.
--
-- @since 0.2.1.0
readProcessStdout
  :: MonadIO m
  => ProcessConfig stdin stdoutIgnored stderr
  -- ^
  -> m (ExitCode, L.ByteString)
readProcessStdout :: ProcessConfig stdin stdoutIgnored stderr
-> m (ExitCode, ByteString)
readProcessStdout ProcessConfig stdin stdoutIgnored stderr
pc =
    IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (ExitCode, ByteString) -> m (ExitCode, ByteString))
-> IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin (STM ByteString) stderr
-> (Process stdin (STM ByteString) stderr
    -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin (STM ByteString) stderr
pc' ((Process stdin (STM ByteString) stderr
  -> IO (ExitCode, ByteString))
 -> IO (ExitCode, ByteString))
-> (Process stdin (STM ByteString) stderr
    -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) stderr
p -> STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a. STM a -> IO a
atomically (STM (ExitCode, ByteString) -> IO (ExitCode, ByteString))
-> STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ (,)
        (ExitCode -> ByteString -> (ExitCode, ByteString))
-> STM ExitCode -> STM (ByteString -> (ExitCode, ByteString))
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> Process stdin (STM ByteString) stderr -> STM ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM Process stdin (STM ByteString) stderr
p
        STM (ByteString -> (ExitCode, ByteString))
-> STM ByteString -> STM (ExitCode, ByteString)
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> Process stdin (STM ByteString) stderr -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) stderr
p
  where
    pc' :: ProcessConfig stdin (STM ByteString) stderr
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored stderr
-> ProcessConfig stdin (STM ByteString) stderr
forall stdout stdin stdout0 stderr.
StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdoutIgnored stderr
pc

-- | Same as 'readProcessStdout', but instead of returning the
-- 'ExitCode', checks it with 'checkExitCode'.
--
-- Exceptions thrown by this function will include stdout.
--
-- @since 0.2.1.0
readProcessStdout_
  :: MonadIO m
  => ProcessConfig stdin stdoutIgnored stderr
  -- ^
  -> m L.ByteString
readProcessStdout_ :: ProcessConfig stdin stdoutIgnored stderr -> m ByteString
readProcessStdout_ ProcessConfig stdin stdoutIgnored stderr
pc =
    IO ByteString -> m ByteString
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO ByteString -> m ByteString) -> IO ByteString -> m ByteString
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin (STM ByteString) stderr
-> (Process stdin (STM ByteString) stderr -> IO ByteString)
-> IO ByteString
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin (STM ByteString) stderr
pc' ((Process stdin (STM ByteString) stderr -> IO ByteString)
 -> IO ByteString)
-> (Process stdin (STM ByteString) stderr -> IO ByteString)
-> IO ByteString
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) stderr
p -> STM ByteString -> IO ByteString
forall a. STM a -> IO a
atomically (STM ByteString -> IO ByteString)
-> STM ByteString -> IO ByteString
forall a b. (a -> b) -> a -> b
$ do
        ByteString
stdout <- Process stdin (STM ByteString) stderr -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) stderr
p
        Process stdin (STM ByteString) stderr -> STM ()
forall stdin stdout stderr. Process stdin stdout stderr -> STM ()
checkExitCodeSTM Process stdin (STM ByteString) stderr
p STM () -> (ExitCodeException -> STM ()) -> STM ()
forall e a. Exception e => STM a -> (e -> STM a) -> STM a
`catchSTM` \ExitCodeException
ece -> ExitCodeException -> STM ()
forall e a. Exception e => e -> STM a
throwSTM ExitCodeException
ece
            { eceStdout :: ByteString
eceStdout = ByteString
stdout
            }
        ByteString -> STM ByteString
forall (m :: * -> *) a. Monad m => a -> m a
return ByteString
stdout
  where
    pc' :: ProcessConfig stdin (STM ByteString) stderr
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored stderr
-> ProcessConfig stdin (STM ByteString) stderr
forall stdout stdin stdout0 stderr.
StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdoutIgnored stderr
pc

-- | Same as 'readProcess', but only read the stderr of the process.
-- Original settings for stdout remain.
--
-- @since 0.2.1.0
readProcessStderr
  :: MonadIO m
  => ProcessConfig stdin stdout stderrIgnored
  -- ^
  -> m (ExitCode, L.ByteString)
readProcessStderr :: ProcessConfig stdin stdout stderrIgnored
-> m (ExitCode, ByteString)
readProcessStderr ProcessConfig stdin stdout stderrIgnored
pc =
    IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (ExitCode, ByteString) -> m (ExitCode, ByteString))
-> IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin stdout (STM ByteString)
-> (Process stdin stdout (STM ByteString)
    -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin stdout (STM ByteString)
pc' ((Process stdin stdout (STM ByteString)
  -> IO (ExitCode, ByteString))
 -> IO (ExitCode, ByteString))
-> (Process stdin stdout (STM ByteString)
    -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ \Process stdin stdout (STM ByteString)
p -> STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a. STM a -> IO a
atomically (STM (ExitCode, ByteString) -> IO (ExitCode, ByteString))
-> STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ (,)
        (ExitCode -> ByteString -> (ExitCode, ByteString))
-> STM ExitCode -> STM (ByteString -> (ExitCode, ByteString))
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> Process stdin stdout (STM ByteString) -> STM ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM Process stdin stdout (STM ByteString)
p
        STM (ByteString -> (ExitCode, ByteString))
-> STM ByteString -> STM (ExitCode, ByteString)
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> Process stdin stdout (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stderr
getStderr Process stdin stdout (STM ByteString)
p
  where
    pc' :: ProcessConfig stdin stdout (STM ByteString)
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdout stderrIgnored
-> ProcessConfig stdin stdout (STM ByteString)
forall stderr stdin stdout stderr0.
StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdout stderrIgnored
pc

-- | Same as 'readProcessStderr', but instead of returning the
-- 'ExitCode', checks it with 'checkExitCode'.
--
-- Exceptions thrown by this function will include stderr.
--
-- @since 0.2.1.0
readProcessStderr_
  :: MonadIO m
  => ProcessConfig stdin stdout stderrIgnored
  -- ^
  -> m L.ByteString
readProcessStderr_ :: ProcessConfig stdin stdout stderrIgnored -> m ByteString
readProcessStderr_ ProcessConfig stdin stdout stderrIgnored
pc =
    IO ByteString -> m ByteString
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO ByteString -> m ByteString) -> IO ByteString -> m ByteString
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin stdout (STM ByteString)
-> (Process stdin stdout (STM ByteString) -> IO ByteString)
-> IO ByteString
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin stdout (STM ByteString)
pc' ((Process stdin stdout (STM ByteString) -> IO ByteString)
 -> IO ByteString)
-> (Process stdin stdout (STM ByteString) -> IO ByteString)
-> IO ByteString
forall a b. (a -> b) -> a -> b
$ \Process stdin stdout (STM ByteString)
p -> STM ByteString -> IO ByteString
forall a. STM a -> IO a
atomically (STM ByteString -> IO ByteString)
-> STM ByteString -> IO ByteString
forall a b. (a -> b) -> a -> b
$ do
        ByteString
stderr <- Process stdin stdout (STM ByteString) -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stderr
getStderr Process stdin stdout (STM ByteString)
p
        Process stdin stdout (STM ByteString) -> STM ()
forall stdin stdout stderr. Process stdin stdout stderr -> STM ()
checkExitCodeSTM Process stdin stdout (STM ByteString)
p STM () -> (ExitCodeException -> STM ()) -> STM ()
forall e a. Exception e => STM a -> (e -> STM a) -> STM a
`catchSTM` \ExitCodeException
ece -> ExitCodeException -> STM ()
forall e a. Exception e => e -> STM a
throwSTM ExitCodeException
ece
            { eceStderr :: ByteString
eceStderr = ByteString
stderr
            }
        ByteString -> STM ByteString
forall (m :: * -> *) a. Monad m => a -> m a
return ByteString
stderr
  where
    pc' :: ProcessConfig stdin stdout (STM ByteString)
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdout stderrIgnored
-> ProcessConfig stdin stdout (STM ByteString)
forall stderr stdin stdout stderr0.
StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr StreamSpec 'STOutput (STM ByteString)
byteStringOutput ProcessConfig stdin stdout stderrIgnored
pc

withProcessInterleave :: (MonadUnliftIO m)
  => ProcessConfig stdin stdoutIgnored stderrIgnored
  -- ^
  -> (Process stdin (STM L.ByteString) () -> m a)
  -- ^
  -> m a
withProcessInterleave :: ProcessConfig stdin stdoutIgnored stderrIgnored
-> (Process stdin (STM ByteString) () -> m a) -> m a
withProcessInterleave ProcessConfig stdin stdoutIgnored stderrIgnored
pc Process stdin (STM ByteString) () -> m a
inner =
    -- Create a pipe to be shared for both stdout and stderr
    IO (Handle, Handle)
-> ((Handle, Handle) -> IO ()) -> ((Handle, Handle) -> m a) -> m a
forall (m :: * -> *) a b c.
MonadUnliftIO m =>
IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket IO (Handle, Handle)
P.createPipe (\(Handle
r, Handle
w) -> Handle -> IO ()
hClose Handle
r IO () -> IO () -> IO ()
forall (m :: * -> *) a b. Monad m => m a -> m b -> m b
>> Handle -> IO ()
hClose Handle
w) (((Handle, Handle) -> m a) -> m a)
-> ((Handle, Handle) -> m a) -> m a
forall a b. (a -> b) -> a -> b
$ \(Handle
readEnd, Handle
writeEnd) -> do
        -- Use the writer end of the pipe for both stdout and stderr. For
        -- the stdout half, use byteStringFromHandle to read the data into
        -- a lazy ByteString in memory.
        let pc' :: ProcessConfig stdin (STM ByteString) ()
pc' = StreamSpec 'STOutput (STM ByteString)
-> ProcessConfig stdin stdoutIgnored ()
-> ProcessConfig stdin (STM ByteString) ()
forall stdout stdin stdout0 stderr.
StreamSpec 'STOutput stdout
-> ProcessConfig stdin stdout0 stderr
-> ProcessConfig stdin stdout stderr
setStdout (StdStream
-> (ProcessConfig () () ()
    -> Maybe Handle -> IO (STM ByteString, IO ()))
-> StreamSpec 'STOutput (STM ByteString)
forall a (streamType :: StreamType).
StdStream
-> (ProcessConfig () () () -> Maybe Handle -> IO (a, IO ()))
-> StreamSpec streamType a
mkStreamSpec (Handle -> StdStream
P.UseHandle Handle
writeEnd) (\ProcessConfig () () ()
pc'' Maybe Handle
Nothing -> ProcessConfig () () () -> Handle -> IO (STM ByteString, IO ())
byteStringFromHandle ProcessConfig () () ()
pc'' Handle
readEnd))
                (ProcessConfig stdin stdoutIgnored ()
 -> ProcessConfig stdin (STM ByteString) ())
-> ProcessConfig stdin stdoutIgnored ()
-> ProcessConfig stdin (STM ByteString) ()
forall a b. (a -> b) -> a -> b
$ StreamSpec 'STOutput ()
-> ProcessConfig stdin stdoutIgnored stderrIgnored
-> ProcessConfig stdin stdoutIgnored ()
forall stderr stdin stdout stderr0.
StreamSpec 'STOutput stderr
-> ProcessConfig stdin stdout stderr0
-> ProcessConfig stdin stdout stderr
setStderr (Handle -> StreamSpec 'STOutput ()
forall (anyStreamType :: StreamType).
Handle -> StreamSpec anyStreamType ()
useHandleOpen Handle
writeEnd)
                  ProcessConfig stdin stdoutIgnored stderrIgnored
pc
        ProcessConfig stdin (STM ByteString) ()
-> (Process stdin (STM ByteString) () -> m a) -> m a
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin (STM ByteString) ()
pc' ((Process stdin (STM ByteString) () -> m a) -> m a)
-> (Process stdin (STM ByteString) () -> m a) -> m a
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) ()
p -> do
          -- Now that the process is forked, close the writer end of this
          -- pipe, otherwise the reader end will never give an EOF.
          IO () -> m ()
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO () -> m ()) -> IO () -> m ()
forall a b. (a -> b) -> a -> b
$ Handle -> IO ()
hClose Handle
writeEnd
          Process stdin (STM ByteString) () -> m a
inner Process stdin (STM ByteString) ()
p

-- | Same as 'readProcess', but interleaves stderr with stdout.
--
-- Motivation: Use this function if you need stdout interleaved with stderr
-- output (e.g. from an HTTP server) in order to debug failures.
--
-- @since 0.2.4.0
readProcessInterleaved
  :: MonadIO m
  => ProcessConfig stdin stdoutIgnored stderrIgnored
  -- ^
  -> m (ExitCode, L.ByteString)
readProcessInterleaved :: ProcessConfig stdin stdoutIgnored stderrIgnored
-> m (ExitCode, ByteString)
readProcessInterleaved ProcessConfig stdin stdoutIgnored stderrIgnored
pc =
    IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (ExitCode, ByteString) -> m (ExitCode, ByteString))
-> IO (ExitCode, ByteString) -> m (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$
    ProcessConfig stdin stdoutIgnored stderrIgnored
-> (Process stdin (STM ByteString) () -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall (m :: * -> *) stdin stdoutIgnored stderrIgnored a.
MonadUnliftIO m =>
ProcessConfig stdin stdoutIgnored stderrIgnored
-> (Process stdin (STM ByteString) () -> m a) -> m a
withProcessInterleave ProcessConfig stdin stdoutIgnored stderrIgnored
pc ((Process stdin (STM ByteString) () -> IO (ExitCode, ByteString))
 -> IO (ExitCode, ByteString))
-> (Process stdin (STM ByteString) () -> IO (ExitCode, ByteString))
-> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) ()
p ->
    STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a. STM a -> IO a
atomically (STM (ExitCode, ByteString) -> IO (ExitCode, ByteString))
-> STM (ExitCode, ByteString) -> IO (ExitCode, ByteString)
forall a b. (a -> b) -> a -> b
$ (,)
      (ExitCode -> ByteString -> (ExitCode, ByteString))
-> STM ExitCode -> STM (ByteString -> (ExitCode, ByteString))
forall (f :: * -> *) a b. Functor f => (a -> b) -> f a -> f b
<$> Process stdin (STM ByteString) () -> STM ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM Process stdin (STM ByteString) ()
p
      STM (ByteString -> (ExitCode, ByteString))
-> STM ByteString -> STM (ExitCode, ByteString)
forall (f :: * -> *) a b. Applicative f => f (a -> b) -> f a -> f b
<*> Process stdin (STM ByteString) () -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) ()
p

-- | Same as 'readProcessInterleaved', but instead of returning the 'ExitCode',
-- checks it with 'checkExitCode'.
--
-- Exceptions thrown by this function will include stdout.
--
-- @since 0.2.4.0
readProcessInterleaved_
  :: MonadIO m
  => ProcessConfig stdin stdoutIgnored stderrIgnored
  -- ^
  -> m L.ByteString
  -- ^
readProcessInterleaved_ :: ProcessConfig stdin stdoutIgnored stderrIgnored -> m ByteString
readProcessInterleaved_ ProcessConfig stdin stdoutIgnored stderrIgnored
pc =
    IO ByteString -> m ByteString
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO ByteString -> m ByteString) -> IO ByteString -> m ByteString
forall a b. (a -> b) -> a -> b
$
    ProcessConfig stdin stdoutIgnored stderrIgnored
-> (Process stdin (STM ByteString) () -> IO ByteString)
-> IO ByteString
forall (m :: * -> *) stdin stdoutIgnored stderrIgnored a.
MonadUnliftIO m =>
ProcessConfig stdin stdoutIgnored stderrIgnored
-> (Process stdin (STM ByteString) () -> m a) -> m a
withProcessInterleave ProcessConfig stdin stdoutIgnored stderrIgnored
pc ((Process stdin (STM ByteString) () -> IO ByteString)
 -> IO ByteString)
-> (Process stdin (STM ByteString) () -> IO ByteString)
-> IO ByteString
forall a b. (a -> b) -> a -> b
$ \Process stdin (STM ByteString) ()
p -> STM ByteString -> IO ByteString
forall a. STM a -> IO a
atomically (STM ByteString -> IO ByteString)
-> STM ByteString -> IO ByteString
forall a b. (a -> b) -> a -> b
$ do
      ByteString
stdout' <- Process stdin (STM ByteString) () -> STM ByteString
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
getStdout Process stdin (STM ByteString) ()
p
      Process stdin (STM ByteString) () -> STM ()
forall stdin stdout stderr. Process stdin stdout stderr -> STM ()
checkExitCodeSTM Process stdin (STM ByteString) ()
p STM () -> (ExitCodeException -> STM ()) -> STM ()
forall e a. Exception e => STM a -> (e -> STM a) -> STM a
`catchSTM` \ExitCodeException
ece -> ExitCodeException -> STM ()
forall e a. Exception e => e -> STM a
throwSTM ExitCodeException
ece
        { eceStdout :: ByteString
eceStdout = ByteString
stdout'
        }
      ByteString -> STM ByteString
forall (m :: * -> *) a. Monad m => a -> m a
return ByteString
stdout'

-- | Run the given process, wait for it to exit, and returns its
-- 'ExitCode'.
--
-- @since 0.1.0.0
runProcess :: MonadIO m
           => ProcessConfig stdin stdout stderr
           -- ^
           -> m ExitCode
           -- ^
runProcess :: ProcessConfig stdin stdout stderr -> m ExitCode
runProcess ProcessConfig stdin stdout stderr
pc = IO ExitCode -> m ExitCode
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO ExitCode -> m ExitCode) -> IO ExitCode -> m ExitCode
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> IO ExitCode) -> IO ExitCode
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin stdout stderr
pc Process stdin stdout stderr -> IO ExitCode
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ExitCode
waitExitCode

-- | Same as 'runProcess', but instead of returning the
-- 'ExitCode', checks it with 'checkExitCode'.
--
-- @since 0.1.0.0
runProcess_ :: MonadIO m
            => ProcessConfig stdin stdout stderr
            -- ^
            -> m ()
runProcess_ :: ProcessConfig stdin stdout stderr -> m ()
runProcess_ ProcessConfig stdin stdout stderr
pc = IO () -> m ()
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO () -> m ()) -> IO () -> m ()
forall a b. (a -> b) -> a -> b
$ ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> IO ()) -> IO ()
forall (m :: * -> *) stdin stdout stderr a.
MonadUnliftIO m =>
ProcessConfig stdin stdout stderr
-> (Process stdin stdout stderr -> m a) -> m a
withProcess ProcessConfig stdin stdout stderr
pc Process stdin stdout stderr -> IO ()
forall (m :: * -> *) stdin stdout stderr.
MonadIO m =>
Process stdin stdout stderr -> m ()
checkExitCode

-- | Wait for the process to exit and then return its 'ExitCode'.
--
-- @since 0.1.0.0
waitExitCode :: MonadIO m => Process stdin stdout stderr -> m ExitCode
waitExitCode :: Process stdin stdout stderr -> m ExitCode
waitExitCode = IO ExitCode -> m ExitCode
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO ExitCode -> m ExitCode)
-> (Process stdin stdout stderr -> IO ExitCode)
-> Process stdin stdout stderr
-> m ExitCode
forall b c a. (b -> c) -> (a -> b) -> a -> c
. STM ExitCode -> IO ExitCode
forall a. STM a -> IO a
atomically (STM ExitCode -> IO ExitCode)
-> (Process stdin stdout stderr -> STM ExitCode)
-> Process stdin stdout stderr
-> IO ExitCode
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> STM ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM

-- | Same as 'waitExitCode', but in 'STM'.
--
-- @since 0.1.0.0
waitExitCodeSTM :: Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM :: Process stdin stdout stderr -> STM ExitCode
waitExitCodeSTM = TMVar ExitCode -> STM ExitCode
forall a. TMVar a -> STM a
readTMVar (TMVar ExitCode -> STM ExitCode)
-> (Process stdin stdout stderr -> TMVar ExitCode)
-> Process stdin stdout stderr
-> STM ExitCode
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> TMVar ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> TMVar ExitCode
pExitCode

-- | Check if a process has exited and, if so, return its 'ExitCode'.
--
-- @since 0.1.0.0
getExitCode :: MonadIO m => Process stdin stdout stderr -> m (Maybe ExitCode)
getExitCode :: Process stdin stdout stderr -> m (Maybe ExitCode)
getExitCode = IO (Maybe ExitCode) -> m (Maybe ExitCode)
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO (Maybe ExitCode) -> m (Maybe ExitCode))
-> (Process stdin stdout stderr -> IO (Maybe ExitCode))
-> Process stdin stdout stderr
-> m (Maybe ExitCode)
forall b c a. (b -> c) -> (a -> b) -> a -> c
. STM (Maybe ExitCode) -> IO (Maybe ExitCode)
forall a. STM a -> IO a
atomically (STM (Maybe ExitCode) -> IO (Maybe ExitCode))
-> (Process stdin stdout stderr -> STM (Maybe ExitCode))
-> Process stdin stdout stderr
-> IO (Maybe ExitCode)
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> STM (Maybe ExitCode)
forall stdin stdout stderr.
Process stdin stdout stderr -> STM (Maybe ExitCode)
getExitCodeSTM

-- | Same as 'getExitCode', but in 'STM'.
--
-- @since 0.1.0.0
getExitCodeSTM :: Process stdin stdout stderr -> STM (Maybe ExitCode)
getExitCodeSTM :: Process stdin stdout stderr -> STM (Maybe ExitCode)
getExitCodeSTM = TMVar ExitCode -> STM (Maybe ExitCode)
forall a. TMVar a -> STM (Maybe a)
tryReadTMVar (TMVar ExitCode -> STM (Maybe ExitCode))
-> (Process stdin stdout stderr -> TMVar ExitCode)
-> Process stdin stdout stderr
-> STM (Maybe ExitCode)
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> TMVar ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> TMVar ExitCode
pExitCode

-- | Wait for a process to exit, and ensure that it exited
-- successfully. If not, throws an 'ExitCodeException'.
--
-- Exceptions thrown by this function will not include stdout or stderr (This prevents unbounded memory usage from reading them into memory).
-- However, some callers such as 'readProcess_' catch the exception, add the stdout and stderr, and rethrow.
--
-- @since 0.1.0.0
checkExitCode :: MonadIO m => Process stdin stdout stderr -> m ()
checkExitCode :: Process stdin stdout stderr -> m ()
checkExitCode = IO () -> m ()
forall (m :: * -> *) a. MonadIO m => IO a -> m a
liftIO (IO () -> m ())
-> (Process stdin stdout stderr -> IO ())
-> Process stdin stdout stderr
-> m ()
forall b c a. (b -> c) -> (a -> b) -> a -> c
. STM () -> IO ()
forall a. STM a -> IO a
atomically (STM () -> IO ())
-> (Process stdin stdout stderr -> STM ())
-> Process stdin stdout stderr
-> IO ()
forall b c a. (b -> c) -> (a -> b) -> a -> c
. Process stdin stdout stderr -> STM ()
forall stdin stdout stderr. Process stdin stdout stderr -> STM ()
checkExitCodeSTM

-- | Same as 'checkExitCode', but in 'STM'.
--
-- @since 0.1.0.0
checkExitCodeSTM :: Process stdin stdout stderr -> STM ()
checkExitCodeSTM :: Process stdin stdout stderr -> STM ()
checkExitCodeSTM Process stdin stdout stderr
p = do
    ExitCode
ec <- TMVar ExitCode -> STM ExitCode
forall a. TMVar a -> STM a
readTMVar (Process stdin stdout stderr -> TMVar ExitCode
forall stdin stdout stderr.
Process stdin stdout stderr -> TMVar ExitCode
pExitCode Process stdin stdout stderr
p)
    case ExitCode
ec of
        ExitCode
ExitSuccess -> () -> STM ()
forall (m :: * -> *) a. Monad m => a -> m a
return ()
        ExitCode
_ -> ExitCodeException -> STM ()
forall e a. Exception e => e -> STM a
throwSTM ExitCodeException :: ExitCode
-> ProcessConfig () () ()
-> ByteString
-> ByteString
-> ExitCodeException
ExitCodeException
            { eceExitCode :: ExitCode
eceExitCode = ExitCode
ec
            , eceProcessConfig :: ProcessConfig () () ()
eceProcessConfig = ProcessConfig () () () -> ProcessConfig () () ()
forall stdin stdout stderr.
ProcessConfig stdin stdout stderr -> ProcessConfig () () ()
clearStreams (Process stdin stdout stderr -> ProcessConfig () () ()
forall stdin stdout stderr.
Process stdin stdout stderr -> ProcessConfig () () ()
pConfig Process stdin stdout stderr
p)
            , eceStdout :: ByteString
eceStdout = ByteString
L.empty
            , eceStderr :: ByteString
eceStderr = ByteString
L.empty
            }

-- | Internal
clearStreams :: ProcessConfig stdin stdout stderr -> ProcessConfig () () ()
clearStreams :: ProcessConfig stdin stdout stderr -> ProcessConfig () () ()
clearStreams ProcessConfig stdin stdout stderr
pc = ProcessConfig stdin stdout stderr
pc
    { pcStdin :: StreamSpec 'STInput ()
pcStdin = StreamSpec 'STInput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    , pcStdout :: StreamSpec 'STOutput ()
pcStdout = StreamSpec 'STOutput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    , pcStderr :: StreamSpec 'STOutput ()
pcStderr = StreamSpec 'STOutput ()
forall (anyStreamType :: StreamType). StreamSpec anyStreamType ()
inherit
    }

-- | Get the child's standard input stream value.
--
-- @since 0.1.0.0
getStdin :: Process stdin stdout stderr -> stdin
getStdin :: Process stdin stdout stderr -> stdin
getStdin = Process stdin stdout stderr -> stdin
forall stdin stdout stderr. Process stdin stdout stderr -> stdin
pStdin

-- | Get the child's standard output stream value.
--
-- @since 0.1.0.0
getStdout :: Process stdin stdout stderr -> stdout
getStdout :: Process stdin stdout stderr -> stdout
getStdout = Process stdin stdout stderr -> stdout
forall stdin stdout stderr. Process stdin stdout stderr -> stdout
pStdout

-- | Get the child's standard error stream value.
--
-- @since 0.1.0.0
getStderr :: Process stdin stdout stderr -> stderr
getStderr :: Process stdin stdout stderr -> stderr
getStderr = Process stdin stdout stderr -> stderr
forall stdin stdout stderr. Process stdin stdout stderr -> stderr
pStderr

-- | Exception thrown by 'checkExitCode' in the event of a non-success
-- exit code. Note that 'checkExitCode' is called by other functions
-- as well, like 'runProcess_' or 'readProcess_'.
--
-- Note that several functions that throw an 'ExitCodeException' intentionally do not populate 'eceStdout' or 'eceStderr'.
-- This prevents unbounded memory usage for large stdout and stderrs.
--
-- @since 0.1.0.0
data ExitCodeException = ExitCodeException
    { ExitCodeException -> ExitCode
eceExitCode :: ExitCode
    , ExitCodeException -> ProcessConfig () () ()
eceProcessConfig :: ProcessConfig () () ()
    , ExitCodeException -> ByteString
eceStdout :: L.ByteString
    , ExitCodeException -> ByteString
eceStderr :: L.ByteString
    }
    deriving Typeable
instance Exception ExitCodeException
instance Show ExitCodeException where
    show :: ExitCodeException -> FilePath
show ExitCodeException
ece = [FilePath] -> FilePath
forall (t :: * -> *) a. Foldable t => t [a] -> [a]
concat
        [ FilePath
"Received "
        , ExitCode -> FilePath
forall a. Show a => a -> FilePath
show (ExitCodeException -> ExitCode
eceExitCode ExitCodeException
ece)
        , FilePath
" when running\n"
        -- Too much output for an exception if we show the modified
        -- environment, so hide it
        , ProcessConfig () () () -> FilePath
forall a. Show a => a -> FilePath
show (ExitCodeException -> ProcessConfig () () ()
eceProcessConfig ExitCodeException
ece) { pcEnv :: Maybe [(FilePath, FilePath)]
pcEnv = Maybe [(FilePath, FilePath)]
forall a. Maybe a
Nothing }
        , if ByteString -> Bool
L.null (ExitCodeException -> ByteString
eceStdout ExitCodeException
ece)
            then FilePath
""
            else FilePath
"Standard output:\n\n" FilePath -> ShowS
forall a. [a] -> [a] -> [a]
++ ByteString -> FilePath
L8.unpack (ExitCodeException -> ByteString
eceStdout ExitCodeException
ece)
        , if ByteString -> Bool
L.null (ExitCodeException -> ByteString
eceStderr ExitCodeException
ece)
            then FilePath
""
            else FilePath
"Standard error:\n\n" FilePath -> ShowS
forall a. [a] -> [a] -> [a]
++ ByteString -> FilePath
L8.unpack (ExitCodeException -> ByteString
eceStderr ExitCodeException
ece)
        ]

-- | Wrapper for when an exception is thrown when reading from a child
-- process, used by 'byteStringOutput'.
--
-- @since 0.1.0.0
data ByteStringOutputException = ByteStringOutputException SomeException (ProcessConfig () () ())
    deriving (Int -> ByteStringOutputException -> ShowS
[ByteStringOutputException] -> ShowS
ByteStringOutputException -> FilePath
(Int -> ByteStringOutputException -> ShowS)
-> (ByteStringOutputException -> FilePath)
-> ([ByteStringOutputException] -> ShowS)
-> Show ByteStringOutputException
forall a.
(Int -> a -> ShowS) -> (a -> FilePath) -> ([a] -> ShowS) -> Show a
showList :: [ByteStringOutputException] -> ShowS
$cshowList :: [ByteStringOutputException] -> ShowS
show :: ByteStringOutputException -> FilePath
$cshow :: ByteStringOutputException -> FilePath
showsPrec :: Int -> ByteStringOutputException -> ShowS
$cshowsPrec :: Int -> ByteStringOutputException -> ShowS
Show, Typeable)
instance Exception ByteStringOutputException

-- | Take 'System.Process.ProcessHandle' out of the 'Process'.
-- This method is needed in cases one need to use low level functions
-- from the @process@ package. Use cases for this method are:
--
--   1. Send a special signal to the process.
--   2. Terminate the process group instead of terminating single process.
--   3. Use platform specific API on the underlying process.
--
-- This method is considered unsafe because the actions it performs on
-- the underlying process may overlap with the functionality that
-- @typed-process@ provides. For example the user should not call
-- 'System.Process.waitForProcess' on the process handle as eiter
-- 'System.Process.waitForProcess' or 'stopProcess' will lock.
-- Additionally, even if process was terminated by the
-- 'System.Process.terminateProcess' or by sending signal,
-- 'stopProcess' should be called either way in order to cleanup resources
-- allocated by the @typed-process@.
--
-- @since 0.1.1
unsafeProcessHandle :: Process stdin stdout stderr -> P.ProcessHandle
unsafeProcessHandle :: Process stdin stdout stderr -> ProcessHandle
unsafeProcessHandle = Process stdin stdout stderr -> ProcessHandle
forall stdin stdout stderr.
Process stdin stdout stderr -> ProcessHandle
pHandle

bracket :: MonadUnliftIO m => IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket :: IO a -> (a -> IO b) -> (a -> m c) -> m c
bracket IO a
before a -> IO b
after a -> m c
thing = ((forall a. m a -> IO a) -> IO c) -> m c
forall (m :: * -> *) b.
MonadUnliftIO m =>
((forall a. m a -> IO a) -> IO b) -> m b
withRunInIO (((forall a. m a -> IO a) -> IO c) -> m c)
-> ((forall a. m a -> IO a) -> IO c) -> m c
forall a b. (a -> b) -> a -> b
$ \forall a. m a -> IO a
run -> IO a -> (a -> IO b) -> (a -> IO c) -> IO c
forall a b c. IO a -> (a -> IO b) -> (a -> IO c) -> IO c
E.bracket IO a
before a -> IO b
after (m c -> IO c
forall a. m a -> IO a
run (m c -> IO c) -> (a -> m c) -> a -> IO c
forall b c a. (b -> c) -> (a -> b) -> a -> c
. a -> m c
thing)

finally :: MonadUnliftIO m => m a -> IO () -> m a
finally :: m a -> IO () -> m a
finally m a
thing IO ()
after = ((forall a. m a -> IO a) -> IO a) -> m a
forall (m :: * -> *) b.
MonadUnliftIO m =>
((forall a. m a -> IO a) -> IO b) -> m b
withRunInIO (((forall a. m a -> IO a) -> IO a) -> m a)
-> ((forall a. m a -> IO a) -> IO a) -> m a
forall a b. (a -> b) -> a -> b
$ \forall a. m a -> IO a
run -> IO a -> IO () -> IO a
forall a b. IO a -> IO b -> IO a
E.finally (m a -> IO a
forall a. m a -> IO a
run m a
thing) IO ()
after