snap-0.13.3.2: Top-level package for the Snap Web Framework

Safe HaskellNone
LanguageHaskell98

Snap.Snaplet.Heist

Contents

Description

The Heist snaplet makes it easy to add Heist to your application and use it in other snaplets.

Synopsis

Heist and its type class

data Heist b Source

The state for the Heist snaplet. To use the Heist snaplet in your app include this in your application state and use heistInit to initialize it. The type parameter b will typically be the base state type for your application.

class HasHeist b where Source

A single snaplet should never need more than one instance of Heist as a subsnaplet. This type class allows you to make it easy for other snaplets to get the lens that identifies the heist snaplet. Here's an example of how the heist snaplet might be declared:

data App = App { _heist :: Snaplet (Heist App) }
makeLenses ''App

instance HasHeist App where heistLens = subSnaplet heist

appInit = makeSnaplet "app" "" Nothing $ do
    h <- nestSnaplet "heist" heist $ heistInit "templates"
    addConfig h heistConfigWithMyAppSplices
    return $ App h

Methods

heistLens :: SnapletLens (Snaplet b) (Heist b) Source

A lens to the Heist snaplet. The b parameter to Heist will typically be the base state of your application.

Initializer Functions

This section contains functions for use in setting up your Heist state during initialization.

heistInit Source

Arguments

:: FilePath

Path to templates

-> SnapletInit b (Heist b) 

The Initializer for Heist. This function is a convenience wrapper around heistInit' that uses defaultHeistState and sets up routes for all the templates. It sets up a "heistReload" route that reloads the heist templates when you request it from localhost.

heistInit' Source

Arguments

:: FilePath

Path to templates

-> HeistConfig (Handler b b)

Initial HeistConfig

-> SnapletInit b (Heist b) 

A lower level Initializer for Heist. This initializer requires you to specify the initial HeistConfig. It also does not add any routes for templates, allowing you complete control over which templates get routed.

heistReloader :: Handler b (Heist b) () Source

Handler that triggers a template reload. For large sites, this can be desireable because it may be much quicker than the full site reload provided at the adminreload route. This allows you to reload only the heist templates This handler is automatically set up by heistInit, but if you use heistInit', then you can create your own route with it.

setInterpreted :: Snaplet (Heist b) -> Initializer b v () Source

Sets the snaplet to default to interpreted mode. Initially, the initializer sets the value to compiled mode. This function allows you to override that setting. Note that this is just a default. It only has an effect if you use one of the generic functions: gRender, gRenderAs, gHeistServe, or gHeistServeSingle. If you call the non-generic versions directly, then this value will not be checked and you will get the mode implemented by the function you called.

addTemplates Source

Arguments

:: HasHeist b 
=> Snaplet (Heist b) 
-> ByteString

The url prefix for the template routes

-> Initializer b v () 

Adds templates to the Heist HeistState. Other snaplets should use this function to add their own templates. The templates are automatically read from the templates directory in the current snaplet's filesystem root.

addTemplatesAt Source

Arguments

:: HasHeist b 
=> Snaplet (Heist b) 
-> ByteString

URL prefix for template routes

-> FilePath

Path to templates

-> Initializer b v () 

Adds templates to the Heist HeistState, and lets you specify where they are found in the filesystem. Note that the path to the template directory is an absolute path. This allows you more flexibility in where your templates are located, but means that you have to explicitly call getSnapletFilePath if you want your snaplet to use templates within its normal directory structure.

addConfig :: Snaplet (Heist b) -> SpliceConfig (Handler b b) -> Initializer b v () Source

Adds more HeistConfig data using mappend with whatever is currently there. This is the preferred method for adding all four kinds of splices as well as new templates.

getHeistState :: HasHeist b => Handler b v (HeistState (Handler b b)) Source

More general function allowing arbitrary HeistState modification.

modifyHeistState Source

Arguments

:: HasHeist b 
=> (HeistState (Handler b b) -> HeistState (Handler b b))

HeistState modifying function

-> Initializer b v () 

More general function allowing arbitrary HeistState modification.

withHeistState Source

Arguments

:: HasHeist b 
=> (HeistState (Handler b b) -> a)

HeistState function to run

-> Handler b v a 

Runs a function on with the Heist snaplet's HeistState.

Handler Functions

This section contains functions in the Handler monad that you'll use in processing requests. Functions beginning with a g prefix use generic rendering that checks the preferred rendering mode and chooses appropriately. Functions beginning with a c prefix use compiled template rendering. The other functions use the older interpreted rendering. Interpreted splices added with addConfig will only work if you use interpreted rendering.

The generic functions are useful if you are writing general snaplets that use heist, but need to work for applications that use either interpreted or compiled mode.

gRender Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Generic version of 'render'/'cRender'.

gRenderAs Source

Arguments

:: HasHeist b 
=> ByteString

Content type to render with

-> ByteString

Template name

-> Handler b v () 

Generic version of 'renderAs'/'cRenderAs'.

gHeistServe :: HasHeist b => Handler b v () Source

Generic version of 'heistServe'/'cHeistServe'.

gHeistServeSingle Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Generic version of 'heistServeSingle'/'cHeistServeSingle'.

chooseMode Source

Arguments

:: HasHeist b 
=> Handler b v a

A compiled action

-> Handler b v a

An interpreted action

-> Handler b v a 

Chooses between a compiled action and an interpreted action based on the configured default.

cRender Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Renders a compiled template as text/html. If the given template is not found, this returns empty.

cRenderAs Source

Arguments

:: HasHeist b 
=> ByteString

Content type to render with

-> ByteString

Template name

-> Handler b v () 

Renders a compiled template as the given content type. If the given template is not found, this returns empty.

cHeistServe :: HasHeist b => Handler b v () Source

A compiled version of heistServe.

cHeistServeSingle Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Analogous to fileServeSingle. If the given template is not found, this throws an error.

render Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Renders a template as text/html. If the given template is not found, this returns empty.

renderAs Source

Arguments

:: HasHeist b 
=> ByteString

Content type to render with

-> ByteString

Template name

-> Handler b v () 

Renders a template as the given content type. If the given template is not found, this returns empty.

heistServe :: HasHeist b => Handler b v () Source

A handler that serves all the templates (similar to serveDirectory). If the template specified in the request path is not found, it returns empty. Also, this function does not serve any templates beginning with an underscore. This gives you a way to prevent some templates from being served. For example, you might have a template that contains only the navbar of your pages, and you probably wouldn't want that template to be visible to the user as a standalone template. So if you put it in a file called "_nav.tpl", this function won't serve it.

heistServeSingle Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Handler b v () 

Handler for serving a single template (similar to fileServeSingle). If the given template is not found, this throws an error.

heistLocal Source

Arguments

:: HasHeist b 
=> (HeistState (Handler b b) -> HeistState (Handler b b))

HeistState modifying function

-> Handler b v a

Handler to run

-> Handler b v a 

Runs a handler with a modified HeistState. You might want to use this if you had a set of splices which were customised for a specific action. To do that you would do:

heistLocal (bindSplices mySplices) handlerThatNeedsSplices

withSplices Source

Arguments

:: HasHeist b 
=> Splices (SnapletISplice b)

Splices to bind

-> Handler b v a

Handler to run

-> Handler b v a 

Runs an action with additional splices bound into the Heist HeistState.

renderWithSplices Source

Arguments

:: HasHeist b 
=> ByteString

Template name

-> Splices (SnapletISplice b)

Splices to bind

-> Handler b v () 

Renders a template with a given set of splices. This is syntax sugar for a common combination of heistLocal, bindSplices, and render.

Writing Splices

As can be seen in the type signature of heistLocal, the internal HeistState used by the heist snaplet is parameterized by (Handler b b). The reasons for this are beyond the scope of this discussion, but the result is that lift inside a splice only works with Handler b b actions. When you're writing your own snaplets you obviously would rather work with Handler b v so your local snaplet's state is available. We provide the SnapletHeist monad to make this possible. The general rule is that when you're using Snaplets and Heist, use SnapletHeist instead of HeistT (previously called TemplateMonad) and use SnapletISplice instead of Splice.

type SnapletHeist b m a = HeistT (Handler b b) m a Source

clearHeistCache :: Heist b -> IO () Source

Clears data stored by the cache tag. The cache tag automatically reloads its data when the specified TTL expires, but sometimes you may want to trigger a manual reload. This function lets you do that.