map-reduce-fold builder returning a SerialT Identity d result

effectful map-reduce-fold engine returning a (Istream t => t m d) result The MonadAsync constraint here more or less requires us to run in IO, or something IO like.

possibly (depending on chosen stream types) concurrent map-reduce-fold builder returning an (Istream t, MonadAsync m) => t m d result

make a stream into an (effectful) []

mappend all in a monoidal stream

mappend everything in a pure Streamly fold

mappend everything in an effectful Streamly fold.

mappend everything in a concurrent Streamly fold.

Group streamly stream of (k,c) by hashable key. NB: this function uses the fact that SerialT m is a monad

Group streamly stream of (k,c) by ordered key. NB: this function uses the fact that SerialT m is a monad

Group streamly stream of (k,c) by hashable key. Uses mutable hashtables running in the ST monad. NB: this function uses the fact that SerialT m is a monad

Group streamly stream of (k,c) by key with instance of Grouping from http://hackage.haskell.org/package/discrimination. NB: this function uses the fact that SerialT m is a monad

The Semigroup operation for SerialT behaves like a regular append operation. Therefore, when a <> b is evaluated, stream a is evaluated first until it exhausts and then stream b is evaluated. In other words, the elements of stream b are appended to the elements of stream a. This operation can be used to fold an infinite lazy container of streams.

import Streamly
import qualified Streamly.Prelude as S

main = (S.toList . serially $ (S.fromList [1,2]) <> (S.fromList [3,4])) >>= print

[1,2,3,4]

The Monad instance runs the monadic continuation for each element of the stream, serially.

main = S.drain . serially $ do
    x <- return 1 <> return 2
    S.yieldM $ print x

1
2

SerialT nests streams serially in a depth first manner.

main = S.drain . serially $ do
    x <- return 1 <> return 2
    y <- return 3 <> return 4
    S.yieldM $ print (x, y)

(1,3)
(1,4)
(2,3)
(2,4)

We call the monadic code being run for each element of the stream a monadic continuation. In imperative paradigm we can think of this composition as nested for loops and the monadic continuation is the body of the loop. The loop iterates for all elements of the stream.

Note that the behavior and semantics of SerialT, including Semigroup and Monad instances are exactly like Haskell lists except that SerialT can contain effectful actions while lists are pure.

In the code above, the serially combinator can be omitted as the default stream type is SerialT.

Since: streamly-0.2.0

The Semigroup operation for WSerialT interleaves the elements from the two streams. Therefore, when a <> b is evaluated, stream a is evaluated first to produce the first element of the combined stream and then stream b is evaluated to produce the next element of the combined stream, and then we go back to evaluating stream a and so on. In other words, the elements of stream a are interleaved with the elements of stream b.

Note that when multiple actions are combined like a <> b <> c ... <> z we interleave them in a binary fashion i.e. a and b are interleaved with each other and the result is interleaved with c and so on. This will not act as a true round-robin scheduling across all the streams. Note that this operation cannot be used to fold a container of infinite streams as the state that it needs to maintain is proportional to the number of streams.

import Streamly
import qualified Streamly.Prelude as S

main = (S.toList . wSerially $ (S.fromList [1,2]) <> (S.fromList [3,4])) >>= print

[1,3,2,4]

Similarly, the Monad instance interleaves the iterations of the inner and the outer loop, nesting loops in a breadth first manner.

main = S.drain . wSerially $ do
    x <- return 1 <> return 2
    y <- return 3 <> return 4
    S.yieldM $ print (x, y)

(1,3)
(2,3)
(1,4)
(2,4)

Since: streamly-0.2.0

The Semigroup operation for AheadT appends two streams. The combined stream behaves like a single stream with the actions from the second stream appended to the first stream. The combined stream is evaluated in the speculative style. This operation can be used to fold an infinite lazy container of streams.

import Streamly
import qualified Streamly.Prelude as S
import Control.Concurrent

main = do
 xs <- S.toList . aheadly $ (p 1 |: p 2 |: nil) <> (p 3 |: p 4 |: nil)
 print xs
 where p n = threadDelay 1000000 >> return n

[1,2,3,4]

Any exceptions generated by a constituent stream are propagated to the output stream.

The monad instance of AheadT may run each monadic continuation (bind) concurrently in a speculative manner, performing side effects in a partially ordered manner but producing the outputs in an ordered manner like SerialT.

main = S.drain . aheadly $ do
    n <- return 3 <> return 2 <> return 1
    S.yieldM $ do
         threadDelay (n * 1000000)
         myThreadId >>= \tid -> putStrLn (show tid ++ ": Delay " ++ show n)

ThreadId 40: Delay 1
ThreadId 39: Delay 2
ThreadId 38: Delay 3

Since: streamly-0.3.0

The Semigroup operation for AsyncT appends two streams. The combined stream behaves like a single stream with the actions from the second stream appended to the first stream. The combined stream is evaluated in the asynchronous style. This operation can be used to fold an infinite lazy container of streams.

import Streamly
import qualified Streamly.Prelude as S
import Control.Concurrent

main = (S.toList . asyncly $ (S.fromList [1,2]) <> (S.fromList [3,4])) >>= print

[1,2,3,4]

Any exceptions generated by a constituent stream are propagated to the output stream. The output and exceptions from a single stream are guaranteed to arrive in the same order in the resulting stream as they were generated in the input stream. However, the relative ordering of elements from different streams in the resulting stream can vary depending on scheduling and generation delays.

Similarly, the monad instance of AsyncT may run each iteration concurrently based on demand. More concurrent iterations are started only if the previous iterations are not able to produce enough output for the consumer.

main = drain . asyncly $ do
    n <- return 3 <> return 2 <> return 1
    S.yieldM $ do
         threadDelay (n * 1000000)
         myThreadId >>= \tid -> putStrLn (show tid ++ ": Delay " ++ show n)

ThreadId 40: Delay 1
ThreadId 39: Delay 2
ThreadId 38: Delay 3

Since: streamly-0.1.0

The Semigroup operation for WAsyncT interleaves the elements from the two streams. Therefore, when a <> b is evaluated, one action is picked from stream a for evaluation and then the next action is picked from stream b and then the next action is again picked from stream a, going around in a round-robin fashion. Many such actions are executed concurrently depending on maxThreads and maxBuffer limits. Results are served to the consumer in the order completion of the actions.

Note that when multiple actions are combined like a <> b <> c ... <> z we go in a round-robin fasion across all of them picking one action from each up to z and then come back to a. Note that this operation cannot be used to fold a container of infinite streams as the state that it needs to maintain is proportional to the number of streams.

import Streamly
import qualified Streamly.Prelude as S
import Control.Concurrent

main = (S.toList . wAsyncly $ (S.fromList [1,2]) <> (S.fromList [3,4])) >>= print

[1,3,2,4]

Any exceptions generated by a constituent stream are propagated to the output stream. The output and exceptions from a single stream are guaranteed to arrive in the same order in the resulting stream as they were generated in the input stream. However, the relative ordering of elements from different streams in the resulting stream can vary depending on scheduling and generation delays.

Similarly, the Monad instance of WAsyncT runs all iterations fairly concurrently using a round robin scheduling.

main = drain . wAsyncly $ do
    n <- return 3 <> return 2 <> return 1
    S.yieldM $ do
         threadDelay (n * 1000000)
         myThreadId >>= \tid -> putStrLn (show tid ++ ": Delay " ++ show n)

ThreadId 40: Delay 1
ThreadId 39: Delay 2
ThreadId 38: Delay 3

Since: streamly-0.2.0

Async composition with strict concurrent execution of all streams.

The Semigroup instance of ParallelT executes both the streams concurrently without any delay or without waiting for the consumer demand and merges the results as they arrive. If the consumer does not consume the results, they are buffered upto a configured maximum, controlled by the maxBuffer primitive. If the buffer becomes full the concurrent tasks will block until there is space in the buffer.

Both WAsyncT and ParallelT, evaluate the constituent streams fairly in a round robin fashion. The key difference is that WAsyncT might wait for the consumer demand before it executes the tasks whereas ParallelT starts executing all the tasks immediately without waiting for the consumer demand. For WAsyncT the maxThreads limit applies whereas for ParallelT it does not apply. In other words, WAsyncT can be lazy whereas ParallelT is strict.

ParallelT is useful for cases when the streams are required to be evaluated simultaneously irrespective of how the consumer consumes them e.g. when we want to race two tasks and want to start both strictly at the same time or if we have timers in the parallel tasks and our results depend on the timers being started at the same time. If we do not have such requirements then AsyncT or AheadT are recommended as they can be more efficient than ParallelT.

main = (toList . parallely $ (fromFoldable [1,2]) <> (fromFoldable [3,4])) >>= print

[1,3,2,4]

When streams with more than one element are merged, it yields whichever stream yields first without any bias, unlike the Async style streams.

Any exceptions generated by a constituent stream are propagated to the output stream. The output and exceptions from a single stream are guaranteed to arrive in the same order in the resulting stream as they were generated in the input stream. However, the relative ordering of elements from different streams in the resulting stream can vary depending on scheduling and generation delays.

Similarly, the Monad instance of ParallelT runs all iterations of the loop concurrently.

import Streamly
import qualified Streamly.Prelude as S
import Control.Concurrent

main = drain . parallely $ do
    n <- return 3 <> return 2 <> return 1
    S.yieldM $ do
         threadDelay (n * 1000000)
         myThreadId >>= \tid -> putStrLn (show tid ++ ": Delay " ++ show n)

ThreadId 40: Delay 1
ThreadId 39: Delay 2
ThreadId 38: Delay 3

Note that parallel composition can only combine a finite number of streams as it needs to retain state for each unfinished stream.

Since: 0.7.0 (maxBuffer applies to ParallelT streams)

Since: 0.1.0

A monad that can perform concurrent or parallel IO operations. Streams that can be composed concurrently require the underlying monad to be MonadAsync.

Since: streamly-0.1.0

Class of types that can represent a stream of elements of some type a in some monad m.

Since: streamly-0.2.0