gi-glib-2.0.17: GLib bindings

CopyrightWill Thompson Iñaki García Etxebarria and Jonas Platte
LicenseLGPL-2.1
MaintainerIñaki García Etxebarria (garetxe@gmail.com)
Safe HaskellNone
LanguageHaskell2010

GI.GLib.Structs.ScannerConfig

Contents

Description

Specifies the Scanner parser configuration. Most settings can be changed during the parsing phase and will affect the lexical parsing of the next unpeeked token.

Synopsis

Exported types

newZeroScannerConfig :: MonadIO m => m ScannerConfig Source #

Construct a ScannerConfig struct initialized to zero.

Properties

caseSensitive

specifies if symbols are case sensitive (the default is False).

getScannerConfigCaseSensitive :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “case_sensitive” field. When overloading is enabled, this is equivalent to

get scannerConfig #caseSensitive

setScannerConfigCaseSensitive :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “case_sensitive” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #caseSensitive := value ]

char2Token

specifies if characters are reported by setting token = ch or as TokenTypeChar (the default is True).

getScannerConfigChar2Token :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “char_2_token” field. When overloading is enabled, this is equivalent to

get scannerConfig #char2Token

setScannerConfigChar2Token :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “char_2_token” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #char2Token := value ]

cpairCommentSingle

specifies the characters at the start and end of single-line comments. The default is "#\n" which means that single-line comments start with a '#' and continue until a '\n' (end of line).

clearScannerConfigCpairCommentSingle :: MonadIO m => ScannerConfig -> m () Source #

Set the value of the “cpair_comment_single” field to Nothing. When overloading is enabled, this is equivalent to

clear #cpairCommentSingle

getScannerConfigCpairCommentSingle :: MonadIO m => ScannerConfig -> m (Maybe Text) Source #

Get the value of the “cpair_comment_single” field. When overloading is enabled, this is equivalent to

get scannerConfig #cpairCommentSingle

setScannerConfigCpairCommentSingle :: MonadIO m => ScannerConfig -> CString -> m () Source #

Set the value of the “cpair_comment_single” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #cpairCommentSingle := value ]

csetIdentifierFirst

specifies the characters which can start identifiers (the default is CSET_a_2_z, "_", and CSET_A_2_Z).

clearScannerConfigCsetIdentifierFirst :: MonadIO m => ScannerConfig -> m () Source #

Set the value of the “cset_identifier_first” field to Nothing. When overloading is enabled, this is equivalent to

clear #csetIdentifierFirst

getScannerConfigCsetIdentifierFirst :: MonadIO m => ScannerConfig -> m (Maybe Text) Source #

Get the value of the “cset_identifier_first” field. When overloading is enabled, this is equivalent to

get scannerConfig #csetIdentifierFirst

setScannerConfigCsetIdentifierFirst :: MonadIO m => ScannerConfig -> CString -> m () Source #

Set the value of the “cset_identifier_first” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #csetIdentifierFirst := value ]

csetIdentifierNth

specifies the characters which can be used in identifiers, after the first character (the default is CSET_a_2_z, "_0123456789", CSET_A_2_Z, G_CSET_LATINS, G_CSET_LATINC).

clearScannerConfigCsetIdentifierNth :: MonadIO m => ScannerConfig -> m () Source #

Set the value of the “cset_identifier_nth” field to Nothing. When overloading is enabled, this is equivalent to

clear #csetIdentifierNth

getScannerConfigCsetIdentifierNth :: MonadIO m => ScannerConfig -> m (Maybe Text) Source #

Get the value of the “cset_identifier_nth” field. When overloading is enabled, this is equivalent to

get scannerConfig #csetIdentifierNth

setScannerConfigCsetIdentifierNth :: MonadIO m => ScannerConfig -> CString -> m () Source #

Set the value of the “cset_identifier_nth” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #csetIdentifierNth := value ]

csetSkipCharacters

specifies which characters should be skipped by the scanner (the default is the whitespace characters: space, tab, carriage-return and line-feed).

clearScannerConfigCsetSkipCharacters :: MonadIO m => ScannerConfig -> m () Source #

Set the value of the “cset_skip_characters” field to Nothing. When overloading is enabled, this is equivalent to

clear #csetSkipCharacters

getScannerConfigCsetSkipCharacters :: MonadIO m => ScannerConfig -> m (Maybe Text) Source #

Get the value of the “cset_skip_characters” field. When overloading is enabled, this is equivalent to

get scannerConfig #csetSkipCharacters

setScannerConfigCsetSkipCharacters :: MonadIO m => ScannerConfig -> CString -> m () Source #

Set the value of the “cset_skip_characters” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #csetSkipCharacters := value ]

identifier2String

specifies if identifiers are reported as strings (the default is False).

getScannerConfigIdentifier2String :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “identifier_2_string” field. When overloading is enabled, this is equivalent to

get scannerConfig #identifier2String

setScannerConfigIdentifier2String :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “identifier_2_string” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #identifier2String := value ]

int2Float

specifies if all numbers are reported as TokenTypeFloat (the default is False).

getScannerConfigInt2Float :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “int_2_float” field. When overloading is enabled, this is equivalent to

get scannerConfig #int2Float

setScannerConfigInt2Float :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “int_2_float” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #int2Float := value ]

numbers2Int

specifies if binary, octal and hexadecimal numbers are reported as G_TOKEN_INT (the default is True).

getScannerConfigNumbers2Int :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “numbers_2_int” field. When overloading is enabled, this is equivalent to

get scannerConfig #numbers2Int

setScannerConfigNumbers2Int :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “numbers_2_int” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #numbers2Int := value ]

scanBinary

specifies if binary numbers are recognized (the default is False).

getScannerConfigScanBinary :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_binary” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanBinary

setScannerConfigScanBinary :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_binary” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanBinary := value ]

scanCommentMulti

specifies if multi-line comments are recognized (the default is True).

getScannerConfigScanCommentMulti :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_comment_multi” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanCommentMulti

setScannerConfigScanCommentMulti :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_comment_multi” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanCommentMulti := value ]

scanFloat

specifies if floating point numbers are recognized (the default is True).

getScannerConfigScanFloat :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_float” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanFloat

setScannerConfigScanFloat :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_float” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanFloat := value ]

scanHex

specifies if hexadecimal numbers are recognized (the default is True).

getScannerConfigScanHex :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_hex” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanHex

setScannerConfigScanHex :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_hex” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanHex := value ]

scanHexDollar

specifies if '$' is recognized as a prefix for hexadecimal numbers (the default is False).

getScannerConfigScanHexDollar :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_hex_dollar” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanHexDollar

setScannerConfigScanHexDollar :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_hex_dollar” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanHexDollar := value ]

scanIdentifier

specifies if identifiers are recognized (the default is True).

getScannerConfigScanIdentifier :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_identifier” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanIdentifier

setScannerConfigScanIdentifier :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_identifier” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanIdentifier := value ]

scanIdentifier1char

specifies if single-character identifiers are recognized (the default is False).

getScannerConfigScanIdentifier1char :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_identifier_1char” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanIdentifier1char

setScannerConfigScanIdentifier1char :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_identifier_1char” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanIdentifier1char := value ]

scanIdentifierNULL

specifies if Nothing is reported as TokenTypeIdentifierNull (the default is False).

getScannerConfigScanIdentifierNULL :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_identifier_NULL” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanIdentifierNULL

setScannerConfigScanIdentifierNULL :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_identifier_NULL” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanIdentifierNULL := value ]

scanOctal

specifies if octal numbers are recognized (the default is True).

getScannerConfigScanOctal :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_octal” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanOctal

setScannerConfigScanOctal :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_octal” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanOctal := value ]

scanStringDq

specifies if strings can be enclosed in double quotes (the default is True).

getScannerConfigScanStringDq :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_string_dq” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanStringDq

setScannerConfigScanStringDq :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_string_dq” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanStringDq := value ]

scanStringSq

specifies if strings can be enclosed in single quotes (the default is True).

getScannerConfigScanStringSq :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_string_sq” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanStringSq

setScannerConfigScanStringSq :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_string_sq” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanStringSq := value ]

scanSymbols

specifies if symbols are recognized (the default is True).

getScannerConfigScanSymbols :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scan_symbols” field. When overloading is enabled, this is equivalent to

get scannerConfig #scanSymbols

setScannerConfigScanSymbols :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scan_symbols” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scanSymbols := value ]

scope0Fallback

specifies if a symbol is searched for in the default scope in addition to the current scope (the default is False).

getScannerConfigScope0Fallback :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “scope_0_fallback” field. When overloading is enabled, this is equivalent to

get scannerConfig #scope0Fallback

setScannerConfigScope0Fallback :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “scope_0_fallback” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #scope0Fallback := value ]

skipCommentMulti

specifies if multi-line comments are skipped and not returned as tokens (the default is True).

getScannerConfigSkipCommentMulti :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “skip_comment_multi” field. When overloading is enabled, this is equivalent to

get scannerConfig #skipCommentMulti

setScannerConfigSkipCommentMulti :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “skip_comment_multi” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #skipCommentMulti := value ]

skipCommentSingle

specifies if single-line comments are skipped and not returned as tokens (the default is True).

getScannerConfigSkipCommentSingle :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “skip_comment_single” field. When overloading is enabled, this is equivalent to

get scannerConfig #skipCommentSingle

setScannerConfigSkipCommentSingle :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “skip_comment_single” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #skipCommentSingle := value ]

storeInt64

use value.v_int64 rather than v_int

getScannerConfigStoreInt64 :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “store_int64” field. When overloading is enabled, this is equivalent to

get scannerConfig #storeInt64

setScannerConfigStoreInt64 :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “store_int64” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #storeInt64 := value ]

symbol2Token

specifies if symbols are reported by setting token = v_symbol or as TokenTypeSymbol (the default is False).

getScannerConfigSymbol2Token :: MonadIO m => ScannerConfig -> m Word32 Source #

Get the value of the “symbol_2_token” field. When overloading is enabled, this is equivalent to

get scannerConfig #symbol2Token

setScannerConfigSymbol2Token :: MonadIO m => ScannerConfig -> Word32 -> m () Source #

Set the value of the “symbol_2_token” field. When overloading is enabled, this is equivalent to

set scannerConfig [ #symbol2Token := value ]