Commonly used windows string as UTF16 bytes.

Filepaths are UTF16 data on windows as passed to syscalls.

Convert a String.

On windows this encodes as UTF16, which is a pretty good guess. On unix this encodes as UTF8, which is a good guess.

Throws a EncodingException if encoding fails.

Like toPlatformStringUtf, except allows to provide an encoding.

Like toPlatformStringUtf, except on unix this uses the current filesystem locale for encoding instead of always UTF8.

Looking up the locale requires IO. If you're not worried about calls to setFileSystemEncoding, then unsafePerformIO may be feasible (make sure to deeply evaluate the result to catch exceptions).

Throws a EncodingException if encoding fails.

QuasiQuote a WindowsString. This accepts Unicode characters and encodes as UTF-16 on windows.

Pack a list of platform words to a platform string.

Note that using this in conjunction with unsafeFromChar to convert from [Char] to platform string is probably not what you want, because it will truncate unicode code points.

Partial unicode friendly decoding.

On windows this decodes as UTF16-LE (which is the expected filename encoding). On unix this decodes as UTF8 (which is a good guess). Note that filenames on unix are encoding agnostic char arrays.

Throws a EncodingException if decoding fails.

Like fromPlatformStringUtf, except allows to provide a text encoding.

The String is forced into memory to catch all exceptions.

Like fromPlatformStringUt, except on unix this uses the current filesystem locale for decoding instead of always UTF8. On windows, uses UTF-16LE.

Looking up the locale requires IO. If you're not worried about calls to setFileSystemEncoding, then unsafePerformIO may be feasible (make sure to deeply evaluate the result to catch exceptions).

Throws EncodingException if decoding fails.

Unpack a platform string to a list of platform words.

Truncates to 2 octets.

Converts back to a unicode codepoint (total).

The character that separates directories. In the case where more than one character is possible, pathSeparator is the 'ideal' one.

Windows: pathSeparator == '\\'
Posix:   pathSeparator ==  '/'
isPathSeparator pathSeparator

The list of all possible separators.

Windows: pathSeparators == ['\\', '/']
Posix:   pathSeparators == ['/']
pathSeparator `elem` pathSeparators

Rather than using (== pathSeparator), use this. Test if something is a path separator.

isPathSeparator a == (a `elem` pathSeparators)

Is the character a file separator?

isSearchPathSeparator a == (a == searchPathSeparator)

Is the character a file separator?

isSearchPathSeparator a == (a == searchPathSeparator)

File extension character

extSeparator == '.'

Is the character an extension character?

isExtSeparator a == (a == extSeparator)

Take a string, split it on the searchPathSeparator character. Blank items are ignored on Windows, and converted to . on Posix. On Windows path elements are stripped of quotes.

Follows the recommendations in http://www.opengroup.org/onlinepubs/009695399/basedefs/xbd_chap08.html

Posix:   splitSearchPath "File1:File2:File3"  == ["File1","File2","File3"]
Posix:   splitSearchPath "File1::File2:File3" == ["File1",".","File2","File3"]
Windows: splitSearchPath "File1;File2;File3"  == ["File1","File2","File3"]
Windows: splitSearchPath "File1;;File2;File3" == ["File1","File2","File3"]
Windows: splitSearchPath "File1;\"File2\";File3" == ["File1","File2","File3"]

Split on the extension. addExtension is the inverse.

splitExtension "/directory/path.ext" == ("/directory/path",".ext")
uncurry (<>) (splitExtension x) == x
Valid x => uncurry addExtension (splitExtension x) == x
splitExtension "file.txt" == ("file",".txt")
splitExtension "file" == ("file","")
splitExtension "file/file.txt" == ("file/file",".txt")
splitExtension "file.txt/boris" == ("file.txt/boris","")
splitExtension "file.txt/boris.ext" == ("file.txt/boris",".ext")
splitExtension "file/path.txt.bob.fred" == ("file/path.txt.bob",".fred")
splitExtension "file/path.txt/" == ("file/path.txt/","")

Get the extension of a file, returns "" for no extension, .ext otherwise.

takeExtension "/directory/path.ext" == ".ext"
takeExtension x == snd (splitExtension x)
Valid x => takeExtension (addExtension x "ext") == ".ext"
Valid x => takeExtension (replaceExtension x "ext") == ".ext"

Set the extension of a file, overwriting one if already present, equivalent to -<.>.

replaceExtension "/directory/path.txt" "ext" == "/directory/path.ext"
replaceExtension "/directory/path.txt" ".ext" == "/directory/path.ext"
replaceExtension "file.txt" ".bob" == "file.bob"
replaceExtension "file.txt" "bob" == "file.bob"
replaceExtension "file" ".bob" == "file.bob"
replaceExtension "file.txt" "" == "file"
replaceExtension "file.fred.bob" "txt" == "file.fred.txt"
replaceExtension x y == addExtension (dropExtension x) y

Remove the current extension and add another, equivalent to replaceExtension.

"/directory/path.txt" -<.> "ext" == "/directory/path.ext"
"/directory/path.txt" -<.> ".ext" == "/directory/path.ext"
"foo.o" -<.> "c" == "foo.c"

Remove last extension, and the "." preceding it.

dropExtension "/directory/path.ext" == "/directory/path"
dropExtension x == fst (splitExtension x)

Add an extension, even if there is already one there, equivalent to <.>.

addExtension "/directory/path" "ext" == "/directory/path.ext"
addExtension "file.txt" "bib" == "file.txt.bib"
addExtension "file." ".bib" == "file..bib"
addExtension "file" ".bib" == "file.bib"
addExtension "/" "x" == "/.x"
addExtension x "" == x
Valid x => takeFileName (addExtension (addTrailingPathSeparator x) "ext") == ".ext"
Windows: addExtension "\\\\share" ".txt" == "\\\\share\\.txt"

Does the given filename have an extension?

hasExtension "/directory/path.ext" == True
hasExtension "/directory/path" == False
null (takeExtension x) == not (hasExtension x)

Add an extension, even if there is already one there, equivalent to addExtension.

"/directory/path" <.> "ext" == "/directory/path.ext"
"/directory/path" <.> ".ext" == "/directory/path.ext"

Split on all extensions.

splitExtensions "/directory/path.ext" == ("/directory/path",".ext")
splitExtensions "file.tar.gz" == ("file",".tar.gz")
uncurry (<>) (splitExtensions x) == x
Valid x => uncurry addExtension (splitExtensions x) == x
splitExtensions "file.tar.gz" == ("file",".tar.gz")

Drop all extensions.

dropExtensions "/directory/path.ext" == "/directory/path"
dropExtensions "file.tar.gz" == "file"
not $ hasExtension $ dropExtensions x
not $ any isExtSeparator $ takeFileName $ dropExtensions x

Get all extensions.

takeExtensions "/directory/path.ext" == ".ext"
takeExtensions "file.tar.gz" == ".tar.gz"

Replace all extensions of a file with a new extension. Note that replaceExtension and addExtension both work for adding multiple extensions, so only required when you need to drop all extensions first.

replaceExtensions "file.fred.bob" "txt" == "file.txt"
replaceExtensions "file.fred.bob" "tar.gz" == "file.tar.gz"

Does the given filename have the specified extension?

"png" `isExtensionOf` "/directory/file.png" == True
".png" `isExtensionOf` "/directory/file.png" == True
".tar.gz" `isExtensionOf` "bar/foo.tar.gz" == True
"ar.gz" `isExtensionOf` "bar/foo.tar.gz" == False
"png" `isExtensionOf` "/directory/file.png.jpg" == False
"csv/table.csv" `isExtensionOf` "/data/csv/table.csv" == False

Drop the given extension from a filepath, and the "." preceding it. Returns Nothing if the filepath does not have the given extension, or Just and the part before the extension if it does.

This function can be more predictable than dropExtensions, especially if the filename might itself contain . characters.

stripExtension "hs.o" "foo.x.hs.o" == Just "foo.x"
stripExtension "hi.o" "foo.x.hs.o" == Nothing
dropExtension x == fromJust (stripExtension (takeExtension x) x)
dropExtensions x == fromJust (stripExtension (takeExtensions x) x)
stripExtension ".c.d" "a.b.c.d"  == Just "a.b"
stripExtension ".c.d" "a.b..c.d" == Just "a.b."
stripExtension "baz"  "foo.bar"  == Nothing
stripExtension "bar"  "foobar"   == Nothing
stripExtension ""     x          == Just x

Split a filename into directory and file. </> is the inverse. The first component will often end with a trailing slash.

splitFileName "/directory/file.ext" == ("/directory/","file.ext")
Valid x => uncurry (</>) (splitFileName x) == x || fst (splitFileName x) == "./"
Valid x => isValid (fst (splitFileName x))
splitFileName "file/bob.txt" == ("file/", "bob.txt")
splitFileName "file/" == ("file/", "")
splitFileName "bob" == ("./", "bob")
Posix:   splitFileName "/" == ("/","")
Windows: splitFileName "c:" == ("c:","")

Get the file name.

takeFileName "/directory/file.ext" == "file.ext"
takeFileName "test/" == ""
takeFileName x `isSuffixOf` x
takeFileName x == snd (splitFileName x)
Valid x => takeFileName (replaceFileName x "fred") == "fred"
Valid x => takeFileName (x </> "fred") == "fred"
Valid x => isRelative (takeFileName x)

Set the filename.

replaceFileName "/directory/other.txt" "file.ext" == "/directory/file.ext"
Valid x => replaceFileName x (takeFileName x) == x

Drop the filename. Unlike takeDirectory, this function will leave a trailing path separator on the directory.

dropFileName "/directory/file.ext" == "/directory/"
dropFileName x == fst (splitFileName x)

Get the base name, without an extension or path.

takeBaseName "/directory/file.ext" == "file"
takeBaseName "file/test.txt" == "test"
takeBaseName "dave.ext" == "dave"
takeBaseName "" == ""
takeBaseName "test" == "test"
takeBaseName (addTrailingPathSeparator x) == ""
takeBaseName "file/file.tar.gz" == "file.tar"

Set the base name.

replaceBaseName "/directory/other.ext" "file" == "/directory/file.ext"
replaceBaseName "file/test.txt" "bob" == "file/bob.txt"
replaceBaseName "fred" "bill" == "bill"
replaceBaseName "/dave/fred/bob.gz.tar" "new" == "/dave/fred/new.tar"
Valid x => replaceBaseName x (takeBaseName x) == x

Get the directory name, move up one level.

          takeDirectory "/directory/other.ext" == "/directory"
          takeDirectory x `isPrefixOf` x || takeDirectory x == "."
          takeDirectory "foo" == "."
          takeDirectory "/" == "/"
          takeDirectory "/foo" == "/"
          takeDirectory "/foo/bar/baz" == "/foo/bar"
          takeDirectory "/foo/bar/baz/" == "/foo/bar/baz"
          takeDirectory "foo/bar/baz" == "foo/bar"
Windows:  takeDirectory "foo\\bar" == "foo"
Windows:  takeDirectory "foo\\bar\\\\" == "foo\\bar"
Windows:  takeDirectory "C:\\" == "C:\\"

Set the directory, keeping the filename the same.

replaceDirectory "root/file.ext" "/directory/" == "/directory/file.ext"
Valid x => replaceDirectory x (takeDirectory x) `equalFilePath` x

An alias for </>.

Combine two paths with a path separator. If the second path starts with a path separator or a drive letter, then it returns the second. The intention is that readFile (dir </> file) will access the same file as setCurrentDirectory dir; readFile file.

Posix:   "/directory" </> "file.ext" == "/directory/file.ext"
Windows: "/directory" </> "file.ext" == "/directory\\file.ext"
         "directory" </> "/file.ext" == "/file.ext"
Valid x => (takeDirectory x </> takeFileName x) `equalFilePath` x

Combined:

Posix:   "/" </> "test" == "/test"
Posix:   "home" </> "bob" == "home/bob"
Posix:   "x:" </> "foo" == "x:/foo"
Windows: "C:\\foo" </> "bar" == "C:\\foo\\bar"
Windows: "home" </> "bob" == "home\\bob"

Not combined:

Posix:   "home" </> "/bob" == "/bob"
Windows: "home" </> "C:\\bob" == "C:\\bob"

Not combined (tricky):

On Windows, if a filepath starts with a single slash, it is relative to the root of the current drive. In [1], this is (confusingly) referred to as an absolute path. The current behavior of </> is to never combine these forms.

Windows: "home" </> "/bob" == "/bob"
Windows: "home" </> "\\bob" == "\\bob"
Windows: "C:\\home" </> "\\bob" == "\\bob"

On Windows, from [1]: "If a file name begins with only a disk designator but not the backslash after the colon, it is interpreted as a relative path to the current directory on the drive with the specified letter." The current behavior of </> is to never combine these forms.

Windows: "D:\\foo" </> "C:bar" == "C:bar"
Windows: "C:\\foo" </> "C:bar" == "C:bar"

Split a path by the directory separator.

splitPath "/directory/file.ext" == ["/","directory/","file.ext"]
concat (splitPath x) == x
splitPath "test//item/" == ["test//","item/"]
splitPath "test/item/file" == ["test/","item/","file"]
splitPath "" == []
Windows: splitPath "c:\\test\\path" == ["c:\\","test\\","path"]
Posix:   splitPath "/file/test" == ["/","file/","test"]

Join path elements back together.

joinPath z == foldr (</>) "" z
joinPath ["/","directory/","file.ext"] == "/directory/file.ext"
Valid x => joinPath (splitPath x) == x
joinPath [] == ""
Posix: joinPath ["test","file","path"] == "test/file/path"

Just as splitPath, but don't add the trailing slashes to each element.

         splitDirectories "/directory/file.ext" == ["/","directory","file.ext"]
         splitDirectories "test/file" == ["test","file"]
         splitDirectories "/test/file" == ["/","test","file"]
Windows: splitDirectories "C:\\test\\file" == ["C:\\", "test", "file"]
         Valid x => joinPath (splitDirectories x) `equalFilePath` x
         splitDirectories "" == []
Windows: splitDirectories "C:\\test\\\\\\file" == ["C:\\", "test", "file"]
         splitDirectories "/test///file" == ["/","test","file"]

Split a path into a drive and a path. On Posix, / is a Drive.

uncurry (<>) (splitDrive x) == x
Windows: splitDrive "file" == ("","file")
Windows: splitDrive "c:/file" == ("c:/","file")
Windows: splitDrive "c:\\file" == ("c:\\","file")
Windows: splitDrive "\\\\shared\\test" == ("\\\\shared\\","test")
Windows: splitDrive "\\\\shared" == ("\\\\shared","")
Windows: splitDrive "\\\\?\\UNC\\shared\\file" == ("\\\\?\\UNC\\shared\\","file")
Windows: splitDrive "\\\\?\\UNCshared\\file" == ("\\\\?\\","UNCshared\\file")
Windows: splitDrive "\\\\?\\d:\\file" == ("\\\\?\\d:\\","file")
Windows: splitDrive "/d" == ("","/d")
Posix:   splitDrive "/test" == ("/","test")
Posix:   splitDrive "//test" == ("//","test")
Posix:   splitDrive "test/file" == ("","test/file")
Posix:   splitDrive "file" == ("","file")

Join a drive and the rest of the path.

Valid x => uncurry joinDrive (splitDrive x) == x
Windows: joinDrive "C:" "foo" == "C:foo"
Windows: joinDrive "C:\\" "bar" == "C:\\bar"
Windows: joinDrive "\\\\share" "foo" == "\\\\share\\foo"
Windows: joinDrive "/:" "foo" == "/:\\foo"

Get the drive from a filepath.

takeDrive x == fst (splitDrive x)

Does a path have a drive.

not (hasDrive x) == null (takeDrive x)
Posix:   hasDrive "/foo" == True
Windows: hasDrive "C:\\foo" == True
Windows: hasDrive "C:foo" == True
         hasDrive "foo" == False
         hasDrive "" == False

Delete the drive, if it exists.

dropDrive x == snd (splitDrive x)

Is an element a drive

Posix:   isDrive "/" == True
Posix:   isDrive "/foo" == False
Windows: isDrive "C:\\" == True
Windows: isDrive "C:\\foo" == False
         isDrive "" == False

Is an item either a directory or the last character a path separator?

hasTrailingPathSeparator "test" == False
hasTrailingPathSeparator "test/" == True

Add a trailing file path separator if one is not already present.

hasTrailingPathSeparator (addTrailingPathSeparator x)
hasTrailingPathSeparator x ==> addTrailingPathSeparator x == x
Posix:    addTrailingPathSeparator "test/rest" == "test/rest/"

Remove any trailing path separators

dropTrailingPathSeparator "file/test/" == "file/test"
          dropTrailingPathSeparator "/" == "/"
Windows:  dropTrailingPathSeparator "\\" == "\\"
Posix:    not (hasTrailingPathSeparator (dropTrailingPathSeparator x)) || isDrive x

Normalise a file

• // outside of the drive can be made blank
• / -> pathSeparator
• ./ -> ""

Does not remove "..", because of symlinks.

Posix:   normalise "/file/\\test////" == "/file/\\test/"
Posix:   normalise "/file/./test" == "/file/test"
Posix:   normalise "/test/file/../bob/fred/" == "/test/file/../bob/fred/"
Posix:   normalise "../bob/fred/" == "../bob/fred/"
Posix:   normalise "/a/../c" == "/a/../c"
Posix:   normalise "./bob/fred/" == "bob/fred/"
Windows: normalise "c:\\file/bob\\" == "C:\\file\\bob\\"
Windows: normalise "c:\\" == "C:\\"
Windows: normalise "C:.\\" == "C:"
Windows: normalise "\\\\server\\test" == "\\\\server\\test"
Windows: normalise "//server/test" == "\\\\server\\test"
Windows: normalise "c:/file" == "C:\\file"
Windows: normalise "/file" == "\\file"
Windows: normalise "\\" == "\\"
Windows: normalise "/./" == "\\"
         normalise "." == "."
Posix:   normalise "./" == "./"
Posix:   normalise "./." == "./"
Posix:   normalise "/./" == "/"
Posix:   normalise "/" == "/"
Posix:   normalise "bob/fred/." == "bob/fred/"
Posix:   normalise "//home" == "/home"

Equality of two filepaths. If you call System.Directory.canonicalizePath first this has a much better chance of working. Note that this doesn't follow symlinks or DOSNAM~1s.

Similar to normalise, this does not expand "..", because of symlinks.

         x == y ==> equalFilePath x y
         normalise x == normalise y ==> equalFilePath x y
         equalFilePath "foo" "foo/"
         not (equalFilePath "/a/../c" "/c")
         not (equalFilePath "foo" "/foo")
Posix:   not (equalFilePath "foo" "FOO")
Windows: equalFilePath "foo" "FOO"
Windows: not (equalFilePath "C:" "C:/")

Contract a filename, based on a relative path. Note that the resulting path will never introduce .. paths, as the presence of symlinks means ../b may not reach a/b if it starts from a/c. For a worked example see this blog post.

The corresponding makeAbsolute function can be found in System.Directory.

         makeRelative "/directory" "/directory/file.ext" == "file.ext"
         Valid x => makeRelative (takeDirectory x) x `equalFilePath` takeFileName x
         makeRelative x x == "."
         Valid x y => equalFilePath x y || (isRelative x && makeRelative y x == x) || equalFilePath (y </> makeRelative y x) x
Windows: makeRelative "C:\\Home" "c:\\home\\bob" == "bob"
Windows: makeRelative "C:\\Home" "c:/home/bob" == "bob"
Windows: makeRelative "C:\\Home" "D:\\Home\\Bob" == "D:\\Home\\Bob"
Windows: makeRelative "C:\\Home" "C:Home\\Bob" == "C:Home\\Bob"
Windows: makeRelative "/Home" "/home/bob" == "bob"
Windows: makeRelative "/" "//" == "//"
Posix:   makeRelative "/Home" "/home/bob" == "/home/bob"
Posix:   makeRelative "/home/" "/home/bob/foo/bar" == "bob/foo/bar"
Posix:   makeRelative "/fred" "bob" == "bob"
Posix:   makeRelative "/file/test" "/file/test/fred" == "fred"
Posix:   makeRelative "/file/test" "/file/test/fred/" == "fred/"
Posix:   makeRelative "some/path" "some/path/a/b/c" == "a/b/c"

Is a path relative, or is it fixed to the root?

Windows: isRelative "path\\test" == True
Windows: isRelative "c:\\test" == False
Windows: isRelative "c:test" == True
Windows: isRelative "c:\\" == False
Windows: isRelative "c:/" == False
Windows: isRelative "c:" == True
Windows: isRelative "\\\\foo" == False
Windows: isRelative "\\\\?\\foo" == False
Windows: isRelative "\\\\?\\UNC\\foo" == False
Windows: isRelative "/foo" == True
Windows: isRelative "\\foo" == True
Posix:   isRelative "test/path" == True
Posix:   isRelative "/test" == False
Posix:   isRelative "/" == False

According to [1]:

• "A UNC name of any format [is never relative]."
• "You cannot use the "\?" prefix with a relative path."

not . isRelative

isAbsolute x == not (isRelative x)

Is a filepath valid, i.e. could you create a file like it? This function checks for invalid names, and invalid characters, but does not check if length limits are exceeded, as these are typically filesystem dependent.

         isValid "" == False
         isValid "\0" == False
Posix:   isValid "/random_ path:*" == True
Posix:   isValid x == not (null x)
Windows: isValid "c:\\test" == True
Windows: isValid "c:\\test:of_test" == False
Windows: isValid "test*" == False
Windows: isValid "c:\\test\\nul" == False
Windows: isValid "c:\\test\\prn.txt" == False
Windows: isValid "c:\\nul\\file" == False
Windows: isValid "\\\\" == False
Windows: isValid "\\\\\\foo" == False
Windows: isValid "\\\\?\\D:file" == False
Windows: isValid "foo\tbar" == False
Windows: isValid "nul .txt" == False
Windows: isValid " nul.txt" == True

Take a filepath and make it valid; does not change already valid filepaths.

isValid (makeValid x)
isValid x ==> makeValid x == x
makeValid "" == "_"
makeValid "file\0name" == "file_name"
Windows: makeValid "c:\\already\\/valid" == "c:\\already\\/valid"
Windows: makeValid "c:\\test:of_test" == "c:\\test_of_test"
Windows: makeValid "test*" == "test_"
Windows: makeValid "c:\\test\\nul" == "c:\\test\\nul_"
Windows: makeValid "c:\\test\\prn.txt" == "c:\\test\\prn_.txt"
Windows: makeValid "c:\\test/prn.txt" == "c:\\test/prn_.txt"
Windows: makeValid "c:\\nul\\file" == "c:\\nul_\\file"
Windows: makeValid "\\\\\\foo" == "\\\\drive"
Windows: makeValid "\\\\?\\D:file" == "\\\\?\\D:\\file"
Windows: makeValid "nul .txt" == "nul _.txt"