| Copyright | (C) 2013-2016 University of Twente 2016-2019 Myrtle Software Ltd 2017 Google Inc. 2021 QBayLogic B.V. |
|---|---|
| License | BSD2 (see the file LICENSE) |
| Maintainer | QBayLogic B.V. <devops@qbaylogic.com> |
| Safe Haskell | Trustworthy |
| Language | Haskell2010 |
| Extensions |
|
Clash.Signal
Contents
- Synchronous signals
- Domain
- Clock
- Reset
- Enabling
- Hidden clock, reset, and enable arguments
- Basic circuit functions
- Simulation and testbench functions
- Boolean connectives
- Product/Signal isomorphism
- Simulation functions (not synthesizable)
- List <-> Signal conversion (not synthesizable)
- QuickCheck combinators
- Type classes
- Bisignal functions
- Internals
Description
Clash has synchronous Signals in the form of:
Signal(dom ::Domain) a
Where a is the type of the value of the Signal, for example Int or Bool,
and dom is the clock- (and reset-) domain to which the memory elements
manipulating these Signals belong.
The type-parameter, dom, is of the kind Domain - a simple string. That
string refers to a single synthesis domain. A synthesis domain describes the
behavior of certain aspects of memory elements in it. More specifically, a
domain looks like:
DomainConfiguration{ _name ::Domain-- ^ Domain name , _period ::Nat-- ^ Clock period in ps , _activeEdge ::ActiveEdge-- ^ Active edge of the clock , _resetKind ::ResetKind-- ^ Whether resets are synchronous (edge-sensitive) or asynchronous (level-sensitive) , _initBehavior ::InitBehavior-- ^ Whether the initial (or "power up") value of memory elements is -- unknown/undefined, or configurable to a specific value , _resetPolarity :: ResetPolarity -- ^ Whether resets are active high or active low }
Check the documentation of each of the types to see the various options Clash
provides. In order to specify a domain, an instance of KnownDomain should be
made. Clash provides an implementation System with some common options
chosen:
instance KnownDomain System where type KnownConf System = 'DomainConfiguration System 10000 'Rising 'Asynchronous 'Defined 'ActiveHigh knownDomain = SDomainConfiguration SSymbol SNat SRising SAsynchronous SDefined SActiveHigh
In words, "System" is a synthesis domain with a clock running with a period of 10000 ps. Memory elements respond to the rising edge of the clock, asynchronously to changes in their resets, and have defined power up values if applicable.
In order to create a new domain, you don't have to instantiate it explicitly.
Instead, you can have createDomain create a domain for you. You can also use
the same function to subclass existing domains.
- NB: "Bad things"™ happen when you actually use a clock period of
0, so do not do that! - NB: You should be judicious using a clock with period of
1as you can never create a clock that goes any faster! - NB: Whether
Systemhas good defaults depends on your target platform. Check outIntelSystemandXilinxSystemtoo!
Synopsis
- data Signal (dom :: Domain) a
- data BiSignalIn (ds :: BiSignalDefault) (dom :: Domain) (n :: Nat)
- data BiSignalOut (ds :: BiSignalDefault) (dom :: Domain) (n :: Nat)
- data BiSignalDefault
- type Domain = Symbol
- sameDomain :: forall (domA :: Domain) (domB :: Domain). (KnownDomain domA, KnownDomain domB) => Maybe (domA :~: domB)
- class KnownSymbol dom => KnownDomain (dom :: Domain) where
- type KnownConf dom :: DomainConfiguration
- knownDomain :: SDomainConfiguration dom (KnownConf dom)
- type KnownConfiguration dom conf = (KnownDomain dom, KnownConf dom ~ conf)
- data ActiveEdge
- data SActiveEdge (edge :: ActiveEdge) where
- data InitBehavior
- data SInitBehavior (init :: InitBehavior) where
- data ResetKind
- data SResetKind (resetKind :: ResetKind) where
- data ResetPolarity
- data SResetPolarity (polarity :: ResetPolarity) where
- data DomainConfiguration = DomainConfiguration {}
- data SDomainConfiguration (dom :: Domain) (conf :: DomainConfiguration) where
- SDomainConfiguration :: SSymbol dom -> SNat period -> SActiveEdge edge -> SResetKind reset -> SInitBehavior init -> SResetPolarity polarity -> SDomainConfiguration dom ('DomainConfiguration dom period edge reset init polarity)
- type DomainPeriod (dom :: Domain) = DomainConfigurationPeriod (KnownConf dom)
- type DomainActiveEdge (dom :: Domain) = DomainConfigurationActiveEdge (KnownConf dom)
- type DomainResetKind (dom :: Domain) = DomainConfigurationResetKind (KnownConf dom)
- type DomainInitBehavior (dom :: Domain) = DomainConfigurationInitBehavior (KnownConf dom)
- type DomainResetPolarity (dom :: Domain) = DomainConfigurationResetPolarity (KnownConf dom)
- type System = "System" :: Domain
- type XilinxSystem = "XilinxSystem" :: Domain
- type IntelSystem = "IntelSystem" :: Domain
- vSystem :: VDomainConfiguration
- vIntelSystem :: VDomainConfiguration
- vXilinxSystem :: VDomainConfiguration
- data VDomainConfiguration = VDomainConfiguration {}
- vDomain :: SDomainConfiguration dom conf -> VDomainConfiguration
- createDomain :: VDomainConfiguration -> Q [Dec]
- knownVDomain :: forall dom. KnownDomain dom => VDomainConfiguration
- clockPeriod :: forall dom period. (KnownDomain dom, DomainPeriod dom ~ period) => SNat period
- activeEdge :: forall dom edge. (KnownDomain dom, DomainActiveEdge dom ~ edge) => SActiveEdge edge
- resetKind :: forall dom sync. (KnownDomain dom, DomainResetKind dom ~ sync) => SResetKind sync
- initBehavior :: forall dom init. (KnownDomain dom, DomainInitBehavior dom ~ init) => SInitBehavior init
- resetPolarity :: forall dom polarity. (KnownDomain dom, DomainResetPolarity dom ~ polarity) => SResetPolarity polarity
- data Clock (dom :: Domain)
- periodToHz :: Natural -> Ratio Natural
- hzToPeriod :: HasCallStack => Ratio Natural -> Natural
- unsafeSynchronizer :: forall dom1 dom2 a. (HiddenClock dom1, HiddenClock dom2) => Signal dom1 a -> Signal dom2 a
- data Reset (dom :: Domain)
- unsafeToReset :: Signal dom Bool -> Reset dom
- unsafeFromReset :: Reset dom -> Signal dom Bool
- unsafeToHighPolarity :: forall dom. KnownDomain dom => Reset dom -> Signal dom Bool
- unsafeToLowPolarity :: forall dom. KnownDomain dom => Reset dom -> Signal dom Bool
- unsafeFromHighPolarity :: forall dom. KnownDomain dom => Signal dom Bool -> Reset dom
- unsafeFromLowPolarity :: forall dom. KnownDomain dom => Signal dom Bool -> Reset dom
- convertReset :: forall domA domB. (HiddenClock domA, HiddenClock domB) => Reset domA -> Reset domB
- resetSynchronizer :: forall dom. KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> Reset dom
- resetGlitchFilter :: forall dom glitchlessPeriod n. (KnownDomain dom, glitchlessPeriod ~ (n + 1)) => SNat glitchlessPeriod -> Clock dom -> Reset dom -> Reset dom
- holdReset :: forall dom m. HiddenClockResetEnable dom => SNat m -> Reset dom
- data Enable dom
- toEnable :: Signal dom Bool -> Enable dom
- fromEnable :: Enable dom -> Signal dom Bool
- enableGen :: Enable dom
- type HiddenClock dom = (Hidden (HiddenClockName dom) (Clock dom), KnownDomain dom)
- hideClock :: forall dom r. HiddenClock dom => (Clock dom -> r) -> r
- exposeClock :: forall dom r. WithSingleDomain dom r => (HiddenClock dom => r) -> KnownDomain dom => Clock dom -> r
- withClock :: forall dom r. WithSingleDomain dom r => KnownDomain dom => Clock dom -> (HiddenClock dom => r) -> r
- exposeSpecificClock :: forall dom r. WithSpecificDomain dom r => (HiddenClock dom => r) -> KnownDomain dom => Clock dom -> r
- withSpecificClock :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) => Clock dom -> (HiddenClock dom => r) -> r
- hasClock :: forall dom. HiddenClock dom => Clock dom
- type HiddenReset dom = (Hidden (HiddenResetName dom) (Reset dom), KnownDomain dom)
- hideReset :: forall dom r. HiddenReset dom => (Reset dom -> r) -> r
- exposeReset :: forall dom r. WithSingleDomain dom r => (HiddenReset dom => r) -> KnownDomain dom => Reset dom -> r
- withReset :: forall dom r. WithSingleDomain dom r => KnownDomain dom => Reset dom -> (HiddenReset dom => r) -> r
- exposeSpecificReset :: forall dom r. WithSpecificDomain dom r => (HiddenReset dom => r) -> KnownDomain dom => Reset dom -> r
- withSpecificReset :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) => Reset dom -> (HiddenReset dom => r) -> r
- hasReset :: forall dom. HiddenReset dom => Reset dom
- type HiddenEnable dom = (Hidden (HiddenEnableName dom) (Enable dom), KnownDomain dom)
- hideEnable :: forall dom r. HiddenEnable dom => (Enable dom -> r) -> r
- exposeEnable :: forall dom r. WithSingleDomain dom r => (HiddenEnable dom => r) -> KnownDomain dom => Enable dom -> r
- withEnable :: forall dom r. KnownDomain dom => WithSingleDomain dom r => Enable dom -> (HiddenEnable dom => r) -> r
- exposeSpecificEnable :: forall dom r. WithSpecificDomain dom r => (HiddenEnable dom => r) -> KnownDomain dom => Enable dom -> r
- withSpecificEnable :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) => Enable dom -> (HiddenEnable dom => r) -> r
- hasEnable :: forall dom. HiddenEnable dom => Enable dom
- type HiddenClockResetEnable dom = (HiddenClock dom, HiddenReset dom, HiddenEnable dom)
- hideClockResetEnable :: forall dom r. HiddenClockResetEnable dom => (KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r) -> r
- exposeClockResetEnable :: forall dom r. WithSingleDomain dom r => (HiddenClockResetEnable dom => r) -> KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r
- withClockResetEnable :: forall dom r. KnownDomain dom => WithSingleDomain dom r => Clock dom -> Reset dom -> Enable dom -> (HiddenClockResetEnable dom => r) -> r
- exposeSpecificClockResetEnable :: forall dom r. WithSpecificDomain dom r => (HiddenClockResetEnable dom => r) -> KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r
- withSpecificClockResetEnable :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) => Clock dom -> Reset dom -> Enable dom -> (HiddenClockResetEnable dom => r) -> r
- type SystemClockResetEnable = (Hidden (HiddenClockName System) (Clock System), Hidden (HiddenResetName System) (Reset System), Hidden (HiddenEnableName System) (Enable System))
- dflipflop :: forall dom a. (HiddenClock dom, NFDataX a) => Signal dom a -> Signal dom a
- delay :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) => a -> Signal dom a -> Signal dom a
- delayMaybe :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) => a -> Signal dom (Maybe a) -> Signal dom a
- delayEn :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) => a -> Signal dom Bool -> Signal dom a -> Signal dom a
- register :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) => a -> Signal dom a -> Signal dom a
- regMaybe :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) => a -> Signal dom (Maybe a) -> Signal dom a
- regEn :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) => a -> Signal dom Bool -> Signal dom a -> Signal dom a
- mux :: Applicative f => f Bool -> f a -> f a -> f a
- clockGen :: KnownDomain dom => Clock dom
- resetGen :: forall dom. KnownDomain dom => Reset dom
- resetGenN :: forall dom n. (KnownDomain dom, 1 <= n) => SNat n -> Reset dom
- systemClockGen :: Clock System
- systemResetGen :: Reset System
- (.&&.) :: Applicative f => f Bool -> f Bool -> f Bool
- (.||.) :: Applicative f => f Bool -> f Bool -> f Bool
- class Bundle a where
- data EmptyTuple = EmptyTuple
- data TaggedEmptyTuple (dom :: Domain) = TaggedEmptyTuple
- simulate :: forall dom a b. (KnownDomain dom, NFDataX a, NFDataX b) => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> [a] -> [b]
- simulateB :: forall dom a b. (KnownDomain dom, Bundle a, Bundle b, NFDataX a, NFDataX b) => (HiddenClockResetEnable dom => Unbundled dom a -> Unbundled dom b) -> [a] -> [b]
- simulateN :: forall dom a b. (KnownDomain dom, NFDataX a, NFDataX b) => Int -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> [a] -> [b]
- simulateWithReset :: forall dom a b m. (KnownDomain dom, NFDataX a, NFDataX b, 1 <= m) => SNat m -> a -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> [a] -> [b]
- simulateWithResetN :: forall dom a b m. (KnownDomain dom, NFDataX a, NFDataX b, 1 <= m) => SNat m -> a -> Int -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> [a] -> [b]
- simulate_lazy :: forall dom a b. KnownDomain dom => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> [a] -> [b]
- simulateB_lazy :: forall dom a b. (KnownDomain dom, Bundle a, Bundle b) => (HiddenClockResetEnable dom => Unbundled dom a -> Unbundled dom b) -> [a] -> [b]
- signalAutomaton :: forall dom a b. KnownDomain dom => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> Automaton (->) a b
- sample :: forall dom a. (KnownDomain dom, NFDataX a) => (HiddenClockResetEnable dom => Signal dom a) -> [a]
- sampleN :: forall dom a. (KnownDomain dom, NFDataX a) => Int -> (HiddenClockResetEnable dom => Signal dom a) -> [a]
- sampleWithReset :: forall dom a m. (KnownDomain dom, NFDataX a, 1 <= m) => SNat m -> (HiddenClockResetEnable dom => Signal dom a) -> [a]
- sampleWithResetN :: forall dom a m. (KnownDomain dom, NFDataX a, 1 <= m) => SNat m -> Int -> (HiddenClockResetEnable dom => Signal dom a) -> [a]
- fromList :: NFDataX a => [a] -> Signal dom a
- fromListWithReset :: forall dom a. (HiddenReset dom, NFDataX a) => a -> [a] -> Signal dom a
- sample_lazy :: forall dom a. KnownDomain dom => (HiddenClockResetEnable dom => Signal dom a) -> [a]
- sampleN_lazy :: forall dom a. KnownDomain dom => Int -> (HiddenClockResetEnable dom => Signal dom a) -> [a]
- fromList_lazy :: [a] -> Signal dom a
- testFor :: KnownDomain dom => Int -> (HiddenClockResetEnable dom => Signal dom Bool) -> Property
- (.==.) :: (Eq a, Applicative f) => f a -> f a -> f Bool
- (./=.) :: (Eq a, Applicative f) => f a -> f a -> f Bool
- (.<.) :: (Ord a, Applicative f) => f a -> f a -> f Bool
- (.<=.) :: (Ord a, Applicative f) => f a -> f a -> f Bool
- (.>=.) :: (Ord a, Applicative f) => f a -> f a -> f Bool
- (.>.) :: (Ord a, Applicative f) => f a -> f a -> f Bool
- veryUnsafeToBiSignalIn :: (HasCallStack, KnownNat n, Given (SBiSignalDefault ds)) => BiSignalOut ds d n -> BiSignalIn ds d n
- readFromBiSignal :: (HasCallStack, BitPack a) => BiSignalIn ds d (BitSize a) -> Signal d a
- writeToBiSignal :: (HasCallStack, BitPack a) => BiSignalIn ds d (BitSize a) -> Signal d (Maybe a) -> BiSignalOut ds d (BitSize a)
- mergeBiSignalOuts :: (HasCallStack, KnownNat n) => Vec n (BiSignalOut defaultState dom m) -> BiSignalOut defaultState dom m
- type HiddenClockName dom = AppendSymbol dom "_clk"
- type HiddenResetName dom = AppendSymbol dom "_rst"
- type HiddenEnableName dom = AppendSymbol dom "_en"
Synchronous signals
data Signal (dom :: Domain) a Source #
Clash has synchronous Signals in the form of:
Signal(dom ::Domain) a
Where a is the type of the value of the Signal, for example Int or Bool,
and dom is the clock- (and reset-) domain to which the memory elements
manipulating these Signals belong.
The type-parameter, dom, is of the kind Domain - a simple string. That
string refers to a single synthesis domain. A synthesis domain describes the
behavior of certain aspects of memory elements in it.
- NB: "Bad things"™ happen when you actually use a clock period of
0, so do not do that! - NB: You should be judicious using a clock with period of
1as you can never create a clock that goes any faster! - NB: For the best compatibility make sure your period is divisible by 2, because some VHDL simulators don't support fractions of picoseconds.
- NB: Whether
Systemhas good defaults depends on your target platform. Check outIntelSystemandXilinxSystemtoo!
Signals have the type role
>>>:i Signaltype role Signal nominal representational ...
as it is safe to coerce the underlying value of a signal, but not safe to coerce a signal between different synthesis domains.
See the module documentation of Clash.Signal for more information about domains.
Instances
data BiSignalIn (ds :: BiSignalDefault) (dom :: Domain) (n :: Nat) Source #
The in part of an inout port. BiSignalIn has the type role
>>>:i BiSignalIntype role BiSignalIn nominal nominal nominal ...
as it is not safe to coerce the default behaviour, synthesis domain or width of the data in the signal.
data BiSignalOut (ds :: BiSignalDefault) (dom :: Domain) (n :: Nat) Source #
The out part of an inout port
Wraps (multiple) writing signals. The semantics are such that only one of the signals may write at a single time step.
BiSignalOut has the type role
>>>:i BiSignalOuttype role BiSignalOut nominal nominal nominal ...
as it is not safe to coerce the default behaviour, synthesis domain or width of the data in the signal.
Instances
| Semigroup (BiSignalOut defaultState dom n) Source # | NB Not synthesizable |
Defined in Clash.Signal.BiSignal Methods (<>) :: BiSignalOut defaultState dom n -> BiSignalOut defaultState dom n -> BiSignalOut defaultState dom n # sconcat :: NonEmpty (BiSignalOut defaultState dom n) -> BiSignalOut defaultState dom n # stimes :: Integral b => b -> BiSignalOut defaultState dom n -> BiSignalOut defaultState dom n # | |
| Monoid (BiSignalOut defaultState dom n) Source # | Monoid instance to support concatenating NB Not synthesizable |
Defined in Clash.Signal.BiSignal Methods mempty :: BiSignalOut defaultState dom n # mappend :: BiSignalOut defaultState dom n -> BiSignalOut defaultState dom n -> BiSignalOut defaultState dom n # mconcat :: [BiSignalOut defaultState dom n] -> BiSignalOut defaultState dom n # | |
| type HasDomain dom1 (BiSignalOut ds dom2 n) Source # | |
Defined in Clash.Signal.BiSignal | |
| type TryDomain t (BiSignalOut ds dom n) Source # | |
Defined in Clash.Signal.BiSignal | |
data BiSignalDefault Source #
Used to specify the default behavior of a "BiSignal", i.e. what value is read when no value is being written to it.
Constructors
| PullUp | inout port behaves as if connected to a pull-up resistor |
| PullDown | inout port behaves as if connected to a pull-down resistor |
| Floating | inout port behaves as if is floating. Reading a floating "BiSignal" value in simulation will yield an errorX (undefined value). |
Instances
| Show BiSignalDefault Source # | |
Defined in Clash.Signal.BiSignal Methods showsPrec :: Int -> BiSignalDefault -> ShowS # show :: BiSignalDefault -> String # showList :: [BiSignalDefault] -> ShowS # | |
Domain
sameDomain :: forall (domA :: Domain) (domB :: Domain). (KnownDomain domA, KnownDomain domB) => Maybe (domA :~: domB) Source #
We either get evidence that this function was instantiated with the same domains, or Nothing.
class KnownSymbol dom => KnownDomain (dom :: Domain) where Source #
A KnownDomain constraint indicates that a circuit's behavior depends on
some properties of a domain. See DomainConfiguration for more information.
Associated Types
type KnownConf dom :: DomainConfiguration Source #
Methods
knownDomain :: SDomainConfiguration dom (KnownConf dom) Source #
Returns SDomainConfiguration corresponding to an instance's DomainConfiguration.
Example usage:
>>>knownDomain @SystemSDomainConfiguration (SSymbol @"System") (SNat @10000) SRising SAsynchronous SDefined SActiveHigh
Instances
| KnownDomain XilinxSystem Source # | System instance with defaults set for Xilinx FPGAs |
Defined in Clash.Signal.Internal Associated Types type KnownConf XilinxSystem :: DomainConfiguration Source # Methods knownDomain :: SDomainConfiguration XilinxSystem (KnownConf XilinxSystem) Source # | |
| KnownDomain IntelSystem Source # | System instance with defaults set for Intel FPGAs |
Defined in Clash.Signal.Internal Associated Types type KnownConf IntelSystem :: DomainConfiguration Source # Methods knownDomain :: SDomainConfiguration IntelSystem (KnownConf IntelSystem) Source # | |
| KnownDomain System Source # | A clock (and reset) dom with clocks running at 100 MHz |
Defined in Clash.Signal.Internal Associated Types type KnownConf System :: DomainConfiguration Source # Methods knownDomain :: SDomainConfiguration System (KnownConf System) Source # | |
type KnownConfiguration dom conf = (KnownDomain dom, KnownConf dom ~ conf) Source #
data ActiveEdge Source #
Determines clock edge memory elements are sensitive to. Not yet implemented.
Constructors
| Rising | Elements are sensitive to the rising edge (low-to-high) of the clock. |
| Falling | Elements are sensitive to the falling edge (high-to-low) of the clock. |
Instances
data SActiveEdge (edge :: ActiveEdge) where Source #
Singleton version of ActiveEdge
Constructors
| SRising :: SActiveEdge 'Rising | |
| SFalling :: SActiveEdge 'Falling |
Instances
| Show (SActiveEdge edge) Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> SActiveEdge edge -> ShowS # show :: SActiveEdge edge -> String # showList :: [SActiveEdge edge] -> ShowS # | |
data InitBehavior Source #
Constructors
| Unknown | Power up value of memory elements is unknown. |
| Defined | If applicable, power up value of a memory element is defined. Applies to
|
Instances
data SInitBehavior (init :: InitBehavior) where Source #
Constructors
| SUnknown :: SInitBehavior 'Unknown | |
| SDefined :: SInitBehavior 'Defined |
Instances
| Show (SInitBehavior init) Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> SInitBehavior init -> ShowS # show :: SInitBehavior init -> String # showList :: [SInitBehavior init] -> ShowS # | |
Constructors
| Asynchronous | Elements respond asynchronously to changes in their reset input. This means that they do not wait for the next active clock edge, but respond immediately instead. Common on Intel FPGA platforms. |
| Synchronous | Elements respond synchronously to changes in their reset input. This means that changes in their reset input won't take effect until the next active clock edge. Common on Xilinx FPGA platforms. |
Instances
| Eq ResetKind Source # | |
| Data ResetKind Source # | |
Defined in Clash.Signal.Internal Methods gfoldl :: (forall d b. Data d => c (d -> b) -> d -> c b) -> (forall g. g -> c g) -> ResetKind -> c ResetKind # gunfold :: (forall b r. Data b => c (b -> r) -> c r) -> (forall r. r -> c r) -> Constr -> c ResetKind # toConstr :: ResetKind -> Constr # dataTypeOf :: ResetKind -> DataType # dataCast1 :: Typeable t => (forall d. Data d => c (t d)) -> Maybe (c ResetKind) # dataCast2 :: Typeable t => (forall d e. (Data d, Data e) => c (t d e)) -> Maybe (c ResetKind) # gmapT :: (forall b. Data b => b -> b) -> ResetKind -> ResetKind # gmapQl :: (r -> r' -> r) -> r -> (forall d. Data d => d -> r') -> ResetKind -> r # gmapQr :: forall r r'. (r' -> r -> r) -> r -> (forall d. Data d => d -> r') -> ResetKind -> r # gmapQ :: (forall d. Data d => d -> u) -> ResetKind -> [u] # gmapQi :: Int -> (forall d. Data d => d -> u) -> ResetKind -> u # gmapM :: Monad m => (forall d. Data d => d -> m d) -> ResetKind -> m ResetKind # gmapMp :: MonadPlus m => (forall d. Data d => d -> m d) -> ResetKind -> m ResetKind # gmapMo :: MonadPlus m => (forall d. Data d => d -> m d) -> ResetKind -> m ResetKind # | |
| Ord ResetKind Source # | |
| Read ResetKind Source # | |
| Show ResetKind Source # | |
| Generic ResetKind Source # | |
| NFData ResetKind Source # | |
Defined in Clash.Signal.Internal | |
| Hashable ResetKind Source # | |
Defined in Clash.Signal.Internal | |
| type Rep ResetKind Source # | |
data SResetKind (resetKind :: ResetKind) where Source #
Singleton version of ResetKind
Constructors
| SAsynchronous :: SResetKind 'Asynchronous | |
| SSynchronous :: SResetKind 'Synchronous |
Instances
| Show (SResetKind reset) Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> SResetKind reset -> ShowS # show :: SResetKind reset -> String # showList :: [SResetKind reset] -> ShowS # | |
data ResetPolarity Source #
Determines the value for which a reset line is considered "active"
Constructors
| ActiveHigh | Reset is considered active if underlying signal is |
| ActiveLow | Reset is considered active if underlying signal is |
Instances
data SResetPolarity (polarity :: ResetPolarity) where Source #
Singleton version of ResetPolarity
Constructors
| SActiveHigh :: SResetPolarity 'ActiveHigh | |
| SActiveLow :: SResetPolarity 'ActiveLow |
Instances
| Show (SResetPolarity polarity) Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> SResetPolarity polarity -> ShowS # show :: SResetPolarity polarity -> String # showList :: [SResetPolarity polarity] -> ShowS # | |
data DomainConfiguration Source #
A domain with a name (Domain). Configures the behavior of various aspects
of a circuits. See the documentation of this record's field types for more
information on the options.
See module documentation of Clash.Explicit.Signal for more information on how to create custom synthesis domains.
Constructors
| DomainConfiguration | |
Fields
| |
data SDomainConfiguration (dom :: Domain) (conf :: DomainConfiguration) where Source #
Singleton version of DomainConfiguration
Constructors
| SDomainConfiguration :: SSymbol dom -> SNat period -> SActiveEdge edge -> SResetKind reset -> SInitBehavior init -> SResetPolarity polarity -> SDomainConfiguration dom ('DomainConfiguration dom period edge reset init polarity) |
Instances
| Show (SDomainConfiguration dom conf) Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> SDomainConfiguration dom conf -> ShowS # show :: SDomainConfiguration dom conf -> String # showList :: [SDomainConfiguration dom conf] -> ShowS # | |
Configuration type families
type DomainPeriod (dom :: Domain) = DomainConfigurationPeriod (KnownConf dom) Source #
Convenience type to help to extract a period from a domain. Example usage:
myFunc :: (KnownDomain dom, DomainPeriod dom ~ 6000) => ...
type DomainActiveEdge (dom :: Domain) = DomainConfigurationActiveEdge (KnownConf dom) Source #
Convenience type to help to extract the active edge from a domain. Example usage:
myFunc :: (KnownDomain dom, DomainActiveEdge dom ~ 'Rising) => ...
type DomainResetKind (dom :: Domain) = DomainConfigurationResetKind (KnownConf dom) Source #
Convenience type to help to extract the reset synchronicity from a domain. Example usage:
myFunc :: (KnownDomain dom, DomainResetKind dom ~ 'Synchronous) => ...
type DomainInitBehavior (dom :: Domain) = DomainConfigurationInitBehavior (KnownConf dom) Source #
Convenience type to help to extract the initial value behavior from a domain. Example usage:
myFunc :: (KnownDomain dom, DomainInitBehavior dom ~ 'Defined) => ...
type DomainResetPolarity (dom :: Domain) = DomainConfigurationResetPolarity (KnownConf dom) Source #
Convenience type to help to extract the reset polarity from a domain. Example usage:
myFunc :: (KnownDomain dom, DomainResetPolarity dom ~ 'ActiveHigh) => ...
Default domains
type System = "System" :: Domain Source #
A clock (and reset) dom with clocks running at 100 MHz. Memory elements respond to the rising edge of the clock, and asynchronously to changes in reset signals. It has defined initial values, and active-high resets.
See module documentation of Clash.Explicit.Signal for more information on how to create custom synthesis domains.
type XilinxSystem = "XilinxSystem" :: Domain Source #
A clock (and reset) dom with clocks running at 100 MHz. Memory elements respond to the rising edge of the clock, and synchronously to changes in reset signals. It has defined initial values, and active-high resets.
See module documentation of Clash.Explicit.Signal for more information on how to create custom synthesis domains.
type IntelSystem = "IntelSystem" :: Domain Source #
A clock (and reset) dom with clocks running at 100 MHz. Memory elements respond to the rising edge of the clock, and asynchronously to changes in reset signals. It has defined initial values, and active-high resets.
See module documentation of Clash.Explicit.Signal for more information on how to create custom synthesis domains.
vSystem :: VDomainConfiguration Source #
Convenience value to allow easy "subclassing" of System domain. Should
be used in combination with createDomain. For example, if you just want to
change the period but leave all other settings intact use:
createDomain vSystem{vName="System10", vPeriod=10}vIntelSystem :: VDomainConfiguration Source #
Convenience value to allow easy "subclassing" of IntelSystem domain. Should
be used in combination with createDomain. For example, if you just want to
change the period but leave all other settings intact use:
createDomain vIntelSystem{vName="Intel10", vPeriod=10}vXilinxSystem :: VDomainConfiguration Source #
Convenience value to allow easy "subclassing" of XilinxSystem domain. Should
be used in combination with createDomain. For example, if you just want to
change the period but leave all other settings intact use:
createDomain vXilinxSystem{vName="Xilinx10", vPeriod=10}Domain utilities
data VDomainConfiguration Source #
Same as SDomainConfiguration but allows for easy updates through record update syntax.
Should be used in combination with vDomain and createDomain. Example:
createDomain (knownVDomain @System){vName="System10", vPeriod=10}This duplicates the settings in the System domain, replaces the name and
period, and creates an instance for it. As most users often want to update
the system domain, a shortcut is available in the form:
createDomain vSystem{vName="System10", vPeriod=10}Constructors
| VDomainConfiguration | |
Fields
| |
Instances
| Eq VDomainConfiguration Source # | |
Defined in Clash.Signal.Internal Methods (==) :: VDomainConfiguration -> VDomainConfiguration -> Bool # (/=) :: VDomainConfiguration -> VDomainConfiguration -> Bool # | |
| Read VDomainConfiguration Source # | |
Defined in Clash.Signal.Internal Methods readsPrec :: Int -> ReadS VDomainConfiguration # readList :: ReadS [VDomainConfiguration] # | |
| Show VDomainConfiguration Source # | |
Defined in Clash.Signal.Internal Methods showsPrec :: Int -> VDomainConfiguration -> ShowS # show :: VDomainConfiguration -> String # showList :: [VDomainConfiguration] -> ShowS # | |
vDomain :: SDomainConfiguration dom conf -> VDomainConfiguration Source #
Convert SDomainConfiguration to VDomainConfiguration. Should be used in combination with
createDomain only.
createDomain :: VDomainConfiguration -> Q [Dec] Source #
Convenience method to express new domains in terms of others.
createDomain (knownVDomain @System){vName="System10", vPeriod=10}This duplicates the settings in the System domain, replaces the name and period, and creates an instance for it. As most users often want to update the system domain, a shortcut is available in the form:
createDomain vSystem{vName="System10", vPeriod=10}The function will create two extra identifiers. The first:
type System10 = ..
You can use that as the dom to Clocks/Resets/Enables/Signals. For example:
Signal System10 Int. Additionally, it will create a VDomainConfiguration that you can
use in later calls to createDomain:
vSystem10 = knownVDomain @System10
It will also make System10 an instance of KnownDomain.
If either identifier is already in scope it will not be generated a second time. Note: This can be useful for example when documenting a new domain:
-- | Here is some documentation for CustomDomain
type CustomDomain = ("CustomDomain" :: Domain)
-- | Here is some documentation for vCustomDomain
createDomain vSystem{vName="CustomDomain"}knownVDomain :: forall dom. KnownDomain dom => VDomainConfiguration Source #
Like 'knownDomain but yields a VDomainConfiguration. Should only be used
in combination with createDomain.
clockPeriod :: forall dom period. (KnownDomain dom, DomainPeriod dom ~ period) => SNat period Source #
Get the clock period from a KnownDomain context
activeEdge :: forall dom edge. (KnownDomain dom, DomainActiveEdge dom ~ edge) => SActiveEdge edge Source #
Get ActiveEdge from a KnownDomain context. Example usage:
f :: forall dom . KnownDomain dom => ....
f a b c =
case activeEdge @dom of
SRising -> foo
SFalling -> bar
resetKind :: forall dom sync. (KnownDomain dom, DomainResetKind dom ~ sync) => SResetKind sync Source #
Get ResetKind from a KnownDomain context. Example usage:
f :: forall dom . KnownDomain dom => ....
f a b c =
case resetKind @dom of
SAsynchronous -> foo
SSynchronous -> bar
initBehavior :: forall dom init. (KnownDomain dom, DomainInitBehavior dom ~ init) => SInitBehavior init Source #
Get InitBehavior from a KnownDomain context. Example usage:
f :: forall dom . KnownDomain dom => ....
f a b c =
case initBehavior @dom of
SDefined -> foo
SUnknown -> bar
resetPolarity :: forall dom polarity. (KnownDomain dom, DomainResetPolarity dom ~ polarity) => SResetPolarity polarity Source #
Get ResetPolarity from a KnownDomain context. Example usage:
f :: forall dom . KnownDomain dom => ....
f a b c =
case resetPolarity @dom of
SActiveHigh -> foo
SActiveLow -> bar
Clock
data Clock (dom :: Domain) Source #
A clock signal belonging to a domain named dom.
Instances
periodToHz :: Natural -> Ratio Natural Source #
Calculate the frequence in Hz, given the period in ps
i.e. to calculate the clock frequency of a clock with a period of 5000 ps:
>>>periodToHz 5000200000000 % 1
NB: This function is not synthesizable
hzToPeriod :: HasCallStack => Ratio Natural -> Natural Source #
Calculate the period, in ps, given a frequency in Hz
i.e. to calculate the clock period for a circuit to run at 240 MHz we get
>>>hzToPeriod 240e64166
NB: This function is not synthesizable
NB: This function is lossy. I.e., periodToHz . hzToPeriod /= id.
Synchronization primitive
unsafeSynchronizer :: forall dom1 dom2 a. (HiddenClock dom1, HiddenClock dom2) => Signal dom1 a -> Signal dom2 a Source #
Implicit version of unsafeSynchronizer.
Reset
data Reset (dom :: Domain) Source #
A reset signal belonging to a domain called dom.
The underlying representation of resets is Bool.
unsafeToReset :: Signal dom Bool -> Reset dom Source #
unsafeToReset is unsafe. For asynchronous resets it is unsafe
because it can introduce combinatorial loops. In case of synchronous resets
it can lead to meta-stability
issues in the presence of asynchronous resets.
NB: You probably want to use unsafeFromLowPolarity or
unsafeFromHighPolarity.
unsafeFromReset :: Reset dom -> Signal dom Bool Source #
unsafeFromReset is unsafe because it can introduce:
For asynchronous resets it is unsafe because it can cause combinatorial loops. In case of synchronous resets it can lead to meta-stability in the presence of asynchronous resets.
NB: You probably want to use unsafeToLowPolarity or
unsafeToHighPolarity.
unsafeToHighPolarity :: forall dom. KnownDomain dom => Reset dom -> Signal dom Bool Source #
Convert a reset to an active high reset. Has no effect if reset is already an active high reset. Is unsafe because it can introduce:
For asynchronous resets it is unsafe because it can cause combinatorial loops. In case of synchronous resets it can lead to meta-stability in the presence of asynchronous resets.
unsafeToLowPolarity :: forall dom. KnownDomain dom => Reset dom -> Signal dom Bool Source #
Convert a reset to an active low reset. Has no effect if reset is already an active low reset. It is unsafe because it can introduce:
For asynchronous resets it is unsafe because it can cause combinatorial loops. In case of synchronous resets it can lead to meta-stability in the presence of asynchronous resets.
unsafeFromHighPolarity Source #
Arguments
| :: forall dom. KnownDomain dom | |
| => Signal dom Bool | Reset signal that's |
| -> Reset dom |
Interpret a signal of bools as an active high reset and convert it to a reset signal corresponding to the domain's setting.
For asynchronous resets it is unsafe because it can cause combinatorial loops. In case of synchronous resets it can lead to meta-stability in the presence of asynchronous resets.
unsafeFromLowPolarity Source #
Arguments
| :: forall dom. KnownDomain dom | |
| => Signal dom Bool | Reset signal that's |
| -> Reset dom |
Interpret a signal of bools as an active low reset and convert it to a reset signal corresponding to the domain's setting.
For asynchronous resets it is unsafe because it can cause combinatorial loops. In case of synchronous resets it can lead to meta-stability in the presence of asynchronous resets.
convertReset :: forall domA domB. (HiddenClock domA, HiddenClock domB) => Reset domA -> Reset domB Source #
Convert between different types of reset, adding a synchronizer in case it needs to convert from an asynchronous to a synchronous reset.
Arguments
| :: forall dom. KnownDomain dom | |
| => Clock dom | |
| -> Reset dom | |
| -> Enable dom | Warning: this argument will be removed in future versions of Clash. |
| -> Reset dom |
The resetSynchronizer will synchronize an incoming reset according to whether the domain is synchronous or asynchronous.
For asynchronous resets this synchronizer ensures the reset will only be de-asserted synchronously but it can still be asserted asynchronously. The reset assert is immediate, but reset de-assertion is delayed by two cycles.
Normally, asynchronous resets can be both asynchronously asserted and
de-asserted. Asynchronous de-assertion can induce meta-stability in the
component which is being reset. To ensure this doesn't happen,
resetSynchronizer ensures that de-assertion of a reset happens
synchronously. Assertion of the reset remains asynchronous.
Note that asynchronous assertion does not induce meta-stability in the component whose reset is asserted. However, when a component "A" in another clock or reset domain depends on the value of a component "B" being reset, then asynchronous assertion of the reset of component "B" can induce meta-stability in component "A". To prevent this from happening you need to use a proper synchronizer, for example one of the synchronizers in Clash.Explicit.Synchronizer.
For synchronous resets this function ensures that the reset is asserted and de-asserted synchronously. Both the assertion and de-assertion of the reset are delayed by two cycles.
Example 1
The circuit below detects a rising bit (i.e., a transition from 0 to 1) in a
given argument. It takes a reset that is not synchronized to any of the other
incoming signals and synchronizes it using resetSynchronizer.
topEntity
:: Clock System
-> Reset System
-> Enable System
-> Signal System Bit
-> Signal System (BitVector 8)
topEntity clk asyncRst ena key1 =
withClockResetEnable clk rst ena leds
where
rst = resetSynchronizer clk asyncRst ena
key1R = isRising 1 key1
leds = mealy blinkerT (1, False, 0) key1R
Example 2
Similar to Example 1 this circuit detects a rising bit (i.e., a transition from 0 to 1) in a given argument. It takes a clock that is not stable yet and a reset singal that is not synchronized to any other signals. It stabalizes the clock and then synchronizes the reset signal.
topEntity
:: Clock System
-> Reset System
-> Signal System Bit
-> Signal System (BitVector 8)
topEntity clk rst ena key1 =
let (pllOut,pllStable) = altpll (SSymbol @"altpll50") clk rst
rstSync = resetSynchronizer pllOut (unsafeToHighPolarity pllStable) ena
in exposeClockResetEnable leds pllOut rstSync enableGen
where
key1R = isRising 1 key1
leds = mealy blinkerT (1, False, 0) key1R
Implementation details
resetSynchronizer implements the following circuit for asynchronous domains:
rst
--------------------------------------+
| |
+----v----+ +----v----+
deasserted | | | |
---------------> +-------> +-------->
| | | |
+---|> | +---|> |
| | | | | |
| +---------+ | +---------+
clk | |
-----------------------------+
This corresponds to figure 3d at https://www.embedded.com/asynchronous-reset-synchronization-and-distribution-challenges-and-solutions/
For synchronous domains two sequential dflipflops are used:
+---------+ +---------+
rst | | | |
---------------> +-------> +-------->
| | | |
+---|> | +---|> |
| | | | | |
| +---------+ | +---------+
clk | |
-----------------------------+
Arguments
| :: forall dom glitchlessPeriod n. (KnownDomain dom, glitchlessPeriod ~ (n + 1)) | |
| => SNat glitchlessPeriod | Consider a reset signal to be properly asserted after having seen the reset asserted for glitchlessPeriod cycles straight. |
| -> Clock dom | |
| -> Reset dom | |
| -> Reset dom |
Filter glitches from reset signals by only triggering a reset after it has been asserted for glitchlessPeriod cycles. It will then stay asserted for as long as the given reset was asserted consecutively.
If synthesized on a domain with initial values, resetGlitchFilter will
output an asserted reset for glitchlessPeriod cycles (plus any cycles added
by the given reset). If initial values can't be used, it will only output
defined reset values after glitchlessPeriod cycles.
Example 1
>>>let sampleResetN n = sampleN n . unsafeToHighPolarity>>>let resetFromList = unsafeFromHighPolarity . fromList>>>let rst = resetFromList [True, True, False, False, True, False, False, True, True, False, True]>>>sampleResetN 12 (resetGlitchFilter d2 systemClockGen rst)[True,True,True,True,False,False,False,False,False,True,True,False]
Arguments
| :: forall dom m. HiddenClockResetEnable dom | |
| => SNat m | Hold for m cycles, counting from the moment the incoming reset signal becomes deasserted. |
| -> Reset dom |
Hold reset for a number of cycles relative to an implicit reset signal.
Example:
>>>sampleN @System 8 (unsafeToHighPolarity (holdReset (SNat @2)))[True,True,True,False,False,False,False,False]
holdReset holds the reset for an additional 2 clock cycles for a total
of 3 clock cycles where the reset is asserted.
Enabling
A signal of booleans, indicating whether a component is enabled. No special meaning is implied, it's up to the component itself to decide how to respond to its enable line. It is used throughout Clash as a global enable signal.
fromEnable :: Enable dom -> Signal dom Bool Source #
Convert Enable construct to its underlying representation: a signal of
bools.
Hidden clock, reset, and enable arguments
Clocks, resets and enables are by default implicitly routed to their components. You can see from the type of a component whether it has hidden clock, reset or enable arguments:
It has a hidden clock when it has a:
f :: HiddenClock dom => ...
Constraint.
Or it has a hidden reset when it has a:
g :: HiddenReset dom => ...
Constraint.
Or it has a hidden enable when it has a:
g :: HiddenEnable dom => ...
Constraint.
Or it has a hidden clock argument, a hidden reset argument and a hidden enable argument when it has a:
h :: HiddenClockResetEnable dom => ..
Constraint.
Given a component with explicit clock, reset and enable arguments, you can turn
them into hidden arguments using hideClock, hideReset, and hideEnable. So
given a:
f :: Clock dom -> Reset dom -> Enable dom -> Signal dom a -> ...
You hide the clock and reset arguments by:
-- g ::HiddenClockResetEnabledom => Signal dom a -> ... g =hideClockResetEnablef
Or, alternatively, by:
-- h ::HiddenClockResetEnabledom => Signal dom a -> ... h = fhasClockhasResethasEnable
Assigning explicit clock, reset and enable arguments to hidden clocks, resets and enables
Given a component:
f :: HiddenClockResetEnable dom
=> Signal dom Int
-> Signal dom Int
which has hidden clock, reset and enable arguments, we expose those hidden arguments so that we can explicitly apply them:
-- g :: Clock dom -> Reset dom -> Enable dom -> Signal dom Int -> Signal dom Int
g = exposeClockResetEnable f
or, alternatively, by:
-- h :: Clock dom -> Reset dom -> Enable dom -> Signal dom Int -> Signal dom Int
h clk rst en = withClockResetEnable clk rst en f
Similarly, there are exposeClock, exposeReset and exposeEnable to just
expose the hidden clock, the hidden reset or the hidden enable argument.
You will need to explicitly apply clocks and resets when you want to use
components such as PLLs and resetSynchronizer:
topEntity
:: Clock System
-> Reset System
-> Signal System Bit
-> Signal System (BitVector 8)
topEntity clk rst key1 =
let (pllOut,pllStable) = altpll (SSymbol @"altpll50") clk rst
rstSync = resetSynchronizer pllOut (unsafeToHighPolarity pllStable) enableGen
in exposeClockResetEnable leds pllOut rstSync enableGen
where
key1R = isRising 1 key1
leds = mealy blinkerT (1, False, 0) key1R
or, using the alternative method:
topEntity
:: Clock System
-> Reset System
-> Signal System Bit
-> Signal System (BitVector 8)
topEntity clk rst key1 =
let (pllOut,pllStable) = altpll (SSymbol @"altpll50") clk rst
rstSync = resetSynchronizer pllOut (unsafeToHighPolarity pllStable) enableGen
in withClockResetEnable pllOut rstSync enableGen leds
where
key1R = isRising 1 key1
leds = mealy blinkerT (1, False, 0) key1R
Hidden clock
type HiddenClock dom = (Hidden (HiddenClockName dom) (Clock dom), KnownDomain dom) Source #
A constraint that indicates the component has a hidden Clock
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. HiddenClock dom | |
| => (Clock dom -> r) | Function whose clock argument you want to hide |
| -> r |
Hide the Clock argument of a component, so it can be routed implicitly.
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => (HiddenClock dom => r) | The component with a hidden clock |
| -> KnownDomain dom => Clock dom -> r | The component with its clock argument exposed |
Expose a hidden Clock argument of a component, so it can be applied
explicitly.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenClock dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenClock dom => Signal dom a -> Signal dom a
If you want to expose a clock of a component working on multiple domains
(such as the first example), use exposeSpecificClock.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = exposeClock reg clockGen>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force exposeClock to work on System (hence sampleN not needing an explicit
domain later):
>>>reg = register 5 (reg + 1)>>>sig = exposeClock @System reg clockGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => KnownDomain dom | |
| => Clock dom | The |
| -> (HiddenClock dom => r) | The function with a hidden |
| -> r |
Connect an explicit Clock to a function with a hidden Clock.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenClock dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenClock dom => Signal dom a -> Signal dom a
If you want to connect a clock to a component working on multiple domains
(such as the first example), use withSpecificClock.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = withClock clockGen reg>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force withClock to work on System (hence sampleN not needing an explicit
domain later):
>>>reg = register 5 (reg + 1)>>>sig = withClock @System clockGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. WithSpecificDomain dom r | |
| => (HiddenClock dom => r) | The component with a hidden clock |
| -> KnownDomain dom => Clock dom -> r | The component with its clock argument exposed |
Expose a hidden Clock argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to exposeClock, callers should explicitly state what the clock
domain is. See the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
exposeSpecificClock can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = exposeSpecificClock @System reg clockGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@dom regexposeSpecificClockclockGen
Arguments
| :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) | |
| => Clock dom | The |
| -> (HiddenClock dom => r) | The function with a hidden |
| -> r |
Connect an explicit Clock to a function with a hidden Clock. This
function can be used on components with multiple domains. As opposed to
withClock, callers should explicitly state what the clock domain is. See
the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
withSpecificClock can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = withSpecificClock @System clockGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@domwithSpecificClockclockGenreg
hasClock :: forall dom. HiddenClock dom => Clock dom Source #
Connect a hidden Clock to an argument where a normal Clock argument
was expected.
Click here to read more about hidden clocks, resets, and enables
Hidden reset
type HiddenReset dom = (Hidden (HiddenResetName dom) (Reset dom), KnownDomain dom) Source #
A constraint that indicates the component needs a Reset
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. HiddenReset dom | |
| => (Reset dom -> r) | Component whose reset argument you want to hide |
| -> r |
Hide the Reset argument of a component, so it can be routed implicitly.
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => (HiddenReset dom => r) | The component with a hidden reset |
| -> KnownDomain dom => Reset dom -> r | The component with its reset argument exposed |
Expose a hidden Reset argument of a component, so it can be applied
explicitly.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenReset dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenReset dom => Signal dom a -> Signal dom a
If you want to expose a reset of a component working on multiple domains
(such as the first example), use exposeSpecificReset.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = exposeReset reg resetGen>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force exposeReset to work on System (hence sampleN not needing an explicit
domain later):
>>>reg = register 5 (reg + 1)>>>sig = exposeReset @System reg resetGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => KnownDomain dom | |
| => Reset dom | The |
| -> (HiddenReset dom => r) | The function with a hidden |
| -> r |
Connect an explicit Reset to a function with a hidden Reset.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenReset dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenReset dom => Signal dom a -> Signal dom a
If you want to connect a reset to a component working on multiple domains
(such as the first example), use withSpecificReset.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = withReset resetGen reg>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force withReset to work on System (hence sampleN not needing an explicit
domain later):
>>>reg = register 5 (reg + 1)>>>sig = withReset @System resetGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. WithSpecificDomain dom r | |
| => (HiddenReset dom => r) | The component with a hidden reset |
| -> KnownDomain dom => Reset dom -> r | The component with its reset argument exposed |
Expose a hidden Reset argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to exposeReset, callers should explicitly state what the reset
domain is. See the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
exposeSpecificReset can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = exposeSpecificReset @System reg resetGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@dom regexposeSpecificResetresetGen
Arguments
| :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) | |
| => Reset dom | The |
| -> (HiddenReset dom => r) | The function with a hidden |
| -> r |
Connect an explicit Reset to a function with a hidden Reset. This
function can be used on components with multiple domains. As opposed to
withReset, callers should explicitly state what the reset domain is. See
the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
withSpecificReset can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = withSpecificReset @System resetGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@domwithSpecificResetresetGenreg
hasReset :: forall dom. HiddenReset dom => Reset dom Source #
Connect a hidden Reset to an argument where a normal Reset argument
was expected.
Click here to read more about hidden clocks, resets, and enables
Hidden enable
type HiddenEnable dom = (Hidden (HiddenEnableName dom) (Enable dom), KnownDomain dom) Source #
A constraint that indicates the component needs an Enable
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. HiddenEnable dom | |
| => (Enable dom -> r) | Component whose enable argument you want to hide |
| -> r |
Hide the Enable argument of a component, so it can be routed implicitly.
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => (HiddenEnable dom => r) | The component with a hidden enable |
| -> KnownDomain dom => Enable dom -> r | The component with its enable argument exposed |
Expose a hidden Enable argument of a component, so it can be applied
explicitly.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenEnable dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenEnable dom => Signal dom a -> Signal dom a
If you want to expose a enable of a component working on multiple domains
(such as the first example), use exposeSpecificEnable.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = exposeEnable reg enableGen>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force exposeEnable to work on System (hence sampleN not needing an
explicit domain later):
>>>reg = register 5 (reg + 1)>>>sig = exposeEnable @System reg enableGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. KnownDomain dom | |
| => WithSingleDomain dom r | |
| => Enable dom | The |
| -> (HiddenEnable dom => r) | The function with a hidden |
| -> r |
Connect an explicit Enable to a function with a hidden Enable.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenEnable dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenEnable dom => Signal dom a -> Signal dom a
If you want to connect a enable to a component working on multiple domains
(such as the first example), use withSpecificEnable.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = withEnable enableGen reg>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force withEnable to work on System (hence sampleN not needing an explicit
domain later):
>>>reg = register 5 (reg + 1)>>>sig = withEnable @System enableGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Arguments
| :: forall dom r. WithSpecificDomain dom r | |
| => (HiddenEnable dom => r) | The component with a hidden enable |
| -> KnownDomain dom => Enable dom -> r | The component with its enable argument exposed |
Expose a hidden Enable argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to exposeEnable, callers should explicitly state what the enable
domain is. See the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
exposeSpecificEnable can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = exposeSpecificEnable @System reg enableGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@dom regexposeSpecificEnableenableGen
Arguments
| :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) | |
| => Enable dom | The |
| -> (HiddenEnable dom => r) | The function with a hidden |
| -> r |
Connect an explicit Enable to a function with a hidden Enable. This
function can be used on components with multiple domains. As opposed to
withEnable, callers should explicitly state what the enable domain is. See
the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
withSpecificEnable can only be used when it can find the specified domain
in r:
>>>reg = register @System 5 (reg + 1)>>>sig = withSpecificEnable @System enableGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@domwithSpecificEnableenableGenreg
hasEnable :: forall dom. HiddenEnable dom => Enable dom Source #
Connect a hidden Enable to an argument where a normal Enable argument
was expected.
Click here to read more about hidden clocks, resets, and enables
Hidden clock, reset, and enable
type HiddenClockResetEnable dom = (HiddenClock dom, HiddenReset dom, HiddenEnable dom) Source #
A constraint that indicates the component needs a Clock, a Reset,
and an Enable belonging to the same dom.
Click here to read more about hidden clocks, resets, and enables
Arguments
| :: forall dom r. HiddenClockResetEnable dom | |
| => (KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r) | Component whose clock, reset, and enable argument you want to hide |
| -> r |
Hide the Clock, Reset, and Enable arguments of a component, so they
can be routed implicitly.
Click here to read more about hidden clocks, resets, and enables
exposeClockResetEnable Source #
Arguments
| :: forall dom r. WithSingleDomain dom r | |
| => (HiddenClockResetEnable dom => r) | The component with hidden clock, reset, and enable arguments |
| -> KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r | The component with its clock, reset, and enable arguments exposed |
Expose hidden Clock, Reset, and Enable arguments of a component, so
they can be applied explicitly.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenClockResetEnable dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenClockResetEnable dom => Signal dom a -> Signal dom a
If you want to expose a clock, reset, and enable of a component working on
multiple domains (such as the first example), use exposeSpecificClockResetEnable.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = exposeClockResetEnable reg clockGen resetGen enableGen>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force exposeClockResetEnable to work on System (hence sampleN not needing
an explicit domain later):
>>>reg = register 5 (reg + 1)>>>sig = exposeClockResetEnable @System reg clockGen resetGen enableGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Usage in a testbench context:
topEntity :: Vec 2 (Vec 3 (Unsigned 8)) -> Vec 6 (Unsigned 8)
topEntity = concat
testBench :: Signal System Bool
testBench = done
where
testInput = pure ((1 :> 2 :> 3 :> Nil) :> (4 :> 5 :> 6 :> Nil) :> Nil)
expectedOutput = outputVerifier' ((1:>2:>3:>4:>5:>6:>Nil):>Nil)
done = exposeClockResetEnable (expectedOutput (topEntity <$> testInput)) clk rst en
clk = tbSystemClockGen (not <$> done)
rst = systemResetGen
en = enableGen
Arguments
| :: forall dom r. KnownDomain dom | |
| => WithSingleDomain dom r | |
| => Clock dom | The |
| -> Reset dom | The |
| -> Enable dom | The |
| -> (HiddenClockResetEnable dom => r) | The function with a hidden |
| -> r |
Connect an explicit Clock, Reset, and Enable to a function with a
hidden Clock, Reset, and Enable.
This function can only be used on components with a single domain. For example, this function will refuse when:
r ~ HiddenClockResetEnable dom1 => Signal dom1 a -> Signal dom2 a
But will work when:
r ~ HiddenClockResetEnable dom => Signal dom a -> Signal dom a
If you want to connect a clock, reset, and enable to a component working on
multiple domains (such as the first example), use
withSpecificClockResetEnable.
Click here to read more about hidden clocks, resets, and enables
Example
Usage with a polymorphic domain:
>>>reg = register 5 (reg + 1)>>>sig = withClockResetEnable clockGen resetGen enableGen reg>>>sampleN @System 10 sig[5,5,6,7,8,9,10,11,12,13]
Force withClockResetEnable to work on System (hence sampleN not needing
an explicit domain later):
>>>reg = register 5 (reg + 1)>>>sig = withClockResetEnable @System clockGen resetGen enableGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
exposeSpecificClockResetEnable Source #
Arguments
| :: forall dom r. WithSpecificDomain dom r | |
| => (HiddenClockResetEnable dom => r) | |
| -> KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r | The component with its |
Expose hidden Clock, Reset, and Enable arguments of a component, so
they can be applied explicitly. This function can be used on components with
multiple domains. As opposed to exposeClockResetEnable, callers should
explicitly state what the domain is. See the examples for more information.
Click here to read more about hidden clocks, resets, and enables
Example
exposeSpecificClockResetEnable can only be used when it can find the
specified domain in r:
>>>reg = register @System 5 (reg + 1)>>>sig = exposeSpecificClockResetEnable @System reg clockGen resetGen enableGen>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig = exposeSpecificClockResetEnable@dom regclockGenresetGenenableGen
withSpecificClockResetEnable Source #
Arguments
| :: forall dom r. (KnownDomain dom, WithSpecificDomain dom r) | |
| => Clock dom | The |
| -> Reset dom | The |
| -> Enable dom | The |
| -> (HiddenClockResetEnable dom => r) | |
| -> r |
Connect an explicit Clock, Reset, and Enable to a function with
hidden Clock, Reset, and Enable arguments. This function can be used on
components with multiple domains. As opposed to withClockResetEnable,
callers should explicitly state what the domain is. See the examples for more
information.
Click here to read more about hidden clocks, resets, and enables
Example
withSpecificClockResetEnable can only be used when it can find the
specified domain in r:
>>>reg = register @System 5 (reg + 1)>>>sig = withSpecificClockResetEnable @System clockGen resetGen enableGen reg>>>sampleN 10 sig[5,5,6,7,8,9,10,11,12,13]
Type variables work too, if they are in scope. For example:
reg =register@dom 5 (reg + 1) sig =@domwithSpecificClockResetEnableclockGenresetGenenableGenreg
type SystemClockResetEnable = (Hidden (HiddenClockName System) (Clock System), Hidden (HiddenResetName System) (Reset System), Hidden (HiddenEnableName System) (Enable System)) Source #
A constraint that indicates the component needs a Clock, a Reset,
and an Enable belonging to the System domain.
Click here to read more about hidden clocks, resets, and enables
Basic circuit functions
dflipflop :: forall dom a. (HiddenClock dom, NFDataX a) => Signal dom a -> Signal dom a Source #
Special version of delay that doesn't take enable signals of any kind.
Initial value will be undefined.
Arguments
| :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) | |
| => a | Initial value |
| -> Signal dom a | Signal to delay |
| -> Signal dom a |
Arguments
| :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) | |
| => a | Initial value |
| -> Signal dom (Maybe a) | |
| -> Signal dom a |
Arguments
| :: forall dom a. (NFDataX a, HiddenClock dom, HiddenEnable dom) | |
| => a | Initial value |
| -> Signal dom Bool | Enable |
| -> Signal dom a | |
| -> Signal dom a |
Version of delay that only updates when its second argument is asserted.
>>>let input = fromList [1,2,3,4,5,6,7::Int]>>>let enable = fromList [True,True,False,False,True,True,True]>>>sampleN @System 7 (delayEn 0 enable input)[0,1,2,2,2,5,6]
Arguments
| :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) | |
| => a | Reset value. |
| -> Signal dom a | |
| -> Signal dom a |
Arguments
| :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) | |
| => a | Reset value. |
| -> Signal dom (Maybe a) | |
| -> Signal dom a |
Version of register that only updates its content when its second
argument is a Just value. So given:
sometimes1 = s where s =registerNothing (switch<$>s) switch Nothing = Just 1 switch _ = Nothing countSometimes = s where s =regMaybe0 (plusM (pure<$>s) sometimes1) plusM =liftA2(liftA2 (+))
We get:
>>>sampleN @System 9 sometimes1[Nothing,Nothing,Just 1,Nothing,Just 1,Nothing,Just 1,Nothing,Just 1]>>>sampleN @System 9 countSometimes[0,0,0,1,1,2,2,3,3]
Arguments
| :: forall dom a. (HiddenClockResetEnable dom, NFDataX a) | |
| => a | Reset value. |
| -> Signal dom Bool | |
| -> Signal dom a | |
| -> Signal dom a |
Version of register that only updates its content when its second argument
is asserted. So given:
oscillate =registerFalse (not<$>oscillate) count =regEn0 oscillate (count + 1)
We get:
>>>sampleN @System 9 oscillate[False,False,True,False,True,False,True,False,True]>>>sampleN @System 9 count[0,0,0,1,1,2,2,3,3]
mux :: Applicative f => f Bool -> f a -> f a -> f a Source #
Simulation and testbench functions
clockGen :: KnownDomain dom => Clock dom Source #
Clock generator for simulations. Do not use this clock generator for
the testBench function, use tbClockGen instead.
To be used like:
clkSystem = clockGen @System
See DomainConfiguration for more information on how to use synthesis domains.
resetGen :: forall dom. KnownDomain dom => Reset dom Source #
Arguments
| :: forall dom n. (KnownDomain dom, 1 <= n) | |
| => SNat n | Number of initial cycles to hold reset high |
| -> Reset dom |
Generate reset that's asserted for the first n cycles.
To be used like:
rstSystem5 = resetGen System (SNat 5)
Example usage:
>>>sampleN 7 (unsafeToHighPolarity (resetGenN @System (SNat @3)))[True,True,True,False,False,False,False]
systemClockGen :: Clock System Source #
Clock generator for the System clock domain.
NB: should only be used for simulation, and not for the testBench
function. For the testBench function, used tbSystemClockGen
systemResetGen :: Reset System Source #
Reset generator for the System clock domain.
NB: should only be used for simulation or the testBench function.
Example
topEntity :: Vec 2 (Vec 3 (Unsigned 8)) -> Vec 6 (Unsigned 8)
topEntity = concat
testBench :: Signal System Bool
testBench = done
where
testInput = pure ((1 :> 2 :> 3 :> Nil) :> (4 :> 5 :> 6 :> Nil) :> Nil)
expectedOutput = outputVerifier' ((1:>2:>3:>4:>5:>6:>Nil):>Nil)
done = exposeClockResetEnable (expectedOutput (topEntity $ testInput)) clk rst
clk = tbSystemClockGen (not <$> done)
rst = systemResetGen
Boolean connectives
Product/Signal isomorphism
Isomorphism between a Signal of a product type (e.g. a tuple) and a
product type of Signals.
Instances of Bundle must satisfy the following laws:
bundle.unbundle=idunbundle.bundle=id
By default, bundle and unbundle, are defined as the identity, that is,
writing:
data D = A | B instance Bundle D
is the same as:
data D = A | B instance Bundle D where typeUnbundledclk D =Signalclk Dbundles = sunbundles = s
For custom product types you'll have to write the instance manually:
data Pair a b = MkPair { getA :: a, getB :: b }
instance Bundle (Pair a b) where
type Unbundled dom (Pair a b) = Pair (Signal dom a) (Signal dom b)
-- bundle :: Pair (Signal dom a) (Signal dom b) -> Signal dom (Pair a b)
bundle (MkPair as bs) = MkPair $ as * bs
-- unbundle :: Signal dom (Pair a b) -> Pair (Signal dom a) (Signal dom b)
unbundle pairs = MkPair (getA $ pairs) (getB $ pairs)
Minimal complete definition
Nothing
Methods
bundle :: Unbundled dom a -> Signal dom a Source #
Example:
bundle :: (Signaldom a,Signaldom b) ->Signaldom (a,b)
However:
bundle ::SignaldomBit->SignaldomBit
Instances
| Bundle Bool Source # | |
| Bundle Double Source # | |
| Bundle Float Source # | |
| Bundle Int Source # | |
| Bundle Integer Source # | |
| Bundle () Source # | |
| Bundle Bit Source # | |
| Bundle EmptyTuple Source # | See commit 94b0bff5
and documentation for |
Defined in Clash.Signal.Bundle Associated Types type Unbundled dom EmptyTuple = (res :: Type) Source # Methods bundle :: forall (dom :: Domain). Unbundled dom EmptyTuple -> Signal dom EmptyTuple Source # unbundle :: forall (dom :: Domain). Signal dom EmptyTuple -> Unbundled dom EmptyTuple Source # | |
| Bundle (Maybe a) Source # | |
| Bundle (BitVector n) Source # | |
Defined in Clash.Signal.Bundle | |
| Bundle (Index n) Source # | |
| Bundle (Unsigned n) Source # | |
Defined in Clash.Signal.Bundle | |
| Bundle (Signed n) Source # | |
| Bundle (Either a b) Source # | |
Defined in Clash.Signal.Bundle | |
| Bundle (a1, a2) Source # | |
| KnownNat n => Bundle (Vec n a) Source # | |
| KnownNat d => Bundle (RTree d a) Source # | |
Defined in Clash.Signal.Bundle | |
| Bundle (a1, a2, a3) Source # | N.B.: The documentation only shows instances up to 3-tuples. By
default, instances up to and including 12-tuples will exist. If the flag
|
Defined in Clash.Signal.Bundle | |
| Bundle (Fixed rep int frac) Source # | |
Defined in Clash.Signal.Bundle | |
| Bundle ((f :*: g) a) Source # | |
Defined in Clash.Signal.Bundle | |
data EmptyTuple Source #
See TaggedEmptyTuple
Constructors
| EmptyTuple |
Instances
| Bundle EmptyTuple Source # | See commit 94b0bff5
and documentation for |
Defined in Clash.Signal.Bundle Associated Types type Unbundled dom EmptyTuple = (res :: Type) Source # Methods bundle :: forall (dom :: Domain). Unbundled dom EmptyTuple -> Signal dom EmptyTuple Source # unbundle :: forall (dom :: Domain). Signal dom EmptyTuple -> Unbundled dom EmptyTuple Source # | |
| Bundle EmptyTuple Source # | See commit 94b0bff5
and documentation for |
Defined in Clash.Signal.Delayed.Bundle Associated Types type Unbundled dom d EmptyTuple = (res :: Type) Source # Methods bundle :: forall (dom :: Domain) (d :: Nat). Unbundled dom d EmptyTuple -> DSignal dom d EmptyTuple Source # unbundle :: forall (dom :: Domain) (d :: Nat). DSignal dom d EmptyTuple -> Unbundled dom d EmptyTuple Source # | |
| type Unbundled dom EmptyTuple Source # | |
Defined in Clash.Signal.Bundle | |
| type Unbundled dom d EmptyTuple Source # | |
Defined in Clash.Signal.Delayed.Bundle | |
data TaggedEmptyTuple (dom :: Domain) Source #
Helper type to emulate the "old" behavior of Bundle's unit instance. I.e.,
the instance for Bundle () used to be defined as:
class Bundle () where bundle :: () -> Signal dom () unbundle :: Signal dom () -> ()
In order to have sensible type inference, the Bundle class specifies that
the argument type of bundle should uniquely identify the result type, and
vice versa for unbundle. The type signatures in the snippet above don't
though, as () doesn't uniquely map to a specific domain. In other words,
domain should occur in both the argument and result of both functions.
TaggedEmptyTuple tackles this by carrying the domain in its type. The
bundle and unbundle instance now looks like:
class Bundle EmptyTuple where bundle :: TaggedEmptyTuple dom -> Signal dom EmptyTuple unbundle :: Signal dom EmptyTuple -> TaggedEmptyTuple dom
dom is now mentioned both the argument and result for both bundle and
unbundle.
Constructors
| TaggedEmptyTuple |
Simulation functions (not synthesizable)
Arguments
| :: forall dom a b. (KnownDomain dom, NFDataX a, NFDataX b) | |
| => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) | Circuit to simulate, whose source potentially has a hidden clock, reset, and/or enable. |
| -> [a] | |
| -> [b] |
Simulate a (Signal a -> Signal b
>>>simulate @System (register 8) [1, 2, 3][8,1,2,3... ...
Where System denotes the domain to simulate on. The reset line is
asserted for a single cycle. The first value is therefore supplied twice to
the circuit: once while reset is high, and once directly after. The first
output value (the value produced while the reset is asserted) is dropped.
If you only want to simulate a finite number of samples, see simulateN. If
you need the reset line to be asserted for more than one cycle or if you
need a custom reset value, see simulateWithReset and simulateWithResetN.
NB: This function is not synthesizable
Arguments
| :: forall dom a b. (KnownDomain dom, Bundle a, Bundle b, NFDataX a, NFDataX b) | |
| => (HiddenClockResetEnable dom => Unbundled dom a -> Unbundled dom b) | Function we want to simulate, whose components potentially have a hidden clock (and reset) |
| -> [a] | |
| -> [b] |
Arguments
| :: forall dom a b. (KnownDomain dom, NFDataX a, NFDataX b) | |
| => Int | Number of cycles to simulate (excluding cycle spent in reset) |
| -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) |
|
| -> [a] | |
| -> [b] |
Same as simulate, but only sample the first Int output values.
NB: This function is not synthesizable
Arguments
| :: forall dom a b m. (KnownDomain dom, NFDataX a, NFDataX b, 1 <= m) | |
| => SNat m | Number of cycles to assert the reset |
| -> a | Reset value |
| -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) |
|
| -> [a] | |
| -> [b] |
Same as simulate, but with the reset line asserted for n cycles. Similar
to simulate, simulateWithReset will drop the output values produced while
the reset is asserted. While the reset is asserted, the reset value a is
supplied to the circuit.
Arguments
| :: forall dom a b m. (KnownDomain dom, NFDataX a, NFDataX b, 1 <= m) | |
| => SNat m | Number of cycles to assert the reset |
| -> a | Reset value |
| -> Int | Number of cycles to simulate (excluding cycles spent in reset) |
| -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) |
|
| -> [a] | |
| -> [b] |
Same as simulateWithReset, but only sample the first Int output values.
lazy versions
Arguments
| :: forall dom a b. KnownDomain dom | |
| => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) | Function we want to simulate, whose components potentially have a hidden clock (and reset) |
| -> [a] | |
| -> [b] |
Arguments
| :: forall dom a b. (KnownDomain dom, Bundle a, Bundle b) | |
| => (HiddenClockResetEnable dom => Unbundled dom a -> Unbundled dom b) | Function we want to simulate, whose components potentially have a hidden clock (and reset) |
| -> [a] | |
| -> [b] |
Automaton
signalAutomaton :: forall dom a b. KnownDomain dom => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b) -> Automaton (->) a b Source #
List <-> Signal conversion (not synthesizable)
Arguments
| :: forall dom a. (KnownDomain dom, NFDataX a) | |
| => (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Get an infinite list of samples from a Signal
The elements in the list correspond to the values of the Signal
at consecutive clock cycles
sample s == [s0, s1, s2, s3, ...
If the given component has not yet been given a clock, reset, or enable
line, sample will supply them. The reset will be asserted for a single
cycle. sample will not drop the value produced by the circuit while
the reset was asserted. If you want this, or if you want more than a
single cycle reset, consider using sampleWithReset.
NB: This function is not synthesizable
Arguments
| :: forall dom a. (KnownDomain dom, NFDataX a) | |
| => Int | Number of samples to produce |
| -> (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Get a list of n samples from a Signal
The elements in the list correspond to the values of the Signal
at consecutive clock cycles
sampleN @System 3 s == [s0, s1, s2]
If the given component has not yet been given a clock, reset, or enable
line, sampleN will supply them. The reset will be asserted for a single
cycle. sampleN will not drop the value produced by the circuit while
the reset was asserted. If you want this, or if you want more than a
single cycle reset, consider using sampleWithResetN.
NB: This function is not synthesizable
Arguments
| :: forall dom a m. (KnownDomain dom, NFDataX a, 1 <= m) | |
| => SNat m | Number of cycles to assert the reset |
| -> (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Get an infinite list of samples from a Signal, while asserting the reset
line for m clock cycles. sampleWithReset does not return the first m
cycles, i.e., when the reset is asserted.
NB: This function is not synthesizable
Arguments
| :: forall dom a m. (KnownDomain dom, NFDataX a, 1 <= m) | |
| => SNat m | Number of cycles to assert the reset |
| -> Int | Number of samples to produce |
| -> (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Get a list of n samples from a Signal, while asserting the reset line
for m clock cycles. sampleWithReset does not return the first m cycles,
i.e., while the reset is asserted.
NB: This function is not synthesizable
fromList :: NFDataX a => [a] -> Signal dom a Source #
Create a Signal from a list
Every element in the list will correspond to a value of the signal for one clock cycle.
>>>sampleN 2 (fromList [1,2,3,4,5])[1,2]
NB: This function is not synthesizable
fromListWithReset :: forall dom a. (HiddenReset dom, NFDataX a) => a -> [a] -> Signal dom a Source #
Like fromList, but resets on reset and has a defined reset value.
>>>let rst = unsafeFromHighPolarity (fromList [True, True, False, False, True, False])>>>let res = withReset rst (fromListWithReset Nothing [Just 'a', Just 'b', Just 'c'])>>>sampleN @System 6 res[Nothing,Nothing,Just 'a',Just 'b',Nothing,Just 'a']
NB: This function is not synthesizable
lazy versions
Arguments
| :: forall dom a. KnownDomain dom | |
| => (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Lazily get an infinite list of samples from a Signal
The elements in the list correspond to the values of the Signal
at consecutive clock cycles
sample s == [s0, s1, s2, s3, ...
If the given component has not yet been given a clock, reset, or enable
line, sample_lazy will supply them. The reset will be asserted for a
single cycle. sample_lazy will not drop the value produced by the
circuit while the reset was asserted.
NB: This function is not synthesizable
Arguments
| :: forall dom a. KnownDomain dom | |
| => Int | |
| -> (HiddenClockResetEnable dom => Signal dom a) |
|
| -> [a] |
Lazily get a list of n samples from a Signal
The elements in the list correspond to the values of the Signal
at consecutive clock cycles
sampleN @System 3 s == [s0, s1, s2]
If the given component has not yet been given a clock, reset, or enable
line, sampleN_lazy will supply them. The reset will be asserted for a
single cycle. sampleN_lazy will not drop the value produced by the
circuit while the reset was asserted.
NB: This function is not synthesizable
fromList_lazy :: [a] -> Signal dom a Source #
Create a Signal from a list
Every element in the list will correspond to a value of the signal for one clock cycle.
>>>sampleN 2 (fromList [1,2,3,4,5] :: Signal System Int)[1,2]
NB: This function is not synthesizable
QuickCheck combinators
Arguments
| :: KnownDomain dom | |
| => Int | The number of cycles we want to test for |
| -> (HiddenClockResetEnable dom => Signal dom Bool) |
|
| -> Property |
testFor n s tests the signal s for n cycles.
NB: This function is not synthesizable
Type classes
Eq-like
Ord-like
Bisignal functions
veryUnsafeToBiSignalIn :: (HasCallStack, KnownNat n, Given (SBiSignalDefault ds)) => BiSignalOut ds d n -> BiSignalIn ds d n Source #
Converts the out part of a BiSignal to an in part. In simulation it
checks whether multiple components are writing and will error accordingly.
Make sure this is only called ONCE for every BiSignal.
Arguments
| :: (HasCallStack, BitPack a) | |
| => BiSignalIn ds d (BitSize a) | A |
| -> Signal d a |
Read the value from an inout port
Arguments
| :: (HasCallStack, BitPack a) | |
| => BiSignalIn ds d (BitSize a) | |
| -> Signal d (Maybe a) | Value to write
|
| -> BiSignalOut ds d (BitSize a) |
Write to an inout port
mergeBiSignalOuts :: (HasCallStack, KnownNat n) => Vec n (BiSignalOut defaultState dom m) -> BiSignalOut defaultState dom m Source #
Combine several inout signals into one.
Internals
type HiddenClockName dom = AppendSymbol dom "_clk" Source #
type HiddenResetName dom = AppendSymbol dom "_rst" Source #
type HiddenEnableName dom = AppendSymbol dom "_en" Source #