Copyright	(C) 2015-2016 University of Twente 2017 Google Inc. 2019 Myrtle Software Ltd
License	BSD2 (see the file LICENSE)
Maintainer	Christiaan Baaij <christiaan.baaij@gmail.com>
Safe Haskell	Unsafe
Language	Haskell2010
Extensions	MonoLocalBinds ScopedTypeVariables BangPatterns ViewPatterns GADTs GADTSyntax DataKinds InstanceSigs StandaloneDeriving DeriveDataTypeable DeriveFunctor DeriveTraversable DeriveFoldable DeriveGeneric DefaultSignatures DeriveLift DerivingStrategies MagicHash KindSignatures TupleSections TypeOperators ExplicitNamespaces ExplicitForAll BinaryLiterals TypeApplications

Clash.Explicit.BlockRam.File

Contents

BlockRAM synchronized to an arbitrary clock
Internal

Description

Initializing a BlockRAM with a data file

BlockRAM primitives that can be initialized with a data file. The BNF grammar for this data file is simple:

FILE = LINE+
LINE = BIT+
BIT  = '0'
     | '1'

Consecutive LINEs correspond to consecutive memory addresses starting at 0. For example, a data file memory.bin containing the 9-bit unsigned number 7 to 13 looks like:

We can instantiate a BlockRAM using the content of the above file like so:

f
  :: Clock  dom
  -> Signal dom (Unsigned 3)
  -> Signal dom (Unsigned 9)
f clk rd = unpack <$> blockRamFile clk d7 "memory.bin" rd (signal Nothing)

In the example above, we basically treat the BlockRAM as an synchronous ROM. We can see that it works as expected:

>>> import qualified Data.List as L
>>> L.tail $ sampleN 4 $ f systemClockGen (fromList [3..5])
[10,11,12]

However, we can also interpret the same data as a tuple of a 6-bit unsigned number, and a 3-bit signed number:

g
  :: Clock  dom
  -> Signal dom (Unsigned 3)
  -> Signal dom (Unsigned 6,Signed 3)
g clk rd = unpack <$> blockRamFile clk d7 "memory.bin" rd (signal Nothing)

And then we would see:

>>> import qualified Data.List as L
>>> L.tail $ sampleN 4 $ g systemClockGen (fromList [3..5])
[(1,2),(1,3)(1,-4)]

Synopsis

blockRamFile :: (KnownDomain dom, KnownNat m, Enum addr, HasCallStack) => Clock dom -> Enable dom -> SNat n -> FilePath -> Signal dom addr -> Signal dom (Maybe (addr, BitVector m)) -> Signal dom (BitVector m)
blockRamFilePow2 :: forall dom n m. (KnownDomain dom, KnownNat m, KnownNat n, HasCallStack) => Clock dom -> Enable dom -> FilePath -> Signal dom (Unsigned n) -> Signal dom (Maybe (Unsigned n, BitVector m)) -> Signal dom (BitVector m)
blockRamFile# :: forall m dom n. (KnownDomain dom, KnownNat m, HasCallStack) => Clock dom -> Enable dom -> SNat n -> FilePath -> Signal dom Int -> Signal dom Bool -> Signal dom Int -> Signal dom (BitVector m) -> Signal dom (BitVector m)
initMem :: KnownNat n => FilePath -> IO [BitVector n]

BlockRAM synchronized to an arbitrary clock

blockRamFile Source #

Arguments

:: (KnownDomain dom, KnownNat m, Enum addr, HasCallStack)
=> Clock dom	`Clock` to synchronize to
-> Enable dom	Global enable
-> SNat n	Size of the blockRAM
-> FilePath	File describing the initial content of the blockRAM
-> Signal dom addr	Read address `r`
-> Signal dom (Maybe (addr, BitVector m))	(write address `w`, value to write)
-> Signal dom (BitVector m)	Value of the `blockRAM` at address `r` from the previous clock cycle

Create a blockRAM with space for n elements

NB: Read value is delayed by 1 cycle
NB: Initial output value is undefined

NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

               | VHDL     | Verilog  | SystemVerilog |
===============+==========+==========+===============+
Altera/Quartus | Broken   | Works    | Works         |
Xilinx/ISE     | Works    | Works    | Works         |
ASIC           | Untested | Untested | Untested      |
===============+==========+==========+===============+

Additional helpful information:

See Clash.Explicit.BlockRam for more information on how to use a Block RAM.
Use the adapter readNew for obtaining write-before-read semantics like this: readNew clk rst en (blockRamFile clk en size file) rd wrM.
See Clash.Explicit.BlockRam.File for more information on how to instantiate a Block RAM with the contents of a data file.
See Clash.Sized.Fixed for ideas on how to create your own data files.

blockRamFilePow2 Source #

Arguments

:: forall dom n m. (KnownDomain dom, KnownNat m, KnownNat n, HasCallStack)
=> Clock dom	`Clock` to synchronize to
-> Enable dom	Global enable
-> FilePath	File describing the initial content of the blockRAM
-> Signal dom (Unsigned n)	Read address `r`
-> Signal dom (Maybe (Unsigned n, BitVector m))	(write address `w`, value to write)
-> Signal dom (BitVector m)	Value of the `blockRAM` at address `r` from the previous clock cycle

Create a blockRAM with space for 2^n elements

NB: Read value is delayed by 1 cycle
NB: Initial output value is undefined

NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:

               | VHDL     | Verilog  | SystemVerilog |
===============+==========+==========+===============+
Altera/Quartus | Broken   | Works    | Works         |
Xilinx/ISE     | Works    | Works    | Works         |
ASIC           | Untested | Untested | Untested      |
===============+==========+==========+===============+

Additional helpful information:

See Clash.Prelude.BlockRam for more information on how to use a Block RAM.
Use the adapter readNew for obtaining write-before-read semantics like this: readNew clk rst en (blockRamFilePow2' clk en file) rd wrM.
See Clash.Explicit.BlockRam.File for more information on how to instantiate a Block RAM with the contents of a data file.
See Clash.Explicit.Fixed for ideas on how to create your own data files.

Internal

blockRamFile# Source #

Arguments

:: forall m dom n. (KnownDomain dom, KnownNat m, HasCallStack)
=> Clock dom	`Clock` to synchronize to
-> Enable dom	Global enable
-> SNat n	Size of the blockRAM
-> FilePath	File describing the initial content of the blockRAM
-> Signal dom Int	Read address `r`
-> Signal dom Bool	Write enable
-> Signal dom Int	Write address `w`
-> Signal dom (BitVector m)	Value to write (at address `w`)
-> Signal dom (BitVector m)	Value of the `blockRAM` at address `r` from the previous clock cycle

blockRamFile primitive

initMem :: KnownNat n => FilePath -> IO [BitVector n] Source #

NB: Not synthesizable