Documentation

Describes the parameters for a document.

See: newAssociationDescription smart constructor.

Create a value of AssociationDescription with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:alarmConfiguration:AssociationDescription', associationDescription_alarmConfiguration - Undocumented member.

$sel:applyOnlyAtCronInterval:AssociationDescription', associationDescription_applyOnlyAtCronInterval - By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.

$sel:associationId:AssociationDescription', associationDescription_associationId - The association ID.

$sel:associationName:AssociationDescription', associationDescription_associationName - The association name.

$sel:associationVersion:AssociationDescription', associationDescription_associationVersion - The association version.

$sel:automationTargetParameterName:AssociationDescription', associationDescription_automationTargetParameterName - Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of Amazon Web Services Systems Manager.

$sel:calendarNames:AssociationDescription', associationDescription_calendarNames - The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations only run when that change calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.

$sel:complianceSeverity:AssociationDescription', associationDescription_complianceSeverity - The severity level that is assigned to the association.

AssociationDescription, associationDescription_date - The date when the association was made.

$sel:documentVersion:AssociationDescription', associationDescription_documentVersion - The document version.

$sel:instanceId:AssociationDescription', associationDescription_instanceId - The managed node ID.

$sel:lastExecutionDate:AssociationDescription', associationDescription_lastExecutionDate - The date on which the association was last run.

$sel:lastSuccessfulExecutionDate:AssociationDescription', associationDescription_lastSuccessfulExecutionDate - The last date on which the association was successfully run.

$sel:lastUpdateAssociationDate:AssociationDescription', associationDescription_lastUpdateAssociationDate - The date when the association was last updated.

$sel:maxConcurrency:AssociationDescription', associationDescription_maxConcurrency - The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.

If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.

$sel:maxErrors:AssociationDescription', associationDescription_maxErrors - The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.

Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.

AssociationDescription, associationDescription_name - The name of the SSM document.

$sel:outputLocation:AssociationDescription', associationDescription_outputLocation - An S3 bucket where you want to store the output details of the request.

$sel:overview:AssociationDescription', associationDescription_overview - Information about the association.

$sel:parameters:AssociationDescription', associationDescription_parameters - A description of the parameters for a document.

$sel:scheduleExpression:AssociationDescription', associationDescription_scheduleExpression - A cron expression that specifies a schedule when the association runs.

$sel:scheduleOffset:AssociationDescription', associationDescription_scheduleOffset - Number of days to wait after the scheduled day to run an association.

AssociationDescription, associationDescription_status - The association status.

$sel:syncCompliance:AssociationDescription', associationDescription_syncCompliance - The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.

In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.

By default, all associations use AUTO mode.

$sel:targetLocations:AssociationDescription', associationDescription_targetLocations - The combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association.

$sel:targetMaps:AssociationDescription', associationDescription_targetMaps - A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.

$sel:targets:AssociationDescription', associationDescription_targets - The managed nodes targeted by the request.

$sel:triggeredAlarms:AssociationDescription', associationDescription_triggeredAlarms - The CloudWatch alarm that was invoked during the association.

Undocumented member.

By default, when you create a new associations, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter isn't supported for rate expressions.

The association ID.

The association name.

The association version.

Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of Amazon Web Services Systems Manager.

The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations only run when that change calendar is open. For more information, see Amazon Web Services Systems Manager Change Calendar.

The severity level that is assigned to the association.

The date when the association was made.

The document version.

The managed node ID.

The date on which the association was last run.

The last date on which the association was successfully run.

The date when the association was last updated.

The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.

If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency.

The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.

Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.

The name of the SSM document.

An S3 bucket where you want to store the output details of the request.

Information about the association.

A description of the parameters for a document.

A cron expression that specifies a schedule when the association runs.

Number of days to wait after the scheduled day to run an association.

The association status.

The mode for generating association compliance. You can specify AUTO or MANUAL. In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT. If the association execution doesn't run successfully, the association is NON-COMPLIANT.

In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API operation. In this case, compliance data isn't managed by State Manager, a capability of Amazon Web Services Systems Manager. It is managed by your direct call to the PutComplianceItems API operation.

By default, all associations use AUTO mode.

The combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the association.

A key-value mapping of document parameters to target resources. Both Targets and TargetMaps can't be specified together.

The managed nodes targeted by the request.

The CloudWatch alarm that was invoked during the association.