amazonka-medialive-2.0: Amazon Elemental MediaLive SDK.
Copyright(c) 2013-2023 Brendan Hay
LicenseMozilla Public License, v. 2.0.
MaintainerBrendan Hay
Stabilityauto-generated
Portabilitynon-portable (GHC extensions)
Safe HaskellSafe-Inferred
LanguageHaskell2010

Amazonka.MediaLive.Types.H265Settings

Description

 
Synopsis

Documentation

data H265Settings Source #

H265 Settings

See: newH265Settings smart constructor.

Constructors

H265Settings' 

Fields

  • adaptiveQuantization :: Maybe H265AdaptiveQuantization

    Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.

  • afdSignaling :: Maybe AfdSignaling

    Indicates that AFD values will be written into the output stream. If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.

  • alternativeTransferFunction :: Maybe H265AlternativeTransferFunction

    Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.

  • bitrate :: Maybe Natural

    Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.

  • bufSize :: Maybe Natural

    Size of buffer (HRD buffer model) in bits.

  • colorMetadata :: Maybe H265ColorMetadata

    Includes colorspace metadata in the output.

  • colorSpaceSettings :: Maybe H265ColorSpaceSettings

    Color Space settings

  • filterSettings :: Maybe H265FilterSettings

    Optional filters that you can apply to an encode.

  • fixedAfd :: Maybe FixedAfd

    Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to 'Fixed'.

  • flickerAq :: Maybe H265FlickerAq

    If set to enabled, adjust quantization within each frame to reduce flicker or 'pop' on I-frames.

  • gopClosedCadence :: Maybe Natural

    Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

  • gopSize :: Maybe Double

    GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.

  • gopSizeUnits :: Maybe H265GopSizeUnits

    Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.

  • level :: Maybe H265Level

    H.265 Level.

  • lookAheadRateControl :: Maybe H265LookAheadRateControl

    Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.

  • maxBitrate :: Maybe Natural

    For QVBR: See the tooltip for Quality level

  • minIInterval :: Maybe Natural

    Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1

  • parDenominator :: Maybe Natural

    Pixel Aspect Ratio denominator.

  • parNumerator :: Maybe Natural

    Pixel Aspect Ratio numerator.

  • profile :: Maybe H265Profile

    H.265 Profile.

  • qvbrQualityLevel :: Maybe Natural

    Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. Set values for the QVBR quality level field and Max bitrate field that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M

  • rateControlMode :: Maybe H265RateControlMode

    Rate control mode. QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth. CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates. Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.

  • scanType :: Maybe H265ScanType

    Sets the scan type of the output to progressive or top-field-first interlaced.

  • sceneChangeDetect :: Maybe H265SceneChangeDetect

    Scene change detection.

  • slices :: Maybe Natural

    Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.

  • tier :: Maybe H265Tier

    H.265 Tier.

  • timecodeBurninSettings :: Maybe TimecodeBurninSettings

    Timecode burn-in settings

  • timecodeInsertion :: Maybe H265TimecodeInsertionBehavior

    Determines how timecodes should be inserted into the video elementary stream. - 'disabled': Do not include timecodes - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config

  • framerateNumerator :: Natural

    Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.

  • framerateDenominator :: Natural

    Framerate denominator.

Instances

Instances details
FromJSON H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

ToJSON H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

Generic H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

Associated Types

type Rep H265Settings :: Type -> Type #

Read H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

Show H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

NFData H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

Methods

rnf :: H265Settings -> () #

Eq H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

Hashable H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

type Rep H265Settings Source # 
Instance details

Defined in Amazonka.MediaLive.Types.H265Settings

type Rep H265Settings = D1 ('MetaData "H265Settings" "Amazonka.MediaLive.Types.H265Settings" "amazonka-medialive-2.0-FK9HUAz0OmeIH2i6eRdod0" 'False) (C1 ('MetaCons "H265Settings'" 'PrefixI 'True) ((((S1 ('MetaSel ('Just "adaptiveQuantization") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265AdaptiveQuantization)) :*: (S1 ('MetaSel ('Just "afdSignaling") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe AfdSignaling)) :*: S1 ('MetaSel ('Just "alternativeTransferFunction") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265AlternativeTransferFunction)))) :*: ((S1 ('MetaSel ('Just "bitrate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "bufSize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural))) :*: (S1 ('MetaSel ('Just "colorMetadata") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265ColorMetadata)) :*: S1 ('MetaSel ('Just "colorSpaceSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265ColorSpaceSettings))))) :*: (((S1 ('MetaSel ('Just "filterSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265FilterSettings)) :*: S1 ('MetaSel ('Just "fixedAfd") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe FixedAfd))) :*: (S1 ('MetaSel ('Just "flickerAq") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265FlickerAq)) :*: S1 ('MetaSel ('Just "gopClosedCadence") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)))) :*: ((S1 ('MetaSel ('Just "gopSize") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Double)) :*: S1 ('MetaSel ('Just "gopSizeUnits") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265GopSizeUnits))) :*: (S1 ('MetaSel ('Just "level") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265Level)) :*: S1 ('MetaSel ('Just "lookAheadRateControl") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265LookAheadRateControl)))))) :*: (((S1 ('MetaSel ('Just "maxBitrate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: (S1 ('MetaSel ('Just "minIInterval") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "parDenominator") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)))) :*: ((S1 ('MetaSel ('Just "parNumerator") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "profile") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265Profile))) :*: (S1 ('MetaSel ('Just "qvbrQualityLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "rateControlMode") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265RateControlMode))))) :*: (((S1 ('MetaSel ('Just "scanType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265ScanType)) :*: S1 ('MetaSel ('Just "sceneChangeDetect") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265SceneChangeDetect))) :*: (S1 ('MetaSel ('Just "slices") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Natural)) :*: S1 ('MetaSel ('Just "tier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265Tier)))) :*: ((S1 ('MetaSel ('Just "timecodeBurninSettings") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe TimecodeBurninSettings)) :*: S1 ('MetaSel ('Just "timecodeInsertion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe H265TimecodeInsertionBehavior))) :*: (S1 ('MetaSel ('Just "framerateNumerator") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Natural) :*: S1 ('MetaSel ('Just "framerateDenominator") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Natural)))))))

newH265Settings Source #

Create a value of H265Settings with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:adaptiveQuantization:H265Settings', h265Settings_adaptiveQuantization - Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.

$sel:afdSignaling:H265Settings', h265Settings_afdSignaling - Indicates that AFD values will be written into the output stream. If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.

$sel:alternativeTransferFunction:H265Settings', h265Settings_alternativeTransferFunction - Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.

$sel:bitrate:H265Settings', h265Settings_bitrate - Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.

$sel:bufSize:H265Settings', h265Settings_bufSize - Size of buffer (HRD buffer model) in bits.

$sel:colorMetadata:H265Settings', h265Settings_colorMetadata - Includes colorspace metadata in the output.

$sel:colorSpaceSettings:H265Settings', h265Settings_colorSpaceSettings - Color Space settings

$sel:filterSettings:H265Settings', h265Settings_filterSettings - Optional filters that you can apply to an encode.

$sel:fixedAfd:H265Settings', h265Settings_fixedAfd - Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to 'Fixed'.

$sel:flickerAq:H265Settings', h265Settings_flickerAq - If set to enabled, adjust quantization within each frame to reduce flicker or 'pop' on I-frames.

$sel:gopClosedCadence:H265Settings', h265Settings_gopClosedCadence - Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

$sel:gopSize:H265Settings', h265Settings_gopSize - GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.

$sel:gopSizeUnits:H265Settings', h265Settings_gopSizeUnits - Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.

$sel:level:H265Settings', h265Settings_level - H.265 Level.

$sel:lookAheadRateControl:H265Settings', h265Settings_lookAheadRateControl - Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.

$sel:maxBitrate:H265Settings', h265Settings_maxBitrate - For QVBR: See the tooltip for Quality level

$sel:minIInterval:H265Settings', h265Settings_minIInterval - Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1

$sel:parDenominator:H265Settings', h265Settings_parDenominator - Pixel Aspect Ratio denominator.

$sel:parNumerator:H265Settings', h265Settings_parNumerator - Pixel Aspect Ratio numerator.

$sel:profile:H265Settings', h265Settings_profile - H.265 Profile.

$sel:qvbrQualityLevel:H265Settings', h265Settings_qvbrQualityLevel - Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. Set values for the QVBR quality level field and Max bitrate field that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M

$sel:rateControlMode:H265Settings', h265Settings_rateControlMode - Rate control mode. QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth. CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates. Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.

$sel:scanType:H265Settings', h265Settings_scanType - Sets the scan type of the output to progressive or top-field-first interlaced.

$sel:sceneChangeDetect:H265Settings', h265Settings_sceneChangeDetect - Scene change detection.

$sel:slices:H265Settings', h265Settings_slices - Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.

$sel:tier:H265Settings', h265Settings_tier - H.265 Tier.

$sel:timecodeBurninSettings:H265Settings', h265Settings_timecodeBurninSettings - Timecode burn-in settings

$sel:timecodeInsertion:H265Settings', h265Settings_timecodeInsertion - Determines how timecodes should be inserted into the video elementary stream. - 'disabled': Do not include timecodes - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config

$sel:framerateNumerator:H265Settings', h265Settings_framerateNumerator - Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.

$sel:framerateDenominator:H265Settings', h265Settings_framerateDenominator - Framerate denominator.

h265Settings_adaptiveQuantization :: Lens' H265Settings (Maybe H265AdaptiveQuantization) Source #

Adaptive quantization. Allows intra-frame quantizers to vary to improve visual quality.

h265Settings_afdSignaling :: Lens' H265Settings (Maybe AfdSignaling) Source #

Indicates that AFD values will be written into the output stream. If afdSignaling is "auto", the system will try to preserve the input AFD value (in cases where multiple AFD values are valid). If set to "fixed", the AFD value will be the value configured in the fixedAfd parameter.

h265Settings_alternativeTransferFunction :: Lens' H265Settings (Maybe H265AlternativeTransferFunction) Source #

Whether or not EML should insert an Alternative Transfer Function SEI message to support backwards compatibility with non-HDR decoders and displays.

h265Settings_bitrate :: Lens' H265Settings (Maybe Natural) Source #

Average bitrate in bits/second. Required when the rate control mode is VBR or CBR. Not used for QVBR. In an MS Smooth output group, each output must have a unique value when its bitrate is rounded down to the nearest multiple of 1000.

h265Settings_bufSize :: Lens' H265Settings (Maybe Natural) Source #

Size of buffer (HRD buffer model) in bits.

h265Settings_colorMetadata :: Lens' H265Settings (Maybe H265ColorMetadata) Source #

Includes colorspace metadata in the output.

h265Settings_filterSettings :: Lens' H265Settings (Maybe H265FilterSettings) Source #

Optional filters that you can apply to an encode.

h265Settings_fixedAfd :: Lens' H265Settings (Maybe FixedAfd) Source #

Four bit AFD value to write on all frames of video in the output stream. Only valid when afdSignaling is set to 'Fixed'.

h265Settings_flickerAq :: Lens' H265Settings (Maybe H265FlickerAq) Source #

If set to enabled, adjust quantization within each frame to reduce flicker or 'pop' on I-frames.

h265Settings_gopClosedCadence :: Lens' H265Settings (Maybe Natural) Source #

Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

h265Settings_gopSize :: Lens' H265Settings (Maybe Double) Source #

GOP size (keyframe interval) in units of either frames or seconds per gopSizeUnits. If gopSizeUnits is frames, gopSize must be an integer and must be greater than or equal to 1. If gopSizeUnits is seconds, gopSize must be greater than 0, but need not be an integer.

h265Settings_gopSizeUnits :: Lens' H265Settings (Maybe H265GopSizeUnits) Source #

Indicates if the gopSize is specified in frames or seconds. If seconds the system will convert the gopSize into a frame count at run time.

h265Settings_lookAheadRateControl :: Lens' H265Settings (Maybe H265LookAheadRateControl) Source #

Amount of lookahead. A value of low can decrease latency and memory usage, while high can produce better quality for certain content.

h265Settings_maxBitrate :: Lens' H265Settings (Maybe Natural) Source #

For QVBR: See the tooltip for Quality level

h265Settings_minIInterval :: Lens' H265Settings (Maybe Natural) Source #

Only meaningful if sceneChangeDetect is set to enabled. Defaults to 5 if multiplex rate control is used. Enforces separation between repeated (cadence) I-frames and I-frames inserted by Scene Change Detection. If a scene change I-frame is within I-interval frames of a cadence I-frame, the GOP is shrunk and/or stretched to the scene change I-frame. GOP stretch requires enabling lookahead as well as setting I-interval. The normal cadence resumes for the next GOP. Note: Maximum GOP stretch = GOP size + Min-I-interval - 1

h265Settings_parDenominator :: Lens' H265Settings (Maybe Natural) Source #

Pixel Aspect Ratio denominator.

h265Settings_qvbrQualityLevel :: Lens' H265Settings (Maybe Natural) Source #

Controls the target quality for the video encode. Applies only when the rate control mode is QVBR. Set values for the QVBR quality level field and Max bitrate field that suit your most important viewing devices. Recommended values are: - Primary screen: Quality level: 8 to 10. Max bitrate: 4M - PC or tablet: Quality level: 7. Max bitrate: 1.5M to 3M - Smartphone: Quality level: 6. Max bitrate: 1M to 1.5M

h265Settings_rateControlMode :: Lens' H265Settings (Maybe H265RateControlMode) Source #

Rate control mode. QVBR: Quality will match the specified quality level except when it is constrained by the maximum bitrate. Recommended if you or your viewers pay for bandwidth. CBR: Quality varies, depending on the video complexity. Recommended only if you distribute your assets to devices that cannot handle variable bitrates. Multiplex: This rate control mode is only supported (and is required) when the video is being delivered to a MediaLive Multiplex in which case the rate control configuration is controlled by the properties within the Multiplex Program.

h265Settings_scanType :: Lens' H265Settings (Maybe H265ScanType) Source #

Sets the scan type of the output to progressive or top-field-first interlaced.

h265Settings_slices :: Lens' H265Settings (Maybe Natural) Source #

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures. This field is optional; when no value is specified the encoder will choose the number of slices based on encode resolution.

h265Settings_timecodeInsertion :: Lens' H265Settings (Maybe H265TimecodeInsertionBehavior) Source #

Determines how timecodes should be inserted into the video elementary stream. - 'disabled': Do not include timecodes - 'picTimingSei': Pass through picture timing SEI messages from the source specified in Timecode Config

h265Settings_framerateNumerator :: Lens' H265Settings Natural Source #

Framerate numerator - framerate is a fraction, e.g. 24000 / 1001 = 23.976 fps.