The AdjacencyMap data type represents a graph by a map of vertices to their adjacency sets. We define a Num instance as a convenient notation for working with graphs:

0           == vertex 0
1 + 2       == overlay (vertex 1) (vertex 2)
1 * 2       == connect (vertex 1) (vertex 2)
1 + 2 * 3   == overlay (vertex 1) (connect (vertex 2) (vertex 3))
1 * (2 + 3) == connect (vertex 1) (overlay (vertex 2) (vertex 3))

Note: the Num instance does not satisfy several "customary laws" of Num, which dictate that fromInteger 0 and fromInteger 1 should act as additive and multiplicative identities, and negate as additive inverse. Nevertheless, overloading fromInteger, + and * is very convenient when working with algebraic graphs; we hope that in future Haskell's Prelude will provide a more fine-grained class hierarchy for algebraic structures, which we would be able to utilise without violating any laws.

The Show instance is defined using basic graph construction primitives:

show (empty     :: AdjacencyMap Int) == "empty"
show (1         :: AdjacencyMap Int) == "vertex 1"
show (1 + 2     :: AdjacencyMap Int) == "vertices [1,2]"
show (1 * 2     :: AdjacencyMap Int) == "edge 1 2"
show (1 * 2 * 3 :: AdjacencyMap Int) == "edges [(1,2),(1,3),(2,3)]"
show (1 * 2 + 3 :: AdjacencyMap Int) == "overlay (vertex 3) (edge 1 2)"

The Eq instance satisfies all axioms of algebraic graphs:

• overlay is commutative and associative:

        x + y == y + x
  x + (y + z) == (x + y) + z

• connect is associative and has empty as the identity:

    x * empty == x
    empty * x == x
  x * (y * z) == (x * y) * z

• connect distributes over overlay:

  x * (y + z) == x * y + x * z
  (x + y) * z == x * z + y * z

• connect can be decomposed:

  x * y * z == x * y + x * z + y * z

The following useful theorems can be proved from the above set of axioms.

• overlay has empty as the identity and is idempotent:

    x + empty == x
    empty + x == x
        x + x == x

• Absorption and saturation of connect:

  x * y + x + y == x * y
      x * x * x == x * x

When specifying the time and memory complexity of graph algorithms, n and m will denote the number of vertices and edges in the graph, respectively.

The total order on graphs is defined using size-lexicographic comparison:

• Compare the number of vertices. In case of a tie, continue.
• Compare the sets of vertices. In case of a tie, continue.
• Compare the number of edges. In case of a tie, continue.
• Compare the sets of edges.

Here are a few examples:

vertex 1 < vertex 2
vertex 3 < edge 1 2
vertex 1 < edge 1 1
edge 1 1 < edge 1 2
edge 1 2 < edge 1 1 + edge 2 2
edge 1 2 < edge 1 3

Note that the resulting order refines the isSubgraphOf relation and is compatible with overlay and connect operations:

isSubgraphOf x y ==> x <= y

empty <= x
x     <= x + y
x + y <= x * y

The adjacency map of a graph: each vertex is associated with a set of its direct successors. Complexity: O(1) time and memory.

adjacencyMap empty      == Map.empty
adjacencyMap (vertex x) == Map.singleton x Set.empty
adjacencyMap (edge 1 1) == Map.singleton 1 (Set.singleton 1)
adjacencyMap (edge 1 2) == Map.fromList [(1,Set.singleton 2), (2,Set.empty)]

Construct the empty graph. Complexity: O(1) time and memory.

isEmpty     empty == True
hasVertex x empty == False
vertexCount empty == 0
edgeCount   empty == 0

Construct the graph comprising a single isolated vertex. Complexity: O(1) time and memory.

isEmpty     (vertex x) == False
hasVertex x (vertex y) == (x == y)
vertexCount (vertex x) == 1
edgeCount   (vertex x) == 0

Construct the graph comprising a single edge. Complexity: O(1) time, memory.

edge x y               == connect (vertex x) (vertex y)
hasEdge x y (edge x y) == True
edgeCount   (edge x y) == 1
vertexCount (edge 1 1) == 1
vertexCount (edge 1 2) == 2

Overlay two graphs. This is a commutative, associative and idempotent operation with the identity empty. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

isEmpty     (overlay x y) == isEmpty   x   && isEmpty   y
hasVertex z (overlay x y) == hasVertex z x || hasVertex z y
vertexCount (overlay x y) >= vertexCount x
vertexCount (overlay x y) <= vertexCount x + vertexCount y
edgeCount   (overlay x y) >= edgeCount x
edgeCount   (overlay x y) <= edgeCount x   + edgeCount y
vertexCount (overlay 1 2) == 2
edgeCount   (overlay 1 2) == 0

Connect two graphs. This is an associative operation with the identity empty, which distributes over overlay and obeys the decomposition axiom. Complexity: O((n + m) * log(n)) time and O(n + m) memory. Note that the number of edges in the resulting graph is quadratic with respect to the number of vertices of the arguments: m = O(m1 + m2 + n1 * n2).

isEmpty     (connect x y) == isEmpty   x   && isEmpty   y
hasVertex z (connect x y) == hasVertex z x || hasVertex z y
vertexCount (connect x y) >= vertexCount x
vertexCount (connect x y) <= vertexCount x + vertexCount y
edgeCount   (connect x y) >= edgeCount x
edgeCount   (connect x y) >= edgeCount y
edgeCount   (connect x y) >= vertexCount x * vertexCount y
edgeCount   (connect x y) <= vertexCount x * vertexCount y + edgeCount x + edgeCount y
vertexCount (connect 1 2) == 2
edgeCount   (connect 1 2) == 1

Construct the graph comprising a given list of isolated vertices. Complexity: O(L * log(L)) time and O(L) memory, where L is the length of the given list.

vertices []            == empty
vertices [x]           == vertex x
hasVertex x . vertices == elem x
vertexCount . vertices == length . nub
vertexSet   . vertices == Set.fromList

Construct the graph from a list of edges. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

edges []          == empty
edges [(x,y)]     == edge x y
edges             == overlays . map (uncurry edge)
edgeCount . edges == length . nub
edgeList . edges  == nub . sort

Overlay a given list of graphs. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

overlays []        == empty
overlays [x]       == x
overlays [x,y]     == overlay x y
overlays           == foldr overlay empty
isEmpty . overlays == all isEmpty

Connect a given list of graphs. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

connects []        == empty
connects [x]       == x
connects [x,y]     == connect x y
connects           == foldr connect empty
isEmpty . connects == all isEmpty

The isSubgraphOf function takes two graphs and returns True if the first graph is a subgraph of the second. Complexity: O((n + m) * log(n)) time.

isSubgraphOf empty         x             ==  True
isSubgraphOf (vertex x)    empty         ==  False
isSubgraphOf x             (overlay x y) ==  True
isSubgraphOf (overlay x y) (connect x y) ==  True
isSubgraphOf (path xs)     (circuit xs)  ==  True
isSubgraphOf x y                         ==> x <= y

Check if a graph is empty. Complexity: O(1) time.

isEmpty empty                       == True
isEmpty (overlay empty empty)       == True
isEmpty (vertex x)                  == False
isEmpty (removeVertex x $ vertex x) == True
isEmpty (removeEdge x y $ edge x y) == False

Check if a graph contains a given vertex. Complexity: O(log(n)) time.

hasVertex x empty            == False
hasVertex x (vertex y)       == (x == y)
hasVertex x . removeVertex x == const False

Check if a graph contains a given edge. Complexity: O(log(n)) time.

hasEdge x y empty            == False
hasEdge x y (vertex z)       == False
hasEdge x y (edge x y)       == True
hasEdge x y . removeEdge x y == const False
hasEdge x y                  == elem (x,y) . edgeList

The number of vertices in a graph. Complexity: O(1) time.

vertexCount empty             ==  0
vertexCount (vertex x)        ==  1
vertexCount                   ==  length . vertexList
vertexCount x < vertexCount y ==> x < y

The number of edges in a graph. Complexity: O(n) time.

edgeCount empty      == 0
edgeCount (vertex x) == 0
edgeCount (edge x y) == 1
edgeCount            == length . edgeList

The sorted list of vertices of a given graph. Complexity: O(n) time and memory.

vertexList empty      == []
vertexList (vertex x) == [x]
vertexList . vertices == nub . sort

The sorted list of edges of a graph. Complexity: O(n + m) time and O(m) memory.

edgeList empty          == []
edgeList (vertex x)     == []
edgeList (edge x y)     == [(x,y)]
edgeList (star 2 [3,1]) == [(2,1), (2,3)]
edgeList . edges        == nub . sort
edgeList . transpose    == sort . map swap . edgeList

The sorted adjacency list of a graph. Complexity: O(n + m) time and O(m) memory.

adjacencyList empty          == []
adjacencyList (vertex x)     == [(x, [])]
adjacencyList (edge 1 2)     == [(1, [2]), (2, [])]
adjacencyList (star 2 [3,1]) == [(1, []), (2, [1,3]), (3, [])]
stars . adjacencyList        == id

The set of vertices of a given graph. Complexity: O(n) time and memory.

vertexSet empty      == Set.empty
vertexSet . vertex   == Set.singleton
vertexSet . vertices == Set.fromList

The set of edges of a given graph. Complexity: O((n + m) * log(m)) time and O(m) memory.

edgeSet empty      == Set.empty
edgeSet (vertex x) == Set.empty
edgeSet (edge x y) == Set.singleton (x,y)
edgeSet . edges    == Set.fromList

The preset of an element x is the set of its direct predecessors. Complexity: O(n * log(n)) time and O(n) memory.

preSet x empty      == Set.empty
preSet x (vertex x) == Set.empty
preSet 1 (edge 1 2) == Set.empty
preSet y (edge x y) == Set.fromList [x]

The postset of a vertex is the set of its direct successors. Complexity: O(log(n)) time and O(1) memory.

postSet x empty      == Set.empty
postSet x (vertex x) == Set.empty
postSet x (edge x y) == Set.fromList [y]
postSet 2 (edge 1 2) == Set.empty

The path on a list of vertices. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

path []        == empty
path [x]       == vertex x
path [x,y]     == edge x y
path . reverse == transpose . path

The circuit on a list of vertices. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

circuit []        == empty
circuit [x]       == edge x x
circuit [x,y]     == edges [(x,y), (y,x)]
circuit . reverse == transpose . circuit

The clique on a list of vertices. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

clique []         == empty
clique [x]        == vertex x
clique [x,y]      == edge x y
clique [x,y,z]    == edges [(x,y), (x,z), (y,z)]
clique (xs ++ ys) == connect (clique xs) (clique ys)
clique . reverse  == transpose . clique

The biclique on two lists of vertices. Complexity: O(n * log(n) + m) time and O(n + m) memory.

biclique []      []      == empty
biclique [x]     []      == vertex x
biclique []      [y]     == vertex y
biclique [x1,x2] [y1,y2] == edges [(x1,y1), (x1,y2), (x2,y1), (x2,y2)]
biclique xs      ys      == connect (vertices xs) (vertices ys)

The star formed by a centre vertex connected to a list of leaves. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

star x []    == vertex x
star x [y]   == edge x y
star x [y,z] == edges [(x,y), (x,z)]
star x ys    == connect (vertex x) (vertices ys)

The stars formed by overlaying a list of stars. An inverse of adjacencyList. Complexity: O(L * log(n)) time, memory and size, where L is the total size of the input.

stars []                      == empty
stars [(x, [])]               == vertex x
stars [(x, [y])]              == edge x y
stars [(x, ys)]               == star x ys
stars                         == overlays . map (uncurry star)
stars . adjacencyList         == id
overlay (stars xs) (stars ys) == stars (xs ++ ys)

Construct a graph from a list of adjacency sets; a variation of stars. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

fromAdjacencySets []                                  == empty
fromAdjacencySets [(x, Set.empty)]                    == vertex x
fromAdjacencySets [(x, Set.singleton y)]              == edge x y
fromAdjacencySets . map (fmap Set.fromList)           == stars
overlay (fromAdjacencySets xs) (fromAdjacencySets ys) == fromAdjacencySets (xs ++ ys)

The tree graph constructed from a given Tree data structure. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

tree (Node x [])                                         == vertex x
tree (Node x [Node y [Node z []]])                       == path [x,y,z]
tree (Node x [Node y [], Node z []])                     == star x [y,z]
tree (Node 1 [Node 2 [], Node 3 [Node 4 [], Node 5 []]]) == edges [(1,2), (1,3), (3,4), (3,5)]

The forest graph constructed from a given Forest data structure. Complexity: O((n + m) * log(n)) time and O(n + m) memory.

forest []                                                  == empty
forest [x]                                                 == tree x
forest [Node 1 [Node 2 [], Node 3 []], Node 4 [Node 5 []]] == edges [(1,2), (1,3), (4,5)]
forest                                                     == overlays . map tree

Remove a vertex from a given graph. Complexity: O(n*log(n)) time.

removeVertex x (vertex x)       == empty
removeVertex 1 (vertex 2)       == vertex 2
removeVertex x (edge x x)       == empty
removeVertex 1 (edge 1 2)       == vertex 2
removeVertex x . removeVertex x == removeVertex x

Remove an edge from a given graph. Complexity: O(log(n)) time.

removeEdge x y (edge x y)       == vertices [x,y]
removeEdge x y . removeEdge x y == removeEdge x y
removeEdge x y . removeVertex x == removeVertex x
removeEdge 1 1 (1 * 1 * 2 * 2)  == 1 * 2 * 2
removeEdge 1 2 (1 * 1 * 2 * 2)  == 1 * 1 + 2 * 2

The function replaceVertex x y replaces vertex x with vertex y in a given AdjacencyMap. If y already exists, x and y will be merged. Complexity: O((n + m) * log(n)) time.

replaceVertex x x            == id
replaceVertex x y (vertex x) == vertex y
replaceVertex x y            == mergeVertices (== x) y

Merge vertices satisfying a given predicate into a given vertex. Complexity: O((n + m) * log(n)) time, assuming that the predicate takes O(1) to be evaluated.

mergeVertices (const False) x    == id
mergeVertices (== x) y           == replaceVertex x y
mergeVertices even 1 (0 * 2)     == 1 * 1
mergeVertices odd  1 (3 + 4 * 5) == 4 * 1

Transpose a given graph. Complexity: O(m * log(n)) time, O(n + m) memory.

transpose empty       == empty
transpose (vertex x)  == vertex x
transpose (edge x y)  == edge y x
transpose . transpose == id
edgeList . transpose  == sort . map swap . edgeList

Transform a graph by applying a function to each of its vertices. This is similar to Functor's fmap but can be used with non-fully-parametric AdjacencyMap. Complexity: O((n + m) * log(n)) time.

gmap f empty      == empty
gmap f (vertex x) == vertex (f x)
gmap f (edge x y) == edge (f x) (f y)
gmap id           == id
gmap f . gmap g   == gmap (f . g)

Construct the induced subgraph of a given graph by removing the vertices that do not satisfy a given predicate. Complexity: O(n + m) time, assuming that the predicate takes O(1) to be evaluated.

induce (const True ) x      == x
induce (const False) x      == empty
induce (/= x)               == removeVertex x
induce p . induce q         == induce (\x -> p x && q x)
isSubgraphOf (induce p x) x == True

Construct the induced subgraph of a given graph by removing the vertices that are Nothing. Complexity: O(n + m) time.

induceJust (vertex Nothing)                               == empty
induceJust (edge (Just x) Nothing)                        == vertex x
induceJust . gmap Just                                    == id
induceJust . gmap (\x -> if p x then Just x else Nothing) == induce p

Left-to-right relational composition of graphs: vertices x and z are connected in the resulting graph if there is a vertex y, such that x is connected to y in the first graph, and y is connected to z in the second graph. There are no isolated vertices in the result. This operation is associative, has empty and single-vertex graphs as annihilating zeroes, and distributes over overlay. Complexity: O(n * m * log(n)) time and O(n + m) memory.

compose empty            x                == empty
compose x                empty            == empty
compose (vertex x)       y                == empty
compose x                (vertex y)       == empty
compose x                (compose y z)    == compose (compose x y) z
compose x                (overlay y z)    == overlay (compose x y) (compose x z)
compose (overlay x y)    z                == overlay (compose x z) (compose y z)
compose (edge x y)       (edge y z)       == edge x z
compose (path    [1..5]) (path    [1..5]) == edges [(1,3), (2,4), (3,5)]
compose (circuit [1..5]) (circuit [1..5]) == circuit [1,3,5,2,4]

Compute the Cartesian product of graphs. Complexity: O(n * m * log(n)^2) time.

box (path [0,1]) (path "ab") == edges [ ((0,'a'), (0,'b'))
                                      , ((0,'a'), (1,'a'))
                                      , ((0,'b'), (1,'b'))
                                      , ((1,'a'), (1,'b')) ]

Up to an isomorphism between the resulting vertex types, this operation is commutative, associative, distributes over overlay, has singleton graphs as identities and empty as the annihilating zero. Below ~~ stands for the equality up to an isomorphism, e.g. (x, ()) ~~ x.

box x y               ~~ box y x
box x (box y z)       ~~ box (box x y) z
box x (overlay y z)   == overlay (box x y) (box x z)
box x (vertex ())     ~~ x
box x empty           ~~ empty
transpose   (box x y) == box (transpose x) (transpose y)
vertexCount (box x y) == vertexCount x * vertexCount y
edgeCount   (box x y) <= vertexCount x * edgeCount y + edgeCount x * vertexCount y

Compute the reflexive and transitive closure of a graph. Complexity: O(n * m * log(n)^2) time.

closure empty           == empty
closure (vertex x)      == edge x x
closure (edge x x)      == edge x x
closure (edge x y)      == edges [(x,x), (x,y), (y,y)]
closure (path $ nub xs) == reflexiveClosure (clique $ nub xs)
closure                 == reflexiveClosure . transitiveClosure
closure                 == transitiveClosure . reflexiveClosure
closure . closure       == closure
postSet x (closure y)   == Set.fromList (reachable x y)

Compute the reflexive closure of a graph by adding a self-loop to every vertex. Complexity: O(n * log(n)) time.

reflexiveClosure empty              == empty
reflexiveClosure (vertex x)         == edge x x
reflexiveClosure (edge x x)         == edge x x
reflexiveClosure (edge x y)         == edges [(x,x), (x,y), (y,y)]
reflexiveClosure . reflexiveClosure == reflexiveClosure

Compute the symmetric closure of a graph by overlaying it with its own transpose. Complexity: O((n + m) * log(n)) time.

symmetricClosure empty              == empty
symmetricClosure (vertex x)         == vertex x
symmetricClosure (edge x y)         == edges [(x,y), (y,x)]
symmetricClosure x                  == overlay x (transpose x)
symmetricClosure . symmetricClosure == symmetricClosure

Compute the transitive closure of a graph. Complexity: O(n * m * log(n)^2) time.

transitiveClosure empty               == empty
transitiveClosure (vertex x)          == vertex x
transitiveClosure (edge x y)          == edge x y
transitiveClosure (path $ nub xs)     == clique (nub xs)
transitiveClosure . transitiveClosure == transitiveClosure

Check that the internal graph representation is consistent, i.e. that all edges refer to existing vertices. It should be impossible to create an inconsistent adjacency map, and we use this function in testing.

consistent empty         == True
consistent (vertex x)    == True
consistent (overlay x y) == True
consistent (connect x y) == True
consistent (edge x y)    == True
consistent (edges xs)    == True
consistent (stars xs)    == True