Changelog for Hastructure-0.50.0
Changelog for Hastructure
0.50.0
2025-07-14
- NEW: add
stopBy in run assumption ,which stop deal run by a list of Condition
- NEW: expose
asset level cashflow ,with a toggle
- NEW: expose
Un-Used Pool cashflow
- ENHANCE: parameterized the
tweaks
- ENHANCE: update dependency to accomodate publishment to
Hackage
- FIX: enable
Lease deal for Financial reports
0.46.4
2025-06-10
- ENHANCE: add error message when calculation IRR for bond with non cashflow
- ENHANCE: add
tweak: Stress Prepayment
- ENHANCE: add
stop: Bond Principal Loss Bond Interest Loss
0.46.2
2025-06-08
- ENHANCE: add
tweak: Balance Split and stop: Bond Met Target IRR
0.46.1
2025-06-07
- ENHANCE: add 2 more
leaseEndType assumptions: Earlier Later which will end the lease projection base on two input End date and extention times.
- ENHANCE: expose
new bond rate type in trigger effects. Now bond rate type can be changed during the projection.
- REFACTOR: with new refactor
root finder endpoint and signature. In the long term, the refactor of signature lays down fundation for deal structuring domain, now it would be easy to implement all kinds of structuring features.
0.45.7
2025-05-26
- ENHANCE: add
BaseByVec for vector-based rental change
0.45.5
2025-05-20
- NEW:
MaxSpread feature for structuring stage: get max possible bond coupon rate !
- ENHANCE: Transfer from
stack to cabal as build tool
- ENHANCE: Apply
DList to trigger log
- ENHANCE: Enable
Double Decline Balance in FixedAsset
- REFACTOR: Refactor
Leasing asset type
- Add
Default assumption
- Add
Period-based rental ,in addition to Day-based rental calculation
0.45.2
2025-04-01
- ENHANCE: Performance optimization by replace
List with DList.
- ENHANCE: In
inspection ,expose IsOutstanding HasPassedMaturity in Pre
0.45.1
2025-03-25
- FIX: in
Pricing/IRR, error when holding position is too small
- ENHANCE: engine will auto patch
interest start date for bonds if it is not modeled. In PreClosing status, engine will use closing date as bond interest begin date ; In Non-PreClosing status, it defaults to use last waterfall distribution date as bond interest begin date.
0.45.0
2025-03-21
- BREAK: remove unused
DealDates : FixInterval, CustomDates and PatternInterval. Since all these can be replace by new GenericDates in type DateDesp
- ENHANCE: now bond with
No last interest accure day will begin accrue interest from closing date if the deal is in PreClosing mode, while the bond will use last bond day otherwise.
- FIX:
IsPaidOff now can be queried in inspection formula
0.44.0
2025-03-11
- BREAK: Add
PAC PAC Anchor to BondGroup, now BondGroup is Map String L.Bond (Maybe PrinType)
- NEW: add formula
bondTargetBalance to query target amortized balance
- ENHANCE: expose
PAC Anchor which is same to PAC except that the balance schedule will be ineffective if Anchor Bonds are paid off.
0.43.0
2025-03-08
- NEW: new interest type
BalRef which bond will accrue its interest by a Formula, which is being used to model IO bond
- ENHANCE: in
FirstLoss ,the stress will be applied to revolving assumption as well
- FIX: add
interest accrued in bond pricing result
- BREAK: In waterfall ,the action
CalcBondInt now only accepts a list of bond names
- BREAK: asset modeling and analytics
lease has been refactored
0.42.10
2025-02-15
- NEW: expose new bond pricing : calculate IRR for
holding a bond, hold and sell a bond, or buy a bond.
- ENHANCE: lift
Pricing to expose error message.
- ENHANCE: change compare symbol in response from
GT to > and others as well.
- ENHANCE: auto patch
bond paid periods and pool collection periods for preClosing deal.
0.42.8
2025-02-13
- FIX: Enable
byTerm assumption on Installment
- FIX: cap the default rate vector with 100% geneated by
root.finder
- NEW: add
PeriodBased rate curve or balance curve in Pre, i.e. easy to build default rate trigger in structuring stage
0.42.4
2025-02-06
- NEW:
FirstLoss as new endpoint, which will stress on Default assumption till 0.01 loss on input tranche.
- NEW: New prepayment /default assumption via
byTerm, which vector curves are being applied via term of the assets.
0.42.3
2025-02-04
- NEW:
Multi-thread on pool cashflow projection
- NEW: Expose
convexity on bond/asset
- NEW: Add new prepayment assumption
PSA for Monthly mortgage
- NEW: Add new prepayment/default vector assumption based on asset origin term
0.42.1
2025-02-02
- NEW: add custom fee flow by
BondPaidPeriod PoolCollectedPeriod index
0.42.0
2025-02-01
- ENHANCE: refactor
calcPmt to boost 15x performance for mortgage cashflow projection.
- NEW: add
ScheduleByIndex for bonds
- FIX:
fundWith shall increase the bond balance
- ENHANCE: refactor Z-spread calc logic with numeric.root.finder
0.41.1
2025-01-11
- NEW:
Multi Interest Bond which used to model in bond with step up feature ( sub ordinated interest) in European
- NEW: new assumption ,which used to funding existing bond.
- NEW: new query
totalFunding for bond,which records all funding amount of bond.
- NEW: new query
AmountRequiredForIRR for bond,which return the amount to be paid out make bond met the target IRR.
- NEW: in
Rate Swap , the notional can be set by Formula
- ENHANCE: when account is being used as a source for
support, it has option to book ledger with both credit and debit direction.
- FIX:
payPrinBySeq was not paying out principal.
0.40.13
2024-12-17
- NEW: new formula
totalFunded for bond with extra funding amount
- NEW: new deal run assumption
FundBond, which records a time series funding amount for a single bond.
- ENHANCE: When booking account from
support action, now user can book on Credit or Debit side
- FIX:
payPrinBySeq was not working
0.40.9
2024-12-11
- ENHANCE: Ensure
limit always return positive ,otherwise engine will throw error
- NEW: add new action
changeStatus in waterfall, with optional Pre as condition to trigger the status change
0.40.6
2024-12-06
- NEW: new formula
ledgerBalanceBy, which return either Credit or Debit balance of a ledger
- FIX: step-up coupon bond which has a floater index will increase forever
- ENHANCE: refactor on
PDL book type.
0.40.1
2024-11-05
- NEW: break changes on API ,now the engine is able to throw out error message instead of just hanging.
0.31.0
2024-11-05
- NEW: new Call options assumption ,which specifies
dates to be tested
- ENHANCE: transform financial report to a
Tree from a Table
0.30.5
2024-11-02
- NEW: Expose bond factor formula for single bond
- FIX: Enable balanceSheet support for multiple pools
- FIX: Include logs from clean up waterfall
- FIX: Include logs from trigger/actions
- ENHANCE: query borrower number by Pool Id
- ENHANCE: query current pool balance by Pool Id
0.30.3
2024-10-20
- NEW: Expose combo sensitivity endpoint,
- NEW: Expose single clear ledger function
- NEW: Expose
writeoffBySeq which write a list of bonds by sequence.
- NEW: Add new assumption curve with padding last value to rest
- NEW: Expose extra Stress on ppy/def curve, use can impose time-series based stress on prepayment and default.
- NEW: Expose
transferMultiple, with one action transfer multiple account to single account
- ENHANCE: Expose pricing for bond groups
- ENHANCE: Instead of liquidating all pools but users now have the option to select pool to liquidate
- FIX: Revolve buy when building balance
- FIX: avoid duplicate run waterfall in call
0.28.21
2024-8-25
- ENHANCE: Expose pricing function with options of
include or not include accrued interest.
- NEW: Ballon Mortgage
- NEW: Expose Assumption: defaultAtEnd with rates
- NEW: Expose revolving buy asset from multiple pools
- NEW: Expose which waterfall is run at each payment date
0.28.16
2024-8-6
- FIX: correct
runPool cashflow order and add UT
0.28.15
2024-7-31
- FIX: enable compound formula on
weighted average formula.
0.28.14
2024-07-06
- FIX: enable
annualized rate fee type with formula bondbalance on bondGroup
0.28.13
2024-06-30
- NEW: new assumption
issue bond which allow funding by issuing new bonds during cashflow projection.
- NEW: new asset class
projectScheduleFlow which can be divided projected cashflow with fix portion and float portions. The interest from the float portion will be affected by interest rate assumption.
- ENHANCE: enable formula
bondRate/bondWaRate on bondGroup
- FIX:
formula will return inf if a divide with zero instead of just throw exception
- FIX:
financial reports was failing because it can't access to interest due on bond group.
- FIX: enable formula query on
bond groups
0.28.8
2024-06
- FIX:
limit on payFee was not working with duePct
- ENHANCE: expose
transaction statement for triggers
0.28.2
2024-05-27
- NEW: enable
trigger to run waterfall actions
- FIX: the
result log used to be doubled each pool collection period
- FIX:
payPrinResidual will use all cash from account regardless principal due of bonds, which may caused negative balance of bonds( cash of account > principal due of bond)
0.28.1
2024-05-26
- BREAK : add
bondGroup, which group bonds and pay with prorata/sequential/by coupon rate/by maturity/by start date
- BREAK : add
begin balance/accure interest/as of date for cashflow frame
- BREAK : add
interest arrears interest over interest on bond cashflow
- NEW: add
interest over interest settings on bonds and expose interest over interest interest due flow
- ENHANCE: add tabular representation of cashflow frame
- FIX: fix rolling default rate query
0.27.21
2024-05-15
- NEW: add
weekday <n> in the date pattern
- ENHANCE: expose
weekly /biweekly in Period
- NEW: now allow new
first N period without Fee feature to model cashflow of type Installment
- FIX: negative pool balance for (revolving pool asset >= 2)
0.27.13
2024-05-05
- ENHANCE: enable all
Combination Type formula (via patching dates)
- ENHANCE: add capability to query txn in (Fee/Bond/Account) via a
comment
0.27.12
2024-05-04
- ENHANCE: deal will return how it was ended in projection
0.27.11
2024-05-04
- NEW: Formula:
originalBondBalance,BondDuePrin
- NEW: Waterfall Action:
CalcBondPrin,PayPrinWithDue
- ENHANCE: fix Formula:
PoolFactor
- NEW: Enable
* between formulas
- FIX: Unlimit Liquidity Provider has wrong available balance
0.27.7
2024-05-01
- ENHANCE: Enable pricing on asset via a constant rate/rate curve; add
duration for asset pricing (curve only)
0.27.4
2024-04-15
- ENHANCE: Pool run: enhance multip-scenario run and mulitple-assets type run
- ENHANCE: Enable revovling on
Receivable
- ENHANCE: add
RecoveryByDays to Receivable ,which describes recovery cash received after default.
- FIX: Fix single asset run on
lease
- FIX: Failed to include cumulative stats on revolving buy assets
- FIX: Multi-asset run was failure due to including schedule cashflow run.
- ENHANCE: upgrade stack resolver from
lts-18.22 to lts-22.6
0.27.0
2024-04-01
- NEW: Now docker image ship with
Apple silicon chip ! Happy hacking Mac users !
0.26.2
2024-03-24
- FIX: patch recoveries for
Mortgage type cashflow
- NEW: add new asset class
Receivable which represent a invoice factored,trading receivable
- NEW:
DefaultAtEnd assumption, which assumes asset default at last payment(For Receivable)
0.26.1
2024-03-09
- NEW:
fundWith which will increate the balance of bond and deposit cash to account.
- NEW:
writeOff which will write off balance of bond via a formula
- NEW: a new predicate
passMaturity which True if bonds has passed their expected maturity/pay off date.
- NEW:
Not as composite boolean test.
- NEW: add new
OAS pricing assumption, which return OAS spread given input scenarios.
0.26.0
2024-02-27
- NEW: add
NO_FirstN as type of Mortgage which implies no payment for first N period and interest due will be capitalized.
- NEW: add
IO_FirstN as type of Mortgage which implies no principal payment for first N period.
- NEW: add
Make Whole Feature, which allow user to set a ,,<WAL/Spread> Table. The bond will be componsate with PV from spread determined by WAL remaining.
0.25.0
2024-02-16
- NEW: add
resec deal, which allow to use bonds as underlying assets and allow user to set assumption on underlying deals.
0.24.1
2023-12-17
- NEW: add
payIntBySeq which pay interest to bonds sequentially with optional limit
- NEW: add condition to "ExtraSupport" ,which support only available if a is satisfied
- NEW: add
Nothing to trigger effects
- NEW: add
payFeeBySeq to which pay a list of fees sequentially with optional limit
- NEW: add a fee type which due amount is X per pool collection period
- NEW: add a fee type which is a lookup table with look up value from a formula
- NEW: add override feature
rate and balance to calcDueInt action in waterfall.
- NEW: multiple pool support !! now engine support multiple pools in a deal with mixed assets.
- NEW: add query on
present value on schedule pool cashflow, which enable Yield Maitenance Overcollaterisaztion supports
0.23.1
2023-11-16
- NEW: new asset class
FixAsset type , which yield cashflow given a capacity and assumption called utilization rate curve. The new asset type is applicable to Hotel booking/EV Charge station/Solar Panel/Wind Power type.
- NEW: new rate hedge instrument
RateCap which yield cash if rateCurve is higher than a strike rate
- NEW: add
accruedInterest field in pool stats, which will be deducted from pool cash flow
- NEW: add
payPrinBySeq in waterfall action, now user can pay prin bond via a simple list.
- NEW: add an assumption
fireTrigger which mannualy fire a trigger at point of projection
- NEW: add pool collection type
totalCash will aggregate all pool cash field
- NEW:
payInt now accept a limit which constrain how much interset to be paid via a formula
- NEW: add
bookBy a ledger via formula
- NEW: add
I_P to Mortgage type ,which models Buy To Let type mortgage( interest only and principal at last period)
- ENHANCE: include
Lens and code clean up
- BREAK: refactor
StepUp out of interest part of bond.
0.22.2
2023-10-27
- ENHANCE: expose cumulative stats on pool cashflow returned by
runDeal
0.22.1
2023-10-26
- NEW: add
default by amount assumption, which enable user to set a total amount of default alongside with a vector.
- ENHANCE: misc refactors
0.22.0
2023-10-15
- BREAK: cashflow now with
Cumulative Stats ( cumulative default/delinq/loss/prepayment/principal/recovery)
- NEW: expose
inspect in waterfall action to observe variables during a waterfall execution
- NEW:
stepup now accpet a pre instead of a date to switch rate
- ENHANCE: auto patch
issuance balance for PreClosing Deal
- ENHANCE: implement
pre-run check and post-run check
- IssuanceBalance check :
Ongoing Deal shall have a IssuanceBalance value in Pool
- Interest Rate check : index required by deal should be found in assumption
- Waterfall action check : actions in waterfall ( source/target) should exist in deal object
- FIX: fix bug on
prepay penalty when using stepDown
- FIX: fix project cashflow for
Loan
0.21.5
2023-10-8
- ENHANCE: in the revolving buy , now buy amount is no longer a multipler of revolving assets face value
- FIX: now revolving asset may have remtain term == original term
0.21.4
2023-9-27
- ENHANCE: require a new status when defining a deal in
preClosing stage
- FIX: fix a bug when reading financial report logs
0.21.3
2023-9-26
- NEW: include a
default/delinq/loss status map when projecting cashflow
- NEW: implement
haircut as extra stress projecting mortgage
- ENHANCE: include
called deal status, which will be set when deal was triggered with a clean up call assumption
- ENHANCE: expose
runAsset endpoint
- ENHANCE: expose formula query on
deal status as well as trigger status
- ENHANCE: add
rampUp deal status
- FIX: adjust bond reset date from
cutoff date to closing date
0.21.1
2023-9-21
- BREAK: seperate
performance assumption
- BREAK: add
delinquency projection on mortgage as well as schedule mortgage cashflow
0.20.3
2023-9-4
- ENHANCE: now user can include boolean/int/balance/rate type query in
inspect field
0.20.2
2023-8-31
- BREAK: move
Trigger from list into a map with a name
- ENHANCE: add
CumulatiePoolDefaultedRateTill to query default rate as of collection period N , then support query last one,last two default rates in the past as a rolling basis..
- ENHANCE: add
queryBool with test logic of any or which will test all predicates or any predicates are/is satisfied. With new included aforementioned formula above, the engine can have a predicate like last 2 period cumulative defaulte rates are all lower than 5%, any last 2 period cumulative defaulte rates is higher than 5%
0.20.1
2023-8-29
- ENHANCE: add
LedgerTxnAmt , allow user to query transaction amount for a ledger by comment
- ENHANCE: expose
Abs in formula , which will get absolute value of another formula
0.20.0
2023-8-25
- BREAK: refactor
payInt and payFee which includes extraSupport from either another account or liquidation provider, with option to book PDL draw on ledger
- NEW: expose
Cumulative Net Loss Cumulative Net Loss Ratio Bond Rate Bond Weight Average Rate in formula
- NEW: expose
Avg in formula ,which can calculate average value from a list of deal stats.
- NEW: expose
RefRate in bond , now bond can be setup interest rate which reference to a value of deal , could be like 100% of Pool WAC coupon , or average of bond rate of bonds etc.
- ENHANCE: add
liquidity provider interest swap to balance sheet repot
- ENHANCE: add new bool query
is_most_senior_bond
- ENHANCE: add new balance query
PoolCurCollection returns target pool source balance in last collected period
- ENHANCE: refactor account transfer by
target reserve amount
0.19.15
2023-8-20
- ENHANCE: add
reserve account excess/gap to formula
- ENHANCE: refactor bond
step up coupon by date ,which pertains to Euro deals
- ENHANCE: add comments to souce code and prepare to release to
Hackage
0.19.12
2023-8-17
- NEW: Add
Step Up By Date /Cap/Floor coupon type for bond
- NEW: Add
Prepay Penalty attribute on Mortgage, penalty types includes:
rate0 before term N and rate1 after term N
- Fixed amount in lifetime or before
term N
- Fixed pct in life time or bfore
term N
- Sliding from
rate0 by step of rate1
- Ladder type like first
12 periods with Pct of Rate0 , next 12 periods with Pct of Rate1
- ENHANCE: refactor
liquidity provider
- include a maybe
valid date of the agreement
- include floater index
0.19.11
2023-8-14
- ENHANCE: add
calcAndPay action for fee
- ENHANCE: expose new assumption on expense projection
- ENHANCE: include a new
NO_IE type to generate dates vector
- FIX: Fix missing periods of
recurr type of fee
0.19.10
2023-8-7
- NEW : add a new expense type:
TargetBalanceFee, which due amount = <formula 1> - <formula 2>
- ENHANCE: add query total txn amount for account/bond/expense with optional
comment as a filter
- ENHANCE: expoese query on
cumulative pool on recoveries principal interest prepayment
- ENHANCE: expoese query on
beg balance on pool
0.19.8
2023-7-24
- ENHANCE: trancate payments records for bond with 0 balance and 0 due interest/due pricipal
0.19.7
2023-7-19
- ENHANCE: expose query on
cumulative pool recoveries
- ENHANCE: expose
factor in query
- ENHANCE: ensure principal payment is cap via bond oustanding balance
0.19.6
2023-7-18
- FIX: update PDL Ledger balance after
bookBy action
0.19.4
2023-7-17
- FIX: fix pricing error if bond flow size is 0
0.19.0
2023-7-1
- BREAK : seperate
payInt action and accrueInt action
- ENHANCE: optimize
Z-spread calculation
- ENHANCE: re arrange
deal.hs , break down code logic into seperate files.
- NEW: include
ledgers to accomodate PDL feature (Principal Deficiency Ledger)
- ENHANCE: expose
rounding on deal stats, which rounds interest rate change by a factor of fix amount ,or pay principal on balance by a factor of fix amount.
- ENAHNCE: expose
runDate endpoint as sandbox for user to play with <datePattern>
0.18.9
2023-6-23
- NEW : add
floorAndCap formula to set upper or lower bound of formula value
- NEW : add formula based fee rate for
pct and annual type of fee
0.18.1
2023-6-21
- NEW : Project cashflow for a list of asset, with performance assumption
- ENHANCE : Add
limit for revolving buy action
- ENHANCE : Add
default waterfall
- NEW : Add "IF-ELSE" in waterfall action
0.18.0
2023-6-8
- NEW "Major" : expose revolving assumption !
- NEW :
Pre now support comparing with a balance type formula ,not limited to a balance number
0.17.2
2023-5-24
- NEW: expose
exclude dates and offset by days
0.17.1
2023-5-21
- NEW: expose trigger status in
Inspect
0.17.0
2023-5-21
- NEW: expose
BalanceSheet Report and Cashflow Report, user can query them via set flags in assumption
- BREAK: normalized some account comments to be analysed when compling
Cashflow Report
0.16.0
2023-5-13
- NEW: expose bond with
Step-Up coupon feature
- BREAK:using
DatePattern to annotate reset date for floater bonds
- FIX: data query in the trigger
0.15.4
2023-5-6
- FIX: Fix cashflow projection logic for
Installment
- Include
DefaultedRecovery assumption for defaulted assets.
0.15
2023-5-1
- Introduce new asset :
AdjustRateMortgage with assumption:
- init period,first reset cap, periodic reset cap,lifetime cap, lifetime floor
- Docker hub will host each stable releases of Hastructure