vulkan-3.4: Bindings to the Vulkan graphics API.
Safe HaskellNone
LanguageHaskell2010

Vulkan.Core10.CommandBufferBuilding

Synopsis

Documentation

cmdBindPipeline Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer that the pipeline will be bound to.

-> PipelineBindPoint

pipelineBindPoint is a PipelineBindPoint value specifying whether to bind to the compute or graphics bind point. Binding one does not disturb the other.

-> Pipeline

pipeline is the pipeline to be bound.

-> io () 

vkCmdBindPipeline - Bind a pipeline object to a command buffer

Description

Once bound, a pipeline binding affects subsequent graphics or compute commands in the command buffer until a different pipeline is bound to the bind point. The pipeline bound to PIPELINE_BIND_POINT_COMPUTE controls the behavior of cmdDispatch and cmdDispatchIndirect. The pipeline bound to PIPELINE_BIND_POINT_GRAPHICS controls the behavior of all drawing commands. The pipeline bound to PIPELINE_BIND_POINT_RAY_TRACING_KHR controls the behavior of cmdTraceRaysKHR. No other commands are affected by the pipeline state.

Valid Usage

Valid Usage (Implicit)

  • pipelineBindPoint must be a valid PipelineBindPoint value
  • pipeline must be a valid Pipeline handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • Both of commandBuffer, and pipeline must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

CommandBuffer, Pipeline, PipelineBindPoint

cmdSetViewport Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("firstViewport" ::: Word32)

firstViewport is the index of the first viewport whose parameters are updated by the command.

-> ("viewports" ::: Vector Viewport)

pViewports is a pointer to an array of Viewport structures specifying viewport parameters.

-> io () 

vkCmdSetViewport - Set the viewport on a command buffer

Description

The viewport parameters taken from element i of pViewports replace the current state for the viewport index firstViewport + i, for i in [0, viewportCount).

Valid Usage

Valid Usage (Implicit)

  • pViewports must be a valid pointer to an array of viewportCount valid Viewport structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • viewportCount must be greater than 0

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer, Viewport

cmdSetScissor Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("firstScissor" ::: Word32)

firstScissor is the index of the first scissor whose state is updated by the command.

-> ("scissors" ::: Vector Rect2D)

pScissors is a pointer to an array of Rect2D structures defining scissor rectangles.

-> io () 

vkCmdSetScissor - Set the dynamic scissor rectangles on a command buffer

Description

The scissor rectangles taken from element i of pScissors replace the current state for the scissor index firstScissor + i, for i in [0, scissorCount).

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_SCISSOR set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

  • The sum of firstScissor and scissorCount must be between 1 and PhysicalDeviceLimits::maxViewports, inclusive
  • If the multiple viewports feature is not enabled, firstScissor must be 0
  • If the multiple viewports feature is not enabled, scissorCount must be 1
  • The x and y members of offset member of any element of pScissors must be greater than or equal to 0
  • Evaluation of (offset.x + extent.width) must not cause a signed integer addition overflow for any element of pScissors
  • Evaluation of (offset.y + extent.height) must not cause a signed integer addition overflow for any element of pScissors

Valid Usage (Implicit)

  • pScissors must be a valid pointer to an array of scissorCount Rect2D structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • scissorCount must be greater than 0

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer, Rect2D

cmdSetLineWidth Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("lineWidth" ::: Float)

lineWidth is the width of rasterized line segments.

-> io () 

vkCmdSetLineWidth - Set the dynamic line width state

Valid Usage

  • If the wide lines feature is not enabled, lineWidth must be 1.0

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer

cmdSetDepthBias Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("depthBiasConstantFactor" ::: Float)

depthBiasConstantFactor is a scalar factor controlling the constant depth value added to each fragment.

-> ("depthBiasClamp" ::: Float)

depthBiasClamp is the maximum (or minimum) depth bias of a fragment.

-> ("depthBiasSlopeFactor" ::: Float)

depthBiasSlopeFactor is a scalar factor applied to a fragment’s slope in depth bias calculations.

-> io () 

vkCmdSetDepthBias - Set the depth bias dynamic state

Description

If depthBiasEnable is FALSE, no depth bias is applied and the fragment’s depth values are unchanged.

depthBiasSlopeFactor scales the maximum depth slope of the polygon, and depthBiasConstantFactor scales an implementation-dependent constant that relates to the usable resolution of the depth buffer. The resulting values are summed to produce the depth bias value which is then clamped to a minimum or maximum value specified by depthBiasClamp. depthBiasSlopeFactor, depthBiasConstantFactor, and depthBiasClamp can each be positive, negative, or zero.

The maximum depth slope m of a triangle is

\[m = \sqrt{ \left({{\partial z_f} \over {\partial x_f}}\right)^2 + \left({{\partial z_f} \over {\partial y_f}}\right)^2}\]

where (xf, yf, zf) is a point on the triangle. m may be approximated as

\[m = \max\left( \left| { {\partial z_f} \over {\partial x_f} } \right|, \left| { {\partial z_f} \over {\partial y_f} } \right| \right).\]

The minimum resolvable difference r is an implementation-dependent parameter that depends on the depth buffer representation. It is the smallest difference in framebuffer coordinate z values that is guaranteed to remain distinct throughout polygon rasterization and in the depth buffer. All pairs of fragments generated by the rasterization of two polygons with otherwise identical vertices, but zf values that differ by r, will have distinct depth values.

For fixed-point depth buffer representations, r is constant throughout the range of the entire depth buffer. For floating-point depth buffers, there is no single minimum resolvable difference. In this case, the minimum resolvable difference for a given polygon is dependent on the maximum exponent, e, in the range of z values spanned by the primitive. If n is the number of bits in the floating-point mantissa, the minimum resolvable difference, r, for the given primitive is defined as

  • r = 2e-n

If a triangle is rasterized using the POLYGON_MODE_FILL_RECTANGLE_NV polygon mode, then this minimum resolvable difference may not be resolvable for samples outside of the triangle, where the depth is extrapolated.

If no depth buffer is present, r is undefined.

The bias value o for a polygon is

[begin{aligned} o &= mathrm{dbclamp}( m times mathtt{depthBiasSlopeFactor} + r times mathtt{depthBiasConstantFactor} ) -- text{where} &quad mathrm{dbclamp}(x) =

Command Buffer Levels | Render Pass Scope | Supported Queue Types | Pipeline Type | +============================================================================================================================+========================================================================================================================+=======================================================================================================================+=====================================================================================================================================+ | Primary | Both | Graphics | | | Secondary | | | | +----------------------------------------------------------------------------------------------------------------------------+------------------------------------------------------------------------------------------------------------------------+-----------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------+

See Also

CommandBuffer

cmdSetBlendConstants Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("blendConstants" ::: (Float, Float, Float, Float))

blendConstants is a pointer to an array of four values specifying the R, G, B, and A components of the blend constant color used in blending, depending on the blend factor.

-> io () 

vkCmdSetBlendConstants - Set the values of blend constants

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer

cmdSetDepthBounds Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("minDepthBounds" ::: Float)

minDepthBounds is the minimum depth bound.

-> ("maxDepthBounds" ::: Float)

maxDepthBounds is the maximum depth bound.

-> io () 

vkCmdSetDepthBounds - Set the depth bounds test values for a command buffer

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_DEPTH_BOUNDS set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage

  • Unless the VK_EXT_depth_range_unrestricted extension is enabled minDepthBounds must be between 0.0 and 1.0, inclusive
  • Unless the VK_EXT_depth_range_unrestricted extension is enabled maxDepthBounds must be between 0.0 and 1.0, inclusive

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer

cmdSetStencilCompareMask Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("faceMask" ::: StencilFaceFlags)

faceMask is a bitmask of StencilFaceFlagBits specifying the set of stencil state for which to update the compare mask.

-> ("compareMask" ::: Word32)

compareMask is the new value to use as the stencil compare mask.

-> io () 

vkCmdSetStencilCompareMask - Set the stencil compare mask dynamic state

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_STENCIL_COMPARE_MASK set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage (Implicit)

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer, StencilFaceFlags

cmdSetStencilWriteMask Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("faceMask" ::: StencilFaceFlags)

faceMask is a bitmask of StencilFaceFlagBits specifying the set of stencil state for which to update the write mask, as described above for cmdSetStencilCompareMask.

-> ("writeMask" ::: Word32)

writeMask is the new value to use as the stencil write mask.

-> io () 

vkCmdSetStencilWriteMask - Set the stencil write mask dynamic state

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_STENCIL_WRITE_MASK set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage (Implicit)

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer, StencilFaceFlags

cmdSetStencilReference Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("faceMask" ::: StencilFaceFlags)

faceMask is a bitmask of StencilFaceFlagBits specifying the set of stencil state for which to update the reference value, as described above for cmdSetStencilCompareMask.

-> ("reference" ::: Word32)

reference is the new value to use as the stencil reference value.

-> io () 

vkCmdSetStencilReference - Set the stencil reference dynamic state

Description

This command sets the state for a given draw when the graphics pipeline is created with DYNAMIC_STATE_STENCIL_REFERENCE set in PipelineDynamicStateCreateInfo::pDynamicStates.

Valid Usage (Implicit)

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

CommandBuffer, StencilFaceFlags

cmdBindDescriptorSets Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer that the descriptor sets will be bound to.

-> PipelineBindPoint

pipelineBindPoint is a PipelineBindPoint indicating whether the descriptors will be used by graphics pipelines or compute pipelines. There is a separate set of bind points for each of graphics and compute, so binding one does not disturb the other.

-> PipelineLayout

layout is a PipelineLayout object used to program the bindings.

-> ("firstSet" ::: Word32)

firstSet is the set number of the first descriptor set to be bound.

-> ("descriptorSets" ::: Vector DescriptorSet)

pDescriptorSets is a pointer to an array of handles to DescriptorSet objects describing the descriptor sets to write to.

-> ("dynamicOffsets" ::: Vector Word32)

pDynamicOffsets is a pointer to an array of uint32_t values specifying dynamic offsets.

-> io () 

vkCmdBindDescriptorSets - Binds descriptor sets to a command buffer

Description

cmdBindDescriptorSets causes the sets numbered [firstSet.. firstSet+descriptorSetCount-1] to use the bindings stored in pDescriptorSets[0..descriptorSetCount-1] for subsequent rendering commands (either compute or graphics, according to the pipelineBindPoint). Any bindings that were previously applied via these sets are no longer valid.

Once bound, a descriptor set affects rendering of subsequent graphics or compute commands in the command buffer until a different set is bound to the same set number, or else until the set is disturbed as described in Pipeline Layout Compatibility.

A compatible descriptor set must be bound for all set numbers that any shaders in a pipeline access, at the time that a draw or dispatch command is recorded to execute using that pipeline. However, if none of the shaders in a pipeline statically use any bindings with a particular set number, then no descriptor set need be bound for that set number, even if the pipeline layout includes a non-trivial descriptor set layout for that set number.

If any of the sets being bound include dynamic uniform or storage buffers, then pDynamicOffsets includes one element for each array element in each dynamic descriptor type binding in each set. Values are taken from pDynamicOffsets in an order such that all entries for set N come before set N+1; within a set, entries are ordered by the binding numbers in the descriptor set layouts; and within a binding array, elements are in order. dynamicOffsetCount must equal the total number of dynamic descriptors in the sets being bound.

The effective offset used for dynamic uniform and storage buffer bindings is the sum of the relative offset taken from pDynamicOffsets, and the base address of the buffer plus base offset in the descriptor set. The range of the dynamic uniform and storage buffer bindings is the buffer range as specified in the descriptor set.

Each of the pDescriptorSets must be compatible with the pipeline layout specified by layout. The layout used to program the bindings must also be compatible with the pipeline used in subsequent graphics or compute commands, as defined in the Pipeline Layout Compatibility section.

The descriptor set contents bound by a call to cmdBindDescriptorSets may be consumed at the following times:

  • For descriptor bindings created with the DESCRIPTOR_BINDING_UPDATE_AFTER_BIND_BIT bit set, the contents may be consumed when the command buffer is submitted to a queue, or during shader execution of the resulting draws and dispatches, or any time in between. Otherwise,
  • during host execution of the command, or during shader execution of the resulting draws and dispatches, or any time in between.

Thus, the contents of a descriptor set binding must not be altered (overwritten by an update command, or freed) between the first point in time that it may be consumed, and when the command completes executing on the queue.

The contents of pDynamicOffsets are consumed immediately during execution of cmdBindDescriptorSets. Once all pending uses have completed, it is legal to update and reuse a descriptor set.

Valid Usage

  • Each element of pDescriptorSets must have been allocated with a DescriptorSetLayout that matches (is the same as, or identically defined as) the DescriptorSetLayout at set n in layout, where n is the sum of firstSet and the index into pDescriptorSets
  • dynamicOffsetCount must be equal to the total number of dynamic descriptors in pDescriptorSets
  • The sum of firstSet and descriptorSetCount must be less than or equal to PipelineLayoutCreateInfo::setLayoutCount provided when layout was created
  • pipelineBindPoint must be supported by the commandBuffer’s parent CommandPool’s queue family
  • Each element of pDynamicOffsets which corresponds to a descriptor binding with type DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC must be a multiple of PhysicalDeviceLimits::minUniformBufferOffsetAlignment
  • Each element of pDynamicOffsets which corresponds to a descriptor binding with type DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC must be a multiple of PhysicalDeviceLimits::minStorageBufferOffsetAlignment
  • For each dynamic uniform or storage buffer binding in pDescriptorSets, the sum of the effective offset, as defined above, and the range of the binding must be less than or equal to the size of the buffer

Valid Usage (Implicit)

  • pipelineBindPoint must be a valid PipelineBindPoint value
  • layout must be a valid PipelineLayout handle
  • pDescriptorSets must be a valid pointer to an array of descriptorSetCount valid DescriptorSet handles
  • If dynamicOffsetCount is not 0, pDynamicOffsets must be a valid pointer to an array of dynamicOffsetCount uint32_t values
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • descriptorSetCount must be greater than 0
  • Each of commandBuffer, layout, and the elements of pDescriptorSets must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

CommandBuffer, DescriptorSet, PipelineBindPoint, PipelineLayout

cmdBindIndexBuffer Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> Buffer

buffer is the buffer being bound.

-> ("offset" ::: DeviceSize)

offset is the starting offset in bytes within buffer used in index buffer address calculations.

-> IndexType

indexType is a IndexType value specifying whether indices are treated as 16 bits or 32 bits.

-> io () 

vkCmdBindIndexBuffer - Bind an index buffer to a command buffer

Valid Usage

  • offset must be less than the size of buffer

Valid Usage (Implicit)

  • buffer must be a valid Buffer handle
  • indexType must be a valid IndexType value
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

Buffer, CommandBuffer, DeviceSize, IndexType

cmdBindVertexBuffers Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("firstBinding" ::: Word32)

firstBinding is the index of the first vertex input binding whose state is updated by the command.

-> ("buffers" ::: Vector Buffer)

pBuffers is a pointer to an array of buffer handles.

-> ("offsets" ::: Vector DeviceSize)

pOffsets is a pointer to an array of buffer offsets.

-> io () 

vkCmdBindVertexBuffers - Bind vertex buffers to a command buffer

Description

The values taken from elements i of pBuffers and pOffsets replace the current state for the vertex input binding firstBinding + i, for i in [0, bindingCount). The vertex input binding is updated to start at the offset indicated by pOffsets[i] from the start of the buffer pBuffers[i]. All vertex input attributes that use each of these bindings will use these updated addresses in their address calculations for subsequent draw commands. If the nullDescriptor feature is enabled, elements of pBuffers can be NULL_HANDLE, and can be used by the vertex shader. If a vertex input attribute is bound to a vertex input binding that is NULL_HANDLE, the values taken from memory are considered to be zero, and missing G, B, or A components are filled with (0,0,1).

Valid Usage

  • The sum of firstBinding and bindingCount must be less than or equal to PhysicalDeviceLimits::maxVertexInputBindings
  • All elements of pOffsets must be less than the size of the corresponding element in pBuffers
  • All elements of pBuffers must have been created with the BUFFER_USAGE_VERTEX_BUFFER_BIT flag
  • Each element of pBuffers that is non-sparse must be bound completely and contiguously to a single DeviceMemory object
  • If the nullDescriptor feature is not enabled, all elements of pBuffers must not be NULL_HANDLE
  • If an element of pBuffers is NULL_HANDLE, then the corresponding element of pOffsets must be zero

Valid Usage (Implicit)

  • pBuffers must be a valid pointer to an array of bindingCount valid or NULL_HANDLE Buffer handles
  • pOffsets must be a valid pointer to an array of bindingCount DeviceSize values
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • bindingCount must be greater than 0
  • Both of commandBuffer, and the elements of pBuffers that are valid handles of non-ignored parameters must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics

See Also

Buffer, CommandBuffer, DeviceSize

cmdDraw Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("vertexCount" ::: Word32)

vertexCount is the number of vertices to draw.

-> ("instanceCount" ::: Word32)

instanceCount is the number of instances to draw.

-> ("firstVertex" ::: Word32)

firstVertex is the index of the first vertex to draw.

-> ("firstInstance" ::: Word32)

firstInstance is the instance ID of the first instance to draw.

-> io () 

vkCmdDraw - Draw primitives

Description

When the command is executed, primitives are assembled using the current primitive topology and vertexCount consecutive vertex indices with the first vertexIndex value equal to firstVertex. The primitives are drawn instanceCount times with instanceIndex starting with firstInstance and increasing sequentially for each instance. The assembled primitives execute the bound graphics pipeline.

Valid Usage

  • If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
  • If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
  • Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
  • Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
  • Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
  • For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
  • For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
  • Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
  • A valid pipeline must be bound to the pipeline bind point used by this command
  • If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
  • There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
  • The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
  • The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
  • Every input attachment used by the current subpass must be bound to the pipeline via a descriptor set
  • Image subresources used as attachments in the current render pass must not be accessed in any way other than as an attachment by this command
  • If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
  • If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
  • If commandBuffer is a protected command buffer, any resource written to by the Pipeline object bound to the pipeline bind point used by this command must not be an unprotected resource
  • If commandBuffer is a protected command buffer, pipeline stages other than the framebuffer-space and compute stages in the Pipeline object bound to the pipeline bind point must not write to any resource
  • All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or NULL_HANDLE buffers bound
  • If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be NULL_HANDLE
  • For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in ???

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Inside Graphics Graphics

See Also

CommandBuffer

cmdDrawIndexed Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("indexCount" ::: Word32)

indexCount is the number of vertices to draw.

-> ("instanceCount" ::: Word32)

instanceCount is the number of instances to draw.

-> ("firstIndex" ::: Word32)

firstIndex is the base index within the index buffer.

-> ("vertexOffset" ::: Int32)

vertexOffset is the value added to the vertex index before indexing into the vertex buffer.

-> ("firstInstance" ::: Word32)

firstInstance is the instance ID of the first instance to draw.

-> io () 

vkCmdDrawIndexed - Issue an indexed draw into a command buffer

Description

When the command is executed, primitives are assembled using the current primitive topology and indexCount vertices whose indices are retrieved from the index buffer. The index buffer is treated as an array of tightly packed unsigned integers of size defined by the cmdBindIndexBuffer::indexType parameter with which the buffer was bound.

The first vertex index is at an offset of firstIndex * indexSize + offset within the bound index buffer, where offset is the offset specified by cmdBindIndexBuffer and indexSize is the byte size of the type specified by indexType. Subsequent index values are retrieved from consecutive locations in the index buffer. Indices are first compared to the primitive restart value, then zero extended to 32 bits (if the indexType is INDEX_TYPE_UINT8_EXT or INDEX_TYPE_UINT16) and have vertexOffset added to them, before being supplied as the vertexIndex value.

The primitives are drawn instanceCount times with instanceIndex starting with firstInstance and increasing sequentially for each instance. The assembled primitives execute the bound graphics pipeline.

Valid Usage

  • If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
  • If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
  • Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
  • Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
  • Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
  • For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
  • For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
  • Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
  • A valid pipeline must be bound to the pipeline bind point used by this command
  • If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
  • There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
  • The current render pass must be compatible with the renderPass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
  • The subpass index of the current render pass must be equal to the subpass member of the GraphicsPipelineCreateInfo structure specified when creating the Pipeline bound to PIPELINE_BIND_POINT_GRAPHICS
  • Every input attachment used by the current subpass must be bound to the pipeline via a descriptor set
  • Image subresources used as attachments in the current render pass must not be accessed in any way other than as an attachment by this command
  • If the draw is recorded in a render pass instance with multiview enabled, the maximum instance index must be less than or equal to PhysicalDeviceMultiviewProperties::maxMultiviewInstanceIndex
  • If the bound graphics pipeline was created with PipelineSampleLocationsStateCreateInfoEXT::sampleLocationsEnable set to TRUE and the current subpass has a depth/stencil attachment, then that attachment must have been created with the IMAGE_CREATE_SAMPLE_LOCATIONS_COMPATIBLE_DEPTH_BIT_EXT bit set
  • If commandBuffer is a protected command buffer, any resource written to by the Pipeline object bound to the pipeline bind point used by this command must not be an unprotected resource
  • If commandBuffer is a protected command buffer, pipeline stages other than the framebuffer-space and compute stages in the Pipeline object bound to the pipeline bind point must not write to any resource
  • All vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must have either valid or NULL_HANDLE buffers bound
  • If the nullDescriptor feature is not enabled, all vertex input bindings accessed via vertex input variables declared in the vertex shader entry point’s interface must not be NULL_HANDLE
  • For a given vertex buffer binding, any attribute data fetched must be entirely contained within the corresponding vertex buffer binding, as described in ???
  • (indexSize * (firstIndex + indexCount) + offset) must be less than or equal to the size of the bound index buffer, with indexSize being based on the type specified by indexType, where the index buffer, indexType, and offset are specified via cmdBindIndexBuffer

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Inside Graphics Graphics

See Also

CommandBuffer

cmdDrawIndirect Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> Buffer

buffer is the buffer containing draw parameters.

-> ("offset" ::: DeviceSize)

offset is the byte offset into buffer where parameters begin.

-> ("drawCount" ::: Word32)

drawCount is the number of draws to execute, and can be zero.

-> ("stride" ::: Word32)

stride is the byte stride between successive sets of draw parameters.

-> io () 

vkCmdDrawIndirect - Issue an indirect draw into a command buffer

Description

cmdDrawIndirect behaves similarly to cmdDraw except that the parameters are read by the device from a buffer during execution. drawCount draws are executed by the command, with parameters taken from buffer starting at offset and increasing by stride bytes for each successive draw. The parameters of each draw are encoded in an array of DrawIndirectCommand structures. If drawCount is less than or equal to one, stride is ignored.

Valid Usage

Valid Usage (Implicit)

  • buffer must be a valid Buffer handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance
  • Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Inside Graphics Graphics

See Also

Buffer, CommandBuffer, DeviceSize

cmdDrawIndexedIndirect Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> Buffer

buffer is the buffer containing draw parameters.

-> ("offset" ::: DeviceSize)

offset is the byte offset into buffer where parameters begin.

-> ("drawCount" ::: Word32)

drawCount is the number of draws to execute, and can be zero.

-> ("stride" ::: Word32)

stride is the byte stride between successive sets of draw parameters.

-> io () 

vkCmdDrawIndexedIndirect - Perform an indexed indirect draw

Description

cmdDrawIndexedIndirect behaves similarly to cmdDrawIndexed except that the parameters are read by the device from a buffer during execution. drawCount draws are executed by the command, with parameters taken from buffer starting at offset and increasing by stride bytes for each successive draw. The parameters of each draw are encoded in an array of DrawIndexedIndirectCommand structures. If drawCount is less than or equal to one, stride is ignored.

Valid Usage

Valid Usage (Implicit)

  • buffer must be a valid Buffer handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance
  • Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Inside Graphics Graphics

See Also

Buffer, CommandBuffer, DeviceSize

cmdDispatch Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("groupCountX" ::: Word32)

groupCountX is the number of local workgroups to dispatch in the X dimension.

-> ("groupCountY" ::: Word32)

groupCountY is the number of local workgroups to dispatch in the Y dimension.

-> ("groupCountZ" ::: Word32)

groupCountZ is the number of local workgroups to dispatch in the Z dimension.

-> io () 

vkCmdDispatch - Dispatch compute work items

Description

When the command is executed, a global workgroup consisting of groupCountX × groupCountY × groupCountZ local workgroups is assembled.

Valid Usage

  • If a ImageView is accessed using atomic operations as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_STORAGE_IMAGE_ATOMIC_BIT
  • If a ImageView is sampled with FILTER_CUBIC_EXT as a result of this command, then the image view’s format features must contain FORMAT_FEATURE_SAMPLED_IMAGE_FILTER_CUBIC_BIT_EXT
  • Any ImageView being sampled with FILTER_CUBIC_EXT as a result of this command must have a ImageViewType and format that supports cubic filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubic returned by getPhysicalDeviceImageFormatProperties2
  • Any ImageView being sampled with FILTER_CUBIC_EXT with a reduction mode of either SAMPLER_REDUCTION_MODE_MIN or SAMPLER_REDUCTION_MODE_MAX as a result of this command must have a ImageViewType and format that supports cubic filtering together with minmax filtering, as specified by FilterCubicImageViewImageFormatPropertiesEXT::filterCubicMinmax returned by getPhysicalDeviceImageFormatProperties2
  • Any Image created with a ImageCreateInfo::flags containing IMAGE_CREATE_CORNER_SAMPLED_BIT_NV sampled as a result of this command must only be sampled using a SamplerAddressMode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE
  • For each set n that is statically used by the Pipeline bound to the pipeline bind point used by this command, a descriptor set must have been bound to n at the same pipeline bind point, with a PipelineLayout that is compatible for set n, with the PipelineLayout used to create the current Pipeline, as described in ???
  • For each push constant that is statically used by the Pipeline bound to the pipeline bind point used by this command, a push constant value must have been set for the same pipeline bind point, with a PipelineLayout that is compatible for push constants, with the PipelineLayout used to create the current Pipeline, as described in ???
  • Descriptors in each bound descriptor set, specified via cmdBindDescriptorSets, must be valid if they are statically used by the Pipeline bound to the pipeline bind point used by this command
  • A valid pipeline must be bound to the pipeline bind point used by this command
  • If the Pipeline object bound to the pipeline bind point used by this command requires any dynamic state, that state must have been set for commandBuffer, and done so after any previously bound pipeline with the corresponding state not specified as dynamic
  • There must not have been any calls to dynamic state setting commands for any state not specified as dynamic in the Pipeline object bound to the pipeline bind point used by this command, since that pipeline was bound
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used to sample from any Image with a ImageView of the type IMAGE_VIEW_TYPE_3D, IMAGE_VIEW_TYPE_CUBE, IMAGE_VIEW_TYPE_1D_ARRAY, IMAGE_VIEW_TYPE_2D_ARRAY or IMAGE_VIEW_TYPE_CUBE_ARRAY, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions with ImplicitLod, Dref or Proj in their name, in any shader stage
  • If the Pipeline object bound to the pipeline bind point used by this command accesses a Sampler object that uses unnormalized coordinates, that sampler must not be used with any of the SPIR-V OpImageSample* or OpImageSparseSample* instructions that includes a LOD bias or any offset values, in any shader stage
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a uniform buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If the robust buffer access feature is not enabled, and if the Pipeline object bound to the pipeline bind point used by this command accesses a storage buffer, it must not access values outside of the range of the buffer as specified in the descriptor set bound to the same pipeline bind point
  • If commandBuffer is an unprotected command buffer, any resource accessed by the Pipeline object bound to the pipeline bind point used by this command must not be a protected resource
  • If commandBuffer is a protected command buffer, any resource written to by the Pipeline object bound to the pipeline bind point used by this command must not be an unprotected resource
  • If commandBuffer is a protected command buffer, pipeline stages other than the framebuffer-space and compute stages in the Pipeline object bound to the pipeline bind point must not write to any resource
  • groupCountX must be less than or equal to PhysicalDeviceLimits::maxComputeWorkGroupCount[0]
  • groupCountY must be less than or equal to PhysicalDeviceLimits::maxComputeWorkGroupCount[1]
  • groupCountZ must be less than or equal to PhysicalDeviceLimits::maxComputeWorkGroupCount[2]

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support compute operations
  • This command must only be called outside of a render pass instance

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Compute Compute

See Also

CommandBuffer

cmdDispatchIndirect Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> Buffer

buffer is the buffer containing dispatch parameters.

-> ("offset" ::: DeviceSize)

offset is the byte offset into buffer where parameters begin.

-> io () 

vkCmdDispatchIndirect - Dispatch compute work items using indirect parameters

Description

cmdDispatchIndirect behaves similarly to cmdDispatch except that the parameters are read by the device from a buffer during execution. The parameters of the dispatch are encoded in a DispatchIndirectCommand structure taken from buffer starting at offset.

Valid Usage

Valid Usage (Implicit)

  • buffer must be a valid Buffer handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support compute operations
  • This command must only be called outside of a render pass instance
  • Both of buffer, and commandBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Compute Compute

See Also

Buffer, CommandBuffer, DeviceSize

cmdCopyBuffer Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcBuffer" ::: Buffer)

srcBuffer is the source buffer.

-> ("dstBuffer" ::: Buffer)

dstBuffer is the destination buffer.

-> ("regions" ::: Vector BufferCopy)

pRegions is a pointer to an array of BufferCopy structures specifying the regions to copy.

-> io () 

vkCmdCopyBuffer - Copy data between buffer regions

Description

Each region in pRegions is copied from the source buffer to the same region of the destination buffer. srcBuffer and dstBuffer can be the same buffer or alias the same memory, but the resulting values are undefined if the copy regions overlap in memory.

Valid Usage

  • The srcOffset member of each element of pRegions must be less than the size of srcBuffer
  • The dstOffset member of each element of pRegions must be less than the size of dstBuffer
  • The size member of each element of pRegions must be less than or equal to the size of srcBuffer minus srcOffset
  • The size member of each element of pRegions must be less than or equal to the size of dstBuffer minus dstOffset
  • The union of the source regions, and the union of the destination regions, specified by the elements of pRegions, must not overlap in memory
  • srcBuffer must have been created with BUFFER_USAGE_TRANSFER_SRC_BIT usage flag
  • If srcBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • dstBuffer must have been created with BUFFER_USAGE_TRANSFER_DST_BIT usage flag
  • If dstBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • If commandBuffer is an unprotected command buffer, then srcBuffer must not be a protected buffer
  • If commandBuffer is an unprotected command buffer, then dstBuffer must not be a protected buffer
  • If commandBuffer is a protected command buffer, then dstBuffer must not be an unprotected buffer

Valid Usage (Implicit)

  • srcBuffer must be a valid Buffer handle
  • dstBuffer must be a valid Buffer handle
  • pRegions must be a valid pointer to an array of regionCount valid BufferCopy structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstBuffer, and srcBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

Buffer, BufferCopy, CommandBuffer

cmdCopyImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcImage" ::: Image)

srcImage is the source image.

-> ("srcImageLayout" ::: ImageLayout)

srcImageLayout is the current layout of the source image subresource.

-> ("dstImage" ::: Image)

dstImage is the destination image.

-> ("dstImageLayout" ::: ImageLayout)

dstImageLayout is the current layout of the destination image subresource.

-> ("regions" ::: Vector ImageCopy)

pRegions is a pointer to an array of ImageCopy structures specifying the regions to copy.

-> io () 

vkCmdCopyImage - Copy data between images

Description

Each region in pRegions is copied from the source image to the same region of the destination image. srcImage and dstImage can be the same image or alias the same memory.

The formats of srcImage and dstImage must be compatible. Formats are compatible if they share the same class, as shown in the Compatible Formats table. Depth/stencil formats must match exactly.

If the format of srcImage or dstImage is a multi-planar image format, regions of each plane to be copied must be specified separately using the srcSubresource and dstSubresource members of the ImageCopy structure. In this case, the aspectMask of the srcSubresource or dstSubresource that refers to the multi-planar image must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT. For the purposes of cmdCopyImage, each plane of a multi-planar image is treated as having the format listed in https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#formats-compatible-planes for the plane identified by the aspectMask of the corresponding subresource. This applies both to Format and to coordinates used in the copy, which correspond to texels in the plane rather than how these texels map to coordinates in the image as a whole.

Note

For example, the IMAGE_ASPECT_PLANE_1_BIT plane of a FORMAT_G8_B8R8_2PLANE_420_UNORM image is compatible with an image of format FORMAT_R8G8_UNORM and (less usefully) with the IMAGE_ASPECT_PLANE_0_BIT plane of an image of format FORMAT_G10X6_B10X6_R10X6_3PLANE_420_UNORM_3PACK16, as each texel is 2 bytes in size.

cmdCopyImage allows copying between size-compatible compressed and uncompressed internal formats. Formats are size-compatible if the texel block size of the uncompressed format is equal to the texel block size of the compressed format. Such a copy does not perform on-the-fly compression or decompression. When copying from an uncompressed format to a compressed format, each texel of uncompressed data of the source image is copied as a raw value to the corresponding compressed texel block of the destination image. When copying from a compressed format to an uncompressed format, each compressed texel block of the source image is copied as a raw value to the corresponding texel of uncompressed data in the destination image. Thus, for example, it is legal to copy between a 128-bit uncompressed format and a compressed format which has a 128-bit sized compressed texel block representing 4×4 texels (using 8 bits per texel), or between a 64-bit uncompressed format and a compressed format which has a 64-bit sized compressed texel block representing 4×4 texels (using 4 bits per texel).

When copying between compressed and uncompressed formats the extent members represent the texel dimensions of the source image and not the destination. When copying from a compressed image to an uncompressed image the image texel dimensions written to the uncompressed image will be source extent divided by the compressed texel block dimensions. When copying from an uncompressed image to a compressed image the image texel dimensions written to the compressed image will be the source extent multiplied by the compressed texel block dimensions. In both cases the number of bytes read and the number of bytes written will be identical.

Copying to or from block-compressed images is typically done in multiples of the compressed texel block size. For this reason the extent must be a multiple of the compressed texel block dimension. There is one exception to this rule which is required to handle compressed images created with dimensions that are not a multiple of the compressed texel block dimensions: if the srcImage is compressed, then:

  • If extent.width is not a multiple of the compressed texel block width, then (extent.width + srcOffset.x) must equal the image subresource width.
  • If extent.height is not a multiple of the compressed texel block height, then (extent.height + srcOffset.y) must equal the image subresource height.
  • If extent.depth is not a multiple of the compressed texel block depth, then (extent.depth + srcOffset.z) must equal the image subresource depth.

Similarly, if the dstImage is compressed, then:

  • If extent.width is not a multiple of the compressed texel block width, then (extent.width + dstOffset.x) must equal the image subresource width.
  • If extent.height is not a multiple of the compressed texel block height, then (extent.height + dstOffset.y) must equal the image subresource height.
  • If extent.depth is not a multiple of the compressed texel block depth, then (extent.depth + dstOffset.z) must equal the image subresource depth.

This allows the last compressed texel block of the image in each non-multiple dimension to be included as a source or destination of the copy.

_422” image formats that are not multi-planar are treated as having a 2×1 compressed texel block for the purposes of these rules.

cmdCopyImage can be used to copy image data between multisample images, but both images must have the same number of samples.

Valid Usage

  • The union of all source regions, and the union of all destination regions, specified by the elements of pRegions, must not overlap in memory
  • The format features of srcImage must contain FORMAT_FEATURE_TRANSFER_SRC_BIT
  • srcImage must have been created with IMAGE_USAGE_TRANSFER_SRC_BIT usage flag
  • If srcImage is non-sparse then the image or disjoint plane to be copied must be bound completely and contiguously to a single DeviceMemory object
  • srcImageLayout must specify the layout of the image subresources of srcImage specified in pRegions at the time this command is executed on a Device
  • srcImageLayout must be IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL, IMAGE_LAYOUT_GENERAL, or IMAGE_LAYOUT_SHARED_PRESENT_KHR
  • The format features of dstImage must contain FORMAT_FEATURE_TRANSFER_DST_BIT
  • dstImage must have been created with IMAGE_USAGE_TRANSFER_DST_BIT usage flag
  • If dstImage is non-sparse then the image or disjoint plane that is the destination of the copy must be bound completely and contiguously to a single DeviceMemory object
  • dstImageLayout must specify the layout of the image subresources of dstImage specified in pRegions at the time this command is executed on a Device
  • dstImageLayout must be IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, IMAGE_LAYOUT_GENERAL, or IMAGE_LAYOUT_SHARED_PRESENT_KHR
  • If the Format of each of srcImage and dstImage is not a multi-planar format, the Format of each of srcImage and dstImage must be compatible, as defined above
  • In a copy to or from a plane of a multi-planar image, the Format of the image and plane must be compatible according to the description of compatible planes for the plane being copied
  • The sample count of srcImage and dstImage must match
  • If commandBuffer is an unprotected command buffer, then srcImage must not be a protected image
  • If commandBuffer is an unprotected command buffer, then dstImage must not be a protected image
  • If commandBuffer is a protected command buffer, then dstImage must not be an unprotected image
  • The srcSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when srcImage was created
  • The dstSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when dstImage was created
  • The srcSubresource.baseArrayLayer + srcSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when srcImage was created
  • The dstSubresource.baseArrayLayer + dstSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when dstImage was created
  • The srcOffset and extent members of each element of pRegions must respect the image transfer granularity requirements of commandBuffer’s command pool’s queue family, as described in QueueFamilyProperties
  • The dstOffset and extent members of each element of pRegions must respect the image transfer granularity requirements of commandBuffer’s command pool’s queue family, as described in QueueFamilyProperties
  • dstImage and srcImage must not have been created with flags containing IMAGE_CREATE_SUBSAMPLED_BIT_EXT

Valid Usage (Implicit)

  • srcImage must be a valid Image handle
  • srcImageLayout must be a valid ImageLayout value
  • dstImage must be a valid Image handle
  • dstImageLayout must be a valid ImageLayout value
  • pRegions must be a valid pointer to an array of regionCount valid ImageCopy structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstImage, and srcImage must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

CommandBuffer, Image, ImageCopy, ImageLayout

cmdBlitImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcImage" ::: Image)

srcImage is the source image.

-> ("srcImageLayout" ::: ImageLayout)

srcImageLayout is the layout of the source image subresources for the blit.

-> ("dstImage" ::: Image)

dstImage is the destination image.

-> ("dstImageLayout" ::: ImageLayout)

dstImageLayout is the layout of the destination image subresources for the blit.

-> ("regions" ::: Vector ImageBlit)

pRegions is a pointer to an array of ImageBlit structures specifying the regions to blit.

-> Filter

filter is a Filter specifying the filter to apply if the blits require scaling.

-> io () 

vkCmdBlitImage - Copy regions of an image, potentially performing format conversion,

Description

cmdBlitImage must not be used for multisampled source or destination images. Use cmdResolveImage for this purpose.

As the sizes of the source and destination extents can differ in any dimension, texels in the source extent are scaled and filtered to the destination extent. Scaling occurs via the following operations:

  • For each destination texel, the integer coordinate of that texel is converted to an unnormalized texture coordinate, using the effective inverse of the equations described in unnormalized to integer conversion:

    • ubase = i + ½
    • vbase = j + ½
    • wbase = k + ½
  • These base coordinates are then offset by the first destination offset:

    • uoffset = ubase - xdst0
    • voffset = vbase - ydst0
    • woffset = wbase - zdst0
    • aoffset = a - baseArrayCountdst
  • The scale is determined from the source and destination regions, and applied to the offset coordinates:

    • scale_u = (xsrc1 - xsrc0) / (xdst1 - xdst0)
    • scale_v = (ysrc1 - ysrc0) / (ydst1 - ydst0)
    • scale_w = (zsrc1 - zsrc0) / (zdst1 - zdst0)
    • uscaled = uoffset * scaleu
    • vscaled = voffset * scalev
    • wscaled = woffset * scalew
  • Finally the source offset is added to the scaled coordinates, to determine the final unnormalized coordinates used to sample from srcImage:

    • u = uscaled + xsrc0
    • v = vscaled + ysrc0
    • w = wscaled + zsrc0
    • q = mipLevel
    • a = aoffset + baseArrayCountsrc

These coordinates are used to sample from the source image, as described in Image Operations chapter, with the filter mode equal to that of filter, a mipmap mode of SAMPLER_MIPMAP_MODE_NEAREST and an address mode of SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE. Implementations must clamp at the edge of the source image, and may additionally clamp to the edge of the source region.

Note

Due to allowable rounding errors in the generation of the source texture coordinates, it is not always possible to guarantee exactly which source texels will be sampled for a given blit. As rounding errors are implementation dependent, the exact results of a blitting operation are also implementation dependent.

Blits are done layer by layer starting with the baseArrayLayer member of srcSubresource for the source and dstSubresource for the destination. layerCount layers are blitted to the destination image.

3D textures are blitted slice by slice. Slices in the source region bounded by srcOffsets[0].z and srcOffsets[1].z are copied to slices in the destination region bounded by dstOffsets[0].z and dstOffsets[1].z. For each destination slice, a source z coordinate is linearly interpolated between srcOffsets[0].z and srcOffsets[1].z. If the filter parameter is FILTER_LINEAR then the value sampled from the source image is taken by doing linear filtering using the interpolated z coordinate. If filter parameter is FILTER_NEAREST then the value sampled from the source image is taken from the single nearest slice, with an implementation-dependent arithmetic rounding mode.

The following filtering and conversion rules apply:

  • Integer formats can only be converted to other integer formats with the same signedness.
  • No format conversion is supported between depth/stencil images. The formats must match.
  • Format conversions on unorm, snorm, unscaled and packed float formats of the copied aspect of the image are performed by first converting the pixels to float values.
  • For sRGB source formats, nonlinear RGB values are converted to linear representation prior to filtering.
  • After filtering, the float values are first clamped and then cast to the destination image format. In case of sRGB destination format, linear RGB values are converted to nonlinear representation before writing the pixel to the image.

Signed and unsigned integers are converted by first clamping to the representable range of the destination format, then casting the value.

Valid Usage

  • The source region specified by each element of pRegions must be a region that is contained within srcImage

Valid Usage (Implicit)

  • srcImage must be a valid Image handle
  • srcImageLayout must be a valid ImageLayout value
  • dstImage must be a valid Image handle
  • dstImageLayout must be a valid ImageLayout value
  • pRegions must be a valid pointer to an array of regionCount valid ImageBlit structures
  • filter must be a valid Filter value
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstImage, and srcImage must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Transfer

See Also

CommandBuffer, Filter, Image, ImageBlit, ImageLayout

cmdCopyBufferToImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcBuffer" ::: Buffer)

srcBuffer is the source buffer.

-> ("dstImage" ::: Image)

dstImage is the destination image.

-> ("dstImageLayout" ::: ImageLayout)

dstImageLayout is the layout of the destination image subresources for the copy.

-> ("regions" ::: Vector BufferImageCopy)

pRegions is a pointer to an array of BufferImageCopy structures specifying the regions to copy.

-> io () 

vkCmdCopyBufferToImage - Copy data from a buffer into an image

Description

Each region in pRegions is copied from the specified region of the source buffer to the specified region of the destination image.

If the format of dstImage is a multi-planar image format), regions of each plane to be a target of a copy must be specified separately using the pRegions member of the BufferImageCopy structure. In this case, the aspectMask of imageSubresource must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT. For the purposes of cmdCopyBufferToImage, each plane of a multi-planar image is treated as having the format listed in https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#formats-compatible-planes for the plane identified by the aspectMask of the corresponding subresource. This applies both to Format and to coordinates used in the copy, which correspond to texels in the plane rather than how these texels map to coordinates in the image as a whole.

Valid Usage

  • srcBuffer must be large enough to contain all buffer locations that are accessed according to Buffer and Image Addressing, for each element of pRegions
  • The image region specified by each element of pRegions must be a region that is contained within dstImage if the dstImage’s Format is not a multi-planar format, and must be a region that is contained within the plane being copied to if the dstImage’s Format is a multi-planar format
  • The union of all source regions, and the union of all destination regions, specified by the elements of pRegions, must not overlap in memory
  • srcBuffer must have been created with BUFFER_USAGE_TRANSFER_SRC_BIT usage flag
  • The format features of dstImage must contain FORMAT_FEATURE_TRANSFER_DST_BIT
  • If srcBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • dstImage must have been created with IMAGE_USAGE_TRANSFER_DST_BIT usage flag
  • If dstImage is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • dstImage must have a sample count equal to SAMPLE_COUNT_1_BIT
  • dstImageLayout must specify the layout of the image subresources of dstImage specified in pRegions at the time this command is executed on a Device
  • dstImageLayout must be IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, IMAGE_LAYOUT_GENERAL, or IMAGE_LAYOUT_SHARED_PRESENT_KHR
  • If commandBuffer is an unprotected command buffer, then srcBuffer must not be a protected buffer
  • If commandBuffer is an unprotected command buffer, then dstImage must not be a protected image
  • If commandBuffer is a protected command buffer, then dstImage must not be an unprotected image
  • The imageSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when dstImage was created
  • The imageSubresource.baseArrayLayer + imageSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when dstImage was created
  • The imageOffset and imageExtent members of each element of pRegions must respect the image transfer granularity requirements of commandBuffer’s command pool’s queue family, as described in QueueFamilyProperties
  • dstImage must not have been created with flags containing IMAGE_CREATE_SUBSAMPLED_BIT_EXT
  • If the queue family used to create the CommandPool which commandBuffer was allocated from does not support QUEUE_GRAPHICS_BIT or QUEUE_COMPUTE_BIT, the bufferOffset member of any element of pRegions must be a multiple of 4
  • If dstImage has a depth/stencil format, the bufferOffset member of any element of pRegions must be a multiple of 4

Valid Usage (Implicit)

  • srcBuffer must be a valid Buffer handle
  • dstImage must be a valid Image handle
  • dstImageLayout must be a valid ImageLayout value
  • pRegions must be a valid pointer to an array of regionCount valid BufferImageCopy structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstImage, and srcBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

Buffer, BufferImageCopy, CommandBuffer, Image, ImageLayout

cmdCopyImageToBuffer Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcImage" ::: Image)

srcImage is the source image.

-> ("srcImageLayout" ::: ImageLayout)

srcImageLayout is the layout of the source image subresources for the copy.

-> ("dstBuffer" ::: Buffer)

dstBuffer is the destination buffer.

-> ("regions" ::: Vector BufferImageCopy)

pRegions is a pointer to an array of BufferImageCopy structures specifying the regions to copy.

-> io () 

vkCmdCopyImageToBuffer - Copy image data into a buffer

Description

Each region in pRegions is copied from the specified region of the source image to the specified region of the destination buffer.

If the Format of srcImage is a multi-planar image format, regions of each plane to be a source of a copy must be specified separately using the pRegions member of the BufferImageCopy structure. In this case, the aspectMask of imageSubresource must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT. For the purposes of cmdCopyBufferToImage, each plane of a multi-planar image is treated as having the format listed in https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#formats-compatible-planes for the plane identified by the aspectMask of the corresponding subresource. This applies both to Format and to coordinates used in the copy, which correspond to texels in the plane rather than how these texels map to coordinates in the image as a whole.

Valid Usage

  • The image region specified by each element of pRegions must be a region that is contained within srcImage if the srcImage’s Format is not a multi-planar format, and must be a region that is contained within the plane being copied if the srcImage’s Format is a multi-planar format
  • dstBuffer must be large enough to contain all buffer locations that are accessed according to Buffer and Image Addressing, for each element of pRegions
  • The union of all source regions, and the union of all destination regions, specified by the elements of pRegions, must not overlap in memory
  • The format features of srcImage must contain FORMAT_FEATURE_TRANSFER_SRC_BIT
  • srcImage must have been created with IMAGE_USAGE_TRANSFER_SRC_BIT usage flag
  • If srcImage is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • srcImage must have a sample count equal to SAMPLE_COUNT_1_BIT
  • srcImageLayout must specify the layout of the image subresources of srcImage specified in pRegions at the time this command is executed on a Device
  • srcImageLayout must be IMAGE_LAYOUT_SHARED_PRESENT_KHR, IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL or IMAGE_LAYOUT_GENERAL
  • dstBuffer must have been created with BUFFER_USAGE_TRANSFER_DST_BIT usage flag
  • If dstBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • If commandBuffer is an unprotected command buffer, then srcImage must not be a protected image
  • If commandBuffer is an unprotected command buffer, then dstBuffer must not be a protected buffer
  • If commandBuffer is a protected command buffer, then dstBuffer must not be an unprotected buffer
  • The imageSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when srcImage was created
  • The imageSubresource.baseArrayLayer + imageSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when srcImage was created
  • The imageOffset and imageExtent members of each element of pRegions must respect the image transfer granularity requirements of commandBuffer’s command pool’s queue family, as described in QueueFamilyProperties
  • srcImage must not have been created with flags containing IMAGE_CREATE_SUBSAMPLED_BIT_EXT
  • If the queue family used to create the CommandPool which commandBuffer was allocated from does not support QUEUE_GRAPHICS_BIT or QUEUE_COMPUTE_BIT, the bufferOffset member of any element of pRegions must be a multiple of 4
  • If srcImage has a depth/stencil format, the bufferOffset member of any element of pRegions must be a multiple of 4

Valid Usage (Implicit)

  • srcImage must be a valid Image handle
  • srcImageLayout must be a valid ImageLayout value
  • dstBuffer must be a valid Buffer handle
  • pRegions must be a valid pointer to an array of regionCount valid BufferImageCopy structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstBuffer, and srcImage must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

Buffer, BufferImageCopy, CommandBuffer, Image, ImageLayout

cmdUpdateBuffer Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("dstBuffer" ::: Buffer)

dstBuffer is a handle to the buffer to be updated.

-> ("dstOffset" ::: DeviceSize)

dstOffset is the byte offset into the buffer to start updating, and must be a multiple of 4.

-> ("dataSize" ::: DeviceSize)

dataSize is the number of bytes to update, and must be a multiple of 4.

-> ("data" ::: Ptr ())

pData is a pointer to the source data for the buffer update, and must be at least dataSize bytes in size.

-> io () 

vkCmdUpdateBuffer - Update a buffer’s contents from host memory

Description

dataSize must be less than or equal to 65536 bytes. For larger updates, applications can use buffer to buffer copies.

Note

Buffer updates performed with cmdUpdateBuffer first copy the data into command buffer memory when the command is recorded (which requires additional storage and may incur an additional allocation), and then copy the data from the command buffer into dstBuffer when the command is executed on a device.

The additional cost of this functionality compared to buffer to buffer copies means it is only recommended for very small amounts of data, and is why it is limited to only 65536 bytes.

Applications can work around this by issuing multiple cmdUpdateBuffer commands to different ranges of the same buffer, but it is strongly recommended that they should not.

The source data is copied from the user pointer to the command buffer when the command is called.

cmdUpdateBuffer is only allowed outside of a render pass. This command is treated as “transfer” operation, for the purposes of synchronization barriers. The BUFFER_USAGE_TRANSFER_DST_BIT must be specified in usage of BufferCreateInfo in order for the buffer to be compatible with cmdUpdateBuffer.

Valid Usage

  • dstOffset must be less than the size of dstBuffer
  • dataSize must be less than or equal to the size of dstBuffer minus dstOffset
  • dstBuffer must have been created with BUFFER_USAGE_TRANSFER_DST_BIT usage flag
  • If dstBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • dstOffset must be a multiple of 4
  • dataSize must be less than or equal to 65536
  • dataSize must be a multiple of 4
  • If commandBuffer is an unprotected command buffer, then dstBuffer must not be a protected buffer
  • If commandBuffer is a protected command buffer, then dstBuffer must not be an unprotected buffer

Valid Usage (Implicit)

  • dstBuffer must be a valid Buffer handle
  • pData must be a valid pointer to an array of dataSize bytes
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • dataSize must be greater than 0
  • Both of commandBuffer, and dstBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

Buffer, CommandBuffer, DeviceSize

cmdFillBuffer Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("dstBuffer" ::: Buffer)

dstBuffer is the buffer to be filled.

-> ("dstOffset" ::: DeviceSize)

dstOffset is the byte offset into the buffer at which to start filling, and must be a multiple of 4.

-> DeviceSize

size is the number of bytes to fill, and must be either a multiple of 4, or WHOLE_SIZE to fill the range from offset to the end of the buffer. If WHOLE_SIZE is used and the remaining size of the buffer is not a multiple of 4, then the nearest smaller multiple is used.

-> ("data" ::: Word32)

data is the 4-byte word written repeatedly to the buffer to fill size bytes of data. The data word is written to memory according to the host endianness.

-> io () 

vkCmdFillBuffer - Fill a region of a buffer with a fixed value

Description

cmdFillBuffer is treated as “transfer” operation for the purposes of synchronization barriers. The BUFFER_USAGE_TRANSFER_DST_BIT must be specified in usage of BufferCreateInfo in order for the buffer to be compatible with cmdFillBuffer.

Valid Usage

  • dstOffset must be less than the size of dstBuffer
  • dstOffset must be a multiple of 4
  • If size is not equal to WHOLE_SIZE, size must be greater than 0
  • If size is not equal to WHOLE_SIZE, size must be less than or equal to the size of dstBuffer minus dstOffset
  • If size is not equal to WHOLE_SIZE, size must be a multiple of 4
  • dstBuffer must have been created with BUFFER_USAGE_TRANSFER_DST_BIT usage flag
  • If dstBuffer is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • If commandBuffer is an unprotected command buffer, then dstBuffer must not be a protected buffer
  • If commandBuffer is a protected command buffer, then dstBuffer must not be an unprotected buffer

Valid Usage (Implicit)

  • dstBuffer must be a valid Buffer handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics or compute operations
  • This command must only be called outside of a render pass instance
  • Both of commandBuffer, and dstBuffer must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Transfer Graphics Compute Transfer

See Also

Buffer, CommandBuffer, DeviceSize

cmdClearColorImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> Image

image is the image to be cleared.

-> ImageLayout

imageLayout specifies the current layout of the image subresource ranges to be cleared, and must be IMAGE_LAYOUT_SHARED_PRESENT_KHR, IMAGE_LAYOUT_GENERAL or IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL.

-> ClearColorValue

pColor is a pointer to a ClearColorValue structure containing the values that the image subresource ranges will be cleared to (see https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#clears-values below).

-> ("ranges" ::: Vector ImageSubresourceRange)

pRanges is a pointer to an array of ImageSubresourceRange structures describing a range of mipmap levels, array layers, and aspects to be cleared, as described in Image Views.

-> io () 

vkCmdClearColorImage - Clear regions of a color image

Description

Each specified range in pRanges is cleared to the value specified by pColor.

Valid Usage

Valid Usage (Implicit)

  • image must be a valid Image handle
  • imageLayout must be a valid ImageLayout value
  • pColor must be a valid pointer to a valid ClearColorValue union
  • pRanges must be a valid pointer to an array of rangeCount valid ImageSubresourceRange structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • rangeCount must be greater than 0
  • Both of commandBuffer, and image must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Compute Transfer

See Also

ClearColorValue, CommandBuffer, Image, ImageLayout, ImageSubresourceRange

cmdClearDepthStencilImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> Image

image is the image to be cleared.

-> ImageLayout

imageLayout specifies the current layout of the image subresource ranges to be cleared, and must be IMAGE_LAYOUT_GENERAL or IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL.

-> ClearDepthStencilValue

pDepthStencil is a pointer to a ClearDepthStencilValue structure containing the values that the depth and stencil image subresource ranges will be cleared to (see https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#clears-values below).

-> ("ranges" ::: Vector ImageSubresourceRange)

pRanges is a pointer to an array of ImageSubresourceRange structures describing a range of mipmap levels, array layers, and aspects to be cleared, as described in Image Views.

-> io () 

vkCmdClearDepthStencilImage - Fill regions of a combined depth/stencil image

Valid Usage

Valid Usage (Implicit)

  • image must be a valid Image handle
  • imageLayout must be a valid ImageLayout value
  • pDepthStencil must be a valid pointer to a valid ClearDepthStencilValue structure
  • pRanges must be a valid pointer to an array of rangeCount valid ImageSubresourceRange structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called outside of a render pass instance
  • rangeCount must be greater than 0
  • Both of commandBuffer, and image must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Transfer

See Also

ClearDepthStencilValue, CommandBuffer, Image, ImageLayout, ImageSubresourceRange

cmdClearAttachments Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("attachments" ::: Vector ClearAttachment)

pAttachments is a pointer to an array of ClearAttachment structures defining the attachments to clear and the clear values to use. If any attachment to be cleared in the current subpass is ATTACHMENT_UNUSED, then the clear has no effect on that attachment.

-> ("rects" ::: Vector ClearRect)

pRects is a pointer to an array of ClearRect structures defining regions within each selected attachment to clear.

-> io () 

vkCmdClearAttachments - Clear regions within bound framebuffer attachments

Description

cmdClearAttachments can clear multiple regions of each attachment used in the current subpass of a render pass instance. This command must be called only inside a render pass instance, and implicitly selects the images to clear based on the current framebuffer attachments and the command parameters.

If the render pass has a fragment density map attachment, clears follow the operations of fragment density maps as if each clear region was a primitive which generates fragments. The clear color is applied to all pixels inside each fragment’s area regardless if the pixels lie outside of the clear region. Clears may have a different set of supported fragment areas than draws.

Unlike other clear commands, cmdClearAttachments executes as a drawing command, rather than a transfer command, with writes performed by it executing in rasterization order. Clears to color attachments are executed as color attachment writes, by the PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT stage. Clears to depth/stencil attachments are executed as depth writes and writes by the PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT and PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT stages.

Valid Usage

  • If the aspectMask member of any element of pAttachments contains IMAGE_ASPECT_COLOR_BIT, then the colorAttachment member of that element must either refer to a color attachment which is ATTACHMENT_UNUSED, or must be a valid color attachment
  • If the aspectMask member of any element of pAttachments contains IMAGE_ASPECT_DEPTH_BIT, then the current subpass' depth/stencil attachment must either be ATTACHMENT_UNUSED, or must have a depth component
  • If the aspectMask member of any element of pAttachments contains IMAGE_ASPECT_STENCIL_BIT, then the current subpass' depth/stencil attachment must either be ATTACHMENT_UNUSED, or must have a stencil component
  • The rect member of each element of pRects must have an extent.width greater than 0
  • The rect member of each element of pRects must have an extent.height greater than 0
  • The rectangular region specified by each element of pRects must be contained within the render area of the current render pass instance
  • The layers specified by each element of pRects must be contained within every attachment that pAttachments refers to
  • The layerCount member of each element of pRects must not be 0
  • If commandBuffer is an unprotected command buffer, then each attachment to be cleared must not be a protected image
  • If commandBuffer is a protected command buffer, then each attachment to be cleared must not be an unprotected image
  • If the render pass instance this is recorded in uses multiview, then baseArrayLayer must be zero and layerCount must be one

Valid Usage (Implicit)

  • pAttachments must be a valid pointer to an array of attachmentCount valid ClearAttachment structures
  • pRects must be a valid pointer to an array of rectCount ClearRect structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance
  • attachmentCount must be greater than 0
  • rectCount must be greater than 0

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Inside Graphics Graphics

See Also

ClearAttachment, ClearRect, CommandBuffer

cmdResolveImage Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> ("srcImage" ::: Image)

srcImage is the source image.

-> ("srcImageLayout" ::: ImageLayout)

srcImageLayout is the layout of the source image subresources for the resolve.

-> ("dstImage" ::: Image)

dstImage is the destination image.

-> ("dstImageLayout" ::: ImageLayout)

dstImageLayout is the layout of the destination image subresources for the resolve.

-> ("regions" ::: Vector ImageResolve)

pRegions is a pointer to an array of ImageResolve structures specifying the regions to resolve.

-> io () 

vkCmdResolveImage - Resolve regions of an image

Description

During the resolve the samples corresponding to each pixel location in the source are converted to a single sample before being written to the destination. If the source formats are floating-point or normalized types, the sample values for each pixel are resolved in an implementation-dependent manner. If the source formats are integer types, a single sample’s value is selected for each pixel.

srcOffset and dstOffset select the initial x, y, and z offsets in texels of the sub-regions of the source and destination image data. extent is the size in texels of the source image to resolve in width, height and depth.

Resolves are done layer by layer starting with baseArrayLayer member of srcSubresource for the source and dstSubresource for the destination. layerCount layers are resolved to the destination image.

Valid Usage

  • The source region specified by each element of pRegions must be a region that is contained within srcImage
  • The destination region specified by each element of pRegions must be a region that is contained within dstImage
  • The union of all source regions, and the union of all destination regions, specified by the elements of pRegions, must not overlap in memory
  • If srcImage is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • srcImage must have a sample count equal to any valid sample count value other than SAMPLE_COUNT_1_BIT
  • If dstImage is non-sparse then it must be bound completely and contiguously to a single DeviceMemory object
  • dstImage must have a sample count equal to SAMPLE_COUNT_1_BIT
  • srcImageLayout must specify the layout of the image subresources of srcImage specified in pRegions at the time this command is executed on a Device
  • srcImageLayout must be IMAGE_LAYOUT_SHARED_PRESENT_KHR, IMAGE_LAYOUT_TRANSFER_SRC_OPTIMAL or IMAGE_LAYOUT_GENERAL
  • dstImageLayout must specify the layout of the image subresources of dstImage specified in pRegions at the time this command is executed on a Device
  • dstImageLayout must be IMAGE_LAYOUT_SHARED_PRESENT_KHR, IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL or IMAGE_LAYOUT_GENERAL
  • The format features of dstImage must contain FORMAT_FEATURE_COLOR_ATTACHMENT_BIT
  • srcImage and dstImage must have been created with the same image format
  • If commandBuffer is an unprotected command buffer, then srcImage must not be a protected image
  • If commandBuffer is an unprotected command buffer, then dstImage must not be a protected image
  • If commandBuffer is a protected command buffer, then dstImage must not be an unprotected image
  • The srcSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when srcImage was created
  • The dstSubresource.mipLevel member of each element of pRegions must be less than the mipLevels specified in ImageCreateInfo when dstImage was created
  • The srcSubresource.baseArrayLayer + srcSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when srcImage was created
  • The dstSubresource.baseArrayLayer + dstSubresource.layerCount of each element of pRegions must be less than or equal to the arrayLayers specified in ImageCreateInfo when dstImage was created
  • dstImage and srcImage must not have been created with flags containing IMAGE_CREATE_SUBSAMPLED_BIT_EXT

Valid Usage (Implicit)

  • srcImage must be a valid Image handle
  • srcImageLayout must be a valid ImageLayout value
  • dstImage must be a valid Image handle
  • dstImageLayout must be a valid ImageLayout value
  • pRegions must be a valid pointer to an array of regionCount valid ImageResolve structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called outside of a render pass instance
  • regionCount must be greater than 0
  • Each of commandBuffer, dstImage, and srcImage must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Transfer

See Also

CommandBuffer, Image, ImageLayout, ImageResolve

cmdSetEvent Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> Event

event is the event that will be signaled.

-> ("stageMask" ::: PipelineStageFlags)

stageMask specifies the source stage mask used to determine the first synchronization scope.

-> io () 

vkCmdSetEvent - Set an event object to signaled state

Description

When cmdSetEvent is submitted to a queue, it defines an execution dependency on commands that were submitted before it, and defines an event signal operation which sets the event to the signaled state.

The first synchronization scope includes all commands that occur earlier in submission order. The synchronization scope is limited to operations on the pipeline stages determined by the source stage mask specified by stageMask.

The second synchronization scope includes only the event signal operation.

If event is already in the signaled state when cmdSetEvent is executed on the device, then cmdSetEvent has no effect, no event signal operation occurs, and no execution dependency is generated.

Valid Usage

Valid Usage (Implicit)

  • event must be a valid Event handle
  • stageMask must be a valid combination of PipelineStageFlagBits values
  • stageMask must not be 0
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • Both of commandBuffer, and event must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Compute

See Also

CommandBuffer, Event, PipelineStageFlags

cmdResetEvent Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> Event

event is the event that will be unsignaled.

-> ("stageMask" ::: PipelineStageFlags)

stageMask is a bitmask of PipelineStageFlagBits specifying the source stage mask used to determine when the event is unsignaled.

-> io () 

vkCmdResetEvent - Reset an event object to non-signaled state

Description

When cmdResetEvent is submitted to a queue, it defines an execution dependency on commands that were submitted before it, and defines an event unsignal operation which resets the event to the unsignaled state.

The first synchronization scope includes all commands that occur earlier in submission order. The synchronization scope is limited to operations on the pipeline stages determined by the source stage mask specified by stageMask.

The second synchronization scope includes only the event unsignal operation.

If event is already in the unsignaled state when cmdResetEvent is executed on the device, then cmdResetEvent has no effect, no event unsignal operation occurs, and no execution dependency is generated.

Valid Usage

Valid Usage (Implicit)

  • event must be a valid Event handle
  • stageMask must be a valid combination of PipelineStageFlagBits values
  • stageMask must not be 0
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • Both of commandBuffer, and event must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Compute

See Also

CommandBuffer, Event, PipelineStageFlags

cmdWaitEvents Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("events" ::: Vector Event)

pEvents is a pointer to an array of event object handles to wait on.

-> ("srcStageMask" ::: PipelineStageFlags)

srcStageMask is a bitmask of PipelineStageFlagBits specifying the source stage mask.

-> ("dstStageMask" ::: PipelineStageFlags)

dstStageMask is a bitmask of PipelineStageFlagBits specifying the destination stage mask.

-> ("memoryBarriers" ::: Vector MemoryBarrier)

pMemoryBarriers is a pointer to an array of MemoryBarrier structures.

-> ("bufferMemoryBarriers" ::: Vector BufferMemoryBarrier)

pBufferMemoryBarriers is a pointer to an array of BufferMemoryBarrier structures.

-> ("imageMemoryBarriers" ::: Vector (SomeStruct ImageMemoryBarrier))

pImageMemoryBarriers is a pointer to an array of ImageMemoryBarrier structures.

-> io () 

vkCmdWaitEvents - Wait for one or more events and insert a set of memory

Description

When cmdWaitEvents is submitted to a queue, it defines a memory dependency between prior event signal operations on the same queue or the host, and subsequent commands. cmdWaitEvents must not be used to wait on event signal operations occurring on other queues.

The first synchronization scope only includes event signal operations that operate on members of pEvents, and the operations that happened-before the event signal operations. Event signal operations performed by cmdSetEvent that occur earlier in submission order are included in the first synchronization scope, if the logically latest pipeline stage in their stageMask parameter is logically earlier than or equal to the logically latest pipeline stage in srcStageMask. Event signal operations performed by setEvent are only included in the first synchronization scope if PIPELINE_STAGE_HOST_BIT is included in srcStageMask.

The second synchronization scope includes all commands that occur later in submission order. The second synchronization scope is limited to operations on the pipeline stages determined by the destination stage mask specified by dstStageMask.

The first access scope is limited to access in the pipeline stages determined by the source stage mask specified by srcStageMask. Within that, the first access scope only includes the first access scopes defined by elements of the pMemoryBarriers, pBufferMemoryBarriers and pImageMemoryBarriers arrays, which each define a set of memory barriers. If no memory barriers are specified, then the first access scope includes no accesses.

The second access scope is limited to access in the pipeline stages determined by the destination stage mask specified by dstStageMask. Within that, the second access scope only includes the second access scopes defined by elements of the pMemoryBarriers, pBufferMemoryBarriers and pImageMemoryBarriers arrays, which each define a set of memory barriers. If no memory barriers are specified, then the second access scope includes no accesses.

Note

cmdWaitEvents is used with cmdSetEvent to define a memory dependency between two sets of action commands, roughly in the same way as pipeline barriers, but split into two commands such that work between the two may execute unhindered.

Unlike cmdPipelineBarrier, a queue family ownership transfer cannot be performed using cmdWaitEvents.

Note

Applications should be careful to avoid race conditions when using events. There is no direct ordering guarantee between a cmdResetEvent command and a cmdWaitEvents command submitted after it, so some other execution dependency must be included between these commands (e.g. a semaphore).

Valid Usage

  • The srcAccessMask member of each element of pMemoryBarriers must only include access flags that are supported by one or more of the pipeline stages in srcStageMask, as specified in the table of supported access types

Valid Usage (Implicit)

  • pEvents must be a valid pointer to an array of eventCount valid Event handles
  • srcStageMask must be a valid combination of PipelineStageFlagBits values
  • srcStageMask must not be 0
  • dstStageMask must be a valid combination of PipelineStageFlagBits values
  • dstStageMask must not be 0
  • If memoryBarrierCount is not 0, pMemoryBarriers must be a valid pointer to an array of memoryBarrierCount valid MemoryBarrier structures
  • If bufferMemoryBarrierCount is not 0, pBufferMemoryBarriers must be a valid pointer to an array of bufferMemoryBarrierCount valid BufferMemoryBarrier structures
  • If imageMemoryBarrierCount is not 0, pImageMemoryBarriers must be a valid pointer to an array of imageMemoryBarrierCount valid ImageMemoryBarrier structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • eventCount must be greater than 0
  • Both of commandBuffer, and the elements of pEvents must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

BufferMemoryBarrier, CommandBuffer, Event, ImageMemoryBarrier, MemoryBarrier, PipelineStageFlags

cmdWaitEventsSafe Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("events" ::: Vector Event)

pEvents is a pointer to an array of event object handles to wait on.

-> ("srcStageMask" ::: PipelineStageFlags)

srcStageMask is a bitmask of PipelineStageFlagBits specifying the source stage mask.

-> ("dstStageMask" ::: PipelineStageFlags)

dstStageMask is a bitmask of PipelineStageFlagBits specifying the destination stage mask.

-> ("memoryBarriers" ::: Vector MemoryBarrier)

pMemoryBarriers is a pointer to an array of MemoryBarrier structures.

-> ("bufferMemoryBarriers" ::: Vector BufferMemoryBarrier)

pBufferMemoryBarriers is a pointer to an array of BufferMemoryBarrier structures.

-> ("imageMemoryBarriers" ::: Vector (SomeStruct ImageMemoryBarrier))

pImageMemoryBarriers is a pointer to an array of ImageMemoryBarrier structures.

-> io () 

A variant of cmdWaitEvents which makes a *safe* FFI call

cmdPipelineBarrier Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command is recorded.

-> ("srcStageMask" ::: PipelineStageFlags)

srcStageMask is a bitmask of PipelineStageFlagBits specifying the source stage mask.

-> ("dstStageMask" ::: PipelineStageFlags)

dstStageMask is a bitmask of PipelineStageFlagBits specifying the destination stage mask.

-> DependencyFlags

dependencyFlags is a bitmask of DependencyFlagBits specifying how execution and memory dependencies are formed.

-> ("memoryBarriers" ::: Vector MemoryBarrier)

pMemoryBarriers is a pointer to an array of MemoryBarrier structures.

-> ("bufferMemoryBarriers" ::: Vector BufferMemoryBarrier)

pBufferMemoryBarriers is a pointer to an array of BufferMemoryBarrier structures.

-> ("imageMemoryBarriers" ::: Vector (SomeStruct ImageMemoryBarrier))

pImageMemoryBarriers is a pointer to an array of ImageMemoryBarrier structures.

-> io () 

vkCmdPipelineBarrier - Insert a memory dependency

Description

When cmdPipelineBarrier is submitted to a queue, it defines a memory dependency between commands that were submitted before it, and those submitted after it.

If cmdPipelineBarrier was recorded outside a render pass instance, the first synchronization scope includes all commands that occur earlier in submission order. If cmdPipelineBarrier was recorded inside a render pass instance, the first synchronization scope includes only commands that occur earlier in submission order within the same subpass. In either case, the first synchronization scope is limited to operations on the pipeline stages determined by the source stage mask specified by srcStageMask.

If cmdPipelineBarrier was recorded outside a render pass instance, the second synchronization scope includes all commands that occur later in submission order. If cmdPipelineBarrier was recorded inside a render pass instance, the second synchronization scope includes only commands that occur later in submission order within the same subpass. In either case, the second synchronization scope is limited to operations on the pipeline stages determined by the destination stage mask specified by dstStageMask.

The first access scope is limited to access in the pipeline stages determined by the source stage mask specified by srcStageMask. Within that, the first access scope only includes the first access scopes defined by elements of the pMemoryBarriers, pBufferMemoryBarriers and pImageMemoryBarriers arrays, which each define a set of memory barriers. If no memory barriers are specified, then the first access scope includes no accesses.

The second access scope is limited to access in the pipeline stages determined by the destination stage mask specified by dstStageMask. Within that, the second access scope only includes the second access scopes defined by elements of the pMemoryBarriers, pBufferMemoryBarriers and pImageMemoryBarriers arrays, which each define a set of memory barriers. If no memory barriers are specified, then the second access scope includes no accesses.

If dependencyFlags includes DEPENDENCY_BY_REGION_BIT, then any dependency between framebuffer-space pipeline stages is framebuffer-local - otherwise it is framebuffer-global.

Valid Usage

Valid Usage (Implicit)

  • srcStageMask must be a valid combination of PipelineStageFlagBits values
  • srcStageMask must not be 0
  • dstStageMask must be a valid combination of PipelineStageFlagBits values
  • dstStageMask must not be 0
  • dependencyFlags must be a valid combination of DependencyFlagBits values
  • If memoryBarrierCount is not 0, pMemoryBarriers must be a valid pointer to an array of memoryBarrierCount valid MemoryBarrier structures
  • If bufferMemoryBarrierCount is not 0, pBufferMemoryBarriers must be a valid pointer to an array of bufferMemoryBarrierCount valid BufferMemoryBarrier structures
  • If imageMemoryBarrierCount is not 0, pImageMemoryBarriers must be a valid pointer to an array of imageMemoryBarrierCount valid ImageMemoryBarrier structures
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Transfer Graphics Compute

See Also

BufferMemoryBarrier, CommandBuffer, DependencyFlags, ImageMemoryBarrier, MemoryBarrier, PipelineStageFlags

cmdBeginQuery Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which this command will be recorded.

-> QueryPool

queryPool is the query pool that will manage the results of the query.

-> ("query" ::: Word32)

query is the query index within the query pool that will contain the results.

-> QueryControlFlags

flags is a bitmask of QueryControlFlagBits specifying constraints on the types of queries that can be performed.

-> io () 

vkCmdBeginQuery - Begin a query

Description

If the queryType of the pool is QUERY_TYPE_OCCLUSION and flags contains QUERY_CONTROL_PRECISE_BIT, an implementation must return a result that matches the actual number of samples passed. This is described in more detail in Occlusion Queries.

Calling cmdBeginQuery is equivalent to calling cmdBeginQueryIndexedEXT with the index parameter set to zero.

After beginning a query, that query is considered active within the command buffer it was called in until that same query is ended. Queries active in a primary command buffer when secondary command buffers are executed are considered active for those secondary command buffers.

Valid Usage

  • queryPool must have been created with a queryType that differs from that of any queries that are active within commandBuffer

Valid Usage (Implicit)

  • queryPool must be a valid QueryPool handle
  • flags must be a valid combination of QueryControlFlagBits values
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

CommandBuffer, QueryControlFlags, QueryPool

cmdUseQuery :: forall io r. MonadIO io => CommandBuffer -> QueryPool -> Word32 -> QueryControlFlags -> io r -> io r Source #

This function will call the supplied action between calls to cmdBeginQuery and cmdEndQuery

Note that cmdEndQuery is *not* called if an exception is thrown by the inner action.

cmdEndQuery Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which this command will be recorded.

-> QueryPool

queryPool is the query pool that is managing the results of the query.

-> ("query" ::: Word32)

query is the query index within the query pool where the result is stored.

-> io () 

vkCmdEndQuery - Ends a query

Description

Calling cmdEndQuery is equivalent to calling cmdEndQueryIndexedEXT with the index parameter set to zero.

As queries operate asynchronously, ending a query does not immediately set the query’s status to available. A query is considered finished when the final results of the query are ready to be retrieved by getQueryPoolResults and cmdCopyQueryPoolResults, and this is when the query’s status is set to available.

Once a query is ended the query must finish in finite time, unless the state of the query is changed using other commands, e.g. by issuing a reset of the query.

Valid Usage

  • All queries used by the command must be active

Valid Usage (Implicit)

  • queryPool must be a valid QueryPool handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

CommandBuffer, QueryPool

cmdResetQueryPool Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which this command will be recorded.

-> QueryPool

queryPool is the handle of the query pool managing the queries being reset.

-> ("firstQuery" ::: Word32)

firstQuery is the initial query index to reset.

-> ("queryCount" ::: Word32)

queryCount is the number of queries to reset.

-> io () 

vkCmdResetQueryPool - Reset queries in a query pool

Description

When executed on a queue, this command sets the status of query indices [firstQuery, firstQuery + queryCount - 1] to unavailable.

If the queryType used to create queryPool was QUERY_TYPE_PERFORMANCE_QUERY_KHR, this command sets the status of query indices [firstQuery, firstQuery + queryCount - 1] to unavailable for each pass of queryPool, as indicated by a call to getPhysicalDeviceQueueFamilyPerformanceQueryPassesKHR.

Note

Because cmdResetQueryPool resets all the passes of the indicated queries, applications must not record a cmdResetQueryPool command for a queryPool created with QUERY_TYPE_PERFORMANCE_QUERY_KHR in a command buffer that needs to be submitted multiple times as indicated by a call to getPhysicalDeviceQueueFamilyPerformanceQueryPassesKHR. Otherwise applications will never be able to complete the recorded queries.

Valid Usage

  • firstQuery must be less than the number of queries in queryPool
  • The sum of firstQuery and queryCount must be less than or equal to the number of queries in queryPool
  • All queries used by the command must not be active
  • If queryPool was created with QUERY_TYPE_PERFORMANCE_QUERY_KHR, this command must not be recorded in a command buffer that, either directly or through secondary command buffers, also contains begin commands for a query from the set of queries [firstQuery, firstQuery + queryCount - 1]

Valid Usage (Implicit)

  • queryPool must be a valid QueryPool handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Compute

See Also

CommandBuffer, QueryPool

cmdWriteTimestamp Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which the command will be recorded.

-> PipelineStageFlagBits

pipelineStage is one of the PipelineStageFlagBits, specifying a stage of the pipeline.

-> QueryPool

queryPool is the query pool that will manage the timestamp.

-> ("query" ::: Word32)

query is the query within the query pool that will contain the timestamp.

-> io () 

vkCmdWriteTimestamp - Write a device timestamp into a query object

Description

cmdWriteTimestamp latches the value of the timer when all previous commands have completed executing as far as the specified pipeline stage, and writes the timestamp value to memory. When the timestamp value is written, the availability status of the query is set to available.

Note

If an implementation is unable to detect completion and latch the timer at any specific stage of the pipeline, it may instead do so at any logically later stage.

Timestamps may only be meaningfully compared if they are written by commands submitted to the same queue.

Note

An example of such a comparison is determining the execution time of a sequence of commands.

If cmdWriteTimestamp is called while executing a render pass instance that has multiview enabled, the timestamp uses N consecutive query indices in the query pool (starting at query) where N is the number of bits set in the view mask of the subpass the command is executed in. The resulting query values are determined by an implementation-dependent choice of one of the following behaviors:

  • The first query is a timestamp value and (if more than one bit is set in the view mask) zero is written to the remaining queries. If two timestamps are written in the same subpass, the sum of the execution time of all views between those commands is the difference between the first query written by each command.
  • All N queries are timestamp values. If two timestamps are written in the same subpass, the sum of the execution time of all views between those commands is the sum of the difference between corresponding queries written by each command. The difference between corresponding queries may be the execution time of a single view.

In either case, the application can sum the differences between all N queries to determine the total execution time.

Valid Usage

  • pipelineStage must be a valid stage for the queue family that was used to create the command pool that commandBuffer was allocated from

Valid Usage (Implicit)

  • pipelineStage must be a valid PipelineStageFlagBits value
  • queryPool must be a valid QueryPool handle
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • Both of commandBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Transfer Graphics Compute Transfer

See Also

CommandBuffer, PipelineStageFlagBits, QueryPool

cmdCopyQueryPoolResults Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer into which this command will be recorded.

-> QueryPool

queryPool is the query pool managing the queries containing the desired results.

-> ("firstQuery" ::: Word32)

firstQuery is the initial query index.

-> ("queryCount" ::: Word32)

queryCount is the number of queries. firstQuery and queryCount together define a range of queries.

-> ("dstBuffer" ::: Buffer)

dstBuffer is a Buffer object that will receive the results of the copy command.

-> ("dstOffset" ::: DeviceSize)

dstOffset is an offset into dstBuffer.

-> ("stride" ::: DeviceSize)

stride is the stride in bytes between results for individual queries within dstBuffer. The required size of the backing memory for dstBuffer is determined as described above for getQueryPoolResults.

-> QueryResultFlags

flags is a bitmask of QueryResultFlagBits specifying how and when results are returned.

-> io () 

vkCmdCopyQueryPoolResults - Copy the results of queries in a query pool to a buffer object

Description

cmdCopyQueryPoolResults is guaranteed to see the effect of previous uses of cmdResetQueryPool in the same queue, without any additional synchronization. Thus, the results will always reflect the most recent use of the query.

flags has the same possible values described above for the flags parameter of getQueryPoolResults, but the different style of execution causes some subtle behavioral differences. Because cmdCopyQueryPoolResults executes in order with respect to other query commands, there is less ambiguity about which use of a query is being requested.

Results for all requested occlusion queries, pipeline statistics queries, transform feedback queries, and timestamp queries are written as 64-bit unsigned integer values if QUERY_RESULT_64_BIT is set or 32-bit unsigned integer values otherwise. Performance queries store results in a tightly packed array whose type is determined by the unit member of the corresponding PerformanceCounterKHR.

If neither of QUERY_RESULT_WAIT_BIT and QUERY_RESULT_WITH_AVAILABILITY_BIT are set, results are only written out for queries in the available state.

If QUERY_RESULT_WAIT_BIT is set, the implementation will wait for each query’s status to be in the available state before retrieving the numerical results for that query. This is guaranteed to reflect the most recent use of the query on the same queue, assuming that the query is not being simultaneously used by other queues. If the query does not become available in a finite amount of time (e.g. due to not issuing a query since the last reset), a ERROR_DEVICE_LOST error may occur.

Similarly, if QUERY_RESULT_WITH_AVAILABILITY_BIT is set and QUERY_RESULT_WAIT_BIT is not set, the availability is guaranteed to reflect the most recent use of the query on the same queue, assuming that the query is not being simultaneously used by other queues. As with getQueryPoolResults, implementations must guarantee that if they return a non-zero availability value, then the numerical results are valid.

If QUERY_RESULT_PARTIAL_BIT is set, QUERY_RESULT_WAIT_BIT is not set, and the query’s status is unavailable, an intermediate result value between zero and the final result value is written for that query.

QUERY_RESULT_PARTIAL_BIT must not be used if the pool’s queryType is QUERY_TYPE_TIMESTAMP.

cmdCopyQueryPoolResults is considered to be a transfer operation, and its writes to buffer memory must be synchronized using PIPELINE_STAGE_TRANSFER_BIT and ACCESS_TRANSFER_WRITE_BIT before using the results.

Valid Usage

  • dstOffset must be less than the size of dstBuffer

Valid Usage (Implicit)

  • queryPool must be a valid QueryPool handle
  • dstBuffer must be a valid Buffer handle
  • flags must be a valid combination of QueryResultFlagBits values
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • This command must only be called outside of a render pass instance
  • Each of commandBuffer, dstBuffer, and queryPool must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Outside Graphics Compute Transfer

See Also

Buffer, CommandBuffer, DeviceSize, QueryPool, QueryResultFlags

cmdPushConstants Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer in which the push constant update will be recorded.

-> PipelineLayout

layout is the pipeline layout used to program the push constant updates.

-> ShaderStageFlags

stageFlags is a bitmask of ShaderStageFlagBits specifying the shader stages that will use the push constants in the updated range.

-> ("offset" ::: Word32)

offset is the start offset of the push constant range to update, in units of bytes.

-> ("size" ::: Word32)

size is the size of the push constant range to update, in units of bytes.

-> ("values" ::: Ptr ())

pValues is a pointer to an array of size bytes containing the new push constant values.

-> io () 

vkCmdPushConstants - Update the values of push constants

Description

Note

As stageFlags needs to include all flags the relevant push constant ranges were created with, any flags that are not supported by the queue family that the CommandPool used to allocate commandBuffer was created on are ignored.

Valid Usage

  • For each byte in the range specified by offset and size and for each shader stage in stageFlags, there must be a push constant range in layout that includes that byte and that stage
  • For each byte in the range specified by offset and size and for each push constant range that overlaps that byte, stageFlags must include all stages in that push constant range’s PushConstantRange::stageFlags
  • offset must be a multiple of 4
  • size must be a multiple of 4
  • offset must be less than PhysicalDeviceLimits::maxPushConstantsSize
  • size must be less than or equal to PhysicalDeviceLimits::maxPushConstantsSize minus offset

Valid Usage (Implicit)

  • layout must be a valid PipelineLayout handle
  • stageFlags must be a valid combination of ShaderStageFlagBits values
  • stageFlags must not be 0
  • pValues must be a valid pointer to an array of size bytes
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics, or compute operations
  • size must be greater than 0
  • Both of commandBuffer, and layout must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Secondary Both Graphics Compute

See Also

CommandBuffer, PipelineLayout, ShaderStageFlags

cmdBeginRenderPass Source #

Arguments

:: forall a io. (Extendss RenderPassBeginInfo a, PokeChain a, MonadIO io) 
=> CommandBuffer

commandBuffer is the command buffer in which to record the command.

-> RenderPassBeginInfo a

pRenderPassBegin is a pointer to a RenderPassBeginInfo structure specifying the render pass to begin an instance of, and the framebuffer the instance uses.

-> SubpassContents

contents is a SubpassContents value specifying how the commands in the first subpass will be provided.

-> io () 

vkCmdBeginRenderPass - Begin a new render pass

Description

After beginning a render pass instance, the command buffer is ready to record the commands for the first subpass of that render pass.

Valid Usage

Valid Usage (Implicit)

  • pRenderPassBegin must be a valid pointer to a valid RenderPassBeginInfo structure
  • contents must be a valid SubpassContents value
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called outside of a render pass instance
  • commandBuffer must be a primary CommandBuffer

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Outside Graphics Graphics

See Also

CommandBuffer, RenderPassBeginInfo, SubpassContents

cmdUseRenderPass :: forall a io r. (Extendss RenderPassBeginInfo a, PokeChain a, MonadIO io) => CommandBuffer -> RenderPassBeginInfo a -> SubpassContents -> io r -> io r Source #

This function will call the supplied action between calls to cmdBeginRenderPass and cmdEndRenderPass

Note that cmdEndRenderPass is *not* called if an exception is thrown by the inner action.

cmdNextSubpass Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer in which to record the command.

-> SubpassContents

contents specifies how the commands in the next subpass will be provided, in the same fashion as the corresponding parameter of cmdBeginRenderPass.

-> io () 

vkCmdNextSubpass - Transition to the next subpass of a render pass

Description

The subpass index for a render pass begins at zero when cmdBeginRenderPass is recorded, and increments each time cmdNextSubpass is recorded.

Moving to the next subpass automatically performs any multisample resolve operations in the subpass being ended. End-of-subpass multisample resolves are treated as color attachment writes for the purposes of synchronization. This applies to resolve operations for both color and depth/stencil attachments. That is, they are considered to execute in the PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT pipeline stage and their writes are synchronized with ACCESS_COLOR_ATTACHMENT_WRITE_BIT. Synchronization between rendering within a subpass and any resolve operations at the end of the subpass occurs automatically, without need for explicit dependencies or pipeline barriers. However, if the resolve attachment is also used in a different subpass, an explicit dependency is needed.

After transitioning to the next subpass, the application can record the commands for that subpass.

Valid Usage

  • The current subpass index must be less than the number of subpasses in the render pass minus one
  • This command must not be recorded when transform feedback is active

Valid Usage (Implicit)

  • contents must be a valid SubpassContents value
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance
  • commandBuffer must be a primary CommandBuffer

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Inside Graphics Graphics

See Also

CommandBuffer, SubpassContents

cmdEndRenderPass Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is the command buffer in which to end the current render pass instance.

-> io () 

vkCmdEndRenderPass - End the current render pass

Description

Ending a render pass instance performs any multisample resolve operations on the final subpass.

Valid Usage

  • The current subpass index must be equal to the number of subpasses in the render pass minus one
  • This command must not be recorded when transform feedback is active

Valid Usage (Implicit)

  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support graphics operations
  • This command must only be called inside of a render pass instance
  • commandBuffer must be a primary CommandBuffer

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Inside Graphics Graphics

See Also

CommandBuffer

cmdExecuteCommands Source #

Arguments

:: forall io. MonadIO io 
=> CommandBuffer

commandBuffer is a handle to a primary command buffer that the secondary command buffers are executed in.

-> ("commandBuffers" ::: Vector CommandBuffer)

pCommandBuffers is a pointer to an array of commandBufferCount secondary command buffer handles, which are recorded to execute in the primary command buffer in the order they are listed in the array.

-> io () 

vkCmdExecuteCommands - Execute a secondary command buffer from a primary command buffer

Description

If any element of pCommandBuffers was not recorded with the COMMAND_BUFFER_USAGE_SIMULTANEOUS_USE_BIT flag, and it was recorded into any other primary command buffer which is currently in the executable or recording state, that primary command buffer becomes invalid.

Valid Usage

Valid Usage (Implicit)

  • pCommandBuffers must be a valid pointer to an array of commandBufferCount valid CommandBuffer handles
  • commandBuffer must be in the recording state
  • The CommandPool that commandBuffer was allocated from must support transfer, graphics, or compute operations
  • commandBuffer must be a primary CommandBuffer
  • commandBufferCount must be greater than 0
  • Both of commandBuffer, and the elements of pCommandBuffers must have been created, allocated, or retrieved from the same Device

Host Synchronization

  • Host access to commandBuffer must be externally synchronized
  • Host access to the CommandPool that commandBuffer was allocated from must be externally synchronized

Command Properties

'

Command Buffer Levels Render Pass Scope Supported Queue Types Pipeline Type
Primary Both Transfer Graphics Compute

See Also

CommandBuffer

data ClearRect Source #

VkClearRect - Structure specifying a clear rectangle

Description

The layers [baseArrayLayer, baseArrayLayer + layerCount) counting from the base layer of the attachment image view are cleared.

See Also

Rect2D, cmdClearAttachments

Constructors

ClearRect 

Fields

Instances

Instances details
Show ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ClearRect :: Type -> Type #

FromCStruct ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearRect Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearRect = D1 ('MetaData "ClearRect" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "ClearRect" 'PrefixI 'True) (S1 ('MetaSel ('Just "rect") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Rect2D) :*: (S1 ('MetaSel ('Just "baseArrayLayer") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :*: S1 ('MetaSel ('Just "layerCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32))))

data ImageSubresourceLayers Source #

VkImageSubresourceLayers - Structure specifying an image subresource layers

Valid Usage

  • aspectMask must not contain IMAGE_ASPECT_METADATA_BIT
  • aspectMask must not include VK_IMAGE_ASPECT_MEMORY_PLANE_i_BIT_EXT for any index i
  • layerCount must be greater than 0

Valid Usage (Implicit)

  • aspectMask must not be 0

See Also

BufferImageCopy, ImageAspectFlags, ImageBlit, ImageCopy, ImageResolve

Constructors

ImageSubresourceLayers 

Fields

Instances

Instances details
Eq ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Show ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ImageSubresourceLayers :: Type -> Type #

Storable ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

FromCStruct ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ImageSubresourceLayers Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ImageSubresourceLayers = D1 ('MetaData "ImageSubresourceLayers" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "ImageSubresourceLayers" 'PrefixI 'True) ((S1 ('MetaSel ('Just "aspectMask") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 ImageAspectFlags) :*: S1 ('MetaSel ('Just "mipLevel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32)) :*: (S1 ('MetaSel ('Just "baseArrayLayer") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :*: S1 ('MetaSel ('Just "layerCount") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32))))

data BufferCopy Source #

VkBufferCopy - Structure specifying a buffer copy operation

Valid Usage

  • The size must be greater than 0

See Also

DeviceSize, cmdCopyBuffer

Constructors

BufferCopy 

Fields

Instances

Instances details
Eq BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Show BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep BufferCopy :: Type -> Type #

Storable BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

FromCStruct BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep BufferCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep BufferCopy = D1 ('MetaData "BufferCopy" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "BufferCopy" 'PrefixI 'True) (S1 ('MetaSel ('Just "srcOffset") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 DeviceSize) :*: (S1 ('MetaSel ('Just "dstOffset") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 DeviceSize) :*: S1 ('MetaSel ('Just "size") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 DeviceSize))))

data ImageCopy Source #

VkImageCopy - Structure specifying an image copy operation

Description

For IMAGE_TYPE_3D images, copies are performed slice by slice starting with the z member of the srcOffset or dstOffset, and copying depth slices. For images with multiple layers, copies are performed layer by layer starting with the baseArrayLayer member of the srcSubresource or dstSubresource and copying layerCount layers. Image data can be copied between images with different image types. If one image is IMAGE_TYPE_3D and the other image is IMAGE_TYPE_2D with multiple layers, then each slice is copied to or from a different layer.

Copies involving a multi-planar image format specify the region to be copied in terms of the plane to be copied, not the coordinates of the multi-planar image. This means that copies accessing the R/B planes of “_422” format images must fit the copied region within half the width of the parent image, and that copies accessing the R/B planes of “_420” format images must fit the copied region within half the width and height of the parent image.

Valid Usage

  • If neither the calling command’s srcImage nor the calling command’s dstImage has a multi-planar image format then the aspectMask member of srcSubresource and dstSubresource must match
  • If the calling command’s srcImage has a Format with two planes then the srcSubresource aspectMask must be IMAGE_ASPECT_PLANE_0_BIT or IMAGE_ASPECT_PLANE_1_BIT
  • If the calling command’s srcImage has a Format with three planes then the srcSubresource aspectMask must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT
  • If the calling command’s dstImage has a Format with two planes then the dstSubresource aspectMask must be IMAGE_ASPECT_PLANE_0_BIT or IMAGE_ASPECT_PLANE_1_BIT
  • If the calling command’s dstImage has a Format with three planes then the dstSubresource aspectMask must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT
  • If the calling command’s srcImage has a multi-planar image format and the dstImage does not have a multi-planar image format, the dstSubresource aspectMask must be IMAGE_ASPECT_COLOR_BIT
  • If the calling command’s dstImage has a multi-planar image format and the srcImage does not have a multi-planar image format, the srcSubresource aspectMask must be IMAGE_ASPECT_COLOR_BIT
  • The number of slices of the extent (for 3D) or layers of the srcSubresource (for non-3D) must match the number of slices of the extent (for 3D) or layers of the dstSubresource (for non-3D)
  • If either of the calling command’s srcImage or dstImage parameters are of ImageType IMAGE_TYPE_3D, the baseArrayLayer and layerCount members of the corresponding subresource must be 0 and 1, respectively
  • The aspectMask member of srcSubresource must specify aspects present in the calling command’s srcImage
  • The aspectMask member of dstSubresource must specify aspects present in the calling command’s dstImage
  • srcOffset.x and (extent.width + srcOffset.x) must both be greater than or equal to 0 and less than or equal to the source image subresource width
  • srcOffset.y and (extent.height + srcOffset.y) must both be greater than or equal to 0 and less than or equal to the source image subresource height
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D, then srcOffset.y must be 0 and extent.height must be 1
  • srcOffset.z and (extent.depth + srcOffset.z) must both be greater than or equal to 0 and less than or equal to the source image subresource depth
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D, then srcOffset.z must be 0 and extent.depth must be 1
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D, then dstOffset.z must be 0 and extent.depth must be 1
  • If the calling command’s srcImage is of type IMAGE_TYPE_2D, then srcOffset.z must be 0
  • If the calling command’s dstImage is of type IMAGE_TYPE_2D, then dstOffset.z must be 0
  • If both srcImage and dstImage are of type IMAGE_TYPE_2D then extent.depth must be 1
  • If the calling command’s srcImage is of type IMAGE_TYPE_2D, and the dstImage is of type IMAGE_TYPE_3D, then extent.depth must equal to the layerCount member of srcSubresource
  • If the calling command’s dstImage is of type IMAGE_TYPE_2D, and the srcImage is of type IMAGE_TYPE_3D, then extent.depth must equal to the layerCount member of dstSubresource
  • dstOffset.x and (extent.width + dstOffset.x) must both be greater than or equal to 0 and less than or equal to the destination image subresource width
  • dstOffset.y and (extent.height + dstOffset.y) must both be greater than or equal to 0 and less than or equal to the destination image subresource height
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D, then dstOffset.y must be 0 and extent.height must be 1
  • dstOffset.z and (extent.depth + dstOffset.z) must both be greater than or equal to 0 and less than or equal to the destination image subresource depth
  • If the calling command’s srcImage is a compressed image, or a single-plane, “_422” image format, all members of srcOffset must be a multiple of the corresponding dimensions of the compressed texel block
  • If the calling command’s srcImage is a compressed image, or a single-plane, “_422” image format, extent.width must be a multiple of the compressed texel block width or (extent.width + srcOffset.x) must equal the source image subresource width
  • If the calling command’s srcImage is a compressed image, or a single-plane, “_422” image format, extent.height must be a multiple of the compressed texel block height or (extent.height + srcOffset.y) must equal the source image subresource height
  • If the calling command’s srcImage is a compressed image, or a single-plane, “_422” image format, extent.depth must be a multiple of the compressed texel block depth or (extent.depth + srcOffset.z) must equal the source image subresource depth
  • If the calling command’s dstImage is a compressed format image, or a single-plane, “_422” image format, all members of dstOffset must be a multiple of the corresponding dimensions of the compressed texel block
  • If the calling command’s dstImage is a compressed format image, or a single-plane, “_422” image format, extent.width must be a multiple of the compressed texel block width or (extent.width + dstOffset.x) must equal the destination image subresource width
  • If the calling command’s dstImage is a compressed format image, or a single-plane, “_422” image format, extent.height must be a multiple of the compressed texel block height or (extent.height + dstOffset.y) must equal the destination image subresource height
  • If the calling command’s dstImage is a compressed format image, or a single-plane, “_422” image format, extent.depth must be a multiple of the compressed texel block depth or (extent.depth + dstOffset.z) must equal the destination image subresource depth

Valid Usage (Implicit)

See Also

Extent3D, ImageSubresourceLayers, Offset3D, cmdCopyImage

Constructors

ImageCopy 

Fields

Instances

Instances details
Show ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ImageCopy :: Type -> Type #

FromCStruct ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

data ImageBlit Source #

VkImageBlit - Structure specifying an image blit operation

Description

For each element of the pRegions array, a blit operation is performed the specified source and destination regions.

Valid Usage

  • The aspectMask member of srcSubresource and dstSubresource must match
  • The layerCount member of srcSubresource and dstSubresource must match
  • If either of the calling command’s srcImage or dstImage parameters are of ImageType IMAGE_TYPE_3D, the baseArrayLayer and layerCount members of both srcSubresource and dstSubresource must be 0 and 1, respectively
  • The aspectMask member of srcSubresource must specify aspects present in the calling command’s srcImage
  • The aspectMask member of dstSubresource must specify aspects present in the calling command’s dstImage
  • srcOffset[0].x and srcOffset[1].x must both be greater than or equal to 0 and less than or equal to the source image subresource width
  • srcOffset[0].y and srcOffset[1].y must both be greater than or equal to 0 and less than or equal to the source image subresource height
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D, then srcOffset[0].y must be 0 and srcOffset[1].y must be 1
  • srcOffset[0].z and srcOffset[1].z must both be greater than or equal to 0 and less than or equal to the source image subresource depth
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D or IMAGE_TYPE_2D, then srcOffset[0].z must be 0 and srcOffset[1].z must be 1
  • dstOffset[0].x and dstOffset[1].x must both be greater than or equal to 0 and less than or equal to the destination image subresource width
  • dstOffset[0].y and dstOffset[1].y must both be greater than or equal to 0 and less than or equal to the destination image subresource height
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D, then dstOffset[0].y must be 0 and dstOffset[1].y must be 1
  • dstOffset[0].z and dstOffset[1].z must both be greater than or equal to 0 and less than or equal to the destination image subresource depth
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D or IMAGE_TYPE_2D, then dstOffset[0].z must be 0 and dstOffset[1].z must be 1

Valid Usage (Implicit)

See Also

ImageSubresourceLayers, Offset3D, cmdBlitImage

Constructors

ImageBlit 

Fields

Instances

Instances details
Show ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ImageBlit :: Type -> Type #

FromCStruct ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ImageBlit Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

data BufferImageCopy Source #

VkBufferImageCopy - Structure specifying a buffer image copy operation

Description

When copying to or from a depth or stencil aspect, the data in buffer memory uses a layout that is a (mostly) tightly packed representation of the depth or stencil data. Specifically:

Note

To copy both the depth and stencil aspects of a depth/stencil format, two entries in pRegions can be used, where one specifies the depth aspect in imageSubresource, and the other specifies the stencil aspect.

Because depth or stencil aspect buffer to image copies may require format conversions on some implementations, they are not supported on queues that do not support graphics.

When copying to a depth aspect, and the VK_EXT_depth_range_unrestricted extension is not enabled, the data in buffer memory must be in the range [0,1], or the resulting values are undefined.

Copies are done layer by layer starting with image layer baseArrayLayer member of imageSubresource. layerCount layers are copied from the source image or to the destination image.

Valid Usage

  • If the calling command’s Image parameter’s format is not a depth/stencil format or a multi-planar format, then bufferOffset must be a multiple of the format’s texel block size
  • If the calling command’s Image parameter’s format is a multi-planar format, then bufferOffset must be a multiple of the element size of the compatible format for the format and the aspectMask of the imageSubresource as defined in https://www.khronos.org/registry/vulkan/specs/1.2-extensions/html/vkspec.html#formats-compatible-planes
  • bufferRowLength must be 0, or greater than or equal to the width member of imageExtent
  • bufferImageHeight must be 0, or greater than or equal to the height member of imageExtent
  • imageOffset.x and (imageExtent.width + imageOffset.x) must both be greater than or equal to 0 and less than or equal to the image subresource width where this refers to the width of the plane of the image involved in the copy in the case of a multi-planar format
  • imageOffset.y and (imageExtent.height + imageOffset.y) must both be greater than or equal to 0 and less than or equal to the image subresource height where this refers to the height of the plane of the image involved in the copy in the case of a multi-planar format
  • If the calling command’s srcImage (cmdCopyImageToBuffer) or dstImage (cmdCopyBufferToImage) is of type IMAGE_TYPE_1D, then imageOffset.y must be 0 and imageExtent.height must be 1
  • imageOffset.z and (imageExtent.depth + imageOffset.z) must both be greater than or equal to 0 and less than or equal to the image subresource depth
  • If the calling command’s srcImage (cmdCopyImageToBuffer) or dstImage (cmdCopyBufferToImage) is of type IMAGE_TYPE_1D or IMAGE_TYPE_2D, then imageOffset.z must be 0 and imageExtent.depth must be 1
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, bufferRowLength must be a multiple of the compressed texel block width
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, bufferImageHeight must be a multiple of the compressed texel block height
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, all members of imageOffset must be a multiple of the corresponding dimensions of the compressed texel block
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, bufferOffset must be a multiple of the compressed texel block size in bytes
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, imageExtent.width must be a multiple of the compressed texel block width or (imageExtent.width + imageOffset.x) must equal the image subresource width
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, imageExtent.height must be a multiple of the compressed texel block height or (imageExtent.height + imageOffset.y) must equal the image subresource height
  • If the calling command’s Image parameter is a compressed image, or a single-plane, “_422” image format, imageExtent.depth must be a multiple of the compressed texel block depth or (imageExtent.depth + imageOffset.z) must equal the image subresource depth
  • The aspectMask member of imageSubresource must specify aspects present in the calling command’s Image parameter
  • If the calling command’s Image parameter’s format is a multi-planar format, then the aspectMask member of imageSubresource must be IMAGE_ASPECT_PLANE_0_BIT, IMAGE_ASPECT_PLANE_1_BIT, or IMAGE_ASPECT_PLANE_2_BIT (with IMAGE_ASPECT_PLANE_2_BIT valid only for image formats with three planes)
  • The aspectMask member of imageSubresource must only have a single bit set
  • If the calling command’s Image parameter is of ImageType IMAGE_TYPE_3D, the baseArrayLayer and layerCount members of imageSubresource must be 0 and 1, respectively

Valid Usage (Implicit)

See Also

DeviceSize, Extent3D, ImageSubresourceLayers, Offset3D, cmdCopyBufferToImage, cmdCopyImageToBuffer

Constructors

BufferImageCopy 

Fields

  • bufferOffset :: DeviceSize

    bufferOffset is the offset in bytes from the start of the buffer object where the image data is copied from or to.

  • bufferRowLength :: Word32

    bufferRowLength and bufferImageHeight specify in texels a subregion of a larger two- or three-dimensional image in buffer memory, and control the addressing calculations. If either of these values is zero, that aspect of the buffer memory is considered to be tightly packed according to the imageExtent.

  • bufferImageHeight :: Word32
     
  • imageSubresource :: ImageSubresourceLayers

    imageSubresource is a ImageSubresourceLayers used to specify the specific image subresources of the image used for the source or destination image data.

  • imageOffset :: Offset3D

    imageOffset selects the initial x, y, z offsets in texels of the sub-region of the source or destination image data.

  • imageExtent :: Extent3D

    imageExtent is the size in texels of the image to copy in width, height and depth.

Instances

Instances details
Show BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep BufferImageCopy :: Type -> Type #

FromCStruct BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep BufferImageCopy Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

data ImageResolve Source #

VkImageResolve - Structure specifying an image resolve operation

Valid Usage

  • The layerCount member of srcSubresource and dstSubresource must match
  • If either of the calling command’s srcImage or dstImage parameters are of ImageType IMAGE_TYPE_3D, the baseArrayLayer and layerCount members of both srcSubresource and dstSubresource must be 0 and 1, respectively
  • srcOffset.x and (extent.width + srcOffset.x) must both be greater than or equal to 0 and less than or equal to the source image subresource width
  • srcOffset.y and (extent.height + srcOffset.y) must both be greater than or equal to 0 and less than or equal to the source image subresource height
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D, then srcOffset.y must be 0 and extent.height must be 1
  • srcOffset.z and (extent.depth + srcOffset.z) must both be greater than or equal to 0 and less than or equal to the source image subresource depth
  • If the calling command’s srcImage is of type IMAGE_TYPE_1D or IMAGE_TYPE_2D, then srcOffset.z must be 0 and extent.depth must be 1
  • dstOffset.x and (extent.width + dstOffset.x) must both be greater than or equal to 0 and less than or equal to the destination image subresource width
  • dstOffset.y and (extent.height + dstOffset.y) must both be greater than or equal to 0 and less than or equal to the destination image subresource height
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D, then dstOffset.y must be 0 and extent.height must be 1
  • dstOffset.z and (extent.depth + dstOffset.z) must both be greater than or equal to 0 and less than or equal to the destination image subresource depth
  • If the calling command’s dstImage is of type IMAGE_TYPE_1D or IMAGE_TYPE_2D, then dstOffset.z must be 0 and extent.depth must be 1

Valid Usage (Implicit)

See Also

Extent3D, ImageSubresourceLayers, Offset3D, cmdResolveImage

Constructors

ImageResolve 

Fields

Instances

Instances details
Show ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ImageResolve :: Type -> Type #

FromCStruct ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ImageResolve Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

data RenderPassBeginInfo (es :: [Type]) Source #

VkRenderPassBeginInfo - Structure specifying render pass begin info

Description

renderArea is the render area that is affected by the render pass instance. The effects of attachment load, store and multisample resolve operations are restricted to the pixels whose x and y coordinates fall within the render area on all attachments. The render area extends to all layers of framebuffer. The application must ensure (using scissor if necessary) that all rendering is contained within the render area. The render area, after any transform specified by RenderPassTransformBeginInfoQCOM::transform is applied, must be contained within the framebuffer dimensions.

If render pass transform is enabled, then renderArea must equal the framebuffer pre-transformed dimensions. After renderArea has been transformed by RenderPassTransformBeginInfoQCOM::transform, the resulting render area must be equal to the framebuffer dimensions.

When multiview is enabled, the resolve operation at the end of a subpass applies to all views in the view mask.

Note

There may be a performance cost for using a render area smaller than the framebuffer, unless it matches the render area granularity for the render pass.

Valid Usage

  • clearValueCount must be greater than the largest attachment index in renderPass that specifies a loadOp (or stencilLoadOp, if the attachment has a depth/stencil format) of ATTACHMENT_LOAD_OP_CLEAR

Valid Usage (Implicit)

See Also

ClearValue, Framebuffer, Rect2D, RenderPass, StructureType, cmdBeginRenderPass, cmdBeginRenderPass2, cmdBeginRenderPass2KHR

Constructors

RenderPassBeginInfo 

Fields

  • next :: Chain es

    pNext is NULL or a pointer to a structure extending this structure.

  • renderPass :: RenderPass

    renderPass is the render pass to begin an instance of.

  • framebuffer :: Framebuffer

    framebuffer is the framebuffer containing the attachments that are used with the render pass.

  • renderArea :: Rect2D

    renderArea is the render area that is affected by the render pass instance, and is described in more detail below.

  • clearValues :: Vector ClearValue

    pClearValues is a pointer to an array of clearValueCount ClearValue structures that contains clear values for each attachment, if the attachment uses a loadOp value of ATTACHMENT_LOAD_OP_CLEAR or if the attachment has a depth/stencil format and uses a stencilLoadOp value of ATTACHMENT_LOAD_OP_CLEAR. The array is indexed by attachment number. Only elements corresponding to cleared attachments are used. Other elements of pClearValues are ignored.

Instances

Instances details
Extensible RenderPassBeginInfo Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Methods

extensibleType :: StructureType Source #

getNext :: forall (es :: [Type]). RenderPassBeginInfo es -> Chain es Source #

setNext :: forall (ds :: [Type]) (es :: [Type]). RenderPassBeginInfo ds -> Chain es -> RenderPassBeginInfo es Source #

extends :: forall e b proxy. Typeable e => proxy e -> (Extends RenderPassBeginInfo e => b) -> Maybe b Source #

Show (Chain es) => Show (RenderPassBeginInfo es) Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic (RenderPassBeginInfo es) Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep (RenderPassBeginInfo es) :: Type -> Type #

(Extendss RenderPassBeginInfo es, PokeChain es) => ToCStruct (RenderPassBeginInfo es) Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

es ~ ('[] :: [Type]) => Zero (RenderPassBeginInfo es) Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep (RenderPassBeginInfo es) Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep (RenderPassBeginInfo es) = D1 ('MetaData "RenderPassBeginInfo" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "RenderPassBeginInfo" 'PrefixI 'True) ((S1 ('MetaSel ('Just "next") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Chain es)) :*: S1 ('MetaSel ('Just "renderPass") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 RenderPass)) :*: (S1 ('MetaSel ('Just "framebuffer") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Framebuffer) :*: (S1 ('MetaSel ('Just "renderArea") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Rect2D) :*: S1 ('MetaSel ('Just "clearValues") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Vector ClearValue))))))

data ClearDepthStencilValue Source #

VkClearDepthStencilValue - Structure specifying a clear depth stencil value

Valid Usage

  • Unless the VK_EXT_depth_range_unrestricted extension is enabled depth must be between 0.0 and 1.0, inclusive

See Also

ClearValue, cmdClearDepthStencilImage

Constructors

ClearDepthStencilValue 

Fields

  • depth :: Float

    depth is the clear value for the depth aspect of the depth/stencil attachment. It is a floating-point value which is automatically converted to the attachment’s format.

  • stencil :: Word32

    stencil is the clear value for the stencil aspect of the depth/stencil attachment. It is a 32-bit integer value which is converted to the attachment’s format by taking the appropriate number of LSBs.

Instances

Instances details
Eq ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Show ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ClearDepthStencilValue :: Type -> Type #

Storable ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

FromCStruct ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

ToCStruct ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearDepthStencilValue Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearDepthStencilValue = D1 ('MetaData "ClearDepthStencilValue" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "ClearDepthStencilValue" 'PrefixI 'True) (S1 ('MetaSel ('Just "depth") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Float) :*: S1 ('MetaSel ('Just "stencil") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32)))

data ClearAttachment Source #

VkClearAttachment - Structure specifying a clear attachment

Description

No memory barriers are needed between cmdClearAttachments and preceding or subsequent draw or attachment clear commands in the same subpass.

The cmdClearAttachments command is not affected by the bound pipeline state.

Attachments can also be cleared at the beginning of a render pass instance by setting loadOp (or stencilLoadOp) of AttachmentDescription to ATTACHMENT_LOAD_OP_CLEAR, as described for createRenderPass.

Valid Usage

  • aspectMask must not include IMAGE_ASPECT_METADATA_BIT
  • aspectMask must not include VK_IMAGE_ASPECT_MEMORY_PLANE_i_BIT_EXT for any index i
  • clearValue must be a valid ClearValue union

Valid Usage (Implicit)

  • aspectMask must not be 0

See Also

ClearValue, ImageAspectFlags, cmdClearAttachments

Constructors

ClearAttachment 

Fields

Instances

Instances details
Show ClearAttachment Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Generic ClearAttachment Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Associated Types

type Rep ClearAttachment :: Type -> Type #

ToCStruct ClearAttachment Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

Zero ClearAttachment Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearAttachment Source # 
Instance details

Defined in Vulkan.Core10.CommandBufferBuilding

type Rep ClearAttachment = D1 ('MetaData "ClearAttachment" "Vulkan.Core10.CommandBufferBuilding" "vulkan-3.4-inplace" 'False) (C1 ('MetaCons "ClearAttachment" 'PrefixI 'True) (S1 ('MetaSel ('Just "aspectMask") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 ImageAspectFlags) :*: (S1 ('MetaSel ('Just "colorAttachment") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Word32) :*: S1 ('MetaSel ('Just "clearValue") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 ClearValue))))

newtype IndexType Source #

Constructors

IndexType Int32 

Bundled Patterns

pattern INDEX_TYPE_UINT16 :: IndexType

INDEX_TYPE_UINT16 specifies that indices are 16-bit unsigned integer values.

pattern INDEX_TYPE_UINT32 :: IndexType

INDEX_TYPE_UINT32 specifies that indices are 32-bit unsigned integer values.

pattern INDEX_TYPE_UINT8_EXT :: IndexType

INDEX_TYPE_UINT8_EXT specifies that indices are 8-bit unsigned integer values.

pattern INDEX_TYPE_NONE_KHR :: IndexType

INDEX_TYPE_NONE_KHR specifies that no indices are provided.

Instances

Instances details
Eq IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

Ord IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

Read IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

Show IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

Storable IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

Zero IndexType Source # 
Instance details

Defined in Vulkan.Core10.Enums.IndexType

newtype SubpassContents Source #

VkSubpassContents - Specify how commands in the first subpass of a render pass are provided

See Also

SubpassBeginInfo, cmdBeginRenderPass, cmdNextSubpass

Constructors

SubpassContents Int32 

Bundled Patterns

pattern SUBPASS_CONTENTS_INLINE :: SubpassContents

SUBPASS_CONTENTS_INLINE specifies that the contents of the subpass will be recorded inline in the primary command buffer, and secondary command buffers must not be executed within the subpass.

pattern SUBPASS_CONTENTS_SECONDARY_COMMAND_BUFFERS :: SubpassContents

SUBPASS_CONTENTS_SECONDARY_COMMAND_BUFFERS specifies that the contents are recorded in secondary command buffers that will be called from the primary command buffer, and cmdExecuteCommands is the only valid command on the command buffer until cmdNextSubpass or cmdEndRenderPass.

Instances

Instances details
Eq SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

Ord SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

Read SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

Show SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

Storable SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

Zero SubpassContents Source # 
Instance details

Defined in Vulkan.Core10.Enums.SubpassContents

newtype StencilFaceFlagBits Source #

VkStencilFaceFlagBits - Bitmask specifying sets of stencil state for which to update the compare mask

See Also

StencilFaceFlags

Bundled Patterns

pattern STENCIL_FACE_FRONT_BIT :: StencilFaceFlagBits

STENCIL_FACE_FRONT_BIT specifies that only the front set of stencil state is updated.

pattern STENCIL_FACE_BACK_BIT :: StencilFaceFlagBits

STENCIL_FACE_BACK_BIT specifies that only the back set of stencil state is updated.

pattern STENCIL_FACE_FRONT_AND_BACK :: StencilFaceFlagBits

STENCIL_FACE_FRONT_AND_BACK is the combination of STENCIL_FACE_FRONT_BIT and STENCIL_FACE_BACK_BIT, and specifies that both sets of stencil state are updated.

Instances

Instances details
Eq StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Ord StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Read StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Show StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Storable StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Bits StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits

Zero StencilFaceFlagBits Source # 
Instance details

Defined in Vulkan.Core10.Enums.StencilFaceFlagBits