SubHask is a radical rewrite of the Haskell Prelude.
The goal is to make numerical computing in Haskell fun and fast.
The main idea is to use a type safe interface for programming in arbitrary subcategories of Hask.
For example, the category Vect of linear functions is a subcategory of Hask, and SubHask exploits this fact to give a nice interface for linear algebra.
To achieve this goal, almost every class hierarchy is redefined to be more general.
SubHask is a work in progress.
This README is intended to be a "quick start guide" to get you familiar with the current status and major differences from standard Haskell.
Table of contents:
SubHask depends on:
GHC >= 7.10.
You can download the latest version of GHC here.
llvm >= 3.5, llvm < 3.6.
To install on Linux or Mac, run the following commands:
$ wget http://llvm.org/releases/3.5.2/llvm-3.5.2.src.tar.xz
$ tar -xf llvm-3.5.2.src.tar.xz
$ cd llvm-3.5.2
$ mkdir build
$ cmake ..
$ make -j5
$ sudo make install
Any version of BLAS and LAPACK.
How to install these packages varies for different operating systems.
For Debian/Ubuntu systems, you can install them using:
$ sudo apt-get install libblas-dev liblapack-dev
SubHask also has strict dependency requirements on other Haskell packages.
Therefore, I recommend installing in a sandbox.
The following steps will create a project called
$ mkdir subhask-test
$ cd subhask-test
$ cabal update
$ cabal sandbox init
$ cabal install subhask -j5
The cabal install command takes about an hour to run on my laptop.
See the examples folder for the literate haskell files.
New Class Hierarchies
The modified category hierarchy closely follows the presentation in the Rosetta Stone paper.
The image below shows the category hierarchy:
Concrete categories are functions that have been annotated with special properties.
More formally, a
Concrete category is one that is a subtype of
Subtyping is not a builtin feature of the Haskell language, but we simulate subtyping using the class
See the documentation in SubHask.SubType for more details.
SubHask contains implementations of both categories and what I call "category transformers."
A category transformer creates a type corresponding to a subcategory in the original category.
For example, we can use the category transformer
MonT :: (* -> * -> *) -> * -> * -> * to construct the category
MonT (->) :: * -> * -> *, which corresponds to the category of monotonic functions.
See the SubHask.Category.Trans.Monotonic module for details.
The categories can be found in the
and transformers can be found in
The design of these transformers roughly follows that of the mtl library to allow for composition of transformers.
I have removed the
Arrow hierarchy in favor of a more principled approach.
Arrow's functionality has also been removed since I've never found a use for it,
but it will probably be added at a future point as SubHask matures.
In the standard Prelude, the
Functor type class corresponds to "endofunctors on the category Hask".
SubHask generalizes this definition to endofunctors on any category:
class Category cat => Functor cat f where
fmap :: cat a b -> cat (f a) (f b)
The image below shows the functor hierarchy:
The dashed lines above mean that the
Monad instances can depend on a category.
This modified functor hierarchy gives us a lot of power.
For example, we can finally make
Set an instance of
Set is an instance of
Monad in two separate categories:
the category of functions with an
Ord constraint (i.e.
and the category of monotonic functions (i.e.
MonT (->) mentioned above).
Semantically, both have the same meaning, but the monotonic
fmap runs faster.
We've introduced a new class
Then that does not depend on the
This class is a hack to make monads play nice with do notation;
it's only member function is the
There's probably something deep going on here that I'm just not aware of.
Notice that the
Applicative class is not a super class of
While it's true that every
Hask is also an
this does not appear to be true for arbitrary categories.
At least it's definitely not true given the current definition of the
Category class I've defined.
I'm not sure if that's a limitation of my design or something more fundamental.
The functor hierarchy is much smaller than the functor hierarchy available with base.
I haven't included Prelude classes like
Alternative, and I haven't included all of the classes Edward Kmett is famous for (see e.g. category-extras).
All of these class can in principle be extended to the more generic setting of SubHask, I just haven't gotten around to it yet.
Lens is the most famous package that uses the extended funtor hierarchy.
As-is, the current version of lens is fully compatible with SubHask;
however, the container hierarchy below obviates the need for most of the fancy lenses.
Eventually, I'd like to implement lenses in arbitrary categories.
For example, you could use a monotonic lens to guantee updates to a data structure are monotonic.
I haven't done very much work on this yet though.
Another interesting category theoretic Kmett library is hask.
Everything in that library can be translated to SubHask, but that's not something I've done yet.
SubHask's comparison hierarchy is significantly more complicated than Prelude's.
It is directly inspired by order theory and non-classical logic.
The hierarchy is shown in the following image:
A type in SubHask can be compared using non-classical logics.
Consider the type of equality comparison:
(==) :: Eq_ a => a -> a -> Logic a
The return value is given by the type family
Logic a, which specifies the logical system used on the type
For most types,
Logic a will be
Bool, and everything will behave as you would expect.
But this more general type lets us define equality on types for which classical equality is either uncomputable, undefined, or not what we actually want.
Consider the case of functions.
Classical equality over functions is uncomputable.
But in SubHask, we define:
type instance Logic (a -> b) = a -> Logic b
class Eq_ b => Eq_ (a -> b) where
(f==g) a = f a == g a
This non-classical logic simplifies many situations.
For example, we can use the
(||) operators on functions:
ghci> filter ( (>='c') && (<'f') || (=='q') ) ['a'..'z']
I have a hunch this will make for a nice probabalistic programming interface,
but I could turn out completely wrong.
Eq type class corresponds to the idea of equivalence classes in algebra.
There are much more general notions of equality that are well studied, e.g. tolerance classes.
I've been careful to design the existing comparison hierarchy so that it will be easy to add these more general notions of equality at some point in the future.
SubHask's container hierarchy is inspired by the mono-traversable and classy-prelude packages.
These packages use type families to make the standard type classes applicable to more data types.
For example, they can make
ByteString an instance of
Foldable, whereas the Prelude classes cannot.
This makes code look more generic, but unfortunately these packages' classes come with no laws.
In contrast, SubHask provides a clear and useful set of laws for each type class.
The container laws are closely related to the axioms of set theory.
The main two differences are that SubHask's laws handle the case of non-commutative containers but don't bother with infinitely sized containers.
See the automated-testing section below for more details on class laws.
The container hierarchy is shown in the image below:
Important points about containers:
The container hierarchy is general enough to support very weird containers.
Containers like HyperLogLogs and BloomFilters fit nicely in the hierarchy and don't need to implement their own non-standard interface.
This makes generic programming much easier.
SubHask makes a clear distinction between vectors and arrays.
A vector in SubHask is not a generic container (like it is in the C++ STL or Haskell's vector package).
That's what arrays are for.
Vectors are elements of a vector space and subject to an entirely different set of laws (discussed in the numeric hierarchy section below).
The array types can be found in the SubHask.Algebra.Array module, and internally use the vector package for its nice fusion abilities.
One nice result of the vector/array distinction is that it becomes easy to make unboxed arrays of unboxed vectors.
Unboxing the vectors within the array is crucial for high performance numeric operations, but it is not supported by standard Haskell.
Most Haskell data structures have two versions: a strict version and lazy version.
Standard Haskell packages use a separate module for each version.
The classic example is the containers library exporting a lazy
Map type in
Data.Map and a strict
Using these types requires qualified imports and makes code less generic.
In SubHask, you can access the containers package by importing
This module exports
Map as a lazy map and
Map' as a strict map.
In general, the prime symbol on a type signifies that it is a strict variant of the unprimed type.
In practice, I've found this makes code much easier to read.
There's actually two separate container hierarchies.
Indexed containers (classes are prefixed with
Ix) and non-indexed containers (classes have no prefix).
An example of an indexed container would be
Map and a non-indexed container would be
Some types, like arrays and lists are both indexed and non-indexed.
The classes in the functor hierarchy don't relate to the classes in the container hierarchy.
This is a code smell that's caused by some of the limitations in Haskell's type system.
See the limitations section below for details.
- There is very little established mathematics about non-commutative containers.
Therefore this hierarchy is not yet as well principled as the other hierarchies.
It has the least stable interface.
SubHask is directly inspired by a lot of good existing work on improving Haskell's numeric support.
The hmatrix package provides fast matrix operations via LAPACK and BLAS.
One of hmatrix's design goals is to maintain compatibility with the standard Prelude, and this makes hmatrix's class hierarchy confusing to work with.
Because SubHask does not maintain Prelude compatibility, we can have an interface that aligns more closely with the math.
Matrix type is currently implemented via hmatrix.
In the future, I hope to make SubHask faster by supporting multiple backends like:
- accelerate, for GPU based linear algebra
- bed-and-breakfast, a native haskell implementation that would allow matrices of the
- eigen, bindings to the C++ Eigen library supporting dense and sparse formats
- hblas, which supports more dense matrix formats
There's nothing difficult about adding these bindings.
It's just time consuming, which is why I haven't done it yet.
The algebra and numeric-prelude packages provide substantial rewrites of the
Num class hierarchy.
These packages are excellent, but they have the following limitations:
They only redefine the
Num hierarchy is closely related to each of the other hierarchies.
I've found that redefining the other hierarchies greatly simplified numeric programming.
They don't have built-in linear algebra support, whereas SubHask does.
They don't take advantage of GHC's more recent type system improvements.
SubHask is able to simplify some of the interfaces
There are still a few warts in SubHask's interface, however, caused by limitations in GHC's type system.
They don't provide an automated test suite, whereas SubHask does.
See the automated testing section below for details on how SubHask handles this.
Finally, many numeric packages try to extend the existing Prelude without breaking compatibility.
linear provides a vector hierarchy that exists on top of
It's widely used on projects that require low dimensional matrices,
but performance is lacking for higher dimensional applications.
monoid-subclasses provides (as the name suggests) subclasses of monoid.
Between the modified numeric and container hierarchies, SubHask supports everything monoid-subclasses does with a simpler interface.
You can see it in the image below:
There are two main branches of the numeric hierarchy.
Along the bottom branch is the ring hierarchy.
Along the top branch is the branch for linear algebra.
Morally, every instance of a class in the ring hierarchy is also an instance of the equivalent class in the linear algebra hierarchy.
For example, every field can be considered as a one-dimensional vector.
I would like to formalize this connection, but it's current impossible.
Non-exact implementations using floating point are allowed.
Currently, these implementations break the laws of the classes, but only slightly.
I intend to generalize the laws so that non-exact implementations are law abiding.
There are currently over 1000 quickcheck properties being checked in the test suite.
But I didn't write any of these tests by hand.
Whenever I implement a new data type, template haskell functions add appropriate tests to the test suite automatically.
I literally don't have to think at all about writing tests and I still get the full benefits.
Here's how it works.
Each class in the new hierarchies above comes with a set of laws they must obey.
Those laws are documented using quickcheck properties.
These properties fully describe the intended behavior of the class,
and any instance that passes the quickcheck tests is a valid instance of the class.
For example, the
Eq class is intended to capture the notion of equivalence classes from algebra.
The class definition is:
class Eq_ a where
(==) :: a -> a -> Logic a
(/=) :: a -> a -> Logic a
and the quickcheck properties are:
law_Eq_reflexive :: Eq a => a -> Logic a
law_Eq_reflexive a = a==a
law_Eq_symmetric :: Eq a => a -> a -> Logic a
law_Eq_symmetric a1 a2 = (a1==a2) == (a2==a1)
law_Eq_transitive :: Eq a => a -> a -> a -> Logic a
law_Eq_transitive a1 a2 a3 = (a1==a2&&a2==a3) ==> (a1==a3)
defn_Eq_noteq :: (Complemented (Logic a), Eq a) => a -> a -> Logic a
defn_Eq_noteq a1 a2 = (a1/=a2) == (not $ a1==a2)
The three properties prefixed with
law capture the laws of the equivalence classes and the property prefixed with
defn shows how the operators
(/=) must relate to each other.
You can use these laws to automatically test any data types you implement.
All you have to do is call the
mkSpecializedClassTests template haskell function on the type you want to test.
This function constructs the test cases and adds them to the test suite.
See the /tests/TestSuite.hs for how to use the function.
The module SubHask.TemplateHaskell.Test contains the actual implementation.
The existing interface is pretty convenient, but I think it should be automated even more.
There's a minor limitation in template haskell that currently prevents full automation (see #9699).
SubHask is far from production ready.
There are roughly three causes of SubHask's limitations:
A lot of the type signatures within SubHask are messier than they need to be due to limitations with GHC's type system.
I wish I could use the
forall keyword within constraints (see #2893 and #5927).
SubHask uses a lot of type families, some of which are injective.
We can't currently take advantage of injectivity, but adding support to GHC is being actively worked on (see #6018).
A few of the invariants that are supposed to be maintained in SubHask's hierarchies can't be mechanically enforced because GHC doesn't allow cycles in the class hierarchy (see #10592).
Some of the abstractions aren't quite right yet and will change in the future.
I expect that as I write more programs that depend on SubHask, these abstractions will flesh themselves out a bit.
There's a lot of grunt work that I just haven't had time for.
For example, the current implementation of the derivative category transformer in SubHask.Category.Trans.Derivative only supports forward mode automatic differentiation.
Adding backwards mode support doesn't require any new ideas, just a couple hours of work.
There are currently 118
FIXME comments in the source documenting similar limitations.
A great, beginner friendly way to contribute to SubHask would be to find one of these limitations that interests you and fix it :)