http-common-0.8.2.1: Common types for HTTP clients and servers

Safe HaskellNone
LanguageHaskell2010

Network.Http.Types

Contents

Description

Basic types used in HTTP communications. This modules is re-exported by both Network.Http.Client and Pipes.Http.Client, so if you're using either of those you don't need to explicitly import this module.

Synopsis

Requests

data Request Source #

A description of the request that will be sent to the server. Note unlike other HTTP libraries, the request body is not a part of this object; that will be streamed out by you when actually sending the request with sendRequest.

Request has a useful Show instance that will output the request line and headers (as it will be sent over the wire but with the \r characters stripped) which can be handy for debugging.

Note that the actual Host: header is not set until the request is sent, so you will not see it in the Show instance (unless you call setHostname to override the value inherited from the Connection).

Instances
Eq Request Source # 
Instance details

Defined in Network.Http.Internal

Methods

(==) :: Request -> Request -> Bool #

(/=) :: Request -> Request -> Bool #

Show Request Source # 
Instance details

Defined in Network.Http.Internal

HttpType Request Source # 
Instance details

Defined in Network.Http.Internal

MonadState Request RequestBuilder Source # 
Instance details

Defined in Network.Http.RequestBuilder

data RequestBuilder α Source #

The RequestBuilder monad allows you to abuse do-notation to conveniently setup a Request object.

buildRequest :: Monad ν => RequestBuilder α -> ν Request Source #

Run a RequestBuilder from within a monadic action.

Older versions of this library had buildRequest in IO; there's no longer a need for that, but this code path will continue to work for existing users.

    q <- buildRequest $ do
             http GET "/"

buildRequest1 :: RequestBuilder α -> Request Source #

Run a RequestBuilder, yielding a Request object you can use on the given connection.

    let q = buildRequest1 $ do
                http POST "/api/v1/messages"
                setContentType "application/json"
                setHostname "clue.example.com" 80
                setAccept "text/html"
                setHeader "X-WhoDoneIt" "The Butler"

Obviously it's up to you to later actually send JSON data.

http :: Method -> ByteString -> RequestBuilder () Source #

Begin constructing a Request, starting with the request line.

setHostname :: Hostname -> Port -> RequestBuilder () Source #

Set the [virtual] hostname for the request. In ordinary conditions you won't need to call this, as the Host: header is a required header in HTTP 1.1 and is set directly from the name of the server you connected to when calling openConnection.

setAccept :: ByteString -> RequestBuilder () Source #

Indicate the content type you are willing to receive in a reply from the server. For more complex Accept: headers, use setAccept'.

setAccept' :: [(ByteString, Float)] -> RequestBuilder () Source #

Indicate the content types you are willing to receive in a reply from the server in order of preference. A call of the form:

        setAccept' [("text/html", 1.0),
                    ("application/xml", 0.8),
                    ("*/*", 0)]

will result in an Accept: header value of text/html; q=1.0, application/xml; q=0.8, */*; q=0.0 as you would expect.

setAuthorizationBasic :: ByteString -> ByteString -> RequestBuilder () Source #

Set username and password credentials per the HTTP basic authentication method.

        setAuthorizationBasic "Aladdin" "open sesame"

will result in an Authorization: header value of Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ==.

Basic authentication does not use a message digest function to encipher the password; the above string is only base-64 encoded and is thus plain-text visible to any observer on the wire and all caches and servers at the other end, making basic authentication completely insecure. A number of web services, however, use SSL to encrypt the connection that then use HTTP basic authentication to validate requests. Keep in mind in these cases the secret is still sent to the servers on the other side and passes in clear through all layers after the SSL termination. Do not use basic authentication to protect secure or user-originated privacy-sensitve information.

setContentType :: ContentType -> RequestBuilder () Source #

Set the MIME type corresponding to the body of the request you are sending. Defaults to "text/plain", so usually you need to set this if PUTting.

setContentLength :: Int64 -> RequestBuilder () Source #

Specify the length of the request body, in bytes.

RFC 2616 requires that we either send a Content-Length header or use Transfer-Encoding: chunked. If you know the exact size ahead of time, then call this function; the body content will still be streamed out by io-streams in more-or-less constant space.

This function is special: in a PUT or POST request, http-streams will assume chunked transfer-encoding unless you specify a content length here, in which case you need to ensure your body function writes precisely that many bytes.

setExpectContinue :: RequestBuilder () Source #

Specify that this request should set the expectation that the server needs to approve the request before you send it.

This function is special: in a PUT or POST request, http-streams will wait for the server to reply with an HTTP/1.1 100 Continue status before sending the entity body. This is handled internally; you will get the real response (be it successful 2xx, client error, 4xx, or server error 5xx) in receiveResponse. In theory, it should be 417 if the expectation failed.

Only bother with this if you know the service you're talking to requires clients to send an Expect: 100-continue header and will handle it properly. Most servers don't do any precondition checking, automatically send an intermediate 100 response, and then just read the body regardless, making this a bit of a no-op in most cases.

setTransferEncoding :: RequestBuilder () Source #

Override the default setting about how the entity body will be sent.

This function is special: this explicitly sets the Transfer-Encoding: header to chunked and will instruct the library to actually tranfer the body as a stream ("chunked transfer encoding"). See setContentLength for forcing the opposite. You really won't need this in normal operation, but some people are control freaks.

setHeader :: ByteString -> ByteString -> RequestBuilder () Source #

Set a generic header to be sent in the HTTP request. The other methods in the RequestBuilder API are expressed in terms of this function, but we recommend you use them where offered for their stronger types.

Responses

data Response Source #

A description of the response received from the server. Note unlike other HTTP libraries, the response body is not a part of this object; that will be streamed in by you when calling receiveResponse.

Like Request, Response has a Show instance that will output the status line and response headers as they were received from the server.

Instances
Show Response Source # 
Instance details

Defined in Network.Http.Internal

HttpType Response Source # 
Instance details

Defined in Network.Http.Internal

data TransferEncoding Source #

Constructors

None 
Chunked 

getStatusCode :: Response -> StatusCode Source #

Get the HTTP response status code.

getStatusMessage :: Response -> ByteString Source #

Get the HTTP response status message. Keep in mind that this is not normative; whereas getStatusCode values are authoritative.

getHeader :: Response -> ByteString -> Maybe ByteString Source #

Lookup a header in the response. HTTP header field names are case-insensitive, so you can specify the name to lookup however you like. If the header is not present Nothing will be returned.

    let n = case getHeader p "Content-Length" of
               Just x' -> read x' :: Int
               Nothing -> 0

which of course is essentially what goes on inside the client library when it receives a response from the server and has to figure out how many bytes to read.

There is a fair bit of complexity in some of the other HTTP response fields, so there are a number of specialized functions for reading those values where we've found them useful.

data Method Source #

HTTP Methods, as per RFC 2616

Instances
Eq Method Source # 
Instance details

Defined in Network.Http.Internal

Methods

(==) :: Method -> Method -> Bool #

(/=) :: Method -> Method -> Bool #

Ord Method Source # 
Instance details

Defined in Network.Http.Internal

Read Method Source # 
Instance details

Defined in Network.Http.Internal

Show Method Source # 
Instance details

Defined in Network.Http.Internal

Headers

data Headers Source #

The map of headers in a Request or Response. Note that HTTP header field names are case insensitive, so if you call setHeader on a field that's already defined but with a different capitalization you will replace the existing value.

Instances
Eq Headers Source # 
Instance details

Defined in Network.Http.Internal

Methods

(==) :: Headers -> Headers -> Bool #

(/=) :: Headers -> Headers -> Bool #

Show Headers Source # 
Instance details

Defined in Network.Http.Internal

updateHeader :: Headers -> ByteString -> ByteString -> Headers Source #

Set a header field to the specified value. This will overwrite any existing value for the field. Remember that HTTP fields names are case insensitive!

removeHeader :: Headers -> ByteString -> Headers Source #

Remove a header from the map. If a field with that name is not present, then this will have no effect.

buildHeaders :: [(ByteString, ByteString)] -> Headers Source #

Given a list of field-name,field-value pairs, construct a Headers map.

retrieveHeaders :: Headers -> [(ByteString, ByteString)] Source #

Get the headers as a field-name,field-value association list.

class HttpType τ where Source #

Accessors common to both the outbound and return sides of an HTTP connection.

Methods

getHeaders :: τ -> Headers Source #

Get the Headers from a Request or Response. Most people do not need this; for most cases you just need to get a header or two from the response, for which you can use getHeader. On the other hand, if you do need to poke around in the raw headers,

 import Network.Http.Types

will give you functions like lookupHeader and updateHeader to to work with.

Instances
HttpType Response Source # 
Instance details

Defined in Network.Http.Internal

HttpType Request Source # 
Instance details

Defined in Network.Http.Internal

Exceptions