| Copyright | (C) 2015-2016 University of Twente 2019 Myrtle Software Ltd 2017 Google Inc. 2021-2022 QBayLogic B.V. |
|---|---|
| License | BSD2 (see the file LICENSE) |
| Maintainer | QBayLogic B.V. <devops@qbaylogic.com> |
| Safe Haskell | Unsafe |
| Language | Haskell2010 |
| Extensions |
|
Clash.Prelude.BlockRam.File
Description
Initializing a block RAM with a data file
Block RAM primitives that can be initialized with a data file. The BNF grammar for this data file is simple:
FILE = LINE+
LINE = BIT+
BIT = '0'
| '1'Consecutive LINEs correspond to consecutive memory addresses starting at 0.
For example, a data file memory.bin containing the 9-bit unsigned numbers
7 to 13 looks like:
000000111 000001000 000001001 000001010 000001011 000001100 000001101
Such a file can be produced with memFile:
writeFile "memory.bin" (memFile Nothing [7 :: Unsigned 9 .. 13])
We can instantiate a block RAM using the contents of the file above like so:
f :: (HiddenClock dom, HiddenEnable dom) => Signal dom (Unsigned 3) -> Signal dom (Unsigned 9) f rd =unpack<$>blockRamFiled7 "memory.bin" rd (pure Nothing)
In the example above, we basically treat the block RAM as a synchronous ROM. We can see that it works as expected:
>>> import qualified Data.List as L >>> L.tail $ sampleN 4 $ f (fromList [3..5]) [10,11,12]
However, we can also interpret the same data as a tuple of a 6-bit unsigned number, and a 3-bit signed number:
g :: (HiddenClock dom, HiddenEnable dom) => Signal dom (Unsigned 3) -> Signal dom (Unsigned 6,Signed 3) g clk rd =unpack<$>blockRamFiled7 "memory.bin" rd (pure Nothing)
And then we would see:
>>> import qualified Data.List as L >>> L.tail $ sampleN 4 $ g (fromList [3..5]) [(1,2),(1,3)(1,-4)]
Synopsis
- blockRamFile :: (KnownNat m, Enum addr, NFDataX addr, HiddenClock dom, HiddenEnable dom, HasCallStack) => SNat n -> FilePath -> Signal dom addr -> Signal dom (Maybe (addr, BitVector m)) -> Signal dom (BitVector m)
- blockRamFilePow2 :: forall dom n m. (KnownNat m, KnownNat n, HiddenClock dom, HiddenEnable dom, HasCallStack) => FilePath -> Signal dom (Unsigned n) -> Signal dom (Maybe (Unsigned n, BitVector m)) -> Signal dom (BitVector m)
- memFile :: forall a f. (BitPack a, Foldable f, HasCallStack) => Maybe Bit -> f a -> String
Block RAM synchronized to an arbitrary clock
Arguments
| :: (KnownNat m, Enum addr, NFDataX addr, HiddenClock dom, HiddenEnable dom, HasCallStack) | |
| => SNat n | Size of the BRAM |
| -> FilePath | File describing the initial content of the BRAM |
| -> Signal dom addr | Read address |
| -> Signal dom (Maybe (addr, BitVector m)) | (write address |
| -> Signal dom (BitVector m) | Value of the BRAM at address |
Create a block RAM with space for n elements
- NB: Read value is delayed by 1 cycle
- NB: Initial output value is undefined, reading it will throw an
XException - NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:
| VHDL | Verilog | SystemVerilog | |
|---|---|---|---|
| Altera/Quartus | Broken | Works | Works |
| Xilinx/ISE | Works | Works | Works |
| ASIC | Untested | Untested | Untested |
See also:
- See Clash.Prelude.BlockRam for more information on how to use a block RAM.
- Use the adapter
readNewfor obtaining write-before-read semantics like this:readNew(blockRamFilesize file) rd wrM - See Clash.Prelude.BlockRam.File for more information on how to instantiate a block RAM with the contents of a data file.
- See Clash.Sized.Fixed for ideas on how to create your own data files.
Arguments
| :: forall dom n m. (KnownNat m, KnownNat n, HiddenClock dom, HiddenEnable dom, HasCallStack) | |
| => FilePath | File describing the initial content of the BRAM |
| -> Signal dom (Unsigned n) | Read address |
| -> Signal dom (Maybe (Unsigned n, BitVector m)) | (write address |
| -> Signal dom (BitVector m) | Value of the BRAM at address |
Create a block RAM with space for 2^n elements
- NB: Read value is delayed by 1 cycle
- NB: Initial output value is undefined, reading it will throw an
XException - NB: This function might not work for specific combinations of code-generation backends and hardware targets. Please check the support table below:
| VHDL | Verilog | SystemVerilog | |
|---|---|---|---|
| Altera/Quartus | Broken | Works | Works |
| Xilinx/ISE | Works | Works | Works |
| ASIC | Untested | Untested | Untested |
See also:
- See Clash.Prelude.BlockRam for more information on how to use a block RAM.
- Use the adapter
readNewfor obtaining write-before-read semantics like this:readNew(blockRamFilePow2file) rd wrM - See Clash.Prelude.BlockRam.File for more information on how to instantiate a block RAM with the contents of a data file.
- See Clash.Sized.Fixed for ideas on how to create your own data files.
Producing files
Arguments
| :: forall a f. (BitPack a, Foldable f, HasCallStack) | |
| => Maybe Bit | Value to map don't care bits to. |
| -> f a | Values to convert |
| -> String | Contents of the memory file |
Convert data to the String contents of a memory file.
- NB: Not synthesizable
The following document the several ways to instantiate components with files:
- See Clash.Sized.Fixed for more ideas on how to create your own data files.
Example
The Maybe datatype has don't care bits, where the actual value does not
matter. But the bits need a defined value in the memory. Either 0 or 1 can be
used, and both are valid representations of the data.
>>>let es = [ Nothing, Just (7 :: Unsigned 8), Just 8]>>>mapM_ (putStrLn . show . pack) es0b0_...._.... 0b1_0000_0111 0b1_0000_1000>>>putStr (memFile (Just 0) es)000000000 100000111 100001000>>>putStr (memFile (Just 1) es)011111111 100000111 100001000