brick-2.3.1: A declarative terminal user interface library
Safe HaskellSafe-Inferred
LanguageHaskell2010

Brick.Widgets.Core

Description

This module provides the core widget combinators and rendering routines. Everything this library does is in terms of these basic primitives.

Synopsis

Basic rendering primitives

class TextWidth a where Source #

The class of text types that have widths measured in terminal columns. NEVER use length etc. to measure the length of a string if you need to compute how much screen space it will occupy; always use textWidth.

Methods

textWidth :: a -> Int Source #

Instances

Instances details
TextWidth Text Source # 
Instance details

Defined in Brick.Widgets.Core

Methods

textWidth :: Text -> Int Source #

Foldable f => TextWidth (f Char) Source # 
Instance details

Defined in Brick.Widgets.Core

Methods

textWidth :: f Char -> Int Source #

emptyWidget :: Widget n Source #

The empty widget.

raw :: Image -> Widget n Source #

Build a widget directly from a raw Vty image.

txt :: Text -> Widget n Source #

Build a widget from a Text value. Breaks newlines up and space-pads short lines out to the length of the longest line.

The input string must not contain tab characters. If it does, interface corruption will result since the terminal will likely render it as taking up more than a single column. The caller should replace tabs with the appropriate number of spaces as desired. The input text should not contain escape sequences or carriage returns.

txtWrap :: Text -> Widget n Source #

Make a widget from text, but wrap the words in the input's lines at the available width using the default wrapping settings. The input text should not contain escape sequences or carriage returns.

Unlike txt, this is greedy horizontally.

txtWrapWith :: WrapSettings -> Text -> Widget n Source #

Make a widget from text, but wrap the words in the input's lines at the available width using the specified wrapping settings. The input text should not contain escape sequences or carriage returns.

Unlike txt, this is greedy horizontally.

str :: String -> Widget n Source #

Build a widget from a String. Behaves the same as txt when the input contains multiple lines.

The input string must not contain tab characters. If it does, interface corruption will result since the terminal will likely render it as taking up more than a single column. The caller should replace tabs with the appropriate number of spaces as desired. The input string should not contain escape sequences or carriage returns.

strWrap :: String -> Widget n Source #

Make a widget from a string, but wrap the words in the input's lines at the available width using the default wrapping settings. The input string should not contain escape sequences or carriage returns.

Unlike str, this is greedy horizontally.

strWrapWith :: WrapSettings -> String -> Widget n Source #

Make a widget from a string, but wrap the words in the input's lines at the available width using the specified wrapping settings. The input string should not contain escape sequences or carriage returns.

Unlike str, this is greedy horizontally.

fill :: Char -> Widget n Source #

Fill all available space with the specified character. Grows both horizontally and vertically.

hyperlink :: Text -> Widget n -> Widget n Source #

Hyperlink the given widget to the specified URL. Not all terminal emulators support this. In those that don't, this should have no discernible effect.

Padding

data Padding Source #

The type of padding.

Constructors

Pad Int

Pad by the specified number of rows or columns.

Max

Pad up to the number of available rows or columns.

padLeft :: Padding -> Widget n -> Widget n Source #

Pad the specified widget on the left. If max padding is used, this grows greedily horizontally; otherwise it defers to the padded widget.

padRight :: Padding -> Widget n -> Widget n Source #

Pad the specified widget on the right. If max padding is used, this grows greedily horizontally; otherwise it defers to the padded widget.

padTop :: Padding -> Widget n -> Widget n Source #

Pad the specified widget on the top. If max padding is used, this grows greedily vertically; otherwise it defers to the padded widget.

padBottom :: Padding -> Widget n -> Widget n Source #

Pad the specified widget on the bottom. If max padding is used, this grows greedily vertically; otherwise it defers to the padded widget.

padLeftRight :: Int -> Widget n -> Widget n Source #

Pad a widget on the left and right. Defers to the padded widget for growth policy.

padTopBottom :: Int -> Widget n -> Widget n Source #

Pad a widget on the top and bottom. Defers to the padded widget for growth policy.

padAll :: Int -> Widget n -> Widget n Source #

Pad a widget on all sides. Defers to the padded widget for growth policy.

Box layout

(<=>) Source #

Arguments

:: Widget n

Top

-> Widget n

Bottom

-> Widget n 

Vertical box layout: put the specified widgets one above the other in the specified order. Defers growth policies to the growth policies of both widgets. This operator is a binary version of vBox.

(<+>) Source #

Arguments

:: Widget n

Left

-> Widget n

Right

-> Widget n 

Horizontal box layout: put the specified widgets next to each other in the specified order. Defers growth policies to the growth policies of both widgets. This operator is a binary version of hBox.

hBox :: [Widget n] -> Widget n Source #

Horizontal box layout: put the specified widgets next to each other in the specified order (leftmost first). Defers growth policies to the growth policies of the contained widgets (if any are greedy, so is the box).

Allocates space to Fixed elements first and Greedy elements second. For example, if an hBox contains three elements A, B, and C, and if A and B are Fixed, then hBox first renders A and B. Suppose those two take up 10 columns total, and the hBox was given 50 columns. This means hBox then allocates the remaining 40 columns to C. If, on the other hand, A and B take up 50 columns together, C will not be rendered at all.

If all elements are Greedy, hBox allocates the available width evenly among the elements. So, for example, if an hBox is rendered in 90 columns and has three Greedy elements, each element will be allocated 30 columns.

vBox :: [Widget n] -> Widget n Source #

Vertical box layout: put the specified widgets one above the other in the specified order (uppermost first). Defers growth policies to the growth policies of the contained widgets (if any are greedy, so is the box).

Allocates space to Fixed elements first and Greedy elements second. For example, if a vBox contains three elements A, B, and C, and if A and B are Fixed, then vBox first renders A and B. Suppose those two take up 10 rows total, and the vBox was given 50 rows. This means vBox then allocates the remaining 40 rows to C. If, on the other hand, A and B take up 50 rows together, C will not be rendered at all.

If all elements are Greedy, vBox allocates the available height evenly among the elements. So, for example, if a vBox is rendered in 90 rows and has three Greedy elements, each element will be allocated 30 rows.

Limits

hLimit :: Int -> Widget n -> Widget n Source #

Limit the space available to the specified widget to the specified number of columns. This is important for constraining the horizontal growth of otherwise-greedy widgets. This is non-greedy horizontally and defers to the limited widget vertically.

hLimitPercent :: Int -> Widget n -> Widget n Source #

Limit the space available to the specified widget to the specified percentage of available width, as a value between 0 and 100 inclusive. Values outside the valid range will be clamped to the range endpoints. This is important for constraining the horizontal growth of otherwise-greedy widgets. This is non-greedy horizontally and defers to the limited widget vertically.

vLimit :: Int -> Widget n -> Widget n Source #

Limit the space available to the specified widget to the specified number of rows. This is important for constraining the vertical growth of otherwise-greedy widgets. This is non-greedy vertically and defers to the limited widget horizontally.

vLimitPercent :: Int -> Widget n -> Widget n Source #

Limit the space available to the specified widget to the specified percentage of available height, as a value between 0 and 100 inclusive. Values outside the valid range will be clamped to the range endpoints. This is important for constraining the vertical growth of otherwise-greedy widgets. This is non-greedy vertically and defers to the limited widget horizontally.

setAvailableSize :: (Int, Int) -> Widget n -> Widget n Source #

Set the rendering context height and width for this widget. This is useful for relaxing the rendering size constraints on e.g. layer widgets where cropping to the screen size is undesirable.

Attribute management

withDefAttr :: AttrName -> Widget n -> Widget n Source #

Update the attribute map used while rendering the specified widget (and any sub-widgets): set its new *default* attribute (i.e. the attribute components that will be applied if not overridden by any more specific attributes) to the one that we get by looking up the specified attribute name in the map.

For example:

   ...
   appAttrMap = attrMap (white on blue) [ ("highlight", fg yellow)
                                          , ("warning", bg magenta)
                                          , ("good", white on green) ]
   ...

   renderA :: (String, String) -> [Widget n]
   renderA (a,b) = hBox [ withAttr "good" (str a)
                        , str " is "
                        , withAttr "highlight" (str b) ]

   render1 = renderA ("Brick", "fun")
   render2 = withDefAttr "warning" render1

In the above, render1 will show "Brick is fun" where the first word is white on a green background, the middle word is white on a blue background, and the last word is yellow on a blue background. However, render2 will show the first word in the same colors but the middle word will be shown in whatever the terminal's normal foreground is on a magenta background, and the third word will be yellow on a magenta background.

modifyDefAttr :: (Attr -> Attr) -> Widget n -> Widget n Source #

Update the attribute map while rendering the specified widget: set the map's default attribute to the one that we get by applying the specified function to the current map's default attribute. This is a variant of withDefAttr; see the latter for more information.

withAttr :: AttrName -> Widget n -> Widget n Source #

When drawing the specified widget, set the attribute used for drawing to the one with the specified name. Note that the widget may make further changes to the active drawing attribute, so this only takes effect if nothing in the specified widget invokes withAttr or otherwise changes the rendering context's attribute setup. If you want to prevent that, use forceAttr. Attributes used this way still get merged hierarchically and still fall back to the attribute map's default attribute. If you want to change the default attribute, use withDefAttr.

For example:

   appAttrMap = attrMap (white on blue) [ ("highlight", fg yellow)
                                          , ("warning", bg magenta)
                                          ]

   renderA :: (String, String) -> [Widget n]
   renderA (a,b) = hBox [ str a
                        , str " is "
                        , withAttr "highlight" (str b)
                        ]

   render1 = renderA ("Brick", "fun")
   render2 = withAttr "warning" render1

In the example above, render1 will show Brick is fun where the first two words are white on a blue background and the last word is yellow on a blue background. However, render2 will show the first two words in white on magenta although the last word is still rendered in yellow on blue.

forceAttr :: AttrName -> Widget n -> Widget n Source #

When rendering the specified widget, force all attribute lookups in the attribute map to use the value currently assigned to the specified attribute name. This means that the attribute lookups will behave as if they all used the name specified here. That further means that the resolved attribute will still inherit from its parent entry in the attribute map as would normally be the case. If you want to have more control over the resulting attribute, consider modifyDefAttr.

For example:

   ...
   appAttrMap = attrMap (white on blue) [ ("highlight", fg yellow)
                                          , ("notice", fg red) ]
   ...

   renderA :: (String, String) -> [Widget n]
   renderA (a,b) = hBox [ withAttr "highlight" (str a)
                        , str " is "
                        , withAttr "highlight" (str b)
                        ]

   render1 = renderA (Brick, "fun")
   render2 = forceAttr "notice" render1

In the above, render1 will show "Brick is fun" where the first and last words are yellow on a blue background and the middle word is white on a blue background. However, render2 will show all words in red on a blue background. In both versions, the middle word will be in white on a blue background.

forceAttrAllowStyle :: AttrName -> Widget n -> Widget n Source #

Like forceAttr, except that the style of attribute lookups in the attribute map is preserved and merged with the forced attribute. This allows for situations where forceAttr would otherwise ignore style information that is important to preserve.

overrideAttr :: AttrName -> AttrName -> Widget n -> Widget n Source #

Override the lookup of the attribute name targetName to return the attribute value associated with fromName when rendering the specified widget.

For example:

   appAttrMap = attrMap (white on blue) [ ("highlight", fg yellow)
                                          , ("notice", fg red)
                                          ]

   renderA :: (String, String) -> [Widget n]
   renderA (a, b) = str a + str " is " + withAttr "highlight" (str b)

   render1 = withAttr "notice" $ renderA (Brick, "fun")
   render2 = overrideAttr "highlight" "notice" render1

In the example above, render1 will show Brick is fun where the first two words are red on a blue background, but fun is yellow on a blue background. However, render2 will show all three words in red on a blue background.

updateAttrMap :: (AttrMap -> AttrMap) -> Widget n -> Widget n Source #

While rendering the specified widget, use a transformed version of the current attribute map. This is a very general function with broad capabilities: you probably want a more specific function such as withDefAttr or withAttr.

Border style management

withBorderStyle :: BorderStyle -> Widget n -> Widget n Source #

When rendering the specified widget, use the specified border style for any border rendering.

joinBorders :: Widget n -> Widget n Source #

When rendering the specified widget, create borders that respond dynamically to their neighbors to form seamless connections.

separateBorders :: Widget n -> Widget n Source #

When rendering the specified widget, use static borders. This may be marginally faster, but will introduce a small gap between neighboring orthogonal borders.

This is the default for backwards compatibility.

freezeBorders :: Widget n -> Widget n Source #

After the specified widget has been rendered, freeze its borders. A frozen border will not be affected by neighbors, nor will it affect neighbors. Compared to separateBorders, freezeBorders will not affect whether borders connect internally to a widget (whereas separateBorders prevents them from connecting).

Frozen borders cannot be thawed.

Cursor placement

showCursor :: n -> Location -> Widget n -> Widget n Source #

When rendering the specified widget, also register a cursor positioning request using the specified name and location.

putCursor :: n -> Location -> Widget n -> Widget n Source #

When rendering the specified widget, also register a cursor positioning request using the specified name and location. The cursor will only be positioned but not made visible.

Naming

class Named a n where Source #

The class of types that store interface element names.

Methods

getName :: a -> n Source #

Get the name of the specified value.

Instances

Instances details
Named (FileBrowser n) n Source # 
Instance details

Defined in Brick.Widgets.FileBrowser

Methods

getName :: FileBrowser n -> n Source #

Named (Editor t n) n Source # 
Instance details

Defined in Brick.Widgets.Edit

Methods

getName :: Editor t n -> n Source #

Named (GenericList n t e) n Source # 
Instance details

Defined in Brick.Widgets.List

Methods

getName :: GenericList n t e -> n Source #

Translation and positioning

translateBy :: Location -> Widget n -> Widget n Source #

Translate the specified widget by the specified offset amount. Defers to the translated widget for growth policy.

relativeTo :: Ord n => n -> Location -> Widget n -> Widget n Source #

Given a widget, translate it to position it relative to the upper-left coordinates of a reported extent with the specified positioning offset. If the specified name has no reported extent, this just draws the specified widget with no special positioning.

This is only useful for positioning something in a higher layer relative to a reported extent in a lower layer. Any other use is likely to result in the specified widget being rendered as-is with no translation. This is because this function relies on information about lower layer renderings in order to work; using it with a resource name that wasn't rendered in a lower layer will result in this being equivalent to id.

For example, if you have two layers topLayer and bottomLayer, then a widget drawn in bottomLayer with reportExtent Foo can be used to relatively position a widget in topLayer with topLayer = relativeTo Foo ....

Cropping

cropLeftBy :: Int -> Widget n -> Widget n Source #

Crop the specified widget on the left by the specified number of columns. Defers to the cropped widget for growth policy.

cropRightBy :: Int -> Widget n -> Widget n Source #

Crop the specified widget on the right by the specified number of columns. Defers to the cropped widget for growth policy.

cropTopBy :: Int -> Widget n -> Widget n Source #

Crop the specified widget on the top by the specified number of rows. Defers to the cropped widget for growth policy.

cropBottomBy :: Int -> Widget n -> Widget n Source #

Crop the specified widget on the bottom by the specified number of rows. Defers to the cropped widget for growth policy.

cropLeftTo :: Int -> Widget n -> Widget n Source #

Crop the specified widget to the specified size from the left. Defers to the cropped widget for growth policy.

cropRightTo :: Int -> Widget n -> Widget n Source #

Crop the specified widget to the specified size from the right. Defers to the cropped widget for growth policy.

cropTopTo :: Int -> Widget n -> Widget n Source #

Crop the specified widget to the specified size from the top. Defers to the cropped widget for growth policy.

cropBottomTo :: Int -> Widget n -> Widget n Source #

Crop the specified widget to the specified size from the bottom. Defers to the cropped widget for growth policy.

Extent reporting

reportExtent :: Ord n => n -> Widget n -> Widget n Source #

Render the specified widget and record its rendering extent using the specified name (see also lookupExtent).

This function is the counterpart to makeVisible; any visibility requests made with makeVisible must have a corresponding reportExtent in order to work. The clickable function will also work for this purpose to tell the renderer about the clickable region.

clickable :: Ord n => n -> Widget n -> Widget n Source #

Request mouse click events on the specified widget.

Regions used with clickable can be scrolled into view with makeVisible.

Scrollable viewports

viewport Source #

Arguments

:: (Ord n, Show n) 
=> n

The name of the viewport (must be unique and stable for reliable behavior)

-> ViewportType

The type of viewport (indicates the permitted scrolling direction)

-> Widget n

The widget to be rendered in the scrollable viewport

-> Widget n 

Render the specified widget in a named viewport with the specified type. This permits widgets to be scrolled without being scrolling-aware. To make the most use of viewports, the specified widget should use the visible combinator to make a "visibility request". This viewport combinator will then translate the resulting rendering to make the requested region visible. In addition, the EventM monad provides primitives to scroll viewports created by this function if visible is not what you want.

This function can automatically render vertical and horizontal scroll bars if desired. To enable scroll bars, wrap your call to viewport with a call to withVScrollBars and/or withHScrollBars. If you don't like the appearance of the resulting scroll bars (defaults: verticalScrollbarRenderer and horizontalScrollbarRenderer), you can customize how they are drawn by making your own VScrollbarRenderer or HScrollbarRenderer and using withVScrollBarRenderer and/or withHScrollBarRenderer. Note that when you enable scrollbars, the content of your viewport will lose one column of available space if vertical scroll bars are enabled and one row of available space if horizontal scroll bars are enabled.

If a viewport receives more than one visibility request, then the visibility requests are merged with the inner visibility request taking preference. If a viewport receives more than one scrolling request from EventM, all are honored in the order in which they are received.

Some caution should be advised when using this function. The viewport renders its contents anew each time the viewport is drawn; in many cases this is prohibitively expensive, and viewports should not be used to display large contents for scrolling. This function is best used when the contents are not too large OR when the contents are large and render-cacheable.

Also, be aware that there is a rich API for accessing viewport information from within the EventM monad; check the docs for Brick.Main to learn more about ways to get information about viewports after they're drawn.

visible :: Widget n -> Widget n Source #

Request that the specified widget be made visible when it is rendered inside a viewport. This permits widgets (whose sizes and positions cannot be known due to being embedded in arbitrary layouts) to make a request for a parent viewport to locate them and scroll enough to put them in view. This, together with viewport, is what makes the text editor and list widgets possible without making them deal with the details of scrolling state management.

This does nothing if not rendered in a viewport.

visibleRegion :: Location -> DisplayRegion -> Widget n -> Widget n Source #

Similar to visible, request that a region (with the specified Location as its origin and DisplayRegion as its size) be made visible when it is rendered inside a viewport. The Location is relative to the specified widget's upper-left corner of (0, 0).

This does nothing if not rendered in a viewport.

unsafeLookupViewport :: Ord n => n -> RenderM n (Maybe Viewport) Source #

Given a name, obtain the viewport for that name by consulting the viewport map in the rendering monad. NOTE! Some care must be taken when calling this function, since it only returns useful values after the viewport in question has been rendered. If you call this function during rendering before a viewport has been rendered, you may get nothing or you may get a stale version of the viewport. This is because viewports are updated during rendering and the one you are interested in may not have been rendered yet. So if you want to use this, be sure you know what you are doing.

cached :: Ord n => n -> Widget n -> Widget n Source #

If the specified resource name has an entry in the rendering cache, use the rendered version from the cache. If not, render the specified widget and update the cache with the result.

To ensure that mouse events are emitted correctly for cached widgets, in addition to the rendered widget, we also cache (the names of) any clickable extents that were rendered and restore that when utilizing the cache.

See also invalidateCacheEntry.

Viewport scroll bars

withVScrollBars :: VScrollBarOrientation -> Widget n -> Widget n Source #

Enable vertical scroll bars on all viewports in the specified widget and draw them with the specified orientation.

withHScrollBars :: HScrollBarOrientation -> Widget n -> Widget n Source #

Enable horizontal scroll bars on all viewports in the specified widget and draw them with the specified orientation.

withClickableHScrollBars :: (ClickableScrollbarElement -> n -> n) -> Widget n -> Widget n Source #

Enable mouse click reporting on horizontal scroll bars in the specified widget. This must be used with withHScrollBars. The provided function is used to build a resource name containing the scroll bar element clicked and the viewport name associated with the scroll bar. It is usually a data constructor of the n type.

withClickableVScrollBars :: (ClickableScrollbarElement -> n -> n) -> Widget n -> Widget n Source #

Enable mouse click reporting on vertical scroll bars in the specified widget. This must be used with withVScrollBars. The provided function is used to build a resource name containing the scroll bar element clicked and the viewport name associated with the scroll bar. It is usually a data constructor of the n type.

withVScrollBarHandles :: Widget n -> Widget n Source #

Enable scroll bar handles on all vertical scroll bars in the specified widget. Handles appear at the ends of the scroll bar, representing the "handles" that are typically clickable in graphical UIs to move the scroll bar incrementally. Vertical scroll bars are also clickable if mouse mode is enabled and if withClickableVScrollBars is used.

This will only have an effect if withVScrollBars is also called.

withHScrollBarHandles :: Widget n -> Widget n Source #

Enable scroll bar handles on all horizontal scroll bars in the specified widget. Handles appear at the ends of the scroll bar, representing the "handles" that are typically clickable in graphical UIs to move the scroll bar incrementally. Horizontal scroll bars are also clickable if mouse mode is enabled and if withClickableHScrollBars is used.

This will only have an effect if withHScrollBars is also called.

withVScrollBarRenderer :: VScrollbarRenderer n -> Widget n -> Widget n Source #

Render vertical viewport scroll bars in the specified widget with the specified renderer. This is only needed if you want to override the use of the default renderer, verticalScrollbarRenderer.

withHScrollBarRenderer :: HScrollbarRenderer n -> Widget n -> Widget n Source #

Render horizontal viewport scroll bars in the specified widget with the specified renderer. This is only needed if you want to override the use of the default renderer, horizontalScrollbarRenderer.

data VScrollbarRenderer n Source #

A vertical scroll bar renderer.

Constructors

VScrollbarRenderer 

Fields

  • renderVScrollbar :: Widget n

    How to render the body of the scroll bar. This should provide a widget that expands in whatever direction(s) this renderer will be used for. So, for example, this widget would need to be one that expands vertically such as fill. The same goes for the trough widget.

  • renderVScrollbarTrough :: Widget n

    How to render the "trough" of the scroll bar (the area to either side of the scroll bar body). This should expand as described in the documentation for the scroll bar field.

  • renderVScrollbarHandleBefore :: Widget n

    How to render the handle that appears at the top or left of the scrollbar. The result will be allowed to be at most one row high.

  • renderVScrollbarHandleAfter :: Widget n

    How to render the handle that appears at the bottom or right of the scrollbar. The result will be allowed to be at most one row high.

  • scrollbarWidthAllocation :: Int

    The number of columns that will be allocated to the scroll bar. This determines how much space the widgets of the scroll bar elements can take up. If they use less than this amount, padding will be applied between the scroll bar and the viewport contents.

data HScrollbarRenderer n Source #

A horizontal scroll bar renderer.

Constructors

HScrollbarRenderer 

Fields

  • renderHScrollbar :: Widget n

    How to render the body of the scroll bar. This should provide a widget that expands in whatever direction(s) this renderer will be used for. So, for example, this widget would need to be one that expands horizontally such as fill. The same goes for the trough widget.

  • renderHScrollbarTrough :: Widget n

    How to render the "trough" of the scroll bar (the area to either side of the scroll bar body). This should expand as described in the documentation for the scroll bar field.

  • renderHScrollbarHandleBefore :: Widget n

    How to render the handle that appears at the top or left of the scrollbar. The result will be allowed to be at most one column wide.

  • renderHScrollbarHandleAfter :: Widget n

    How to render the handle that appears at the bottom or right of the scrollbar. The result will be allowed to be at most one column wide.

  • scrollbarHeightAllocation :: Int

    The number of rows that will be allocated to the scroll bar. This determines how much space the widgets of the scroll bar elements can take up. If they use less than this amount, padding will be applied between the scroll bar and the viewport contents.

verticalScrollbarRenderer :: VScrollbarRenderer n Source #

The default renderer for vertical viewport scroll bars. Override with withVScrollBarRenderer.

horizontalScrollbarRenderer :: HScrollbarRenderer n Source #

The default renderer for horizontal viewport scroll bars. Override with withHScrollBarRenderer.

scrollbarAttr :: AttrName Source #

The base attribute for scroll bars.

scrollbarTroughAttr :: AttrName Source #

The attribute for scroll bar troughs. This attribute is a specialization of scrollbarAttr.

scrollbarHandleAttr :: AttrName Source #

The attribute for scroll bar handles. This attribute is a specialization of scrollbarAttr.

verticalScrollbar Source #

Arguments

:: Ord n 
=> VScrollbarRenderer n

The renderer to use.

-> VScrollBarOrientation

The scroll bar orientation. The orientation governs how additional padding is added to the scroll bar if it is smaller than it space allocation according to scrollbarWidthAllocation.

-> n

The viewport name associated with this scroll bar.

-> Maybe (ClickableScrollbarElement -> n -> n)

Constructor for clickable scroll bar element names.

-> Bool

Whether to display handles.

-> Int

The total viewport height in effect.

-> Int

The viewport vertical scrolling offset in effect.

-> Int

The total viewport content height.

-> Widget n 

Build a vertical scroll bar using the specified renderer and settings.

You probably don't want to use this directly; instead, use viewport, withVScrollBars, and, if needed, withVScrollBarRenderer. This is exposed so that if you want to render a scroll bar of your own, you can do so outside the viewport context.

horizontalScrollbar Source #

Arguments

:: Ord n 
=> HScrollbarRenderer n

The renderer to use.

-> HScrollBarOrientation

The scroll bar orientation. The orientation governs how additional padding is added to the scroll bar if it is smaller than it space allocation according to scrollbarHeightAllocation.

-> n

The viewport name associated with this scroll bar.

-> Maybe (ClickableScrollbarElement -> n -> n)

Constructor for clickable scroll bar element names. Will be given the element name and the viewport name.

-> Bool

Whether to show handles.

-> Int

The total viewport width in effect.

-> Int

The viewport horizontal scrolling offset in effect.

-> Int

The total viewport content width.

-> Widget n 

Build a horizontal scroll bar using the specified renderer and settings.

You probably don't want to use this directly; instead, use viewport, withHScrollBars, and, if needed, withHScrollBarRenderer. This is exposed so that if you want to render a scroll bar of your own, you can do so outside the viewport context.

Adding offsets to cursor positions and visibility requests

addResultOffset :: Location -> Result n -> Result n Source #

Add an offset to all cursor locations, visibility requests, and extents in the specified rendering result. This function is critical for maintaining correctness in the rendering results as they are processed successively by box layouts and other wrapping combinators, since calls to this function result in converting from widget-local coordinates to (ultimately) terminal-global ones so they can be used by other combinators. You should call this any time you render something and then translate it or otherwise offset it from its original origin.

Cropping results

cropToContext :: Widget n -> Widget n Source #

After rendering the specified widget, crop its result image to the dimensions in the rendering context.