amazonka-waf-regional-2.0: Amazon WAF Regional SDK.
Copyright(c) 2013-2023 Brendan Hay
LicenseMozilla Public License, v. 2.0.
MaintainerBrendan Hay
Stabilityauto-generated
Portabilitynon-portable (GHC extensions)
Safe HaskellSafe-Inferred
LanguageHaskell2010

Amazonka.WAFRegional.CreateRateBasedRule

Description

This is AWS WAF Classic documentation. For more information, see AWS WAF Classic in the developer guide.

For the latest version of AWS WAF, use the AWS WAFV2 API and see the AWS WAF Developer Guide. With the latest version, AWS WAF has a single set of endpoints for regional and global use.

Creates a RateBasedRule. The RateBasedRule contains a RateLimit, which specifies the maximum number of requests that AWS WAF allows from a specified IP address in a five-minute period. The RateBasedRule also contains the IPSet objects, ByteMatchSet objects, and other predicates that identify the requests that you want to count or block if these requests exceed the RateLimit.

If you add more than one predicate to a RateBasedRule, a request not only must exceed the RateLimit, but it also must match all the conditions to be counted or blocked. For example, suppose you add the following to a RateBasedRule:

  • An IPSet that matches the IP address 192.0.2.44/32
  • A ByteMatchSet that matches BadBot in the User-Agent header

Further, you specify a RateLimit of 1,000.

You then add the RateBasedRule to a WebACL and specify that you want to block requests that meet the conditions in the rule. For a request to be blocked, it must come from the IP address 192.0.2.44 and the User-Agent header in the request must contain the value BadBot. Further, requests that match these two conditions must be received at a rate of more than 1,000 requests every five minutes. If both conditions are met and the rate is exceeded, AWS WAF blocks the requests. If the rate drops below 1,000 for a five-minute period, AWS WAF no longer blocks the requests.

As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a RateBasedRule:

  • A ByteMatchSet with FieldToMatch of URI
  • A PositionalConstraint of STARTS_WITH
  • A TargetString of login

Further, you specify a RateLimit of 1,000.

By adding this RateBasedRule to a WebACL, you could limit requests to your login page without affecting the rest of your site.

To create and configure a RateBasedRule, perform the following steps:

  1. Create and update the predicates that you want to include in the rule. For more information, see CreateByteMatchSet, CreateIPSet, and CreateSqlInjectionMatchSet.
  2. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of a CreateRule request.
  3. Submit a CreateRateBasedRule request.
  4. Use GetChangeToken to get the change token that you provide in the ChangeToken parameter of an UpdateRule request.
  5. Submit an UpdateRateBasedRule request to specify the predicates that you want to include in the rule.
  6. Create and update a WebACL that contains the RateBasedRule. For more information, see CreateWebACL.

For more information about how to use the AWS WAF API to allow or block HTTP requests, see the AWS WAF Developer Guide.

Synopsis

Creating a Request

data CreateRateBasedRule Source #

See: newCreateRateBasedRule smart constructor.

Constructors

CreateRateBasedRule' 

Fields

  • tags :: Maybe (NonEmpty Tag)
     
  • name :: Text

    A friendly name or description of the RateBasedRule. You can't change the name of a RateBasedRule after you create it.

  • metricName :: Text

    A friendly name or description for the metrics for this RateBasedRule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RateBasedRule.

  • rateKey :: RateKey

    The field that AWS WAF uses to determine if requests are likely arriving from a single source and thus subject to rate monitoring. The only valid value for RateKey is IP. IP indicates that requests that arrive from the same IP address are subject to the RateLimit that is specified in the RateBasedRule.

  • rateLimit :: Natural

    The maximum number of requests, which have an identical value in the field that is specified by RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.

  • changeToken :: Text

    The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

Instances

Instances details
ToJSON CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

ToHeaders CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

ToPath CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

ToQuery CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

AWSRequest CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Associated Types

type AWSResponse CreateRateBasedRule #

Generic CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Associated Types

type Rep CreateRateBasedRule :: Type -> Type #

Read CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Show CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

NFData CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Methods

rnf :: CreateRateBasedRule -> () #

Eq CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Hashable CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

type AWSResponse CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

type Rep CreateRateBasedRule Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

type Rep CreateRateBasedRule = D1 ('MetaData "CreateRateBasedRule" "Amazonka.WAFRegional.CreateRateBasedRule" "amazonka-waf-regional-2.0-83dY3vKOuQzAAW7M6EmzRI" 'False) (C1 ('MetaCons "CreateRateBasedRule'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "tags") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe (NonEmpty Tag))) :*: (S1 ('MetaSel ('Just "name") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text) :*: S1 ('MetaSel ('Just "metricName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text))) :*: (S1 ('MetaSel ('Just "rateKey") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 RateKey) :*: (S1 ('MetaSel ('Just "rateLimit") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Natural) :*: S1 ('MetaSel ('Just "changeToken") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text)))))

newCreateRateBasedRule Source #

Create a value of CreateRateBasedRule with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:tags:CreateRateBasedRule', createRateBasedRule_tags -

CreateRateBasedRule, createRateBasedRule_name - A friendly name or description of the RateBasedRule. You can't change the name of a RateBasedRule after you create it.

CreateRateBasedRule, createRateBasedRule_metricName - A friendly name or description for the metrics for this RateBasedRule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RateBasedRule.

CreateRateBasedRule, createRateBasedRule_rateKey - The field that AWS WAF uses to determine if requests are likely arriving from a single source and thus subject to rate monitoring. The only valid value for RateKey is IP. IP indicates that requests that arrive from the same IP address are subject to the RateLimit that is specified in the RateBasedRule.

CreateRateBasedRule, createRateBasedRule_rateLimit - The maximum number of requests, which have an identical value in the field that is specified by RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.

CreateRateBasedRule, createRateBasedRule_changeToken - The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

Request Lenses

createRateBasedRule_name :: Lens' CreateRateBasedRule Text Source #

A friendly name or description of the RateBasedRule. You can't change the name of a RateBasedRule after you create it.

createRateBasedRule_metricName :: Lens' CreateRateBasedRule Text Source #

A friendly name or description for the metrics for this RateBasedRule. The name can contain only alphanumeric characters (A-Z, a-z, 0-9), with maximum length 128 and minimum length one. It can't contain whitespace or metric names reserved for AWS WAF, including "All" and "Default_Action." You can't change the name of the metric after you create the RateBasedRule.

createRateBasedRule_rateKey :: Lens' CreateRateBasedRule RateKey Source #

The field that AWS WAF uses to determine if requests are likely arriving from a single source and thus subject to rate monitoring. The only valid value for RateKey is IP. IP indicates that requests that arrive from the same IP address are subject to the RateLimit that is specified in the RateBasedRule.

createRateBasedRule_rateLimit :: Lens' CreateRateBasedRule Natural Source #

The maximum number of requests, which have an identical value in the field that is specified by RateKey, allowed in a five-minute period. If the number of requests exceeds the RateLimit and the other predicates specified in the rule are also met, AWS WAF triggers the action that is specified for this rule.

createRateBasedRule_changeToken :: Lens' CreateRateBasedRule Text Source #

The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

Destructuring the Response

data CreateRateBasedRuleResponse Source #

See: newCreateRateBasedRuleResponse smart constructor.

Constructors

CreateRateBasedRuleResponse' 

Fields

  • changeToken :: Maybe Text

    The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

  • rule :: Maybe RateBasedRule

    The RateBasedRule that is returned in the CreateRateBasedRule response.

  • httpStatus :: Int

    The response's http status code.

Instances

Instances details
Generic CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Associated Types

type Rep CreateRateBasedRuleResponse :: Type -> Type #

Read CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Show CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

NFData CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

Eq CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

type Rep CreateRateBasedRuleResponse Source # 
Instance details

Defined in Amazonka.WAFRegional.CreateRateBasedRule

type Rep CreateRateBasedRuleResponse = D1 ('MetaData "CreateRateBasedRuleResponse" "Amazonka.WAFRegional.CreateRateBasedRule" "amazonka-waf-regional-2.0-83dY3vKOuQzAAW7M6EmzRI" 'False) (C1 ('MetaCons "CreateRateBasedRuleResponse'" 'PrefixI 'True) (S1 ('MetaSel ('Just "changeToken") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "rule") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe RateBasedRule)) :*: S1 ('MetaSel ('Just "httpStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Int))))

newCreateRateBasedRuleResponse Source #

Create a value of CreateRateBasedRuleResponse with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

CreateRateBasedRule, createRateBasedRuleResponse_changeToken - The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

$sel:rule:CreateRateBasedRuleResponse', createRateBasedRuleResponse_rule - The RateBasedRule that is returned in the CreateRateBasedRule response.

$sel:httpStatus:CreateRateBasedRuleResponse', createRateBasedRuleResponse_httpStatus - The response's http status code.

Response Lenses

createRateBasedRuleResponse_changeToken :: Lens' CreateRateBasedRuleResponse (Maybe Text) Source #

The ChangeToken that you used to submit the CreateRateBasedRule request. You can also use this value to query the status of the request. For more information, see GetChangeTokenStatus.

createRateBasedRuleResponse_rule :: Lens' CreateRateBasedRuleResponse (Maybe RateBasedRule) Source #

The RateBasedRule that is returned in the CreateRateBasedRule response.