| Copyright | (c) 2013-2023 Brendan Hay |
|---|---|
| License | Mozilla Public License, v. 2.0. |
| Maintainer | Brendan Hay |
| Stability | auto-generated |
| Portability | non-portable (GHC extensions) |
| Safe Haskell | Safe-Inferred |
| Language | Haskell2010 |
Amazonka.S3.UploadPart
Description
Uploads a part in a multipart upload.
In this operation, you provide part data in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.
You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier, that you must include in your upload part request.
Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.
For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.
To ensure that data is not corrupted when traversing the network,
specify the Content-MD5 header in the upload part request. Amazon S3
checks the part data against the provided MD5 value. If they do not
match, Amazon S3 returns an error.
If the upload request is signed with Signature Version 4, then Amazon
Web Services S3 uses the x-amz-content-sha256 header as a checksum
instead of Content-MD5. For more information see
Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).
Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.
For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .
For information on the permissions required to use the multipart upload API, go to Multipart Upload and Permissions in the Amazon S3 User Guide.
You can optionally request server-side encryption where Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it for you when you access it. You have the option of providing your own encryption key, or you can use the Amazon Web Services managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in the request must match the headers you used in the request to initiate the upload by using CreateMultipartUpload. For more information, go to Using Server-Side Encryption in the Amazon S3 User Guide.
Server-side encryption is supported by the S3 Multipart Upload actions. Unless you are using a customer-provided encryption key, you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.
If you requested server-side encryption using a customer-provided encryption key in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.
- x-amz-server-side-encryption-customer-algorithm
- x-amz-server-side-encryption-customer-key
- x-amz-server-side-encryption-customer-key-MD5
Special Errors
- Code: NoSuchUpload
- /Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed./
- HTTP Status Code: 404 Not Found
- SOAP Fault Code Prefix: Client
Related Resources
Synopsis
- data UploadPart = UploadPart' {
- checksumAlgorithm :: Maybe ChecksumAlgorithm
- checksumCRC32 :: Maybe Text
- checksumCRC32C :: Maybe Text
- checksumSHA1 :: Maybe Text
- checksumSHA256 :: Maybe Text
- contentLength :: Maybe Integer
- contentMD5 :: Maybe Text
- expectedBucketOwner :: Maybe Text
- requestPayer :: Maybe RequestPayer
- sSECustomerAlgorithm :: Maybe Text
- sSECustomerKey :: Maybe (Sensitive Text)
- sSECustomerKeyMD5 :: Maybe Text
- bucket :: BucketName
- key :: ObjectKey
- partNumber :: Int
- uploadId :: Text
- body :: RequestBody
- newUploadPart :: BucketName -> ObjectKey -> Int -> Text -> RequestBody -> UploadPart
- uploadPart_checksumAlgorithm :: Lens' UploadPart (Maybe ChecksumAlgorithm)
- uploadPart_checksumCRC32 :: Lens' UploadPart (Maybe Text)
- uploadPart_checksumCRC32C :: Lens' UploadPart (Maybe Text)
- uploadPart_checksumSHA1 :: Lens' UploadPart (Maybe Text)
- uploadPart_checksumSHA256 :: Lens' UploadPart (Maybe Text)
- uploadPart_contentLength :: Lens' UploadPart (Maybe Integer)
- uploadPart_contentMD5 :: Lens' UploadPart (Maybe Text)
- uploadPart_expectedBucketOwner :: Lens' UploadPart (Maybe Text)
- uploadPart_requestPayer :: Lens' UploadPart (Maybe RequestPayer)
- uploadPart_sSECustomerAlgorithm :: Lens' UploadPart (Maybe Text)
- uploadPart_sSECustomerKey :: Lens' UploadPart (Maybe Text)
- uploadPart_sSECustomerKeyMD5 :: Lens' UploadPart (Maybe Text)
- uploadPart_bucket :: Lens' UploadPart BucketName
- uploadPart_key :: Lens' UploadPart ObjectKey
- uploadPart_partNumber :: Lens' UploadPart Int
- uploadPart_uploadId :: Lens' UploadPart Text
- uploadPart_body :: Lens' UploadPart RequestBody
- data UploadPartResponse = UploadPartResponse' {
- bucketKeyEnabled :: Maybe Bool
- checksumCRC32 :: Maybe Text
- checksumCRC32C :: Maybe Text
- checksumSHA1 :: Maybe Text
- checksumSHA256 :: Maybe Text
- eTag :: Maybe ETag
- requestCharged :: Maybe RequestCharged
- sSECustomerAlgorithm :: Maybe Text
- sSECustomerKeyMD5 :: Maybe Text
- sSEKMSKeyId :: Maybe (Sensitive Text)
- serverSideEncryption :: Maybe ServerSideEncryption
- httpStatus :: Int
- newUploadPartResponse :: Int -> UploadPartResponse
- uploadPartResponse_bucketKeyEnabled :: Lens' UploadPartResponse (Maybe Bool)
- uploadPartResponse_checksumCRC32 :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_checksumCRC32C :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_checksumSHA1 :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_checksumSHA256 :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_eTag :: Lens' UploadPartResponse (Maybe ETag)
- uploadPartResponse_requestCharged :: Lens' UploadPartResponse (Maybe RequestCharged)
- uploadPartResponse_sSECustomerAlgorithm :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_sSECustomerKeyMD5 :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_sSEKMSKeyId :: Lens' UploadPartResponse (Maybe Text)
- uploadPartResponse_serverSideEncryption :: Lens' UploadPartResponse (Maybe ServerSideEncryption)
- uploadPartResponse_httpStatus :: Lens' UploadPartResponse Int
Creating a Request
data UploadPart Source #
See: newUploadPart smart constructor.
Constructors
| UploadPart' | |
Fields
| |
Instances
Arguments
| :: BucketName | |
| -> ObjectKey | |
| -> Int | |
| -> Text | |
| -> RequestBody | |
| -> UploadPart |
Create a value of UploadPart with all optional fields omitted.
Use generic-lens or optics to modify other optional fields.
The following record fields are available, with the corresponding lenses provided for backwards compatibility:
UploadPart, uploadPart_checksumAlgorithm - Indicates the algorithm used to create the checksum for the object when
using the SDK. This header will not provide any additional functionality
if not using the SDK. When sending this header, there must be a
corresponding x-amz-checksum or x-amz-trailer header sent.
Otherwise, Amazon S3 fails the request with the HTTP status code
400 Bad Request. For more information, see
Checking object integrity
in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided
ChecksumAlgorithm parameter.
This checksum algorithm must be the same for all parts and it match the
checksum value supplied in the CreateMultipartUpload request.
UploadPart, uploadPart_checksumCRC32 - This header can be used as a data integrity check to verify that the
data received is the same data that was originally sent. This header
specifies the base64-encoded, 32-bit CRC32 checksum of the object. For
more information, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPart_checksumCRC32C - This header can be used as a data integrity check to verify that the
data received is the same data that was originally sent. This header
specifies the base64-encoded, 32-bit CRC32C checksum of the object. For
more information, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPart_checksumSHA1 - This header can be used as a data integrity check to verify that the
data received is the same data that was originally sent. This header
specifies the base64-encoded, 160-bit SHA-1 digest of the object. For
more information, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPart_checksumSHA256 - This header can be used as a data integrity check to verify that the
data received is the same data that was originally sent. This header
specifies the base64-encoded, 256-bit SHA-256 digest of the object. For
more information, see
Checking object integrity
in the Amazon S3 User Guide.
$sel:contentLength:UploadPart', uploadPart_contentLength - Size of the body in bytes. This parameter is useful when the size of the
body cannot be determined automatically.
$sel:contentMD5:UploadPart', uploadPart_contentMD5 - The base64-encoded 128-bit MD5 digest of the part data. This parameter
is auto-populated when using the command from the CLI. This parameter is
required if object lock parameters are specified.
$sel:expectedBucketOwner:UploadPart', uploadPart_expectedBucketOwner - The account ID of the expected bucket owner. If the bucket is owned by a
different account, the request fails with the HTTP status code
403 Forbidden (access denied).
$sel:requestPayer:UploadPart', uploadPart_requestPayer - Undocumented member.
UploadPart, uploadPart_sSECustomerAlgorithm - Specifies the algorithm to use to when encrypting the object (for
example, AES256).
$sel:sSECustomerKey:UploadPart', uploadPart_sSECustomerKey - Specifies the customer-provided encryption key for Amazon S3 to use in
encrypting data. This value is used to store the object and then it is
discarded; Amazon S3 does not store the encryption key. The key must be
appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header. This must be
the same encryption key specified in the initiate multipart upload
request.
UploadPart, uploadPart_sSECustomerKeyMD5 - Specifies the 128-bit MD5 digest of the encryption key according to RFC
1321. Amazon S3 uses this header for a message integrity check to ensure
that the encryption key was transmitted without error.
UploadPart, uploadPart_bucket - The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct
requests to the S3 on Outposts hostname. The S3 on Outposts hostname
takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com.
When using this action with S3 on Outposts through the Amazon Web
Services SDKs, you provide the Outposts bucket ARN in place of the
bucket name. For more information about S3 on Outposts ARNs, see
Using Amazon S3 on Outposts
in the Amazon S3 User Guide.
UploadPart, uploadPart_key - Object key for which the multipart upload was initiated.
UploadPart, uploadPart_partNumber - Part number of part being uploaded. This is a positive integer between 1
and 10,000.
UploadPart, uploadPart_uploadId - Upload ID identifying the multipart upload whose part is being uploaded.
$sel:body:UploadPart', uploadPart_body - Object data.
Request Lenses
uploadPart_checksumAlgorithm :: Lens' UploadPart (Maybe ChecksumAlgorithm) Source #
Indicates the algorithm used to create the checksum for the object when
using the SDK. This header will not provide any additional functionality
if not using the SDK. When sending this header, there must be a
corresponding x-amz-checksum or x-amz-trailer header sent.
Otherwise, Amazon S3 fails the request with the HTTP status code
400 Bad Request. For more information, see
Checking object integrity
in the Amazon S3 User Guide.
If you provide an individual checksum, Amazon S3 ignores any provided
ChecksumAlgorithm parameter.
This checksum algorithm must be the same for all parts and it match the
checksum value supplied in the CreateMultipartUpload request.
uploadPart_checksumCRC32 :: Lens' UploadPart (Maybe Text) Source #
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
uploadPart_checksumCRC32C :: Lens' UploadPart (Maybe Text) Source #
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
uploadPart_checksumSHA1 :: Lens' UploadPart (Maybe Text) Source #
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
uploadPart_checksumSHA256 :: Lens' UploadPart (Maybe Text) Source #
This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.
uploadPart_contentLength :: Lens' UploadPart (Maybe Integer) Source #
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.
uploadPart_contentMD5 :: Lens' UploadPart (Maybe Text) Source #
The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.
uploadPart_expectedBucketOwner :: Lens' UploadPart (Maybe Text) Source #
The account ID of the expected bucket owner. If the bucket is owned by a
different account, the request fails with the HTTP status code
403 Forbidden (access denied).
uploadPart_requestPayer :: Lens' UploadPart (Maybe RequestPayer) Source #
Undocumented member.
uploadPart_sSECustomerAlgorithm :: Lens' UploadPart (Maybe Text) Source #
Specifies the algorithm to use to when encrypting the object (for example, AES256).
uploadPart_sSECustomerKey :: Lens' UploadPart (Maybe Text) Source #
Specifies the customer-provided encryption key for Amazon S3 to use in
encrypting data. This value is used to store the object and then it is
discarded; Amazon S3 does not store the encryption key. The key must be
appropriate for use with the algorithm specified in the
x-amz-server-side-encryption-customer-algorithm header. This must be
the same encryption key specified in the initiate multipart upload
request.
uploadPart_sSECustomerKeyMD5 :: Lens' UploadPart (Maybe Text) Source #
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
uploadPart_bucket :: Lens' UploadPart BucketName Source #
The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct
requests to the S3 on Outposts hostname. The S3 on Outposts hostname
takes the form
AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com.
When using this action with S3 on Outposts through the Amazon Web
Services SDKs, you provide the Outposts bucket ARN in place of the
bucket name. For more information about S3 on Outposts ARNs, see
Using Amazon S3 on Outposts
in the Amazon S3 User Guide.
uploadPart_key :: Lens' UploadPart ObjectKey Source #
Object key for which the multipart upload was initiated.
uploadPart_partNumber :: Lens' UploadPart Int Source #
Part number of part being uploaded. This is a positive integer between 1 and 10,000.
uploadPart_uploadId :: Lens' UploadPart Text Source #
Upload ID identifying the multipart upload whose part is being uploaded.
uploadPart_body :: Lens' UploadPart RequestBody Source #
Object data.
Destructuring the Response
data UploadPartResponse Source #
See: newUploadPartResponse smart constructor.
Constructors
| UploadPartResponse' | |
Fields
| |
Instances
newUploadPartResponse Source #
Arguments
| :: Int | |
| -> UploadPartResponse |
Create a value of UploadPartResponse with all optional fields omitted.
Use generic-lens or optics to modify other optional fields.
The following record fields are available, with the corresponding lenses provided for backwards compatibility:
UploadPartResponse, uploadPartResponse_bucketKeyEnabled - Indicates whether the multipart upload uses an S3 Bucket Key for
server-side encryption with Amazon Web Services KMS (SSE-KMS).
UploadPart, uploadPartResponse_checksumCRC32 - The base64-encoded, 32-bit CRC32 checksum of the object. This will only
be present if it was uploaded with the object. With multipart uploads,
this may not be a checksum value of the object. For more information
about how checksums are calculated with multipart uploads, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPartResponse_checksumCRC32C - The base64-encoded, 32-bit CRC32C checksum of the object. This will only
be present if it was uploaded with the object. With multipart uploads,
this may not be a checksum value of the object. For more information
about how checksums are calculated with multipart uploads, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPartResponse_checksumSHA1 - The base64-encoded, 160-bit SHA-1 digest of the object. This will only
be present if it was uploaded with the object. With multipart uploads,
this may not be a checksum value of the object. For more information
about how checksums are calculated with multipart uploads, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPart, uploadPartResponse_checksumSHA256 - The base64-encoded, 256-bit SHA-256 digest of the object. This will only
be present if it was uploaded with the object. With multipart uploads,
this may not be a checksum value of the object. For more information
about how checksums are calculated with multipart uploads, see
Checking object integrity
in the Amazon S3 User Guide.
UploadPartResponse, uploadPartResponse_eTag - Entity tag for the uploaded object.
$sel:requestCharged:UploadPartResponse', uploadPartResponse_requestCharged - Undocumented member.
UploadPart, uploadPartResponse_sSECustomerAlgorithm - If server-side encryption with a customer-provided encryption key was
requested, the response will include this header confirming the
encryption algorithm used.
UploadPart, uploadPartResponse_sSECustomerKeyMD5 - If server-side encryption with a customer-provided encryption key was
requested, the response will include this header to provide round-trip
message integrity verification of the customer-provided encryption key.
$sel:sSEKMSKeyId:UploadPartResponse', uploadPartResponse_sSEKMSKeyId - If present, specifies the ID of the Amazon Web Services Key Management
Service (Amazon Web Services KMS) symmetric customer managed key was
used for the object.
$sel:serverSideEncryption:UploadPartResponse', uploadPartResponse_serverSideEncryption - The server-side encryption algorithm used when storing this object in
Amazon S3 (for example, AES256, aws:kms).
$sel:httpStatus:UploadPartResponse', uploadPartResponse_httpStatus - The response's http status code.
Response Lenses
uploadPartResponse_bucketKeyEnabled :: Lens' UploadPartResponse (Maybe Bool) Source #
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
uploadPartResponse_checksumCRC32 :: Lens' UploadPartResponse (Maybe Text) Source #
The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
uploadPartResponse_checksumCRC32C :: Lens' UploadPartResponse (Maybe Text) Source #
The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
uploadPartResponse_checksumSHA1 :: Lens' UploadPartResponse (Maybe Text) Source #
The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
uploadPartResponse_checksumSHA256 :: Lens' UploadPartResponse (Maybe Text) Source #
The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.
uploadPartResponse_eTag :: Lens' UploadPartResponse (Maybe ETag) Source #
Entity tag for the uploaded object.
uploadPartResponse_requestCharged :: Lens' UploadPartResponse (Maybe RequestCharged) Source #
Undocumented member.
uploadPartResponse_sSECustomerAlgorithm :: Lens' UploadPartResponse (Maybe Text) Source #
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
uploadPartResponse_sSECustomerKeyMD5 :: Lens' UploadPartResponse (Maybe Text) Source #
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
uploadPartResponse_sSEKMSKeyId :: Lens' UploadPartResponse (Maybe Text) Source #
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key was used for the object.
uploadPartResponse_serverSideEncryption :: Lens' UploadPartResponse (Maybe ServerSideEncryption) Source #
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
uploadPartResponse_httpStatus :: Lens' UploadPartResponse Int Source #
The response's http status code.