amazonka-kms-2.0: Amazon Key Management Service SDK.
Copyright(c) 2013-2023 Brendan Hay
LicenseMozilla Public License, v. 2.0.
MaintainerBrendan Hay
Stabilityauto-generated
Portabilitynon-portable (GHC extensions)
Safe HaskellSafe-Inferred
LanguageHaskell2010

Amazonka.KMS.ReEncrypt

Description

Decrypts ciphertext and then reencrypts it entirely within KMS. You can use this operation to change the KMS key under which data is encrypted, such as when you manually rotate a KMS key or change the KMS key that protects a ciphertext. You can also use it to reencrypt ciphertext under the same KMS key, such as to change the encryption context of a ciphertext.

The ReEncrypt operation can decrypt ciphertext that was encrypted by using a KMS key in an KMS operation, such as Encrypt or GenerateDataKey. It can also decrypt ciphertext that was encrypted by using the public key of an asymmetric KMS key outside of KMS. However, it cannot decrypt ciphertext produced by other libraries, such as the Amazon Web Services Encryption SDK or Amazon S3 client-side encryption. These libraries return a ciphertext format that is incompatible with KMS.

When you use the ReEncrypt operation, you need to provide information for the decrypt operation and the subsequent encrypt operation.

  • If your ciphertext was encrypted under an asymmetric KMS key, you must use the SourceKeyId parameter to identify the KMS key that encrypted the ciphertext. You must also supply the encryption algorithm that was used. This information is required to decrypt the data.
  • If your ciphertext was encrypted under a symmetric encryption KMS key, the SourceKeyId parameter is optional. KMS can get this information from metadata that it adds to the symmetric ciphertext blob. This feature adds durability to your implementation by ensuring that authorized users can decrypt ciphertext decades after it was encrypted, even if they've lost track of the key ID. However, specifying the source KMS key is always recommended as a best practice. When you use the SourceKeyId parameter to specify a KMS key, KMS uses only the KMS key you specify. If the ciphertext was encrypted under a different KMS key, the ReEncrypt operation fails. This practice ensures that you use the KMS key that you intend.
  • To reencrypt the data, you must use the DestinationKeyId parameter to specify the KMS key that re-encrypts the data after it is decrypted. If the destination KMS key is an asymmetric KMS key, you must also provide the encryption algorithm. The algorithm that you choose must be compatible with the KMS key.

    When you use an asymmetric KMS key to encrypt or reencrypt data, be sure to record the KMS key and encryption algorithm that you choose. You will be required to provide the same KMS key and encryption algorithm when you decrypt the data. If the KMS key and algorithm do not match the values used to encrypt the data, the decrypt operation fails.

    You are not required to supply the key ID and encryption algorithm when you decrypt with symmetric encryption KMS keys because KMS stores this information in the ciphertext blob. KMS cannot store metadata in ciphertext generated with asymmetric keys. The standard format for asymmetric key ciphertext does not include configurable fields.

The KMS key that you use for this operation must be in a compatible key state. For details, see Key states of KMS keys in the Key Management Service Developer Guide.

Cross-account use: Yes. The source KMS key and destination KMS key can be in different Amazon Web Services accounts. Either or both KMS keys can be in a different account than the caller. To specify a KMS key in a different account, you must use its key ARN or alias ARN.

Required permissions:

To permit reencryption from or to a KMS key, include the "kms:ReEncrypt*" permission in your key policy. This permission is automatically included in the key policy when you use the console to create a KMS key. But you must include it manually when you create a KMS key programmatically or when you use the PutKeyPolicy operation to set a key policy.

Related operations:

  • Decrypt
  • Encrypt
  • GenerateDataKey
  • GenerateDataKeyPair
Synopsis

Creating a Request

data ReEncrypt Source #

See: newReEncrypt smart constructor.

Constructors

ReEncrypt' 

Fields

  • destinationEncryptionAlgorithm :: Maybe EncryptionAlgorithmSpec

    Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

    This parameter is required only when the destination KMS key is an asymmetric KMS key.

  • destinationEncryptionContext :: Maybe (HashMap Text Text)

    Specifies that encryption context to use when the reencrypting the data.

    A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

    An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

    For more information, see Encryption context in the Key Management Service Developer Guide.

  • grantTokens :: Maybe [Text]

    A list of grant tokens.

    Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

  • sourceEncryptionAlgorithm :: Maybe EncryptionAlgorithmSpec

    Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

    Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

    This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

  • sourceEncryptionContext :: Maybe (HashMap Text Text)

    Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

    An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

    For more information, see Encryption context in the Key Management Service Developer Guide.

  • sourceKeyId :: Maybe Text

    Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

    Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

    This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

    To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

    For example:

    • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
    • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
    • Alias name: alias/ExampleAlias
    • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

    To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

  • ciphertextBlob :: Base64

    Ciphertext of the data to reencrypt.

  • destinationKeyId :: Text

    A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

    To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

    For example:

    • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
    • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
    • Alias name: alias/ExampleAlias
    • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

    To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

Instances

Instances details
ToJSON ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

ToHeaders ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Methods

toHeaders :: ReEncrypt -> [Header] #

ToPath ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

ToQuery ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

AWSRequest ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Associated Types

type AWSResponse ReEncrypt #

Generic ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Associated Types

type Rep ReEncrypt :: Type -> Type #

Read ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Show ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

NFData ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Methods

rnf :: ReEncrypt -> () #

Eq ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Hashable ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

type AWSResponse ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

type Rep ReEncrypt Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

type Rep ReEncrypt = D1 ('MetaData "ReEncrypt" "Amazonka.KMS.ReEncrypt" "amazonka-kms-2.0-6YhT3Ymbf9Z5PoaGoz7tbG" 'False) (C1 ('MetaCons "ReEncrypt'" 'PrefixI 'True) (((S1 ('MetaSel ('Just "destinationEncryptionAlgorithm") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe EncryptionAlgorithmSpec)) :*: S1 ('MetaSel ('Just "destinationEncryptionContext") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe (HashMap Text Text)))) :*: (S1 ('MetaSel ('Just "grantTokens") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "sourceEncryptionAlgorithm") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe EncryptionAlgorithmSpec)))) :*: ((S1 ('MetaSel ('Just "sourceEncryptionContext") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe (HashMap Text Text))) :*: S1 ('MetaSel ('Just "sourceKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "ciphertextBlob") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Base64) :*: S1 ('MetaSel ('Just "destinationKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text)))))

newReEncrypt Source #

Create a value of ReEncrypt with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

ReEncrypt, reEncrypt_destinationEncryptionAlgorithm - Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

This parameter is required only when the destination KMS key is an asymmetric KMS key.

$sel:destinationEncryptionContext:ReEncrypt', reEncrypt_destinationEncryptionContext - Specifies that encryption context to use when the reencrypting the data.

A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

$sel:grantTokens:ReEncrypt', reEncrypt_grantTokens - A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

ReEncrypt, reEncrypt_sourceEncryptionAlgorithm - Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

$sel:sourceEncryptionContext:ReEncrypt', reEncrypt_sourceEncryptionContext - Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

ReEncrypt, reEncrypt_sourceKeyId - Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
  • Alias name: alias/ExampleAlias
  • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

ReEncrypt, reEncrypt_ciphertextBlob - Ciphertext of the data to reencrypt.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

$sel:destinationKeyId:ReEncrypt', reEncrypt_destinationKeyId - A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
  • Alias name: alias/ExampleAlias
  • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

Request Lenses

reEncrypt_destinationEncryptionAlgorithm :: Lens' ReEncrypt (Maybe EncryptionAlgorithmSpec) Source #

Specifies the encryption algorithm that KMS will use to reecrypt the data after it has decrypted it. The default value, SYMMETRIC_DEFAULT, represents the encryption algorithm used for symmetric encryption KMS keys.

This parameter is required only when the destination KMS key is an asymmetric KMS key.

reEncrypt_destinationEncryptionContext :: Lens' ReEncrypt (Maybe (HashMap Text Text)) Source #

Specifies that encryption context to use when the reencrypting the data.

A destination encryption context is valid only when the destination KMS key is a symmetric encryption KMS key. The standard ciphertext format for asymmetric KMS keys does not include fields for metadata.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

reEncrypt_grantTokens :: Lens' ReEncrypt (Maybe [Text]) Source #

A list of grant tokens.

Use a grant token when your permission to call this operation comes from a new grant that has not yet achieved eventual consistency. For more information, see Grant token and Using a grant token in the Key Management Service Developer Guide.

reEncrypt_sourceEncryptionAlgorithm :: Lens' ReEncrypt (Maybe EncryptionAlgorithmSpec) Source #

Specifies the encryption algorithm that KMS will use to decrypt the ciphertext before it is reencrypted. The default value, SYMMETRIC_DEFAULT, represents the algorithm used for symmetric encryption KMS keys.

Specify the same algorithm that was used to encrypt the ciphertext. If you specify a different algorithm, the decrypt attempt fails.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key.

reEncrypt_sourceEncryptionContext :: Lens' ReEncrypt (Maybe (HashMap Text Text)) Source #

Specifies the encryption context to use to decrypt the ciphertext. Enter the same encryption context that was used to encrypt the ciphertext.

An encryption context is a collection of non-secret key-value pairs that represent additional authenticated data. When you use an encryption context to encrypt data, you must specify the same (an exact case-sensitive match) encryption context to decrypt the data. An encryption context is supported only on operations with symmetric encryption KMS keys. On operations with symmetric encryption KMS keys, an encryption context is optional, but it is strongly recommended.

For more information, see Encryption context in the Key Management Service Developer Guide.

reEncrypt_sourceKeyId :: Lens' ReEncrypt (Maybe Text) Source #

Specifies the KMS key that KMS will use to decrypt the ciphertext before it is re-encrypted.

Enter a key ID of the KMS key that was used to encrypt the ciphertext. If you identify a different KMS key, the ReEncrypt operation throws an IncorrectKeyException.

This parameter is required only when the ciphertext was encrypted under an asymmetric KMS key. If you used a symmetric encryption KMS key, KMS can get the KMS key from metadata that it adds to the symmetric ciphertext blob. However, it is always recommended as a best practice. This practice ensures that you use the KMS key that you intend.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
  • Alias name: alias/ExampleAlias
  • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

reEncrypt_ciphertextBlob :: Lens' ReEncrypt ByteString Source #

Ciphertext of the data to reencrypt.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

reEncrypt_destinationKeyId :: Lens' ReEncrypt Text Source #

A unique identifier for the KMS key that is used to reencrypt the data. Specify a symmetric encryption KMS key or an asymmetric KMS key with a KeyUsage value of ENCRYPT_DECRYPT. To find the KeyUsage value of a KMS key, use the DescribeKey operation.

To specify a KMS key, use its key ID, key ARN, alias name, or alias ARN. When using an alias name, prefix it with "alias/". To specify a KMS key in a different Amazon Web Services account, you must use the key ARN or alias ARN.

For example:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab
  • Key ARN: arn:aws:kms:us-east-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab
  • Alias name: alias/ExampleAlias
  • Alias ARN: arn:aws:kms:us-east-2:111122223333:alias/ExampleAlias

To get the key ID and key ARN for a KMS key, use ListKeys or DescribeKey. To get the alias name and alias ARN, use ListAliases.

Destructuring the Response

data ReEncryptResponse Source #

See: newReEncryptResponse smart constructor.

Constructors

ReEncryptResponse' 

Fields

Instances

Instances details
Generic ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Associated Types

type Rep ReEncryptResponse :: Type -> Type #

Read ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Show ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

NFData ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

Methods

rnf :: ReEncryptResponse -> () #

Eq ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

type Rep ReEncryptResponse Source # 
Instance details

Defined in Amazonka.KMS.ReEncrypt

type Rep ReEncryptResponse = D1 ('MetaData "ReEncryptResponse" "Amazonka.KMS.ReEncrypt" "amazonka-kms-2.0-6YhT3Ymbf9Z5PoaGoz7tbG" 'False) (C1 ('MetaCons "ReEncryptResponse'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "ciphertextBlob") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Base64)) :*: (S1 ('MetaSel ('Just "destinationEncryptionAlgorithm") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe EncryptionAlgorithmSpec)) :*: S1 ('MetaSel ('Just "keyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "sourceEncryptionAlgorithm") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe EncryptionAlgorithmSpec)) :*: (S1 ('MetaSel ('Just "sourceKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "httpStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Int)))))

newReEncryptResponse Source #

Create a value of ReEncryptResponse with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

ReEncrypt, reEncryptResponse_ciphertextBlob - The reencrypted data. When you use the HTTP API or the Amazon Web Services CLI, the value is Base64-encoded. Otherwise, it is not Base64-encoded.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

ReEncrypt, reEncryptResponse_destinationEncryptionAlgorithm - The encryption algorithm that was used to reencrypt the data.

ReEncryptResponse, reEncryptResponse_keyId - The Amazon Resource Name (key ARN) of the KMS key that was used to reencrypt the data.

ReEncrypt, reEncryptResponse_sourceEncryptionAlgorithm - The encryption algorithm that was used to decrypt the ciphertext before it was reencrypted.

ReEncrypt, reEncryptResponse_sourceKeyId - Unique identifier of the KMS key used to originally encrypt the data.

$sel:httpStatus:ReEncryptResponse', reEncryptResponse_httpStatus - The response's http status code.

Response Lenses

reEncryptResponse_ciphertextBlob :: Lens' ReEncryptResponse (Maybe ByteString) Source #

The reencrypted data. When you use the HTTP API or the Amazon Web Services CLI, the value is Base64-encoded. Otherwise, it is not Base64-encoded.-- -- Note: This Lens automatically encodes and decodes Base64 data. -- The underlying isomorphism will encode to Base64 representation during -- serialisation, and decode from Base64 representation during deserialisation. -- This Lens accepts and returns only raw unencoded data.

reEncryptResponse_destinationEncryptionAlgorithm :: Lens' ReEncryptResponse (Maybe EncryptionAlgorithmSpec) Source #

The encryption algorithm that was used to reencrypt the data.

reEncryptResponse_keyId :: Lens' ReEncryptResponse (Maybe Text) Source #

The Amazon Resource Name (key ARN) of the KMS key that was used to reencrypt the data.

reEncryptResponse_sourceEncryptionAlgorithm :: Lens' ReEncryptResponse (Maybe EncryptionAlgorithmSpec) Source #

The encryption algorithm that was used to decrypt the ciphertext before it was reencrypted.

reEncryptResponse_sourceKeyId :: Lens' ReEncryptResponse (Maybe Text) Source #

Unique identifier of the KMS key used to originally encrypt the data.

reEncryptResponse_httpStatus :: Lens' ReEncryptResponse Int Source #

The response's http status code.