amazonka-docdb-2.0: Amazon DocumentDB with MongoDB compatibility SDK.
Copyright(c) 2013-2023 Brendan Hay
LicenseMozilla Public License, v. 2.0.
MaintainerBrendan Hay
Stabilityauto-generated
Portabilitynon-portable (GHC extensions)
Safe HaskellSafe-Inferred
LanguageHaskell2010

Amazonka.DocumentDB.Types

Description

 
Synopsis

Service Configuration

defaultService :: Service Source #

API version 2014-10-31 of the Amazon DocumentDB with MongoDB compatibility SDK configuration.

Errors

_AuthorizationNotFoundFault :: AsError a => Fold a ServiceError Source #

The specified CIDR IP or Amazon EC2 security group isn't authorized for the specified security group.

Amazon DocumentDB also might not be authorized to perform necessary actions on your behalf using IAM.

_CertificateNotFoundFault :: AsError a => Fold a ServiceError Source #

CertificateIdentifier doesn't refer to an existing certificate.

_DBClusterAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

You already have a cluster with the given identifier.

_DBClusterNotFoundFault :: AsError a => Fold a ServiceError Source #

DBClusterIdentifier doesn't refer to an existing cluster.

_DBClusterParameterGroupNotFoundFault :: AsError a => Fold a ServiceError Source #

DBClusterParameterGroupName doesn't refer to an existing cluster parameter group.

_DBClusterQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The cluster can't be created because you have reached the maximum allowed quota of clusters.

_DBClusterSnapshotAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

You already have a cluster snapshot with the given identifier.

_DBClusterSnapshotNotFoundFault :: AsError a => Fold a ServiceError Source #

DBClusterSnapshotIdentifier doesn't refer to an existing cluster snapshot.

_DBInstanceAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

You already have a instance with the given identifier.

_DBInstanceNotFoundFault :: AsError a => Fold a ServiceError Source #

DBInstanceIdentifier doesn't refer to an existing instance.

_DBParameterGroupAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

A parameter group with the same name already exists.

_DBParameterGroupNotFoundFault :: AsError a => Fold a ServiceError Source #

DBParameterGroupName doesn't refer to an existing parameter group.

_DBParameterGroupQuotaExceededFault :: AsError a => Fold a ServiceError Source #

This request would cause you to exceed the allowed number of parameter groups.

_DBSecurityGroupNotFoundFault :: AsError a => Fold a ServiceError Source #

DBSecurityGroupName doesn't refer to an existing security group.

_DBSnapshotAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

DBSnapshotIdentifier is already being used by an existing snapshot.

_DBSnapshotNotFoundFault :: AsError a => Fold a ServiceError Source #

DBSnapshotIdentifier doesn't refer to an existing snapshot.

_DBSubnetGroupAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

DBSubnetGroupName is already being used by an existing subnet group.

_DBSubnetGroupDoesNotCoverEnoughAZs :: AsError a => Fold a ServiceError Source #

Subnets in the subnet group should cover at least two Availability Zones unless there is only one Availability Zone.

_DBSubnetGroupNotFoundFault :: AsError a => Fold a ServiceError Source #

DBSubnetGroupName doesn't refer to an existing subnet group.

_DBSubnetGroupQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The request would cause you to exceed the allowed number of subnet groups.

_DBSubnetQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The request would cause you to exceed the allowed number of subnets in a subnet group.

_DBUpgradeDependencyFailureFault :: AsError a => Fold a ServiceError Source #

The upgrade failed because a resource that the depends on can't be modified.

_EventSubscriptionQuotaExceededFault :: AsError a => Fold a ServiceError Source #

You have reached the maximum number of event subscriptions.

_GlobalClusterAlreadyExistsFault :: AsError a => Fold a ServiceError Source #

The GlobalClusterIdentifier already exists. Choose a new global cluster identifier (unique name) to create a new global cluster.

_GlobalClusterNotFoundFault :: AsError a => Fold a ServiceError Source #

The GlobalClusterIdentifier doesn't refer to an existing global cluster.

_GlobalClusterQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The number of global clusters for this account is already at the maximum allowed.

_InstanceQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The request would cause you to exceed the allowed number of instances.

_InsufficientDBClusterCapacityFault :: AsError a => Fold a ServiceError Source #

The cluster doesn't have enough capacity for the current operation.

_InsufficientDBInstanceCapacityFault :: AsError a => Fold a ServiceError Source #

The specified instance class isn't available in the specified Availability Zone.

_InsufficientStorageClusterCapacityFault :: AsError a => Fold a ServiceError Source #

There is not enough storage available for the current action. You might be able to resolve this error by updating your subnet group to use different Availability Zones that have more storage available.

_InvalidDBClusterSnapshotStateFault :: AsError a => Fold a ServiceError Source #

The provided value isn't a valid cluster snapshot state.

_InvalidDBClusterStateFault :: AsError a => Fold a ServiceError Source #

The cluster isn't in a valid state.

_InvalidDBInstanceStateFault :: AsError a => Fold a ServiceError Source #

The specified instance isn't in the available state.

_InvalidDBParameterGroupStateFault :: AsError a => Fold a ServiceError Source #

The parameter group is in use, or it is in a state that is not valid. If you are trying to delete the parameter group, you can't delete it when the parameter group is in this state.

_InvalidDBSecurityGroupStateFault :: AsError a => Fold a ServiceError Source #

The state of the security group doesn't allow deletion.

_InvalidDBSnapshotStateFault :: AsError a => Fold a ServiceError Source #

The state of the snapshot doesn't allow deletion.

_InvalidDBSubnetGroupStateFault :: AsError a => Fold a ServiceError Source #

The subnet group can't be deleted because it's in use.

_InvalidDBSubnetStateFault :: AsError a => Fold a ServiceError Source #

The subnet isn't in the available state.

_InvalidEventSubscriptionStateFault :: AsError a => Fold a ServiceError Source #

Someone else might be modifying a subscription. Wait a few seconds, and try again.

_InvalidGlobalClusterStateFault :: AsError a => Fold a ServiceError Source #

The requested operation can't be performed while the cluster is in this state.

_InvalidRestoreFault :: AsError a => Fold a ServiceError Source #

You cannot restore from a virtual private cloud (VPC) backup to a non-VPC DB instance.

_InvalidSubnet :: AsError a => Fold a ServiceError Source #

The requested subnet is not valid, or multiple subnets were requested that are not all in a common virtual private cloud (VPC).

_InvalidVPCNetworkStateFault :: AsError a => Fold a ServiceError Source #

The subnet group doesn't cover all Availability Zones after it is created because of changes that were made.

_KMSKeyNotAccessibleFault :: AsError a => Fold a ServiceError Source #

An error occurred when accessing an KMS key.

_ResourceNotFoundFault :: AsError a => Fold a ServiceError Source #

The specified resource ID was not found.

_SNSInvalidTopicFault :: AsError a => Fold a ServiceError Source #

Amazon SNS has responded that there is a problem with the specified topic.

_SNSNoAuthorizationFault :: AsError a => Fold a ServiceError Source #

You do not have permission to publish to the SNS topic Amazon Resource Name (ARN).

_SNSTopicArnNotFoundFault :: AsError a => Fold a ServiceError Source #

The SNS topic Amazon Resource Name (ARN) does not exist.

_SharedSnapshotQuotaExceededFault :: AsError a => Fold a ServiceError Source #

You have exceeded the maximum number of accounts that you can share a manual DB snapshot with.

_SnapshotQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The request would cause you to exceed the allowed number of snapshots.

_SourceNotFoundFault :: AsError a => Fold a ServiceError Source #

The requested source could not be found.

_StorageQuotaExceededFault :: AsError a => Fold a ServiceError Source #

The request would cause you to exceed the allowed amount of storage available across all instances.

_StorageTypeNotSupportedFault :: AsError a => Fold a ServiceError Source #

Storage of the specified StorageType can't be associated with the DB instance.

_SubnetAlreadyInUse :: AsError a => Fold a ServiceError Source #

The subnet is already in use in the Availability Zone.

_SubscriptionAlreadyExistFault :: AsError a => Fold a ServiceError Source #

The provided subscription name already exists.

_SubscriptionCategoryNotFoundFault :: AsError a => Fold a ServiceError Source #

The provided category does not exist.

_SubscriptionNotFoundFault :: AsError a => Fold a ServiceError Source #

The subscription name does not exist.

ApplyMethod

newtype ApplyMethod Source #

Constructors

ApplyMethod' 

Instances

Instances details
FromJSON ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

FromJSONKey ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToJSON ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToJSONKey ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToByteString ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToHeader ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToLog ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToQuery ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

FromText ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToText ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Methods

toText :: ApplyMethod -> Text #

FromXML ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

ToXML ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Methods

toXML :: ApplyMethod -> XML #

Generic ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Associated Types

type Rep ApplyMethod :: Type -> Type #

Read ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Show ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

NFData ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Methods

rnf :: ApplyMethod -> () #

Eq ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Ord ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

Hashable ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

type Rep ApplyMethod Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ApplyMethod

type Rep ApplyMethod = D1 ('MetaData "ApplyMethod" "Amazonka.DocumentDB.Types.ApplyMethod" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'True) (C1 ('MetaCons "ApplyMethod'" 'PrefixI 'True) (S1 ('MetaSel ('Just "fromApplyMethod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 Text)))

SourceType

newtype SourceType Source #

Constructors

SourceType' 

Fields

Instances

Instances details
FromJSON SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

FromJSONKey SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToJSON SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToJSONKey SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToByteString SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToHeader SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToLog SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToQuery SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

FromText SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToText SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Methods

toText :: SourceType -> Text #

FromXML SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

ToXML SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Methods

toXML :: SourceType -> XML #

Generic SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Associated Types

type Rep SourceType :: Type -> Type #

Read SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Show SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

NFData SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Methods

rnf :: SourceType -> () #

Eq SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Ord SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

Hashable SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

type Rep SourceType Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.SourceType

type Rep SourceType = D1 ('MetaData "SourceType" "Amazonka.DocumentDB.Types.SourceType" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'True) (C1 ('MetaCons "SourceType'" 'PrefixI 'True) (S1 ('MetaSel ('Just "fromSourceType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedLazy) (Rec0 Text)))

AvailabilityZone

data AvailabilityZone Source #

Information about an Availability Zone.

See: newAvailabilityZone smart constructor.

Constructors

AvailabilityZone' 

Fields

Instances

Instances details
FromXML AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

Generic AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

Associated Types

type Rep AvailabilityZone :: Type -> Type #

Read AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

Show AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

NFData AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

Methods

rnf :: AvailabilityZone -> () #

Eq AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

Hashable AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

type Rep AvailabilityZone Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.AvailabilityZone

type Rep AvailabilityZone = D1 ('MetaData "AvailabilityZone" "Amazonka.DocumentDB.Types.AvailabilityZone" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "AvailabilityZone'" 'PrefixI 'True) (S1 ('MetaSel ('Just "name") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newAvailabilityZone :: AvailabilityZone Source #

Create a value of AvailabilityZone with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:name:AvailabilityZone', availabilityZone_name - The name of the Availability Zone.

availabilityZone_name :: Lens' AvailabilityZone (Maybe Text) Source #

The name of the Availability Zone.

Certificate

data Certificate Source #

A certificate authority (CA) certificate for an Amazon Web Services account.

See: newCertificate smart constructor.

Constructors

Certificate' 

Fields

Instances

Instances details
FromXML Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

Generic Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

Associated Types

type Rep Certificate :: Type -> Type #

Read Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

Show Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

NFData Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

Methods

rnf :: Certificate -> () #

Eq Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

Hashable Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

type Rep Certificate Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Certificate

type Rep Certificate = D1 ('MetaData "Certificate" "Amazonka.DocumentDB.Types.Certificate" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "Certificate'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "certificateArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "certificateIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "certificateType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "thumbprint") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "validFrom") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "validTill") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601))))))

newCertificate :: Certificate Source #

Create a value of Certificate with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:certificateArn:Certificate', certificate_certificateArn - The Amazon Resource Name (ARN) for the certificate.

Example: arn:aws:rds:us-east-1::cert:rds-ca-2019

$sel:certificateIdentifier:Certificate', certificate_certificateIdentifier - The unique key that identifies a certificate.

Example: rds-ca-2019

$sel:certificateType:Certificate', certificate_certificateType - The type of the certificate.

Example: CA

$sel:thumbprint:Certificate', certificate_thumbprint - The thumbprint of the certificate.

$sel:validFrom:Certificate', certificate_validFrom - The starting date-time from which the certificate is valid.

Example: 2019-07-31T17:57:09Z

$sel:validTill:Certificate', certificate_validTill - The date-time after which the certificate is no longer valid.

Example: 2024-07-31T17:57:09Z

certificate_certificateArn :: Lens' Certificate (Maybe Text) Source #

The Amazon Resource Name (ARN) for the certificate.

Example: arn:aws:rds:us-east-1::cert:rds-ca-2019

certificate_certificateIdentifier :: Lens' Certificate (Maybe Text) Source #

The unique key that identifies a certificate.

Example: rds-ca-2019

certificate_certificateType :: Lens' Certificate (Maybe Text) Source #

The type of the certificate.

Example: CA

certificate_thumbprint :: Lens' Certificate (Maybe Text) Source #

The thumbprint of the certificate.

certificate_validFrom :: Lens' Certificate (Maybe UTCTime) Source #

The starting date-time from which the certificate is valid.

Example: 2019-07-31T17:57:09Z

certificate_validTill :: Lens' Certificate (Maybe UTCTime) Source #

The date-time after which the certificate is no longer valid.

Example: 2024-07-31T17:57:09Z

CloudwatchLogsExportConfiguration

data CloudwatchLogsExportConfiguration Source #

The configuration setting for the log types to be enabled for export to Amazon CloudWatch Logs for a specific instance or cluster.

The EnableLogTypes and DisableLogTypes arrays determine which logs are exported (or not exported) to CloudWatch Logs. The values within these arrays depend on the engine that is being used.

See: newCloudwatchLogsExportConfiguration smart constructor.

Constructors

CloudwatchLogsExportConfiguration' 

Fields

Instances

Instances details
ToQuery CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

Generic CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

Associated Types

type Rep CloudwatchLogsExportConfiguration :: Type -> Type #

Read CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

Show CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

NFData CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

Eq CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

Hashable CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

type Rep CloudwatchLogsExportConfiguration Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration

type Rep CloudwatchLogsExportConfiguration = D1 ('MetaData "CloudwatchLogsExportConfiguration" "Amazonka.DocumentDB.Types.CloudwatchLogsExportConfiguration" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "CloudwatchLogsExportConfiguration'" 'PrefixI 'True) (S1 ('MetaSel ('Just "disableLogTypes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "enableLogTypes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))))

newCloudwatchLogsExportConfiguration :: CloudwatchLogsExportConfiguration Source #

Create a value of CloudwatchLogsExportConfiguration with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:disableLogTypes:CloudwatchLogsExportConfiguration', cloudwatchLogsExportConfiguration_disableLogTypes - The list of log types to disable.

$sel:enableLogTypes:CloudwatchLogsExportConfiguration', cloudwatchLogsExportConfiguration_enableLogTypes - The list of log types to enable.

DBCluster

data DBCluster Source #

Detailed information about a cluster.

See: newDBCluster smart constructor.

Constructors

DBCluster' 

Fields

  • associatedRoles :: Maybe [DBClusterRole]

    Provides a list of the Identity and Access Management (IAM) roles that are associated with the cluster. (IAM) roles that are associated with a cluster grant permission for the cluster to access other Amazon Web Services services on your behalf.

  • availabilityZones :: Maybe [Text]

    Provides the list of Amazon EC2 Availability Zones that instances in the cluster can be created in.

  • backupRetentionPeriod :: Maybe Int

    Specifies the number of days for which automatic snapshots are retained.

  • cloneGroupId :: Maybe Text

    Identifies the clone group to which the DB cluster is associated.

  • clusterCreateTime :: Maybe ISO8601

    Specifies the time when the cluster was created, in Universal Coordinated Time (UTC).

  • dbClusterArn :: Maybe Text

    The Amazon Resource Name (ARN) for the cluster.

  • dbClusterIdentifier :: Maybe Text

    Contains a user-supplied cluster identifier. This identifier is the unique key that identifies a cluster.

  • dbClusterMembers :: Maybe [DBClusterMember]

    Provides the list of instances that make up the cluster.

  • dbClusterParameterGroup :: Maybe Text

    Specifies the name of the cluster parameter group for the cluster.

  • dbSubnetGroup :: Maybe Text

    Specifies information on the subnet group that is associated with the cluster, including the name, description, and subnets in the subnet group.

  • dbClusterResourceId :: Maybe Text

    The Amazon Web Services Region-unique, immutable identifier for the cluster. This identifier is found in CloudTrail log entries whenever the KMS key for the cluster is accessed.

  • deletionProtection :: Maybe Bool

    Specifies whether this cluster can be deleted. If DeletionProtection is enabled, the cluster cannot be deleted unless it is modified and DeletionProtection is disabled. DeletionProtection protects clusters from being accidentally deleted.

  • earliestRestorableTime :: Maybe ISO8601

    The earliest time to which a database can be restored with point-in-time restore.

  • enabledCloudwatchLogsExports :: Maybe [Text]

    A list of log types that this cluster is configured to export to Amazon CloudWatch Logs.

  • endpoint :: Maybe Text

    Specifies the connection endpoint for the primary instance of the cluster.

  • engine :: Maybe Text

    Provides the name of the database engine to be used for this cluster.

  • engineVersion :: Maybe Text

    Indicates the database engine version.

  • hostedZoneId :: Maybe Text

    Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.

  • kmsKeyId :: Maybe Text

    If StorageEncrypted is true, the KMS key identifier for the encrypted cluster.

  • latestRestorableTime :: Maybe ISO8601

    Specifies the latest time to which a database can be restored with point-in-time restore.

  • masterUsername :: Maybe Text

    Contains the master user name for the cluster.

  • multiAZ :: Maybe Bool

    Specifies whether the cluster has instances in multiple Availability Zones.

  • percentProgress :: Maybe Text

    Specifies the progress of the operation as a percentage.

  • port :: Maybe Int

    Specifies the port that the database engine is listening on.

  • preferredBackupWindow :: Maybe Text

    Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.

  • preferredMaintenanceWindow :: Maybe Text

    Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

  • readReplicaIdentifiers :: Maybe [Text]

    Contains one or more identifiers of the secondary clusters that are associated with this cluster.

  • readerEndpoint :: Maybe Text

    The reader endpoint for the cluster. The reader endpoint for a cluster load balances connections across the Amazon DocumentDB replicas that are available in a cluster. As clients request new connections to the reader endpoint, Amazon DocumentDB distributes the connection requests among the Amazon DocumentDB replicas in the cluster. This functionality can help balance your read workload across multiple Amazon DocumentDB replicas in your cluster.

    If a failover occurs, and the Amazon DocumentDB replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Amazon DocumentDB replicas in the cluster, you can then reconnect to the reader endpoint.

  • replicationSourceIdentifier :: Maybe Text

    Contains the identifier of the source cluster if this cluster is a secondary cluster.

  • status :: Maybe Text

    Specifies the current state of this cluster.

  • storageEncrypted :: Maybe Bool

    Specifies whether the cluster is encrypted.

  • vpcSecurityGroups :: Maybe [VpcSecurityGroupMembership]

    Provides a list of virtual private cloud (VPC) security groups that the cluster belongs to.

Instances

Instances details
FromXML DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

Generic DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

Associated Types

type Rep DBCluster :: Type -> Type #

Read DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

Show DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

NFData DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

Methods

rnf :: DBCluster -> () #

Eq DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

Hashable DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

type Rep DBCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBCluster

type Rep DBCluster = D1 ('MetaData "DBCluster" "Amazonka.DocumentDB.Types.DBCluster" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBCluster'" 'PrefixI 'True) (((((S1 ('MetaSel ('Just "associatedRoles") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [DBClusterRole])) :*: S1 ('MetaSel ('Just "availabilityZones") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))) :*: (S1 ('MetaSel ('Just "backupRetentionPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "cloneGroupId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "clusterCreateTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "dbClusterArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "dbClusterIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbClusterMembers") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [DBClusterMember]))))) :*: (((S1 ('MetaSel ('Just "dbClusterParameterGroup") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbSubnetGroup") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "dbClusterResourceId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "deletionProtection") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)))) :*: ((S1 ('MetaSel ('Just "earliestRestorableTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "enabledCloudwatchLogsExports") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))) :*: (S1 ('MetaSel ('Just "endpoint") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))) :*: ((((S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "hostedZoneId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "kmsKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "latestRestorableTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)))) :*: ((S1 ('MetaSel ('Just "masterUsername") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "multiAZ") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "percentProgress") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "port") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))))) :*: (((S1 ('MetaSel ('Just "preferredBackupWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "preferredMaintenanceWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "readReplicaIdentifiers") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "readerEndpoint") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "replicationSourceIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "storageEncrypted") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "vpcSecurityGroups") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [VpcSecurityGroupMembership]))))))))

newDBCluster :: DBCluster Source #

Create a value of DBCluster with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:associatedRoles:DBCluster', dbCluster_associatedRoles - Provides a list of the Identity and Access Management (IAM) roles that are associated with the cluster. (IAM) roles that are associated with a cluster grant permission for the cluster to access other Amazon Web Services services on your behalf.

$sel:availabilityZones:DBCluster', dbCluster_availabilityZones - Provides the list of Amazon EC2 Availability Zones that instances in the cluster can be created in.

$sel:backupRetentionPeriod:DBCluster', dbCluster_backupRetentionPeriod - Specifies the number of days for which automatic snapshots are retained.

$sel:cloneGroupId:DBCluster', dbCluster_cloneGroupId - Identifies the clone group to which the DB cluster is associated.

$sel:clusterCreateTime:DBCluster', dbCluster_clusterCreateTime - Specifies the time when the cluster was created, in Universal Coordinated Time (UTC).

$sel:dbClusterArn:DBCluster', dbCluster_dbClusterArn - The Amazon Resource Name (ARN) for the cluster.

$sel:dbClusterIdentifier:DBCluster', dbCluster_dbClusterIdentifier - Contains a user-supplied cluster identifier. This identifier is the unique key that identifies a cluster.

$sel:dbClusterMembers:DBCluster', dbCluster_dbClusterMembers - Provides the list of instances that make up the cluster.

$sel:dbClusterParameterGroup:DBCluster', dbCluster_dbClusterParameterGroup - Specifies the name of the cluster parameter group for the cluster.

$sel:dbSubnetGroup:DBCluster', dbCluster_dbSubnetGroup - Specifies information on the subnet group that is associated with the cluster, including the name, description, and subnets in the subnet group.

$sel:dbClusterResourceId:DBCluster', dbCluster_dbClusterResourceId - The Amazon Web Services Region-unique, immutable identifier for the cluster. This identifier is found in CloudTrail log entries whenever the KMS key for the cluster is accessed.

$sel:deletionProtection:DBCluster', dbCluster_deletionProtection - Specifies whether this cluster can be deleted. If DeletionProtection is enabled, the cluster cannot be deleted unless it is modified and DeletionProtection is disabled. DeletionProtection protects clusters from being accidentally deleted.

$sel:earliestRestorableTime:DBCluster', dbCluster_earliestRestorableTime - The earliest time to which a database can be restored with point-in-time restore.

$sel:enabledCloudwatchLogsExports:DBCluster', dbCluster_enabledCloudwatchLogsExports - A list of log types that this cluster is configured to export to Amazon CloudWatch Logs.

$sel:endpoint:DBCluster', dbCluster_endpoint - Specifies the connection endpoint for the primary instance of the cluster.

$sel:engine:DBCluster', dbCluster_engine - Provides the name of the database engine to be used for this cluster.

$sel:engineVersion:DBCluster', dbCluster_engineVersion - Indicates the database engine version.

$sel:hostedZoneId:DBCluster', dbCluster_hostedZoneId - Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.

$sel:kmsKeyId:DBCluster', dbCluster_kmsKeyId - If StorageEncrypted is true, the KMS key identifier for the encrypted cluster.

$sel:latestRestorableTime:DBCluster', dbCluster_latestRestorableTime - Specifies the latest time to which a database can be restored with point-in-time restore.

$sel:masterUsername:DBCluster', dbCluster_masterUsername - Contains the master user name for the cluster.

$sel:multiAZ:DBCluster', dbCluster_multiAZ - Specifies whether the cluster has instances in multiple Availability Zones.

$sel:percentProgress:DBCluster', dbCluster_percentProgress - Specifies the progress of the operation as a percentage.

$sel:port:DBCluster', dbCluster_port - Specifies the port that the database engine is listening on.

$sel:preferredBackupWindow:DBCluster', dbCluster_preferredBackupWindow - Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.

$sel:preferredMaintenanceWindow:DBCluster', dbCluster_preferredMaintenanceWindow - Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

$sel:readReplicaIdentifiers:DBCluster', dbCluster_readReplicaIdentifiers - Contains one or more identifiers of the secondary clusters that are associated with this cluster.

$sel:readerEndpoint:DBCluster', dbCluster_readerEndpoint - The reader endpoint for the cluster. The reader endpoint for a cluster load balances connections across the Amazon DocumentDB replicas that are available in a cluster. As clients request new connections to the reader endpoint, Amazon DocumentDB distributes the connection requests among the Amazon DocumentDB replicas in the cluster. This functionality can help balance your read workload across multiple Amazon DocumentDB replicas in your cluster.

If a failover occurs, and the Amazon DocumentDB replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Amazon DocumentDB replicas in the cluster, you can then reconnect to the reader endpoint.

$sel:replicationSourceIdentifier:DBCluster', dbCluster_replicationSourceIdentifier - Contains the identifier of the source cluster if this cluster is a secondary cluster.

DBCluster, dbCluster_status - Specifies the current state of this cluster.

$sel:storageEncrypted:DBCluster', dbCluster_storageEncrypted - Specifies whether the cluster is encrypted.

$sel:vpcSecurityGroups:DBCluster', dbCluster_vpcSecurityGroups - Provides a list of virtual private cloud (VPC) security groups that the cluster belongs to.

dbCluster_associatedRoles :: Lens' DBCluster (Maybe [DBClusterRole]) Source #

Provides a list of the Identity and Access Management (IAM) roles that are associated with the cluster. (IAM) roles that are associated with a cluster grant permission for the cluster to access other Amazon Web Services services on your behalf.

dbCluster_availabilityZones :: Lens' DBCluster (Maybe [Text]) Source #

Provides the list of Amazon EC2 Availability Zones that instances in the cluster can be created in.

dbCluster_backupRetentionPeriod :: Lens' DBCluster (Maybe Int) Source #

Specifies the number of days for which automatic snapshots are retained.

dbCluster_cloneGroupId :: Lens' DBCluster (Maybe Text) Source #

Identifies the clone group to which the DB cluster is associated.

dbCluster_clusterCreateTime :: Lens' DBCluster (Maybe UTCTime) Source #

Specifies the time when the cluster was created, in Universal Coordinated Time (UTC).

dbCluster_dbClusterArn :: Lens' DBCluster (Maybe Text) Source #

The Amazon Resource Name (ARN) for the cluster.

dbCluster_dbClusterIdentifier :: Lens' DBCluster (Maybe Text) Source #

Contains a user-supplied cluster identifier. This identifier is the unique key that identifies a cluster.

dbCluster_dbClusterMembers :: Lens' DBCluster (Maybe [DBClusterMember]) Source #

Provides the list of instances that make up the cluster.

dbCluster_dbClusterParameterGroup :: Lens' DBCluster (Maybe Text) Source #

Specifies the name of the cluster parameter group for the cluster.

dbCluster_dbSubnetGroup :: Lens' DBCluster (Maybe Text) Source #

Specifies information on the subnet group that is associated with the cluster, including the name, description, and subnets in the subnet group.

dbCluster_dbClusterResourceId :: Lens' DBCluster (Maybe Text) Source #

The Amazon Web Services Region-unique, immutable identifier for the cluster. This identifier is found in CloudTrail log entries whenever the KMS key for the cluster is accessed.

dbCluster_deletionProtection :: Lens' DBCluster (Maybe Bool) Source #

Specifies whether this cluster can be deleted. If DeletionProtection is enabled, the cluster cannot be deleted unless it is modified and DeletionProtection is disabled. DeletionProtection protects clusters from being accidentally deleted.

dbCluster_earliestRestorableTime :: Lens' DBCluster (Maybe UTCTime) Source #

The earliest time to which a database can be restored with point-in-time restore.

dbCluster_enabledCloudwatchLogsExports :: Lens' DBCluster (Maybe [Text]) Source #

A list of log types that this cluster is configured to export to Amazon CloudWatch Logs.

dbCluster_endpoint :: Lens' DBCluster (Maybe Text) Source #

Specifies the connection endpoint for the primary instance of the cluster.

dbCluster_engine :: Lens' DBCluster (Maybe Text) Source #

Provides the name of the database engine to be used for this cluster.

dbCluster_engineVersion :: Lens' DBCluster (Maybe Text) Source #

Indicates the database engine version.

dbCluster_hostedZoneId :: Lens' DBCluster (Maybe Text) Source #

Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.

dbCluster_kmsKeyId :: Lens' DBCluster (Maybe Text) Source #

If StorageEncrypted is true, the KMS key identifier for the encrypted cluster.

dbCluster_latestRestorableTime :: Lens' DBCluster (Maybe UTCTime) Source #

Specifies the latest time to which a database can be restored with point-in-time restore.

dbCluster_masterUsername :: Lens' DBCluster (Maybe Text) Source #

Contains the master user name for the cluster.

dbCluster_multiAZ :: Lens' DBCluster (Maybe Bool) Source #

Specifies whether the cluster has instances in multiple Availability Zones.

dbCluster_percentProgress :: Lens' DBCluster (Maybe Text) Source #

Specifies the progress of the operation as a percentage.

dbCluster_port :: Lens' DBCluster (Maybe Int) Source #

Specifies the port that the database engine is listening on.

dbCluster_preferredBackupWindow :: Lens' DBCluster (Maybe Text) Source #

Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.

dbCluster_preferredMaintenanceWindow :: Lens' DBCluster (Maybe Text) Source #

Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

dbCluster_readReplicaIdentifiers :: Lens' DBCluster (Maybe [Text]) Source #

Contains one or more identifiers of the secondary clusters that are associated with this cluster.

dbCluster_readerEndpoint :: Lens' DBCluster (Maybe Text) Source #

The reader endpoint for the cluster. The reader endpoint for a cluster load balances connections across the Amazon DocumentDB replicas that are available in a cluster. As clients request new connections to the reader endpoint, Amazon DocumentDB distributes the connection requests among the Amazon DocumentDB replicas in the cluster. This functionality can help balance your read workload across multiple Amazon DocumentDB replicas in your cluster.

If a failover occurs, and the Amazon DocumentDB replica that you are connected to is promoted to be the primary instance, your connection is dropped. To continue sending your read workload to other Amazon DocumentDB replicas in the cluster, you can then reconnect to the reader endpoint.

dbCluster_replicationSourceIdentifier :: Lens' DBCluster (Maybe Text) Source #

Contains the identifier of the source cluster if this cluster is a secondary cluster.

dbCluster_status :: Lens' DBCluster (Maybe Text) Source #

Specifies the current state of this cluster.

dbCluster_storageEncrypted :: Lens' DBCluster (Maybe Bool) Source #

Specifies whether the cluster is encrypted.

dbCluster_vpcSecurityGroups :: Lens' DBCluster (Maybe [VpcSecurityGroupMembership]) Source #

Provides a list of virtual private cloud (VPC) security groups that the cluster belongs to.

DBClusterMember

data DBClusterMember Source #

Contains information about an instance that is part of a cluster.

See: newDBClusterMember smart constructor.

Constructors

DBClusterMember' 

Fields

Instances

Instances details
FromXML DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

Generic DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

Associated Types

type Rep DBClusterMember :: Type -> Type #

Read DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

Show DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

NFData DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

Methods

rnf :: DBClusterMember -> () #

Eq DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

Hashable DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

type Rep DBClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterMember

type Rep DBClusterMember = D1 ('MetaData "DBClusterMember" "Amazonka.DocumentDB.Types.DBClusterMember" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterMember'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "dbClusterParameterGroupStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbInstanceIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "isClusterWriter") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "promotionTier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)))))

newDBClusterMember :: DBClusterMember Source #

Create a value of DBClusterMember with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbClusterParameterGroupStatus:DBClusterMember', dbClusterMember_dbClusterParameterGroupStatus - Specifies the status of the cluster parameter group for this member of the DB cluster.

$sel:dbInstanceIdentifier:DBClusterMember', dbClusterMember_dbInstanceIdentifier - Specifies the instance identifier for this member of the cluster.

$sel:isClusterWriter:DBClusterMember', dbClusterMember_isClusterWriter - A value that is true if the cluster member is the primary instance for the cluster and false otherwise.

$sel:promotionTier:DBClusterMember', dbClusterMember_promotionTier - A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.

dbClusterMember_dbClusterParameterGroupStatus :: Lens' DBClusterMember (Maybe Text) Source #

Specifies the status of the cluster parameter group for this member of the DB cluster.

dbClusterMember_dbInstanceIdentifier :: Lens' DBClusterMember (Maybe Text) Source #

Specifies the instance identifier for this member of the cluster.

dbClusterMember_isClusterWriter :: Lens' DBClusterMember (Maybe Bool) Source #

A value that is true if the cluster member is the primary instance for the cluster and false otherwise.

dbClusterMember_promotionTier :: Lens' DBClusterMember (Maybe Int) Source #

A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.

DBClusterParameterGroup

data DBClusterParameterGroup Source #

Detailed information about a cluster parameter group.

See: newDBClusterParameterGroup smart constructor.

Constructors

DBClusterParameterGroup' 

Fields

Instances

Instances details
FromXML DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

Generic DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

Associated Types

type Rep DBClusterParameterGroup :: Type -> Type #

Read DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

Show DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

NFData DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

Methods

rnf :: DBClusterParameterGroup -> () #

Eq DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

Hashable DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

type Rep DBClusterParameterGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroup

type Rep DBClusterParameterGroup = D1 ('MetaData "DBClusterParameterGroup" "Amazonka.DocumentDB.Types.DBClusterParameterGroup" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterParameterGroup'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "dbClusterParameterGroupArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbClusterParameterGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "dbParameterGroupFamily") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "description") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))

newDBClusterParameterGroup :: DBClusterParameterGroup Source #

Create a value of DBClusterParameterGroup with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbClusterParameterGroupArn:DBClusterParameterGroup', dbClusterParameterGroup_dbClusterParameterGroupArn - The Amazon Resource Name (ARN) for the cluster parameter group.

$sel:dbClusterParameterGroupName:DBClusterParameterGroup', dbClusterParameterGroup_dbClusterParameterGroupName - Provides the name of the cluster parameter group.

$sel:dbParameterGroupFamily:DBClusterParameterGroup', dbClusterParameterGroup_dbParameterGroupFamily - Provides the name of the parameter group family that this cluster parameter group is compatible with.

$sel:description:DBClusterParameterGroup', dbClusterParameterGroup_description - Provides the customer-specified description for this cluster parameter group.

dbClusterParameterGroup_dbClusterParameterGroupArn :: Lens' DBClusterParameterGroup (Maybe Text) Source #

The Amazon Resource Name (ARN) for the cluster parameter group.

dbClusterParameterGroup_dbParameterGroupFamily :: Lens' DBClusterParameterGroup (Maybe Text) Source #

Provides the name of the parameter group family that this cluster parameter group is compatible with.

dbClusterParameterGroup_description :: Lens' DBClusterParameterGroup (Maybe Text) Source #

Provides the customer-specified description for this cluster parameter group.

DBClusterParameterGroupNameMessage

data DBClusterParameterGroupNameMessage Source #

Contains the name of a cluster parameter group.

See: newDBClusterParameterGroupNameMessage smart constructor.

Constructors

DBClusterParameterGroupNameMessage' 

Fields

  • dbClusterParameterGroupName :: Maybe Text

    The name of a cluster parameter group.

    Constraints:

    • Must be from 1 to 255 letters or numbers.
    • The first character must be a letter.
    • Cannot end with a hyphen or contain two consecutive hyphens.

    This value is stored as a lowercase string.

Instances

Instances details
FromXML DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

Generic DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

Associated Types

type Rep DBClusterParameterGroupNameMessage :: Type -> Type #

Read DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

Show DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

NFData DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

Eq DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

Hashable DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

type Rep DBClusterParameterGroupNameMessage Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage

type Rep DBClusterParameterGroupNameMessage = D1 ('MetaData "DBClusterParameterGroupNameMessage" "Amazonka.DocumentDB.Types.DBClusterParameterGroupNameMessage" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterParameterGroupNameMessage'" 'PrefixI 'True) (S1 ('MetaSel ('Just "dbClusterParameterGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newDBClusterParameterGroupNameMessage :: DBClusterParameterGroupNameMessage Source #

Create a value of DBClusterParameterGroupNameMessage with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbClusterParameterGroupName:DBClusterParameterGroupNameMessage', dbClusterParameterGroupNameMessage_dbClusterParameterGroupName - The name of a cluster parameter group.

Constraints:

  • Must be from 1 to 255 letters or numbers.
  • The first character must be a letter.
  • Cannot end with a hyphen or contain two consecutive hyphens.

This value is stored as a lowercase string.

dbClusterParameterGroupNameMessage_dbClusterParameterGroupName :: Lens' DBClusterParameterGroupNameMessage (Maybe Text) Source #

The name of a cluster parameter group.

Constraints:

  • Must be from 1 to 255 letters or numbers.
  • The first character must be a letter.
  • Cannot end with a hyphen or contain two consecutive hyphens.

This value is stored as a lowercase string.

DBClusterRole

data DBClusterRole Source #

Describes an Identity and Access Management (IAM) role that is associated with a cluster.

See: newDBClusterRole smart constructor.

Constructors

DBClusterRole' 

Fields

  • roleArn :: Maybe Text

    The Amazon Resource Name (ARN) of the IAMrole that is associated with the DB cluster.

  • status :: Maybe Text

    Describes the state of association between the IAMrole and the cluster. The Status property returns one of the following values:

    • ACTIVE - The IAMrole ARN is associated with the cluster and can be used to access other Amazon Web Services services on your behalf.
    • PENDING - The IAMrole ARN is being associated with the cluster.
    • INVALID - The IAMrole ARN is associated with the cluster, but the cluster cannot assume the IAMrole to access other Amazon Web Services services on your behalf.

Instances

Instances details
FromXML DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

Generic DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

Associated Types

type Rep DBClusterRole :: Type -> Type #

Read DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

Show DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

NFData DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

Methods

rnf :: DBClusterRole -> () #

Eq DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

Hashable DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

type Rep DBClusterRole Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterRole

type Rep DBClusterRole = D1 ('MetaData "DBClusterRole" "Amazonka.DocumentDB.Types.DBClusterRole" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterRole'" 'PrefixI 'True) (S1 ('MetaSel ('Just "roleArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newDBClusterRole :: DBClusterRole Source #

Create a value of DBClusterRole with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:roleArn:DBClusterRole', dbClusterRole_roleArn - The Amazon Resource Name (ARN) of the IAMrole that is associated with the DB cluster.

$sel:status:DBClusterRole', dbClusterRole_status - Describes the state of association between the IAMrole and the cluster. The Status property returns one of the following values:

  • ACTIVE - The IAMrole ARN is associated with the cluster and can be used to access other Amazon Web Services services on your behalf.
  • PENDING - The IAMrole ARN is being associated with the cluster.
  • INVALID - The IAMrole ARN is associated with the cluster, but the cluster cannot assume the IAMrole to access other Amazon Web Services services on your behalf.

dbClusterRole_roleArn :: Lens' DBClusterRole (Maybe Text) Source #

The Amazon Resource Name (ARN) of the IAMrole that is associated with the DB cluster.

dbClusterRole_status :: Lens' DBClusterRole (Maybe Text) Source #

Describes the state of association between the IAMrole and the cluster. The Status property returns one of the following values:

  • ACTIVE - The IAMrole ARN is associated with the cluster and can be used to access other Amazon Web Services services on your behalf.
  • PENDING - The IAMrole ARN is being associated with the cluster.
  • INVALID - The IAMrole ARN is associated with the cluster, but the cluster cannot assume the IAMrole to access other Amazon Web Services services on your behalf.

DBClusterSnapshot

data DBClusterSnapshot Source #

Detailed information about a cluster snapshot.

See: newDBClusterSnapshot smart constructor.

Constructors

DBClusterSnapshot' 

Fields

Instances

Instances details
FromXML DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

Generic DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

Associated Types

type Rep DBClusterSnapshot :: Type -> Type #

Read DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

Show DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

NFData DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

Methods

rnf :: DBClusterSnapshot -> () #

Eq DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

Hashable DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

type Rep DBClusterSnapshot Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshot

type Rep DBClusterSnapshot = D1 ('MetaData "DBClusterSnapshot" "Amazonka.DocumentDB.Types.DBClusterSnapshot" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterSnapshot'" 'PrefixI 'True) ((((S1 ('MetaSel ('Just "availabilityZones") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "clusterCreateTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601))) :*: (S1 ('MetaSel ('Just "dbClusterIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbClusterSnapshotArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "dbClusterSnapshotIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "kmsKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: (((S1 ('MetaSel ('Just "masterUsername") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "percentProgress") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int))) :*: (S1 ('MetaSel ('Just "port") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "snapshotCreateTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)))) :*: ((S1 ('MetaSel ('Just "snapshotType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "sourceDBClusterSnapshotArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "storageEncrypted") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "vpcId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))))))

newDBClusterSnapshot :: DBClusterSnapshot Source #

Create a value of DBClusterSnapshot with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:availabilityZones:DBClusterSnapshot', dbClusterSnapshot_availabilityZones - Provides the list of Amazon EC2 Availability Zones that instances in the cluster snapshot can be restored in.

$sel:clusterCreateTime:DBClusterSnapshot', dbClusterSnapshot_clusterCreateTime - Specifies the time when the cluster was created, in Universal Coordinated Time (UTC).

$sel:dbClusterIdentifier:DBClusterSnapshot', dbClusterSnapshot_dbClusterIdentifier - Specifies the cluster identifier of the cluster that this cluster snapshot was created from.

$sel:dbClusterSnapshotArn:DBClusterSnapshot', dbClusterSnapshot_dbClusterSnapshotArn - The Amazon Resource Name (ARN) for the cluster snapshot.

$sel:dbClusterSnapshotIdentifier:DBClusterSnapshot', dbClusterSnapshot_dbClusterSnapshotIdentifier - Specifies the identifier for the cluster snapshot.

$sel:engine:DBClusterSnapshot', dbClusterSnapshot_engine - Specifies the name of the database engine.

$sel:engineVersion:DBClusterSnapshot', dbClusterSnapshot_engineVersion - Provides the version of the database engine for this cluster snapshot.

$sel:kmsKeyId:DBClusterSnapshot', dbClusterSnapshot_kmsKeyId - If StorageEncrypted is true, the KMS key identifier for the encrypted cluster snapshot.

$sel:masterUsername:DBClusterSnapshot', dbClusterSnapshot_masterUsername - Provides the master user name for the cluster snapshot.

$sel:percentProgress:DBClusterSnapshot', dbClusterSnapshot_percentProgress - Specifies the percentage of the estimated data that has been transferred.

$sel:port:DBClusterSnapshot', dbClusterSnapshot_port - Specifies the port that the cluster was listening on at the time of the snapshot.

$sel:snapshotCreateTime:DBClusterSnapshot', dbClusterSnapshot_snapshotCreateTime - Provides the time when the snapshot was taken, in UTC.

$sel:snapshotType:DBClusterSnapshot', dbClusterSnapshot_snapshotType - Provides the type of the cluster snapshot.

$sel:sourceDBClusterSnapshotArn:DBClusterSnapshot', dbClusterSnapshot_sourceDBClusterSnapshotArn - If the cluster snapshot was copied from a source cluster snapshot, the ARN for the source cluster snapshot; otherwise, a null value.

$sel:status:DBClusterSnapshot', dbClusterSnapshot_status - Specifies the status of this cluster snapshot.

$sel:storageEncrypted:DBClusterSnapshot', dbClusterSnapshot_storageEncrypted - Specifies whether the cluster snapshot is encrypted.

$sel:vpcId:DBClusterSnapshot', dbClusterSnapshot_vpcId - Provides the virtual private cloud (VPC) ID that is associated with the cluster snapshot.

dbClusterSnapshot_availabilityZones :: Lens' DBClusterSnapshot (Maybe [Text]) Source #

Provides the list of Amazon EC2 Availability Zones that instances in the cluster snapshot can be restored in.

dbClusterSnapshot_clusterCreateTime :: Lens' DBClusterSnapshot (Maybe UTCTime) Source #

Specifies the time when the cluster was created, in Universal Coordinated Time (UTC).

dbClusterSnapshot_dbClusterIdentifier :: Lens' DBClusterSnapshot (Maybe Text) Source #

Specifies the cluster identifier of the cluster that this cluster snapshot was created from.

dbClusterSnapshot_dbClusterSnapshotArn :: Lens' DBClusterSnapshot (Maybe Text) Source #

The Amazon Resource Name (ARN) for the cluster snapshot.

dbClusterSnapshot_dbClusterSnapshotIdentifier :: Lens' DBClusterSnapshot (Maybe Text) Source #

Specifies the identifier for the cluster snapshot.

dbClusterSnapshot_engine :: Lens' DBClusterSnapshot (Maybe Text) Source #

Specifies the name of the database engine.

dbClusterSnapshot_engineVersion :: Lens' DBClusterSnapshot (Maybe Text) Source #

Provides the version of the database engine for this cluster snapshot.

dbClusterSnapshot_kmsKeyId :: Lens' DBClusterSnapshot (Maybe Text) Source #

If StorageEncrypted is true, the KMS key identifier for the encrypted cluster snapshot.

dbClusterSnapshot_masterUsername :: Lens' DBClusterSnapshot (Maybe Text) Source #

Provides the master user name for the cluster snapshot.

dbClusterSnapshot_percentProgress :: Lens' DBClusterSnapshot (Maybe Int) Source #

Specifies the percentage of the estimated data that has been transferred.

dbClusterSnapshot_port :: Lens' DBClusterSnapshot (Maybe Int) Source #

Specifies the port that the cluster was listening on at the time of the snapshot.

dbClusterSnapshot_snapshotCreateTime :: Lens' DBClusterSnapshot (Maybe UTCTime) Source #

Provides the time when the snapshot was taken, in UTC.

dbClusterSnapshot_snapshotType :: Lens' DBClusterSnapshot (Maybe Text) Source #

Provides the type of the cluster snapshot.

dbClusterSnapshot_sourceDBClusterSnapshotArn :: Lens' DBClusterSnapshot (Maybe Text) Source #

If the cluster snapshot was copied from a source cluster snapshot, the ARN for the source cluster snapshot; otherwise, a null value.

dbClusterSnapshot_status :: Lens' DBClusterSnapshot (Maybe Text) Source #

Specifies the status of this cluster snapshot.

dbClusterSnapshot_storageEncrypted :: Lens' DBClusterSnapshot (Maybe Bool) Source #

Specifies whether the cluster snapshot is encrypted.

dbClusterSnapshot_vpcId :: Lens' DBClusterSnapshot (Maybe Text) Source #

Provides the virtual private cloud (VPC) ID that is associated with the cluster snapshot.

DBClusterSnapshotAttribute

data DBClusterSnapshotAttribute Source #

Contains the name and values of a manual cluster snapshot attribute.

Manual cluster snapshot attributes are used to authorize other Amazon Web Services accounts to restore a manual cluster snapshot.

See: newDBClusterSnapshotAttribute smart constructor.

Constructors

DBClusterSnapshotAttribute' 

Fields

  • attributeName :: Maybe Text

    The name of the manual cluster snapshot attribute.

    The attribute named restore refers to the list of Amazon Web Services accounts that have permission to copy or restore the manual cluster snapshot.

  • attributeValues :: Maybe [Text]

    The values for the manual cluster snapshot attribute.

    If the AttributeName field is set to restore, then this element returns a list of IDs of the Amazon Web Services accounts that are authorized to copy or restore the manual cluster snapshot. If a value of all is in the list, then the manual cluster snapshot is public and available for any Amazon Web Services account to copy or restore.

Instances

Instances details
FromXML DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

Generic DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

Associated Types

type Rep DBClusterSnapshotAttribute :: Type -> Type #

Read DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

Show DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

NFData DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

Eq DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

Hashable DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

type Rep DBClusterSnapshotAttribute Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute

type Rep DBClusterSnapshotAttribute = D1 ('MetaData "DBClusterSnapshotAttribute" "Amazonka.DocumentDB.Types.DBClusterSnapshotAttribute" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterSnapshotAttribute'" 'PrefixI 'True) (S1 ('MetaSel ('Just "attributeName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "attributeValues") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))))

newDBClusterSnapshotAttribute :: DBClusterSnapshotAttribute Source #

Create a value of DBClusterSnapshotAttribute with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:attributeName:DBClusterSnapshotAttribute', dbClusterSnapshotAttribute_attributeName - The name of the manual cluster snapshot attribute.

The attribute named restore refers to the list of Amazon Web Services accounts that have permission to copy or restore the manual cluster snapshot.

$sel:attributeValues:DBClusterSnapshotAttribute', dbClusterSnapshotAttribute_attributeValues - The values for the manual cluster snapshot attribute.

If the AttributeName field is set to restore, then this element returns a list of IDs of the Amazon Web Services accounts that are authorized to copy or restore the manual cluster snapshot. If a value of all is in the list, then the manual cluster snapshot is public and available for any Amazon Web Services account to copy or restore.

dbClusterSnapshotAttribute_attributeName :: Lens' DBClusterSnapshotAttribute (Maybe Text) Source #

The name of the manual cluster snapshot attribute.

The attribute named restore refers to the list of Amazon Web Services accounts that have permission to copy or restore the manual cluster snapshot.

dbClusterSnapshotAttribute_attributeValues :: Lens' DBClusterSnapshotAttribute (Maybe [Text]) Source #

The values for the manual cluster snapshot attribute.

If the AttributeName field is set to restore, then this element returns a list of IDs of the Amazon Web Services accounts that are authorized to copy or restore the manual cluster snapshot. If a value of all is in the list, then the manual cluster snapshot is public and available for any Amazon Web Services account to copy or restore.

DBClusterSnapshotAttributesResult

data DBClusterSnapshotAttributesResult Source #

Detailed information about the attributes that are associated with a cluster snapshot.

See: newDBClusterSnapshotAttributesResult smart constructor.

Constructors

DBClusterSnapshotAttributesResult' 

Fields

Instances

Instances details
FromXML DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

Generic DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

Associated Types

type Rep DBClusterSnapshotAttributesResult :: Type -> Type #

Read DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

Show DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

NFData DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

Eq DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

Hashable DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

type Rep DBClusterSnapshotAttributesResult Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult

type Rep DBClusterSnapshotAttributesResult = D1 ('MetaData "DBClusterSnapshotAttributesResult" "Amazonka.DocumentDB.Types.DBClusterSnapshotAttributesResult" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBClusterSnapshotAttributesResult'" 'PrefixI 'True) (S1 ('MetaSel ('Just "dbClusterSnapshotAttributes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [DBClusterSnapshotAttribute])) :*: S1 ('MetaSel ('Just "dbClusterSnapshotIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newDBClusterSnapshotAttributesResult :: DBClusterSnapshotAttributesResult Source #

Create a value of DBClusterSnapshotAttributesResult with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbClusterSnapshotAttributes:DBClusterSnapshotAttributesResult', dbClusterSnapshotAttributesResult_dbClusterSnapshotAttributes - The list of attributes and values for the cluster snapshot.

$sel:dbClusterSnapshotIdentifier:DBClusterSnapshotAttributesResult', dbClusterSnapshotAttributesResult_dbClusterSnapshotIdentifier - The identifier of the cluster snapshot that the attributes apply to.

dbClusterSnapshotAttributesResult_dbClusterSnapshotIdentifier :: Lens' DBClusterSnapshotAttributesResult (Maybe Text) Source #

The identifier of the cluster snapshot that the attributes apply to.

DBEngineVersion

data DBEngineVersion Source #

Detailed information about an engine version.

See: newDBEngineVersion smart constructor.

Constructors

DBEngineVersion' 

Fields

Instances

Instances details
FromXML DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

Generic DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

Associated Types

type Rep DBEngineVersion :: Type -> Type #

Read DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

Show DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

NFData DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

Methods

rnf :: DBEngineVersion -> () #

Eq DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

Hashable DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

type Rep DBEngineVersion Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBEngineVersion

type Rep DBEngineVersion = D1 ('MetaData "DBEngineVersion" "Amazonka.DocumentDB.Types.DBEngineVersion" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBEngineVersion'" 'PrefixI 'True) (((S1 ('MetaSel ('Just "dbEngineDescription") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbEngineVersionDescription") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "dbParameterGroupFamily") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "exportableLogTypes") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))) :*: (S1 ('MetaSel ('Just "supportsLogExportsToCloudwatchLogs") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "validUpgradeTarget") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [UpgradeTarget]))))))

newDBEngineVersion :: DBEngineVersion Source #

Create a value of DBEngineVersion with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbEngineDescription:DBEngineVersion', dbEngineVersion_dbEngineDescription - The description of the database engine.

$sel:dbEngineVersionDescription:DBEngineVersion', dbEngineVersion_dbEngineVersionDescription - The description of the database engine version.

$sel:dbParameterGroupFamily:DBEngineVersion', dbEngineVersion_dbParameterGroupFamily - The name of the parameter group family for the database engine.

DBEngineVersion, dbEngineVersion_engine - The name of the database engine.

DBEngineVersion, dbEngineVersion_engineVersion - The version number of the database engine.

$sel:exportableLogTypes:DBEngineVersion', dbEngineVersion_exportableLogTypes - The types of logs that the database engine has available for export to Amazon CloudWatch Logs.

$sel:supportsLogExportsToCloudwatchLogs:DBEngineVersion', dbEngineVersion_supportsLogExportsToCloudwatchLogs - A value that indicates whether the engine version supports exporting the log types specified by ExportableLogTypes to CloudWatch Logs.

$sel:validUpgradeTarget:DBEngineVersion', dbEngineVersion_validUpgradeTarget - A list of engine versions that this database engine version can be upgraded to.

dbEngineVersion_dbEngineDescription :: Lens' DBEngineVersion (Maybe Text) Source #

The description of the database engine.

dbEngineVersion_dbEngineVersionDescription :: Lens' DBEngineVersion (Maybe Text) Source #

The description of the database engine version.

dbEngineVersion_dbParameterGroupFamily :: Lens' DBEngineVersion (Maybe Text) Source #

The name of the parameter group family for the database engine.

dbEngineVersion_engine :: Lens' DBEngineVersion (Maybe Text) Source #

The name of the database engine.

dbEngineVersion_engineVersion :: Lens' DBEngineVersion (Maybe Text) Source #

The version number of the database engine.

dbEngineVersion_exportableLogTypes :: Lens' DBEngineVersion (Maybe [Text]) Source #

The types of logs that the database engine has available for export to Amazon CloudWatch Logs.

dbEngineVersion_supportsLogExportsToCloudwatchLogs :: Lens' DBEngineVersion (Maybe Bool) Source #

A value that indicates whether the engine version supports exporting the log types specified by ExportableLogTypes to CloudWatch Logs.

dbEngineVersion_validUpgradeTarget :: Lens' DBEngineVersion (Maybe [UpgradeTarget]) Source #

A list of engine versions that this database engine version can be upgraded to.

DBInstance

data DBInstance Source #

Detailed information about an instance.

See: newDBInstance smart constructor.

Constructors

DBInstance' 

Fields

Instances

Instances details
FromXML DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

Generic DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

Associated Types

type Rep DBInstance :: Type -> Type #

Read DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

Show DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

NFData DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

Methods

rnf :: DBInstance -> () #

Eq DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

Hashable DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

type Rep DBInstance Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstance

type Rep DBInstance = D1 ('MetaData "DBInstance" "Amazonka.DocumentDB.Types.DBInstance" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBInstance'" 'PrefixI 'True) ((((S1 ('MetaSel ('Just "autoMinorVersionUpgrade") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: (S1 ('MetaSel ('Just "availabilityZone") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "backupRetentionPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)))) :*: (S1 ('MetaSel ('Just "cACertificateIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "copyTagsToSnapshot") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "dbClusterIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 ('MetaSel ('Just "dbInstanceArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "dbInstanceClass") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbInstanceIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "dbInstanceStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbSubnetGroup") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe DBSubnetGroup))) :*: (S1 ('MetaSel ('Just "dbiResourceId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "enabledCloudwatchLogsExports") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])))))) :*: (((S1 ('MetaSel ('Just "endpoint") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Endpoint)) :*: (S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "instanceCreateTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "kmsKeyId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "latestRestorableTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "pendingModifiedValues") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe PendingModifiedValues))))) :*: ((S1 ('MetaSel ('Just "preferredBackupWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "preferredMaintenanceWindow") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "promotionTier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)))) :*: ((S1 ('MetaSel ('Just "publiclyAccessible") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "statusInfos") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [DBInstanceStatusInfo]))) :*: (S1 ('MetaSel ('Just "storageEncrypted") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "vpcSecurityGroups") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [VpcSecurityGroupMembership]))))))))

newDBInstance :: DBInstance Source #

Create a value of DBInstance with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:autoMinorVersionUpgrade:DBInstance', dbInstance_autoMinorVersionUpgrade - Does not apply. This parameter does not apply to Amazon DocumentDB. Amazon DocumentDB does not perform minor version upgrades regardless of the value set.

$sel:availabilityZone:DBInstance', dbInstance_availabilityZone - Specifies the name of the Availability Zone that the instance is located in.

DBInstance, dbInstance_backupRetentionPeriod - Specifies the number of days for which automatic snapshots are retained.

DBInstance, dbInstance_cACertificateIdentifier - The identifier of the CA certificate for this DB instance.

$sel:copyTagsToSnapshot:DBInstance', dbInstance_copyTagsToSnapshot - A value that indicates whether to copy tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.

$sel:dbClusterIdentifier:DBInstance', dbInstance_dbClusterIdentifier - Contains the name of the cluster that the instance is a member of if the instance is a member of a cluster.

$sel:dbInstanceArn:DBInstance', dbInstance_dbInstanceArn - The Amazon Resource Name (ARN) for the instance.

DBInstance, dbInstance_dbInstanceClass - Contains the name of the compute and memory capacity class of the instance.

DBInstance, dbInstance_dbInstanceIdentifier - Contains a user-provided database identifier. This identifier is the unique key that identifies an instance.

$sel:dbInstanceStatus:DBInstance', dbInstance_dbInstanceStatus - Specifies the current state of this database.

$sel:dbSubnetGroup:DBInstance', dbInstance_dbSubnetGroup - Specifies information on the subnet group that is associated with the instance, including the name, description, and subnets in the subnet group.

$sel:dbiResourceId:DBInstance', dbInstance_dbiResourceId - The Amazon Web Services Region-unique, immutable identifier for the instance. This identifier is found in CloudTrail log entries whenever the KMS key for the instance is accessed.

$sel:enabledCloudwatchLogsExports:DBInstance', dbInstance_enabledCloudwatchLogsExports - A list of log types that this instance is configured to export to CloudWatch Logs.

$sel:endpoint:DBInstance', dbInstance_endpoint - Specifies the connection endpoint.

$sel:engine:DBInstance', dbInstance_engine - Provides the name of the database engine to be used for this instance.

DBInstance, dbInstance_engineVersion - Indicates the database engine version.

$sel:instanceCreateTime:DBInstance', dbInstance_instanceCreateTime - Provides the date and time that the instance was created.

$sel:kmsKeyId:DBInstance', dbInstance_kmsKeyId - If StorageEncrypted is true, the KMS key identifier for the encrypted instance.

$sel:latestRestorableTime:DBInstance', dbInstance_latestRestorableTime - Specifies the latest time to which a database can be restored with point-in-time restore.

$sel:pendingModifiedValues:DBInstance', dbInstance_pendingModifiedValues - Specifies that changes to the instance are pending. This element is included only when changes are pending. Specific changes are identified by subelements.

$sel:preferredBackupWindow:DBInstance', dbInstance_preferredBackupWindow - Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.

$sel:preferredMaintenanceWindow:DBInstance', dbInstance_preferredMaintenanceWindow - Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

$sel:promotionTier:DBInstance', dbInstance_promotionTier - A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.

$sel:publiclyAccessible:DBInstance', dbInstance_publiclyAccessible - Not supported. Amazon DocumentDB does not currently support public endpoints. The value of PubliclyAccessible is always false.

$sel:statusInfos:DBInstance', dbInstance_statusInfos - The status of a read replica. If the instance is not a read replica, this is blank.

$sel:storageEncrypted:DBInstance', dbInstance_storageEncrypted - Specifies whether or not the instance is encrypted.

$sel:vpcSecurityGroups:DBInstance', dbInstance_vpcSecurityGroups - Provides a list of VPC security group elements that the instance belongs to.

dbInstance_autoMinorVersionUpgrade :: Lens' DBInstance (Maybe Bool) Source #

Does not apply. This parameter does not apply to Amazon DocumentDB. Amazon DocumentDB does not perform minor version upgrades regardless of the value set.

dbInstance_availabilityZone :: Lens' DBInstance (Maybe Text) Source #

Specifies the name of the Availability Zone that the instance is located in.

dbInstance_backupRetentionPeriod :: Lens' DBInstance (Maybe Int) Source #

Specifies the number of days for which automatic snapshots are retained.

dbInstance_cACertificateIdentifier :: Lens' DBInstance (Maybe Text) Source #

The identifier of the CA certificate for this DB instance.

dbInstance_copyTagsToSnapshot :: Lens' DBInstance (Maybe Bool) Source #

A value that indicates whether to copy tags from the DB instance to snapshots of the DB instance. By default, tags are not copied.

dbInstance_dbClusterIdentifier :: Lens' DBInstance (Maybe Text) Source #

Contains the name of the cluster that the instance is a member of if the instance is a member of a cluster.

dbInstance_dbInstanceArn :: Lens' DBInstance (Maybe Text) Source #

The Amazon Resource Name (ARN) for the instance.

dbInstance_dbInstanceClass :: Lens' DBInstance (Maybe Text) Source #

Contains the name of the compute and memory capacity class of the instance.

dbInstance_dbInstanceIdentifier :: Lens' DBInstance (Maybe Text) Source #

Contains a user-provided database identifier. This identifier is the unique key that identifies an instance.

dbInstance_dbInstanceStatus :: Lens' DBInstance (Maybe Text) Source #

Specifies the current state of this database.

dbInstance_dbSubnetGroup :: Lens' DBInstance (Maybe DBSubnetGroup) Source #

Specifies information on the subnet group that is associated with the instance, including the name, description, and subnets in the subnet group.

dbInstance_dbiResourceId :: Lens' DBInstance (Maybe Text) Source #

The Amazon Web Services Region-unique, immutable identifier for the instance. This identifier is found in CloudTrail log entries whenever the KMS key for the instance is accessed.

dbInstance_enabledCloudwatchLogsExports :: Lens' DBInstance (Maybe [Text]) Source #

A list of log types that this instance is configured to export to CloudWatch Logs.

dbInstance_endpoint :: Lens' DBInstance (Maybe Endpoint) Source #

Specifies the connection endpoint.

dbInstance_engine :: Lens' DBInstance (Maybe Text) Source #

Provides the name of the database engine to be used for this instance.

dbInstance_engineVersion :: Lens' DBInstance (Maybe Text) Source #

Indicates the database engine version.

dbInstance_instanceCreateTime :: Lens' DBInstance (Maybe UTCTime) Source #

Provides the date and time that the instance was created.

dbInstance_kmsKeyId :: Lens' DBInstance (Maybe Text) Source #

If StorageEncrypted is true, the KMS key identifier for the encrypted instance.

dbInstance_latestRestorableTime :: Lens' DBInstance (Maybe UTCTime) Source #

Specifies the latest time to which a database can be restored with point-in-time restore.

dbInstance_pendingModifiedValues :: Lens' DBInstance (Maybe PendingModifiedValues) Source #

Specifies that changes to the instance are pending. This element is included only when changes are pending. Specific changes are identified by subelements.

dbInstance_preferredBackupWindow :: Lens' DBInstance (Maybe Text) Source #

Specifies the daily time range during which automated backups are created if automated backups are enabled, as determined by the BackupRetentionPeriod.

dbInstance_preferredMaintenanceWindow :: Lens' DBInstance (Maybe Text) Source #

Specifies the weekly time range during which system maintenance can occur, in Universal Coordinated Time (UTC).

dbInstance_promotionTier :: Lens' DBInstance (Maybe Int) Source #

A value that specifies the order in which an Amazon DocumentDB replica is promoted to the primary instance after a failure of the existing primary instance.

dbInstance_publiclyAccessible :: Lens' DBInstance (Maybe Bool) Source #

Not supported. Amazon DocumentDB does not currently support public endpoints. The value of PubliclyAccessible is always false.

dbInstance_statusInfos :: Lens' DBInstance (Maybe [DBInstanceStatusInfo]) Source #

The status of a read replica. If the instance is not a read replica, this is blank.

dbInstance_storageEncrypted :: Lens' DBInstance (Maybe Bool) Source #

Specifies whether or not the instance is encrypted.

dbInstance_vpcSecurityGroups :: Lens' DBInstance (Maybe [VpcSecurityGroupMembership]) Source #

Provides a list of VPC security group elements that the instance belongs to.

DBInstanceStatusInfo

data DBInstanceStatusInfo Source #

Provides a list of status information for an instance.

See: newDBInstanceStatusInfo smart constructor.

Constructors

DBInstanceStatusInfo' 

Fields

  • message :: Maybe Text

    Details of the error if there is an error for the instance. If the instance is not in an error state, this value is blank.

  • normal :: Maybe Bool

    A Boolean value that is true if the instance is operating normally, or false if the instance is in an error state.

  • status :: Maybe Text

    Status of the instance. For a StatusType of read replica, the values can be replicating, error, stopped, or terminated.

  • statusType :: Maybe Text

    This value is currently "read replication."

Instances

Instances details
FromXML DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

Generic DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

Associated Types

type Rep DBInstanceStatusInfo :: Type -> Type #

Read DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

Show DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

NFData DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

Methods

rnf :: DBInstanceStatusInfo -> () #

Eq DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

Hashable DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

type Rep DBInstanceStatusInfo Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBInstanceStatusInfo

type Rep DBInstanceStatusInfo = D1 ('MetaData "DBInstanceStatusInfo" "Amazonka.DocumentDB.Types.DBInstanceStatusInfo" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBInstanceStatusInfo'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "message") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "normal") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "statusType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))

newDBInstanceStatusInfo :: DBInstanceStatusInfo Source #

Create a value of DBInstanceStatusInfo with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:message:DBInstanceStatusInfo', dbInstanceStatusInfo_message - Details of the error if there is an error for the instance. If the instance is not in an error state, this value is blank.

$sel:normal:DBInstanceStatusInfo', dbInstanceStatusInfo_normal - A Boolean value that is true if the instance is operating normally, or false if the instance is in an error state.

$sel:status:DBInstanceStatusInfo', dbInstanceStatusInfo_status - Status of the instance. For a StatusType of read replica, the values can be replicating, error, stopped, or terminated.

$sel:statusType:DBInstanceStatusInfo', dbInstanceStatusInfo_statusType - This value is currently "read replication."

dbInstanceStatusInfo_message :: Lens' DBInstanceStatusInfo (Maybe Text) Source #

Details of the error if there is an error for the instance. If the instance is not in an error state, this value is blank.

dbInstanceStatusInfo_normal :: Lens' DBInstanceStatusInfo (Maybe Bool) Source #

A Boolean value that is true if the instance is operating normally, or false if the instance is in an error state.

dbInstanceStatusInfo_status :: Lens' DBInstanceStatusInfo (Maybe Text) Source #

Status of the instance. For a StatusType of read replica, the values can be replicating, error, stopped, or terminated.

dbInstanceStatusInfo_statusType :: Lens' DBInstanceStatusInfo (Maybe Text) Source #

This value is currently "read replication."

DBSubnetGroup

data DBSubnetGroup Source #

Detailed information about a subnet group.

See: newDBSubnetGroup smart constructor.

Constructors

DBSubnetGroup' 

Fields

Instances

Instances details
FromXML DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

Generic DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

Associated Types

type Rep DBSubnetGroup :: Type -> Type #

Read DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

Show DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

NFData DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

Methods

rnf :: DBSubnetGroup -> () #

Eq DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

Hashable DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

type Rep DBSubnetGroup Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.DBSubnetGroup

type Rep DBSubnetGroup = D1 ('MetaData "DBSubnetGroup" "Amazonka.DocumentDB.Types.DBSubnetGroup" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "DBSubnetGroup'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "dbSubnetGroupArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "dbSubnetGroupDescription") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbSubnetGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "subnetGroupStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "subnets") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Subnet])) :*: S1 ('MetaSel ('Just "vpcId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))))

newDBSubnetGroup :: DBSubnetGroup Source #

Create a value of DBSubnetGroup with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbSubnetGroupArn:DBSubnetGroup', dbSubnetGroup_dbSubnetGroupArn - The Amazon Resource Name (ARN) for the DB subnet group.

$sel:dbSubnetGroupDescription:DBSubnetGroup', dbSubnetGroup_dbSubnetGroupDescription - Provides the description of the subnet group.

$sel:dbSubnetGroupName:DBSubnetGroup', dbSubnetGroup_dbSubnetGroupName - The name of the subnet group.

$sel:subnetGroupStatus:DBSubnetGroup', dbSubnetGroup_subnetGroupStatus - Provides the status of the subnet group.

$sel:subnets:DBSubnetGroup', dbSubnetGroup_subnets - Detailed information about one or more subnets within a subnet group.

$sel:vpcId:DBSubnetGroup', dbSubnetGroup_vpcId - Provides the virtual private cloud (VPC) ID of the subnet group.

dbSubnetGroup_dbSubnetGroupArn :: Lens' DBSubnetGroup (Maybe Text) Source #

The Amazon Resource Name (ARN) for the DB subnet group.

dbSubnetGroup_dbSubnetGroupDescription :: Lens' DBSubnetGroup (Maybe Text) Source #

Provides the description of the subnet group.

dbSubnetGroup_subnetGroupStatus :: Lens' DBSubnetGroup (Maybe Text) Source #

Provides the status of the subnet group.

dbSubnetGroup_subnets :: Lens' DBSubnetGroup (Maybe [Subnet]) Source #

Detailed information about one or more subnets within a subnet group.

dbSubnetGroup_vpcId :: Lens' DBSubnetGroup (Maybe Text) Source #

Provides the virtual private cloud (VPC) ID of the subnet group.

Endpoint

data Endpoint Source #

Network information for accessing a cluster or instance. Client programs must specify a valid endpoint to access these Amazon DocumentDB resources.

See: newEndpoint smart constructor.

Constructors

Endpoint' 

Fields

Instances

Instances details
FromXML Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Generic Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Associated Types

type Rep Endpoint :: Type -> Type #

Methods

from :: Endpoint -> Rep Endpoint x #

to :: Rep Endpoint x -> Endpoint #

Read Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Show Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

NFData Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Methods

rnf :: Endpoint -> () #

Eq Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Hashable Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

Methods

hashWithSalt :: Int -> Endpoint -> Int #

hash :: Endpoint -> Int #

type Rep Endpoint Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Endpoint

type Rep Endpoint = D1 ('MetaData "Endpoint" "Amazonka.DocumentDB.Types.Endpoint" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "Endpoint'" 'PrefixI 'True) (S1 ('MetaSel ('Just "address") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "hostedZoneId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "port") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)))))

newEndpoint :: Endpoint Source #

Create a value of Endpoint with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:address:Endpoint', endpoint_address - Specifies the DNS address of the instance.

$sel:hostedZoneId:Endpoint', endpoint_hostedZoneId - Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.

$sel:port:Endpoint', endpoint_port - Specifies the port that the database engine is listening on.

endpoint_address :: Lens' Endpoint (Maybe Text) Source #

Specifies the DNS address of the instance.

endpoint_hostedZoneId :: Lens' Endpoint (Maybe Text) Source #

Specifies the ID that Amazon Route 53 assigns when you create a hosted zone.

endpoint_port :: Lens' Endpoint (Maybe Int) Source #

Specifies the port that the database engine is listening on.

EngineDefaults

data EngineDefaults Source #

Contains the result of a successful invocation of the DescribeEngineDefaultClusterParameters operation.

See: newEngineDefaults smart constructor.

Constructors

EngineDefaults' 

Fields

  • dbParameterGroupFamily :: Maybe Text

    The name of the cluster parameter group family to return the engine parameter information for.

  • marker :: Maybe Text

    An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

  • parameters :: Maybe [Parameter]

    The parameters of a particular cluster parameter group family.

Instances

Instances details
FromXML EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

Generic EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

Associated Types

type Rep EngineDefaults :: Type -> Type #

Read EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

Show EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

NFData EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

Methods

rnf :: EngineDefaults -> () #

Eq EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

Hashable EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

type Rep EngineDefaults Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EngineDefaults

type Rep EngineDefaults = D1 ('MetaData "EngineDefaults" "Amazonka.DocumentDB.Types.EngineDefaults" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "EngineDefaults'" 'PrefixI 'True) (S1 ('MetaSel ('Just "dbParameterGroupFamily") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "marker") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "parameters") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Parameter])))))

newEngineDefaults :: EngineDefaults Source #

Create a value of EngineDefaults with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbParameterGroupFamily:EngineDefaults', engineDefaults_dbParameterGroupFamily - The name of the cluster parameter group family to return the engine parameter information for.

$sel:marker:EngineDefaults', engineDefaults_marker - An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

$sel:parameters:EngineDefaults', engineDefaults_parameters - The parameters of a particular cluster parameter group family.

engineDefaults_dbParameterGroupFamily :: Lens' EngineDefaults (Maybe Text) Source #

The name of the cluster parameter group family to return the engine parameter information for.

engineDefaults_marker :: Lens' EngineDefaults (Maybe Text) Source #

An optional pagination token provided by a previous request. If this parameter is specified, the response includes only records beyond the marker, up to the value specified by MaxRecords.

engineDefaults_parameters :: Lens' EngineDefaults (Maybe [Parameter]) Source #

The parameters of a particular cluster parameter group family.

Event

data Event Source #

Detailed information about an event.

See: newEvent smart constructor.

Constructors

Event' 

Fields

Instances

Instances details
FromXML Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Methods

parseXML :: [Node] -> Either String Event #

Generic Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Associated Types

type Rep Event :: Type -> Type #

Methods

from :: Event -> Rep Event x #

to :: Rep Event x -> Event #

Read Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Show Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Methods

showsPrec :: Int -> Event -> ShowS #

show :: Event -> String #

showList :: [Event] -> ShowS #

NFData Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Methods

rnf :: Event -> () #

Eq Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Methods

(==) :: Event -> Event -> Bool #

(/=) :: Event -> Event -> Bool #

Hashable Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

Methods

hashWithSalt :: Int -> Event -> Int #

hash :: Event -> Int #

type Rep Event Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Event

newEvent :: Event Source #

Create a value of Event with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:date:Event', event_date - Specifies the date and time of the event.

$sel:eventCategories:Event', event_eventCategories - Specifies the category for the event.

$sel:message:Event', event_message - Provides the text of this event.

$sel:sourceArn:Event', event_sourceArn - The Amazon Resource Name (ARN) for the event.

$sel:sourceIdentifier:Event', event_sourceIdentifier - Provides the identifier for the source of the event.

$sel:sourceType:Event', event_sourceType - Specifies the source type for this event.

event_date :: Lens' Event (Maybe UTCTime) Source #

Specifies the date and time of the event.

event_eventCategories :: Lens' Event (Maybe [Text]) Source #

Specifies the category for the event.

event_message :: Lens' Event (Maybe Text) Source #

Provides the text of this event.

event_sourceArn :: Lens' Event (Maybe Text) Source #

The Amazon Resource Name (ARN) for the event.

event_sourceIdentifier :: Lens' Event (Maybe Text) Source #

Provides the identifier for the source of the event.

event_sourceType :: Lens' Event (Maybe SourceType) Source #

Specifies the source type for this event.

EventCategoriesMap

data EventCategoriesMap Source #

An event source type, accompanied by one or more event category names.

See: newEventCategoriesMap smart constructor.

Constructors

EventCategoriesMap' 

Fields

Instances

Instances details
FromXML EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

Generic EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

Associated Types

type Rep EventCategoriesMap :: Type -> Type #

Read EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

Show EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

NFData EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

Methods

rnf :: EventCategoriesMap -> () #

Eq EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

Hashable EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

type Rep EventCategoriesMap Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventCategoriesMap

type Rep EventCategoriesMap = D1 ('MetaData "EventCategoriesMap" "Amazonka.DocumentDB.Types.EventCategoriesMap" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "EventCategoriesMap'" 'PrefixI 'True) (S1 ('MetaSel ('Just "eventCategories") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "sourceType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newEventCategoriesMap :: EventCategoriesMap Source #

Create a value of EventCategoriesMap with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:eventCategories:EventCategoriesMap', eventCategoriesMap_eventCategories - The event categories for the specified source type.

$sel:sourceType:EventCategoriesMap', eventCategoriesMap_sourceType - The source type that the returned categories belong to.

eventCategoriesMap_eventCategories :: Lens' EventCategoriesMap (Maybe [Text]) Source #

The event categories for the specified source type.

eventCategoriesMap_sourceType :: Lens' EventCategoriesMap (Maybe Text) Source #

The source type that the returned categories belong to.

EventSubscription

data EventSubscription Source #

Detailed information about an event to which you have subscribed.

See: newEventSubscription smart constructor.

Constructors

EventSubscription' 

Fields

  • custSubscriptionId :: Maybe Text

    The Amazon DocumentDB event notification subscription ID.

  • customerAwsId :: Maybe Text

    The Amazon Web Services customer account that is associated with the Amazon DocumentDB event notification subscription.

  • enabled :: Maybe Bool

    A Boolean value indicating whether the subscription is enabled. A value of true indicates that the subscription is enabled.

  • eventCategoriesList :: Maybe [Text]

    A list of event categories for the Amazon DocumentDB event notification subscription.

  • eventSubscriptionArn :: Maybe Text

    The Amazon Resource Name (ARN) for the event subscription.

  • snsTopicArn :: Maybe Text

    The topic ARN of the Amazon DocumentDB event notification subscription.

  • sourceIdsList :: Maybe [Text]

    A list of source IDs for the Amazon DocumentDB event notification subscription.

  • sourceType :: Maybe Text

    The source type for the Amazon DocumentDB event notification subscription.

  • status :: Maybe Text

    The status of the Amazon DocumentDB event notification subscription.

    Constraints:

    Can be one of the following: creating, modifying, deleting, active, no-permission, topic-not-exist

    The no-permission status indicates that Amazon DocumentDB no longer has permission to post to the SNS topic. The topic-not-exist status indicates that the topic was deleted after the subscription was created.

  • subscriptionCreationTime :: Maybe Text

    The time at which the Amazon DocumentDB event notification subscription was created.

Instances

Instances details
FromXML EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

Generic EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

Associated Types

type Rep EventSubscription :: Type -> Type #

Read EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

Show EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

NFData EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

Methods

rnf :: EventSubscription -> () #

Eq EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

Hashable EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

type Rep EventSubscription Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.EventSubscription

type Rep EventSubscription = D1 ('MetaData "EventSubscription" "Amazonka.DocumentDB.Types.EventSubscription" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "EventSubscription'" 'PrefixI 'True) (((S1 ('MetaSel ('Just "custSubscriptionId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "customerAwsId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "enabled") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: (S1 ('MetaSel ('Just "eventCategoriesList") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "eventSubscriptionArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 ('MetaSel ('Just "snsTopicArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "sourceIdsList") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))) :*: (S1 ('MetaSel ('Just "sourceType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "subscriptionCreationTime") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))))

newEventSubscription :: EventSubscription Source #

Create a value of EventSubscription with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:custSubscriptionId:EventSubscription', eventSubscription_custSubscriptionId - The Amazon DocumentDB event notification subscription ID.

$sel:customerAwsId:EventSubscription', eventSubscription_customerAwsId - The Amazon Web Services customer account that is associated with the Amazon DocumentDB event notification subscription.

$sel:enabled:EventSubscription', eventSubscription_enabled - A Boolean value indicating whether the subscription is enabled. A value of true indicates that the subscription is enabled.

$sel:eventCategoriesList:EventSubscription', eventSubscription_eventCategoriesList - A list of event categories for the Amazon DocumentDB event notification subscription.

$sel:eventSubscriptionArn:EventSubscription', eventSubscription_eventSubscriptionArn - The Amazon Resource Name (ARN) for the event subscription.

$sel:snsTopicArn:EventSubscription', eventSubscription_snsTopicArn - The topic ARN of the Amazon DocumentDB event notification subscription.

$sel:sourceIdsList:EventSubscription', eventSubscription_sourceIdsList - A list of source IDs for the Amazon DocumentDB event notification subscription.

$sel:sourceType:EventSubscription', eventSubscription_sourceType - The source type for the Amazon DocumentDB event notification subscription.

$sel:status:EventSubscription', eventSubscription_status - The status of the Amazon DocumentDB event notification subscription.

Constraints:

Can be one of the following: creating, modifying, deleting, active, no-permission, topic-not-exist

The no-permission status indicates that Amazon DocumentDB no longer has permission to post to the SNS topic. The topic-not-exist status indicates that the topic was deleted after the subscription was created.

$sel:subscriptionCreationTime:EventSubscription', eventSubscription_subscriptionCreationTime - The time at which the Amazon DocumentDB event notification subscription was created.

eventSubscription_custSubscriptionId :: Lens' EventSubscription (Maybe Text) Source #

The Amazon DocumentDB event notification subscription ID.

eventSubscription_customerAwsId :: Lens' EventSubscription (Maybe Text) Source #

The Amazon Web Services customer account that is associated with the Amazon DocumentDB event notification subscription.

eventSubscription_enabled :: Lens' EventSubscription (Maybe Bool) Source #

A Boolean value indicating whether the subscription is enabled. A value of true indicates that the subscription is enabled.

eventSubscription_eventCategoriesList :: Lens' EventSubscription (Maybe [Text]) Source #

A list of event categories for the Amazon DocumentDB event notification subscription.

eventSubscription_eventSubscriptionArn :: Lens' EventSubscription (Maybe Text) Source #

The Amazon Resource Name (ARN) for the event subscription.

eventSubscription_snsTopicArn :: Lens' EventSubscription (Maybe Text) Source #

The topic ARN of the Amazon DocumentDB event notification subscription.

eventSubscription_sourceIdsList :: Lens' EventSubscription (Maybe [Text]) Source #

A list of source IDs for the Amazon DocumentDB event notification subscription.

eventSubscription_sourceType :: Lens' EventSubscription (Maybe Text) Source #

The source type for the Amazon DocumentDB event notification subscription.

eventSubscription_status :: Lens' EventSubscription (Maybe Text) Source #

The status of the Amazon DocumentDB event notification subscription.

Constraints:

Can be one of the following: creating, modifying, deleting, active, no-permission, topic-not-exist

The no-permission status indicates that Amazon DocumentDB no longer has permission to post to the SNS topic. The topic-not-exist status indicates that the topic was deleted after the subscription was created.

eventSubscription_subscriptionCreationTime :: Lens' EventSubscription (Maybe Text) Source #

The time at which the Amazon DocumentDB event notification subscription was created.

Filter

data Filter Source #

A named set of filter values, used to return a more specific list of results. You can use a filter to match a set of resources by specific criteria, such as IDs.

Wildcards are not supported in filters.

See: newFilter smart constructor.

Constructors

Filter' 

Fields

  • name :: Text

    The name of the filter. Filter names are case sensitive.

  • values :: [Text]

    One or more filter values. Filter values are case sensitive.

Instances

Instances details
ToQuery Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Generic Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Associated Types

type Rep Filter :: Type -> Type #

Methods

from :: Filter -> Rep Filter x #

to :: Rep Filter x -> Filter #

Read Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Show Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

NFData Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Methods

rnf :: Filter -> () #

Eq Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Methods

(==) :: Filter -> Filter -> Bool #

(/=) :: Filter -> Filter -> Bool #

Hashable Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

Methods

hashWithSalt :: Int -> Filter -> Int #

hash :: Filter -> Int #

type Rep Filter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Filter

type Rep Filter = D1 ('MetaData "Filter" "Amazonka.DocumentDB.Types.Filter" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "Filter'" 'PrefixI 'True) (S1 ('MetaSel ('Just "name") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 Text) :*: S1 ('MetaSel ('Just "values") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 [Text])))

newFilter Source #

Create a value of Filter with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:name:Filter', filter_name - The name of the filter. Filter names are case sensitive.

$sel:values:Filter', filter_values - One or more filter values. Filter values are case sensitive.

filter_name :: Lens' Filter Text Source #

The name of the filter. Filter names are case sensitive.

filter_values :: Lens' Filter [Text] Source #

One or more filter values. Filter values are case sensitive.

GlobalCluster

data GlobalCluster Source #

A data type representing an Amazon DocumentDB global cluster.

See: newGlobalCluster smart constructor.

Constructors

GlobalCluster' 

Fields

Instances

Instances details
FromXML GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

Generic GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

Associated Types

type Rep GlobalCluster :: Type -> Type #

Read GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

Show GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

NFData GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

Methods

rnf :: GlobalCluster -> () #

Eq GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

Hashable GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

type Rep GlobalCluster Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalCluster

type Rep GlobalCluster = D1 ('MetaData "GlobalCluster" "Amazonka.DocumentDB.Types.GlobalCluster" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "GlobalCluster'" 'PrefixI 'True) (((S1 ('MetaSel ('Just "databaseName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "deletionProtection") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))) :*: (S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "globalClusterArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 ('MetaSel ('Just "globalClusterIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "globalClusterMembers") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [GlobalClusterMember]))) :*: (S1 ('MetaSel ('Just "globalClusterResourceId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "storageEncrypted") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)))))))

newGlobalCluster :: GlobalCluster Source #

Create a value of GlobalCluster with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:databaseName:GlobalCluster', globalCluster_databaseName - The default database name within the new global cluster.

$sel:deletionProtection:GlobalCluster', globalCluster_deletionProtection - The deletion protection setting for the new global cluster.

$sel:engine:GlobalCluster', globalCluster_engine - The Amazon DocumentDB database engine used by the global cluster.

$sel:engineVersion:GlobalCluster', globalCluster_engineVersion - Indicates the database engine version.

$sel:globalClusterArn:GlobalCluster', globalCluster_globalClusterArn - The Amazon Resource Name (ARN) for the global cluster.

$sel:globalClusterIdentifier:GlobalCluster', globalCluster_globalClusterIdentifier - Contains a user-supplied global cluster identifier. This identifier is the unique key that identifies a global cluster.

$sel:globalClusterMembers:GlobalCluster', globalCluster_globalClusterMembers - The list of cluster IDs for secondary clusters within the global cluster. Currently limited to one item.

$sel:globalClusterResourceId:GlobalCluster', globalCluster_globalClusterResourceId - The Amazon Web Services Region-unique, immutable identifier for the global database cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS customer master key (CMK) for the cluster is accessed.

$sel:status:GlobalCluster', globalCluster_status - Specifies the current state of this global cluster.

$sel:storageEncrypted:GlobalCluster', globalCluster_storageEncrypted - The storage encryption setting for the global cluster.

globalCluster_databaseName :: Lens' GlobalCluster (Maybe Text) Source #

The default database name within the new global cluster.

globalCluster_deletionProtection :: Lens' GlobalCluster (Maybe Bool) Source #

The deletion protection setting for the new global cluster.

globalCluster_engine :: Lens' GlobalCluster (Maybe Text) Source #

The Amazon DocumentDB database engine used by the global cluster.

globalCluster_engineVersion :: Lens' GlobalCluster (Maybe Text) Source #

Indicates the database engine version.

globalCluster_globalClusterArn :: Lens' GlobalCluster (Maybe Text) Source #

The Amazon Resource Name (ARN) for the global cluster.

globalCluster_globalClusterIdentifier :: Lens' GlobalCluster (Maybe Text) Source #

Contains a user-supplied global cluster identifier. This identifier is the unique key that identifies a global cluster.

globalCluster_globalClusterMembers :: Lens' GlobalCluster (Maybe [GlobalClusterMember]) Source #

The list of cluster IDs for secondary clusters within the global cluster. Currently limited to one item.

globalCluster_globalClusterResourceId :: Lens' GlobalCluster (Maybe Text) Source #

The Amazon Web Services Region-unique, immutable identifier for the global database cluster. This identifier is found in AWS CloudTrail log entries whenever the AWS KMS customer master key (CMK) for the cluster is accessed.

globalCluster_status :: Lens' GlobalCluster (Maybe Text) Source #

Specifies the current state of this global cluster.

globalCluster_storageEncrypted :: Lens' GlobalCluster (Maybe Bool) Source #

The storage encryption setting for the global cluster.

GlobalClusterMember

data GlobalClusterMember Source #

A data structure with information about any primary and secondary clusters associated with an Amazon DocumentDB global clusters.

See: newGlobalClusterMember smart constructor.

Constructors

GlobalClusterMember' 

Fields

  • dbClusterArn :: Maybe Text

    The Amazon Resource Name (ARN) for each Amazon DocumentDB cluster.

  • isWriter :: Maybe Bool

    Specifies whether the Amazon DocumentDB cluster is the primary cluster (that is, has read-write capability) for the Amazon DocumentDB global cluster with which it is associated.

  • readers :: Maybe [Text]

    The Amazon Resource Name (ARN) for each read-only secondary cluster associated with the Aurora global cluster.

Instances

Instances details
FromXML GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

Generic GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

Associated Types

type Rep GlobalClusterMember :: Type -> Type #

Read GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

Show GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

NFData GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

Methods

rnf :: GlobalClusterMember -> () #

Eq GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

Hashable GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

type Rep GlobalClusterMember Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.GlobalClusterMember

type Rep GlobalClusterMember = D1 ('MetaData "GlobalClusterMember" "Amazonka.DocumentDB.Types.GlobalClusterMember" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "GlobalClusterMember'" 'PrefixI 'True) (S1 ('MetaSel ('Just "dbClusterArn") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "isWriter") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "readers") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])))))

newGlobalClusterMember :: GlobalClusterMember Source #

Create a value of GlobalClusterMember with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:dbClusterArn:GlobalClusterMember', globalClusterMember_dbClusterArn - The Amazon Resource Name (ARN) for each Amazon DocumentDB cluster.

$sel:isWriter:GlobalClusterMember', globalClusterMember_isWriter - Specifies whether the Amazon DocumentDB cluster is the primary cluster (that is, has read-write capability) for the Amazon DocumentDB global cluster with which it is associated.

$sel:readers:GlobalClusterMember', globalClusterMember_readers - The Amazon Resource Name (ARN) for each read-only secondary cluster associated with the Aurora global cluster.

globalClusterMember_dbClusterArn :: Lens' GlobalClusterMember (Maybe Text) Source #

The Amazon Resource Name (ARN) for each Amazon DocumentDB cluster.

globalClusterMember_isWriter :: Lens' GlobalClusterMember (Maybe Bool) Source #

Specifies whether the Amazon DocumentDB cluster is the primary cluster (that is, has read-write capability) for the Amazon DocumentDB global cluster with which it is associated.

globalClusterMember_readers :: Lens' GlobalClusterMember (Maybe [Text]) Source #

The Amazon Resource Name (ARN) for each read-only secondary cluster associated with the Aurora global cluster.

OrderableDBInstanceOption

data OrderableDBInstanceOption Source #

The options that are available for an instance.

See: newOrderableDBInstanceOption smart constructor.

Constructors

OrderableDBInstanceOption' 

Fields

Instances

Instances details
FromXML OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

Generic OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

Associated Types

type Rep OrderableDBInstanceOption :: Type -> Type #

Read OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

Show OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

NFData OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

Eq OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

Hashable OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

type Rep OrderableDBInstanceOption Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.OrderableDBInstanceOption

type Rep OrderableDBInstanceOption = D1 ('MetaData "OrderableDBInstanceOption" "Amazonka.DocumentDB.Types.OrderableDBInstanceOption" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "OrderableDBInstanceOption'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "availabilityZones") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [AvailabilityZone])) :*: (S1 ('MetaSel ('Just "dbInstanceClass") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: (S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "licenseModel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "vpc") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))))))

newOrderableDBInstanceOption :: OrderableDBInstanceOption Source #

Create a value of OrderableDBInstanceOption with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:availabilityZones:OrderableDBInstanceOption', orderableDBInstanceOption_availabilityZones - A list of Availability Zones for an instance.

$sel:dbInstanceClass:OrderableDBInstanceOption', orderableDBInstanceOption_dbInstanceClass - The instance class for an instance.

$sel:engine:OrderableDBInstanceOption', orderableDBInstanceOption_engine - The engine type of an instance.

$sel:engineVersion:OrderableDBInstanceOption', orderableDBInstanceOption_engineVersion - The engine version of an instance.

$sel:licenseModel:OrderableDBInstanceOption', orderableDBInstanceOption_licenseModel - The license model for an instance.

$sel:vpc:OrderableDBInstanceOption', orderableDBInstanceOption_vpc - Indicates whether an instance is in a virtual private cloud (VPC).

orderableDBInstanceOption_vpc :: Lens' OrderableDBInstanceOption (Maybe Bool) Source #

Indicates whether an instance is in a virtual private cloud (VPC).

Parameter

data Parameter Source #

Detailed information about an individual parameter.

See: newParameter smart constructor.

Constructors

Parameter' 

Fields

Instances

Instances details
ToQuery Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

FromXML Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

Generic Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

Associated Types

type Rep Parameter :: Type -> Type #

Read Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

Show Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

NFData Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

Methods

rnf :: Parameter -> () #

Eq Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

Hashable Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

type Rep Parameter Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Parameter

newParameter :: Parameter Source #

Create a value of Parameter with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:allowedValues:Parameter', parameter_allowedValues - Specifies the valid range of values for the parameter.

$sel:applyMethod:Parameter', parameter_applyMethod - Indicates when to apply parameter updates.

$sel:applyType:Parameter', parameter_applyType - Specifies the engine-specific parameters type.

$sel:dataType:Parameter', parameter_dataType - Specifies the valid data type for the parameter.

$sel:description:Parameter', parameter_description - Provides a description of the parameter.

$sel:isModifiable:Parameter', parameter_isModifiable - Indicates whether (true) or not (false) the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.

$sel:minimumEngineVersion:Parameter', parameter_minimumEngineVersion - The earliest engine version to which the parameter can apply.

$sel:parameterName:Parameter', parameter_parameterName - Specifies the name of the parameter.

$sel:parameterValue:Parameter', parameter_parameterValue - Specifies the value of the parameter.

$sel:source:Parameter', parameter_source - Indicates the source of the parameter value.

parameter_allowedValues :: Lens' Parameter (Maybe Text) Source #

Specifies the valid range of values for the parameter.

parameter_applyMethod :: Lens' Parameter (Maybe ApplyMethod) Source #

Indicates when to apply parameter updates.

parameter_applyType :: Lens' Parameter (Maybe Text) Source #

Specifies the engine-specific parameters type.

parameter_dataType :: Lens' Parameter (Maybe Text) Source #

Specifies the valid data type for the parameter.

parameter_description :: Lens' Parameter (Maybe Text) Source #

Provides a description of the parameter.

parameter_isModifiable :: Lens' Parameter (Maybe Bool) Source #

Indicates whether (true) or not (false) the parameter can be modified. Some parameters have security or operational implications that prevent them from being changed.

parameter_minimumEngineVersion :: Lens' Parameter (Maybe Text) Source #

The earliest engine version to which the parameter can apply.

parameter_parameterName :: Lens' Parameter (Maybe Text) Source #

Specifies the name of the parameter.

parameter_parameterValue :: Lens' Parameter (Maybe Text) Source #

Specifies the value of the parameter.

parameter_source :: Lens' Parameter (Maybe Text) Source #

Indicates the source of the parameter value.

PendingCloudwatchLogsExports

data PendingCloudwatchLogsExports Source #

A list of the log types whose configuration is still pending. These log types are in the process of being activated or deactivated.

See: newPendingCloudwatchLogsExports smart constructor.

Constructors

PendingCloudwatchLogsExports' 

Fields

  • logTypesToDisable :: Maybe [Text]

    Log types that are in the process of being enabled. After they are enabled, these log types are exported to Amazon CloudWatch Logs.

  • logTypesToEnable :: Maybe [Text]

    Log types that are in the process of being deactivated. After they are deactivated, these log types aren't exported to CloudWatch Logs.

Instances

Instances details
FromXML PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

Generic PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

Associated Types

type Rep PendingCloudwatchLogsExports :: Type -> Type #

Read PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

Show PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

NFData PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

Eq PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

Hashable PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

type Rep PendingCloudwatchLogsExports Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports

type Rep PendingCloudwatchLogsExports = D1 ('MetaData "PendingCloudwatchLogsExports" "Amazonka.DocumentDB.Types.PendingCloudwatchLogsExports" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "PendingCloudwatchLogsExports'" 'PrefixI 'True) (S1 ('MetaSel ('Just "logTypesToDisable") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text])) :*: S1 ('MetaSel ('Just "logTypesToEnable") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [Text]))))

newPendingCloudwatchLogsExports :: PendingCloudwatchLogsExports Source #

Create a value of PendingCloudwatchLogsExports with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:logTypesToDisable:PendingCloudwatchLogsExports', pendingCloudwatchLogsExports_logTypesToDisable - Log types that are in the process of being enabled. After they are enabled, these log types are exported to Amazon CloudWatch Logs.

$sel:logTypesToEnable:PendingCloudwatchLogsExports', pendingCloudwatchLogsExports_logTypesToEnable - Log types that are in the process of being deactivated. After they are deactivated, these log types aren't exported to CloudWatch Logs.

pendingCloudwatchLogsExports_logTypesToDisable :: Lens' PendingCloudwatchLogsExports (Maybe [Text]) Source #

Log types that are in the process of being enabled. After they are enabled, these log types are exported to Amazon CloudWatch Logs.

pendingCloudwatchLogsExports_logTypesToEnable :: Lens' PendingCloudwatchLogsExports (Maybe [Text]) Source #

Log types that are in the process of being deactivated. After they are deactivated, these log types aren't exported to CloudWatch Logs.

PendingMaintenanceAction

data PendingMaintenanceAction Source #

Provides information about a pending maintenance action for a resource.

See: newPendingMaintenanceAction smart constructor.

Constructors

PendingMaintenanceAction' 

Fields

  • action :: Maybe Text

    The type of pending maintenance action that is available for the resource.

  • autoAppliedAfterDate :: Maybe ISO8601

    The date of the maintenance window when the action is applied. The maintenance action is applied to the resource during its first maintenance window after this date. If this date is specified, any next-maintenance opt-in requests are ignored.

  • currentApplyDate :: Maybe ISO8601

    The effective date when the pending maintenance action is applied to the resource.

  • description :: Maybe Text

    A description providing more detail about the maintenance action.

  • forcedApplyDate :: Maybe ISO8601

    The date when the maintenance action is automatically applied. The maintenance action is applied to the resource on this date regardless of the maintenance window for the resource. If this date is specified, any immediate opt-in requests are ignored.

  • optInStatus :: Maybe Text

    Indicates the type of opt-in request that has been received for the resource.

Instances

Instances details
FromXML PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

Generic PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

Associated Types

type Rep PendingMaintenanceAction :: Type -> Type #

Read PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

Show PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

NFData PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

Eq PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

Hashable PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

type Rep PendingMaintenanceAction Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingMaintenanceAction

type Rep PendingMaintenanceAction = D1 ('MetaData "PendingMaintenanceAction" "Amazonka.DocumentDB.Types.PendingMaintenanceAction" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "PendingMaintenanceAction'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "action") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "autoAppliedAfterDate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "currentApplyDate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)))) :*: (S1 ('MetaSel ('Just "description") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "forcedApplyDate") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe ISO8601)) :*: S1 ('MetaSel ('Just "optInStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))))

newPendingMaintenanceAction :: PendingMaintenanceAction Source #

Create a value of PendingMaintenanceAction with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:action:PendingMaintenanceAction', pendingMaintenanceAction_action - The type of pending maintenance action that is available for the resource.

$sel:autoAppliedAfterDate:PendingMaintenanceAction', pendingMaintenanceAction_autoAppliedAfterDate - The date of the maintenance window when the action is applied. The maintenance action is applied to the resource during its first maintenance window after this date. If this date is specified, any next-maintenance opt-in requests are ignored.

$sel:currentApplyDate:PendingMaintenanceAction', pendingMaintenanceAction_currentApplyDate - The effective date when the pending maintenance action is applied to the resource.

$sel:description:PendingMaintenanceAction', pendingMaintenanceAction_description - A description providing more detail about the maintenance action.

$sel:forcedApplyDate:PendingMaintenanceAction', pendingMaintenanceAction_forcedApplyDate - The date when the maintenance action is automatically applied. The maintenance action is applied to the resource on this date regardless of the maintenance window for the resource. If this date is specified, any immediate opt-in requests are ignored.

$sel:optInStatus:PendingMaintenanceAction', pendingMaintenanceAction_optInStatus - Indicates the type of opt-in request that has been received for the resource.

pendingMaintenanceAction_action :: Lens' PendingMaintenanceAction (Maybe Text) Source #

The type of pending maintenance action that is available for the resource.

pendingMaintenanceAction_autoAppliedAfterDate :: Lens' PendingMaintenanceAction (Maybe UTCTime) Source #

The date of the maintenance window when the action is applied. The maintenance action is applied to the resource during its first maintenance window after this date. If this date is specified, any next-maintenance opt-in requests are ignored.

pendingMaintenanceAction_currentApplyDate :: Lens' PendingMaintenanceAction (Maybe UTCTime) Source #

The effective date when the pending maintenance action is applied to the resource.

pendingMaintenanceAction_description :: Lens' PendingMaintenanceAction (Maybe Text) Source #

A description providing more detail about the maintenance action.

pendingMaintenanceAction_forcedApplyDate :: Lens' PendingMaintenanceAction (Maybe UTCTime) Source #

The date when the maintenance action is automatically applied. The maintenance action is applied to the resource on this date regardless of the maintenance window for the resource. If this date is specified, any immediate opt-in requests are ignored.

pendingMaintenanceAction_optInStatus :: Lens' PendingMaintenanceAction (Maybe Text) Source #

Indicates the type of opt-in request that has been received for the resource.

PendingModifiedValues

data PendingModifiedValues Source #

One or more modified settings for an instance. These modified settings have been requested, but haven't been applied yet.

See: newPendingModifiedValues smart constructor.

Constructors

PendingModifiedValues' 

Fields

Instances

Instances details
FromXML PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

Generic PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

Associated Types

type Rep PendingModifiedValues :: Type -> Type #

Read PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

Show PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

NFData PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

Methods

rnf :: PendingModifiedValues -> () #

Eq PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

Hashable PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

type Rep PendingModifiedValues Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.PendingModifiedValues

type Rep PendingModifiedValues = D1 ('MetaData "PendingModifiedValues" "Amazonka.DocumentDB.Types.PendingModifiedValues" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "PendingModifiedValues'" 'PrefixI 'True) (((S1 ('MetaSel ('Just "allocatedStorage") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: (S1 ('MetaSel ('Just "backupRetentionPeriod") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "cACertificateIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "dbInstanceClass") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "dbInstanceIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "dbSubnetGroupName") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))) :*: ((S1 ('MetaSel ('Just "iops") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: (S1 ('MetaSel ('Just "licenseModel") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "masterUserPassword") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))) :*: ((S1 ('MetaSel ('Just "multiAZ") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "pendingCloudwatchLogsExports") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe PendingCloudwatchLogsExports))) :*: (S1 ('MetaSel ('Just "port") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Int)) :*: S1 ('MetaSel ('Just "storageType") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))))

newPendingModifiedValues :: PendingModifiedValues Source #

Create a value of PendingModifiedValues with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:allocatedStorage:PendingModifiedValues', pendingModifiedValues_allocatedStorage - Contains the new AllocatedStorage size for then instance that will be applied or is currently being applied.

$sel:backupRetentionPeriod:PendingModifiedValues', pendingModifiedValues_backupRetentionPeriod - Specifies the pending number of days for which automated backups are retained.

$sel:cACertificateIdentifier:PendingModifiedValues', pendingModifiedValues_cACertificateIdentifier - Specifies the identifier of the certificate authority (CA) certificate for the DB instance.

$sel:dbInstanceClass:PendingModifiedValues', pendingModifiedValues_dbInstanceClass - Contains the new DBInstanceClass for the instance that will be applied or is currently being applied.

$sel:dbInstanceIdentifier:PendingModifiedValues', pendingModifiedValues_dbInstanceIdentifier - Contains the new DBInstanceIdentifier for the instance that will be applied or is currently being applied.

$sel:dbSubnetGroupName:PendingModifiedValues', pendingModifiedValues_dbSubnetGroupName - The new subnet group for the instance.

$sel:engineVersion:PendingModifiedValues', pendingModifiedValues_engineVersion - Indicates the database engine version.

$sel:iops:PendingModifiedValues', pendingModifiedValues_iops - Specifies the new Provisioned IOPS value for the instance that will be applied or is currently being applied.

$sel:licenseModel:PendingModifiedValues', pendingModifiedValues_licenseModel - The license model for the instance.

Valid values: license-included, bring-your-own-license, general-public-license

$sel:masterUserPassword:PendingModifiedValues', pendingModifiedValues_masterUserPassword - Contains the pending or currently in-progress change of the master credentials for the instance.

$sel:multiAZ:PendingModifiedValues', pendingModifiedValues_multiAZ - Indicates that the Single-AZ instance is to change to a Multi-AZ deployment.

$sel:pendingCloudwatchLogsExports:PendingModifiedValues', pendingModifiedValues_pendingCloudwatchLogsExports - A list of the log types whose configuration is still pending. These log types are in the process of being activated or deactivated.

$sel:port:PendingModifiedValues', pendingModifiedValues_port - Specifies the pending port for the instance.

$sel:storageType:PendingModifiedValues', pendingModifiedValues_storageType - Specifies the storage type to be associated with the instance.

pendingModifiedValues_allocatedStorage :: Lens' PendingModifiedValues (Maybe Int) Source #

Contains the new AllocatedStorage size for then instance that will be applied or is currently being applied.

pendingModifiedValues_backupRetentionPeriod :: Lens' PendingModifiedValues (Maybe Int) Source #

Specifies the pending number of days for which automated backups are retained.

pendingModifiedValues_cACertificateIdentifier :: Lens' PendingModifiedValues (Maybe Text) Source #

Specifies the identifier of the certificate authority (CA) certificate for the DB instance.

pendingModifiedValues_dbInstanceClass :: Lens' PendingModifiedValues (Maybe Text) Source #

Contains the new DBInstanceClass for the instance that will be applied or is currently being applied.

pendingModifiedValues_dbInstanceIdentifier :: Lens' PendingModifiedValues (Maybe Text) Source #

Contains the new DBInstanceIdentifier for the instance that will be applied or is currently being applied.

pendingModifiedValues_iops :: Lens' PendingModifiedValues (Maybe Int) Source #

Specifies the new Provisioned IOPS value for the instance that will be applied or is currently being applied.

pendingModifiedValues_licenseModel :: Lens' PendingModifiedValues (Maybe Text) Source #

The license model for the instance.

Valid values: license-included, bring-your-own-license, general-public-license

pendingModifiedValues_masterUserPassword :: Lens' PendingModifiedValues (Maybe Text) Source #

Contains the pending or currently in-progress change of the master credentials for the instance.

pendingModifiedValues_multiAZ :: Lens' PendingModifiedValues (Maybe Bool) Source #

Indicates that the Single-AZ instance is to change to a Multi-AZ deployment.

pendingModifiedValues_pendingCloudwatchLogsExports :: Lens' PendingModifiedValues (Maybe PendingCloudwatchLogsExports) Source #

A list of the log types whose configuration is still pending. These log types are in the process of being activated or deactivated.

pendingModifiedValues_port :: Lens' PendingModifiedValues (Maybe Int) Source #

Specifies the pending port for the instance.

pendingModifiedValues_storageType :: Lens' PendingModifiedValues (Maybe Text) Source #

Specifies the storage type to be associated with the instance.

ResourcePendingMaintenanceActions

data ResourcePendingMaintenanceActions Source #

Represents the output of ApplyPendingMaintenanceAction.

See: newResourcePendingMaintenanceActions smart constructor.

Constructors

ResourcePendingMaintenanceActions' 

Fields

Instances

Instances details
FromXML ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

Generic ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

Associated Types

type Rep ResourcePendingMaintenanceActions :: Type -> Type #

Read ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

Show ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

NFData ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

Eq ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

Hashable ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

type Rep ResourcePendingMaintenanceActions Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions

type Rep ResourcePendingMaintenanceActions = D1 ('MetaData "ResourcePendingMaintenanceActions" "Amazonka.DocumentDB.Types.ResourcePendingMaintenanceActions" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "ResourcePendingMaintenanceActions'" 'PrefixI 'True) (S1 ('MetaSel ('Just "pendingMaintenanceActionDetails") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe [PendingMaintenanceAction])) :*: S1 ('MetaSel ('Just "resourceIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newResourcePendingMaintenanceActions :: ResourcePendingMaintenanceActions Source #

Create a value of ResourcePendingMaintenanceActions with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:pendingMaintenanceActionDetails:ResourcePendingMaintenanceActions', resourcePendingMaintenanceActions_pendingMaintenanceActionDetails - A list that provides details about the pending maintenance actions for the resource.

$sel:resourceIdentifier:ResourcePendingMaintenanceActions', resourcePendingMaintenanceActions_resourceIdentifier - The Amazon Resource Name (ARN) of the resource that has pending maintenance actions.

resourcePendingMaintenanceActions_pendingMaintenanceActionDetails :: Lens' ResourcePendingMaintenanceActions (Maybe [PendingMaintenanceAction]) Source #

A list that provides details about the pending maintenance actions for the resource.

resourcePendingMaintenanceActions_resourceIdentifier :: Lens' ResourcePendingMaintenanceActions (Maybe Text) Source #

The Amazon Resource Name (ARN) of the resource that has pending maintenance actions.

Subnet

data Subnet Source #

Detailed information about a subnet.

See: newSubnet smart constructor.

Constructors

Subnet' 

Fields

Instances

Instances details
FromXML Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Generic Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Associated Types

type Rep Subnet :: Type -> Type #

Methods

from :: Subnet -> Rep Subnet x #

to :: Rep Subnet x -> Subnet #

Read Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Show Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

NFData Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Methods

rnf :: Subnet -> () #

Eq Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Methods

(==) :: Subnet -> Subnet -> Bool #

(/=) :: Subnet -> Subnet -> Bool #

Hashable Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

Methods

hashWithSalt :: Int -> Subnet -> Int #

hash :: Subnet -> Int #

type Rep Subnet Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Subnet

type Rep Subnet = D1 ('MetaData "Subnet" "Amazonka.DocumentDB.Types.Subnet" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "Subnet'" 'PrefixI 'True) (S1 ('MetaSel ('Just "subnetAvailabilityZone") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe AvailabilityZone)) :*: (S1 ('MetaSel ('Just "subnetIdentifier") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "subnetStatus") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)))))

newSubnet :: Subnet Source #

Create a value of Subnet with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:subnetAvailabilityZone:Subnet', subnet_subnetAvailabilityZone - Specifies the Availability Zone for the subnet.

$sel:subnetIdentifier:Subnet', subnet_subnetIdentifier - Specifies the identifier of the subnet.

$sel:subnetStatus:Subnet', subnet_subnetStatus - Specifies the status of the subnet.

subnet_subnetAvailabilityZone :: Lens' Subnet (Maybe AvailabilityZone) Source #

Specifies the Availability Zone for the subnet.

subnet_subnetIdentifier :: Lens' Subnet (Maybe Text) Source #

Specifies the identifier of the subnet.

subnet_subnetStatus :: Lens' Subnet (Maybe Text) Source #

Specifies the status of the subnet.

Tag

data Tag Source #

Metadata assigned to an Amazon DocumentDB resource consisting of a key-value pair.

See: newTag smart constructor.

Constructors

Tag' 

Fields

  • key :: Maybe Text

    The required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

  • value :: Maybe Text

    The optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

Instances

Instances details
ToQuery Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

toQuery :: Tag -> QueryString #

FromXML Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

parseXML :: [Node] -> Either String Tag #

Generic Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Associated Types

type Rep Tag :: Type -> Type #

Methods

from :: Tag -> Rep Tag x #

to :: Rep Tag x -> Tag #

Read Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Show Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

showsPrec :: Int -> Tag -> ShowS #

show :: Tag -> String #

showList :: [Tag] -> ShowS #

NFData Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

rnf :: Tag -> () #

Eq Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

(==) :: Tag -> Tag -> Bool #

(/=) :: Tag -> Tag -> Bool #

Hashable Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

Methods

hashWithSalt :: Int -> Tag -> Int #

hash :: Tag -> Int #

type Rep Tag Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.Tag

type Rep Tag = D1 ('MetaData "Tag" "Amazonka.DocumentDB.Types.Tag" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "Tag'" 'PrefixI 'True) (S1 ('MetaSel ('Just "key") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "value") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newTag :: Tag Source #

Create a value of Tag with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:key:Tag', tag_key - The required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

$sel:value:Tag', tag_value - The optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

tag_key :: Lens' Tag (Maybe Text) Source #

The required name of the tag. The string value can be from 1 to 128 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

tag_value :: Lens' Tag (Maybe Text) Source #

The optional value of the tag. The string value can be from 1 to 256 Unicode characters in length and can't be prefixed with "aws:" or "rds:". The string can contain only the set of Unicode letters, digits, white space, '_', '.', '/', '=', '+', '-' (Java regex: "^([\\p{L}\\p{Z}\\p{N}_.:/=+\\-]*)$").

UpgradeTarget

data UpgradeTarget Source #

The version of the database engine that an instance can be upgraded to.

See: newUpgradeTarget smart constructor.

Constructors

UpgradeTarget' 

Fields

Instances

Instances details
FromXML UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

Generic UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

Associated Types

type Rep UpgradeTarget :: Type -> Type #

Read UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

Show UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

NFData UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

Methods

rnf :: UpgradeTarget -> () #

Eq UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

Hashable UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

type Rep UpgradeTarget Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.UpgradeTarget

type Rep UpgradeTarget = D1 ('MetaData "UpgradeTarget" "Amazonka.DocumentDB.Types.UpgradeTarget" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "UpgradeTarget'" 'PrefixI 'True) ((S1 ('MetaSel ('Just "autoUpgrade") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool)) :*: S1 ('MetaSel ('Just "description") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))) :*: (S1 ('MetaSel ('Just "engine") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: (S1 ('MetaSel ('Just "engineVersion") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "isMajorVersionUpgrade") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Bool))))))

newUpgradeTarget :: UpgradeTarget Source #

Create a value of UpgradeTarget with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:autoUpgrade:UpgradeTarget', upgradeTarget_autoUpgrade - A value that indicates whether the target version is applied to any source DB instances that have AutoMinorVersionUpgrade set to true.

$sel:description:UpgradeTarget', upgradeTarget_description - The version of the database engine that an instance can be upgraded to.

$sel:engine:UpgradeTarget', upgradeTarget_engine - The name of the upgrade target database engine.

$sel:engineVersion:UpgradeTarget', upgradeTarget_engineVersion - The version number of the upgrade target database engine.

$sel:isMajorVersionUpgrade:UpgradeTarget', upgradeTarget_isMajorVersionUpgrade - A value that indicates whether a database engine is upgraded to a major version.

upgradeTarget_autoUpgrade :: Lens' UpgradeTarget (Maybe Bool) Source #

A value that indicates whether the target version is applied to any source DB instances that have AutoMinorVersionUpgrade set to true.

upgradeTarget_description :: Lens' UpgradeTarget (Maybe Text) Source #

The version of the database engine that an instance can be upgraded to.

upgradeTarget_engine :: Lens' UpgradeTarget (Maybe Text) Source #

The name of the upgrade target database engine.

upgradeTarget_engineVersion :: Lens' UpgradeTarget (Maybe Text) Source #

The version number of the upgrade target database engine.

upgradeTarget_isMajorVersionUpgrade :: Lens' UpgradeTarget (Maybe Bool) Source #

A value that indicates whether a database engine is upgraded to a major version.

VpcSecurityGroupMembership

data VpcSecurityGroupMembership Source #

Used as a response element for queries on virtual private cloud (VPC) security group membership.

See: newVpcSecurityGroupMembership smart constructor.

Constructors

VpcSecurityGroupMembership' 

Fields

Instances

Instances details
FromXML VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

Generic VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

Associated Types

type Rep VpcSecurityGroupMembership :: Type -> Type #

Read VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

Show VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

NFData VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

Eq VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

Hashable VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

type Rep VpcSecurityGroupMembership Source # 
Instance details

Defined in Amazonka.DocumentDB.Types.VpcSecurityGroupMembership

type Rep VpcSecurityGroupMembership = D1 ('MetaData "VpcSecurityGroupMembership" "Amazonka.DocumentDB.Types.VpcSecurityGroupMembership" "amazonka-docdb-2.0-7OwFe1BulfiBtMsDpDrdzX" 'False) (C1 ('MetaCons "VpcSecurityGroupMembership'" 'PrefixI 'True) (S1 ('MetaSel ('Just "status") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text)) :*: S1 ('MetaSel ('Just "vpcSecurityGroupId") 'NoSourceUnpackedness 'NoSourceStrictness 'DecidedStrict) (Rec0 (Maybe Text))))

newVpcSecurityGroupMembership :: VpcSecurityGroupMembership Source #

Create a value of VpcSecurityGroupMembership with all optional fields omitted.

Use generic-lens or optics to modify other optional fields.

The following record fields are available, with the corresponding lenses provided for backwards compatibility:

$sel:status:VpcSecurityGroupMembership', vpcSecurityGroupMembership_status - The status of the VPC security group.

$sel:vpcSecurityGroupId:VpcSecurityGroupMembership', vpcSecurityGroupMembership_vpcSecurityGroupId - The name of the VPC security group.