fq_zech_poly_init poly ctx

Initialises poly for use, with context ctx, and setting its length to zero. A corresponding call to fq_zech_poly_clear must be made after finishing with the fq_zech_poly_t to free the memory used by the polynomial.

fq_zech_poly_init2 poly alloc ctx

Initialises poly with space for at least alloc coefficients and sets the length to zero. The allocated coefficients are all set to zero. A corresponding call to fq_zech_poly_clear must be made after finishing with the fq_zech_poly_t to free the memory used by the polynomial.

fq_zech_poly_realloc poly alloc ctx

Reallocates the given polynomial to have space for alloc coefficients. If alloc is zero the polynomial is cleared and then reinitialised. If the current length is greater than alloc the polynomial is first truncated to length alloc.

fq_zech_poly_fit_length poly len ctx

If len is greater than the number of coefficients currently allocated, then the polynomial is reallocated to have space for at least len coefficients. No data is lost when calling this function.

The function efficiently deals with the case where fit_length is called many times in small increments by at least doubling the number of allocated coefficients when length is larger than the number of coefficients currently allocated.

_fq_zech_poly_set_length poly newlen ctx

Sets the coefficients of poly beyond len to zero and sets the length of poly to len.

fq_zech_poly_clear poly ctx

Clears the given polynomial, releasing any memory used. It must be reinitialised in order to be used again.

_fq_zech_poly_normalise poly ctx

Sets the length of poly so that the top coefficient is non-zero. If all coefficients are zero, the length is set to zero. This function is mainly used internally, as all functions guarantee normalisation.

_fq_zech_poly_normalise2 poly length ctx

Sets the length length of (poly,length) so that the top coefficient is non-zero. If all coefficients are zero, the length is set to zero. This function is mainly used internally, as all functions guarantee normalisation.

fq_zech_poly_truncate poly newlen ctx

Truncates the polynomial to length at most \(n\).

fq_zech_poly_set_trunc poly1 poly2 newlen ctx

Sets poly1 to poly2 truncated to length \(n\).

_fq_zech_poly_reverse output input len m ctx

Sets output to the reverse of input, which is of length len, but thinking of it as a polynomial of length m, notionally zero-padded if necessary. The length m must be non-negative, but there are no other restrictions. The polynomial output must have space for m coefficients.

fq_zech_poly_reverse output input m ctx

Sets output to the reverse of input, thinking of it as a polynomial of length m, notionally zero-padded if necessary). The length m must be non-negative, but there are no other restrictions. The output polynomial will be set to length m and then normalised.

fq_zech_poly_degree poly ctx

Returns the degree of the polynomial poly.

fq_zech_poly_length poly ctx

Returns the length of the polynomial poly.

fq_zech_poly_lead poly ctx

Returns a pointer to the leading coefficient of poly, or NULL if poly is the zero polynomial.

fq_zech_poly_randtest f state len ctx

Sets \(f\) to a random polynomial of length at most len with entries in the field described by ctx.

fq_zech_poly_randtest_not_zero f state len ctx

Same as fq_zech_poly_randtest but guarantees that the polynomial is not zero.

fq_zech_poly_randtest_monic f state len ctx

Sets \(f\) to a random monic polynomial of length len with entries in the field described by ctx.

fq_zech_poly_randtest_irreducible f state len ctx

Sets \(f\) to a random monic, irreducible polynomial of length len with entries in the field described by ctx.

_fq_zech_poly_set rop op len ctx

Sets (rop, len) to (op, len).

fq_zech_poly_set poly1 poly2 ctx

Sets the polynomial poly1 to the polynomial poly2.

fq_zech_poly_set_fq_zech poly c ctx

Sets the polynomial poly to c.

fq_zech_poly_set_fmpz_mod_poly rop op ctx

Sets the polynomial rop to the polynomial op

fq_zech_poly_set_nmod_poly rop op ctx

Sets the polynomial rop to the polynomial op

fq_zech_poly_swap op1 op2 ctx

Swaps the two polynomials op1 and op2.

_fq_zech_poly_zero rop len ctx

Sets (rop, len) to the zero polynomial.

fq_zech_poly_zero poly ctx

Sets poly to the zero polynomial.

fq_zech_poly_one poly ctx

Sets poly to the constant polynomial \(1\).

fq_zech_poly_gen poly ctx

Sets poly to the polynomial \(x\).

fq_zech_poly_make_monic rop op ctx

Sets rop to op, normed to have leading coefficient 1.

_fq_zech_poly_make_monic rop op length ctx

Sets rop to (op,length), normed to have leading coefficient 1. Assumes that rop has enough space for the polynomial, assumes that op is not zero (and thus has an invertible leading coefficient).

fq_zech_poly_get_coeff x poly n ctx

Sets \(x\) to the coefficient of \(X^n\) in poly.

fq_zech_poly_set_coeff poly n x ctx

Sets the coefficient of \(X^n\) in poly to \(x\).

fq_zech_poly_set_coeff_fmpz poly n x ctx

Sets the coefficient of \(X^n\) in the polynomial to \(x\), assuming \(n \geq 0\).

fq_zech_poly_equal poly1 poly2 ctx

Returns nonzero if the two polynomials poly1 and poly2 are equal, otherwise return zero.

fq_zech_poly_equal_trunc poly1 poly2 n ctx

Notionally truncate poly1 and poly2 to length \(n\) and return nonzero if they are equal, otherwise return zero.

fq_zech_poly_is_zero poly ctx

Returns whether the polynomial poly is the zero polynomial.

fq_zech_poly_is_one op

Returns whether the polynomial poly is equal to the constant polynomial \(1\).

fq_zech_poly_is_gen op ctx

Returns whether the polynomial poly is equal to the polynomial \(x\).

fq_zech_poly_is_unit op ctx

Returns whether the polynomial poly is a unit in the polynomial ring \(\mathbf{F}_q[X]\), i.e. if it has degree \(0\) and is non-zero.

fq_zech_poly_equal_fq_zech poly c ctx

Returns whether the polynomial poly is equal the (constant) \(\mathbf{F}_q\) element c

_fq_zech_poly_add res poly1 len1 poly2 len2 ctx

Sets res to the sum of (poly1,len1) and (poly2,len2).

fq_zech_poly_add res poly1 poly2 ctx

Sets res to the sum of poly1 and poly2.

fq_zech_poly_add_si res poly1 c ctx

Sets res to the sum of poly1 and c.

fq_zech_poly_add_series res poly1 poly2 n ctx

Notionally truncate poly1 and poly2 to length n and set res to the sum.

_fq_zech_poly_sub res poly1 len1 poly2 len2 ctx

Sets res to the difference of (poly1,len1) and (poly2,len2).

fq_zech_poly_sub res poly1 poly2 ctx

Sets res to the difference of poly1 and poly2.

fq_zech_poly_sub_series res poly1 poly2 n ctx

Notionally truncate poly1 and poly2 to length n and set res to the difference.

_fq_zech_poly_neg rop op len ctx

Sets rop to the additive inverse of (op,len).

fq_zech_poly_neg res poly ctx

Sets res to the additive inverse of poly.

_fq_zech_poly_scalar_mul_fq_zech rop op len x ctx

Sets (rop,len) to the product of (op,len) by the scalar x, in the context defined by ctx.

fq_zech_poly_scalar_mul_fq_zech rop op x ctx

Sets rop to the product of op by the scalar x, in the context defined by ctx.

_fq_zech_poly_scalar_addmul_fq_zech rop op len x ctx

Adds to (rop,len) the product of (op,len) by the scalar x, in the context defined by ctx. In particular, assumes the same length for op and rop.

fq_zech_poly_scalar_addmul_fq_zech rop op x ctx

Adds to rop the product of op by the scalar x, in the context defined by ctx.

_fq_zech_poly_scalar_submul_fq_zech rop op len x ctx

Subtracts from (rop,len) the product of (op,len) by the scalar x, in the context defined by ctx. In particular, assumes the same length for op and rop.

fq_zech_poly_scalar_submul_fq_zech rop op x ctx

Subtracts from rop the product of op by the scalar x, in the context defined by ctx.

_fq_zech_poly_mul_classical rop op1 len1 op2 len2 ctx

Sets (rop, len1 + len2 - 1) to the product of (op1, len1) and (op2, len2), assuming that len1 is at least len2 and neither is zero.

Permits zero padding. Does not support aliasing of rop with either op1 or op2.

fq_zech_poly_mul_classical rop op1 op2 ctx

Sets rop to the product of op1 and op2 using classical polynomial multiplication.

_fq_zech_poly_mul_KS rop op1 len1 op2 len2 ctx

Sets (rop, len1 + len2 - 1) to the product of (op1, len1) and (op2, len2).

Permits zero padding and places no assumptions on the lengths len1 and len2. Supports aliasing.

fq_zech_poly_mul_KS rop op1 op2 ctx

Sets rop to the product of op1 and op2 using Kronecker substitution, that is, by encoding each coefficient in \(\mathbf{F}_{q}\) as an integer and reducing this problem to multiplying two polynomials over the integers.

_fq_zech_poly_mul rop op1 len1 op2 len2 ctx

Sets (rop, len1 + len2 - 1) to the product of (op1, len1) and (op2, len2), choosing an appropriate algorithm.

Permits zero padding. Does not support aliasing.

fq_zech_poly_mul rop op1 op2 ctx

Sets rop to the product of op1 and op2, choosing an appropriate algorithm.

_fq_zech_poly_mullow_classical rop op1 len1 op2 len2 n ctx

Sets (rop, n) to the first \(n\) coefficients of (op1, len1) multiplied by (op2, len2).

Assumes 0 < n <= len1 + len2 - 1. Assumes neither len1 nor len2 is zero.

fq_zech_poly_mullow_classical rop op1 op2 n ctx

Sets rop to the product of op1 and op2, computed using the classical or schoolbook method.

_fq_zech_poly_mullow_KS rop op1 len1 op2 len2 n ctx

Sets (rop, n) to the lowest \(n\) coefficients of the product of (op1, len1) and (op2, len2).

Assumes that len1 and len2 are positive, but does allow for the polynomials to be zero-padded. The polynomials may be zero, too. Assumes \(n\) is positive. Supports aliasing between rop, op1 and op2.

fq_zech_poly_mullow_KS rop op1 op2 n ctx

Sets rop to the product of op1 and op2.

_fq_zech_poly_mullow rop op1 len1 op2 len2 n ctx

Sets (rop, n) to the lowest \(n\) coefficients of the product of (op1, len1) and (op2, len2).

Assumes 0 < n <= len1 + len2 - 1. Allows for zero-padding in the inputs. Does not support aliasing between the inputs and the output.

fq_zech_poly_mullow rop op1 op2 n ctx

Sets rop to the lowest \(n\) coefficients of the product of op1 and op2.

_fq_zech_poly_mulhigh_classical res poly1 len1 poly2 len2 start ctx

Computes the product of (poly1, len1) and (poly2, len2) and writes the coefficients from start onwards into the high coefficients of res, the remaining coefficients being arbitrary but reduced. Assumes that len1 >= len2 > 0. Aliasing of inputs and output is not permitted. Algorithm is classical multiplication.

fq_zech_poly_mulhigh_classical res poly1 poly2 start ctx

Computes the product of poly1 and poly2 and writes the coefficients from start onwards into the high coefficients of res, the remaining coefficients being arbitrary but reduced. Algorithm is classical multiplication.

_fq_zech_poly_mulhigh res poly1 len1 poly2 len2 start ctx

Computes the product of (poly1, len1) and (poly2, len2) and writes the coefficients from start onwards into the high coefficients of res, the remaining coefficients being arbitrary but reduced. Assumes that len1 >= len2 > 0. Aliasing of inputs and output is not permitted.

fq_zech_poly_mulhigh res poly1 poly2 start ctx

Computes the product of poly1 and poly2 and writes the coefficients from start onwards into the high coefficients of res, the remaining coefficients being arbitrary but reduced.

_fq_zech_poly_mulmod res poly1 len1 poly2 len2 f lenf ctx

Sets res to the remainder of the product of poly1 and poly2 upon polynomial division by f.

It is required that len1 + len2 - lenf > 0, which is equivalent to requiring that the result will actually be reduced. Otherwise, simply use _fq_zech_poly_mul instead.

Aliasing of f and res is not permitted.

fq_zech_poly_mulmod res poly1 poly2 f ctx

Sets res to the remainder of the product of poly1 and poly2 upon polynomial division by f.

_fq_zech_poly_mulmod_preinv res poly1 len1 poly2 len2 f lenf finv lenfinv ctx

Sets res to the remainder of the product of poly1 and poly2 upon polynomial division by f.

It is required that finv is the inverse of the reverse of f mod x^lenf.

Aliasing of res with any of the inputs is not permitted.

fq_zech_poly_mulmod_preinv res poly1 poly2 f finv ctx

Sets res to the remainder of the product of poly1 and poly2 upon polynomial division by f. finv is the inverse of the reverse of f.

_fq_zech_poly_sqr_classical rop op len ctx

Sets (rop, 2*len - 1) to the square of (op, len), assuming that (op,len) is not zero and using classical polynomial multiplication.

Permits zero padding. Does not support aliasing of rop with either op1 or op2.

fq_zech_poly_sqr_classical rop op ctx

Sets rop to the square of op using classical polynomial multiplication.

_fq_zech_poly_sqr_KS rop op len ctx

Sets (rop, 2*len - 1) to the square of (op, len).

Permits zero padding and places no assumptions on the lengths len1 and len2. Supports aliasing.

fq_zech_poly_sqr_KS rop op ctx

Sets rop to the square op using Kronecker substitution, that is, by encoding each coefficient in \(\mathbf{F}_{q}\) as an integer and reducing this problem to multiplying two polynomials over the integers.

_fq_zech_poly_sqr rop op len ctx

Sets (rop, 2* len - 1) to the square of (op, len), choosing an appropriate algorithm.

Permits zero padding. Does not support aliasing.

fq_zech_poly_sqr rop op ctx

Sets rop to the square of op, choosing an appropriate algorithm.

_fq_zech_poly_pow rop op len e ctx

Sets rop = op^e, assuming that e, len > 0 and that res has space for e*(len - 1) + 1 coefficients. Does not support aliasing.

fq_zech_poly_pow rop op e ctx

Computes rop = op^e. If \(e\) is zero, returns one, so that in particular 0^0 = 1.

_fq_zech_poly_powmod_ui_binexp res poly e f lenf ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e > 0.

We require lenf > 1. It is assumed that poly is already reduced modulo f and zero-padded as necessary to have length exactly lenf - 1. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_ui_binexp res poly e f ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e >= 0.

_fq_zech_poly_powmod_ui_binexp_preinv res poly e f lenf finv lenfinv ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e > 0. We require finv to be the inverse of the reverse of f.

We require lenf > 1. It is assumed that poly is already reduced modulo f and zero-padded as necessary to have length exactly lenf - 1. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_ui_binexp_preinv res poly e f finv ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e >= 0. We require finv to be the inverse of the reverse of f.

_fq_zech_poly_powmod_fmpz_binexp res poly e f lenf ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e > 0.

We require lenf > 1. It is assumed that poly is already reduced modulo f and zero-padded as necessary to have length exactly lenf - 1. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_fmpz_binexp res poly e f ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e >= 0.

_fq_zech_poly_powmod_fmpz_binexp_preinv res poly e f lenf finv lenfinv ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e > 0. We require finv to be the inverse of the reverse of f.

We require lenf > 1. It is assumed that poly is already reduced modulo f and zero-padded as necessary to have length exactly lenf - 1. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_fmpz_binexp_preinv res poly e f finv ctx

Sets res to poly raised to the power e modulo f, using binary exponentiation. We require e >= 0. We require finv to be the inverse of the reverse of f.

_fq_zech_poly_powmod_fmpz_sliding_preinv res poly e k f lenf finv lenfinv ctx

Sets res to poly raised to the power e modulo f, using sliding-window exponentiation with window size k. We require e > 0. We require finv to be the inverse of the reverse of f. If k is set to zero, then an "optimum" size will be selected automatically base on e.

We require lenf > 1. It is assumed that poly is already reduced modulo f and zero-padded as necessary to have length exactly lenf - 1. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_fmpz_sliding_preinv res poly e k f finv ctx

Sets res to poly raised to the power e modulo f, using sliding-window exponentiation with window size k. We require e >= 0. We require finv to be the inverse of the reverse of f. If k is set to zero, then an "optimum" size will be selected automatically base on e.

_fq_zech_poly_powmod_x_fmpz_preinv res e f lenf finv lenfinv ctx

Sets res to x raised to the power e modulo f, using sliding window exponentiation. We require e > 0. We require finv to be the inverse of the reverse of f.

We require lenf > 2. The output res must have room for lenf - 1 coefficients.

fq_zech_poly_powmod_x_fmpz_preinv res e f finv ctx

Sets res to x raised to the power e modulo f, using sliding window exponentiation. We require e >= 0. We require finv to be the inverse of the reverse of f.

_fq_zech_poly_pow_trunc_binexp res poly e trunc ctx

Sets res to the low trunc coefficients of poly (assumed to be zero padded if necessary to length trunc) to the power e. This is equivalent to doing a powering followed by a truncation. We require that res has enough space for trunc coefficients, that trunc > 0 and that e > 1. Aliasing is not permitted. Uses the binary exponentiation method.

fq_zech_poly_pow_trunc_binexp res poly e trunc ctx

Sets res to the low trunc coefficients of poly to the power e. This is equivalent to doing a powering followed by a truncation. Uses the binary exponentiation method.

_fq_zech_poly_pow_trunc res poly e trunc mod

Sets res to the low trunc coefficients of poly (assumed to be zero padded if necessary to length trunc) to the power e. This is equivalent to doing a powering followed by a truncation. We require that res has enough space for trunc coefficients, that trunc > 0 and that e > 1. Aliasing is not permitted.

fq_zech_poly_pow_trunc res poly e trunc ctx

Sets res to the low trunc coefficients of poly to the power e. This is equivalent to doing a powering followed by a truncation.

_fq_zech_poly_shift_left rop op len n ctx

Sets (rop, len + n) to (op, len) shifted left by \(n\) coefficients.

Inserts zero coefficients at the lower end. Assumes that len and \(n\) are positive, and that rop fits len + n elements. Supports aliasing between rop and op.

fq_zech_poly_shift_left rop op n ctx

Sets rop to op shifted left by \(n\) coeffs. Zero coefficients are inserted.

_fq_zech_poly_shift_right rop op len n ctx

Sets (rop, len - n) to (op, len) shifted right by \(n\) coefficients.

Assumes that len and \(n\) are positive, that len > n, and that rop fits len - n elements. Supports aliasing between rop and op, although in this case the top coefficients of op are not set to zero.

fq_zech_poly_shift_right rop op n ctx

Sets rop to op shifted right by \(n\) coefficients. If \(n\) is equal to or greater than the current length of op, rop is set to the zero polynomial.

_fq_zech_poly_hamming_weight op len ctx

Returns the number of non-zero entries in (op, len).

fq_zech_poly_hamming_weight op ctx

Returns the number of non-zero entries in the polynomial op.

_fq_zech_poly_divrem Q R A lenA B lenB invB ctx

Computes (Q, lenA - lenB + 1), (R, lenA) such that \(A = B Q + R\) with \(0 \leq \operatorname{len}(R) < \operatorname{len}(B)\).

Assumes that the leading coefficient of \(B\) is invertible and that invB is its inverse.

Assumes that \(\operatorname{len}(A), \operatorname{len}(B) > 0\). Allows zero-padding in (A, lenA). \(R\) and \(A\) may be aliased, but apart from this no aliasing of input and output operands is allowed.

fq_zech_poly_divrem Q R A B ctx

Computes \(Q\), \(R\) such that \(A = B Q + R\) with \(0 \leq \operatorname{len}(R) < \operatorname{len}(B)\).

Assumes that the leading coefficient of \(B\) is invertible. This can be taken for granted the context is for a finite field, that is, when \(p\) is prime and \(f(X)\) is irreducible.

fq_zech_poly_divrem_f f Q R A B ctx

Either finds a non-trivial factor \(f\) of the modulus of ctx, or computes \(Q\), \(R\) such that \(A = B Q + R\) and \(0 \leq \operatorname{len}(R) < \operatorname{len}(B)\).

If the leading coefficient of \(B\) is invertible, the division with remainder operation is carried out, \(Q\) and \(R\) are computed correctly, and \(f\) is set to \(1\). Otherwise, \(f\) is set to a non-trivial factor of the modulus and \(Q\) and \(R\) are not touched.

Assumes that \(B\) is non-zero.

_fq_zech_poly_rem R A lenA B lenB invB ctx

Sets R to the remainder of the division of (A,lenA) by (B,lenB). Assumes that the leading coefficient of (B,lenB) is invertible and that invB is its inverse.

fq_zech_poly_rem R A B ctx

Sets R to the remainder of the division of A by B in the context described by ctx.

_fq_zech_poly_div Q A lenA B lenB invB ctx

Notationally, computes \(Q\), \(R\) such that \(A = B Q + R\) with (0 leq operatorname{len}(R) < operatorname{len}(B)) but only sets (Q, lenA - lenB + 1).

Allows zero-padding in \(A\) but not in \(B\). Assumes that the leading coefficient of \(B\) is a unit.

fq_zech_poly_div Q A B ctx

Notionally finds polynomials \(Q\) and \(R\) such that \(A = B Q + R\) with \(\operatorname{len}(R) < \operatorname{len}(B)\), but returns only Q. If \(\operatorname{len}(B) = 0\) an exception is raised.

_fq_zech_poly_div_newton_n_preinv Q A lenA B lenB Binv lenBinv ctx_t

Notionally computes polynomials \(Q\) and \(R\) such that \(A = BQ + R\) with \(\operatorname{len}(R)\) less than lenB, where A is of length lenA and B is of length lenB, but return only \(Q\).

We require that \(Q\) have space for lenA - lenB + 1 coefficients and assume that the leading coefficient of \(B\) is a unit. Furthermore, we assume that \(Binv\) is the inverse of the reverse of \(B\) mod \(x^{\operatorname{len}(B)}\).

The algorithm used is to reverse the polynomials and divide the resulting power series, then reverse the result.

fq_zech_poly_div_newton_n_preinv Q A B Binv ctx

Notionally computes \(Q\) and \(R\) such that \(A = BQ + R\) with \(\operatorname{len}(R) < \operatorname{len}(B)\), but returns only \(Q\).

We assume that the leading coefficient of \(B\) is a unit and that \(Binv\) is the inverse of the reverse of \(B\) mod \(x^{\operatorname{len}(B)}\).

It is required that the length of \(A\) is less than or equal to 2*the length of \(B\) - 2.

The algorithm used is to reverse the polynomials and divide the resulting power series, then reverse the result.

_fq_zech_poly_divrem_newton_n_preinv Q R A lenA B lenB Binv lenBinv ctx

Computes \(Q\) and \(R\) such that \(A = BQ + R\) with \(\operatorname{len}(R)\) less than lenB, where \(A\) is of length lenA and \(B\) is of length lenB. We require that \(Q\) have space for lenA - lenB + 1 coefficients. Furthermore, we assume that \(Binv\) is the inverse of the reverse of \(B\) mod \(x^{\operatorname{len}(B)}\). The algorithm used is to call div_newton_preinv and then multiply out and compute the remainder.

fq_zech_poly_divrem_newton_n_preinv Q R A B Binv ctx

Computes \(Q\) and \(R\) such that \(A = BQ + R\) with (operatorname{len}(R) < operatorname{len}(B)). We assume \(Binv\) is the inverse of the reverse of \(B\) mod \(x^{\operatorname{len}(B)}\).

It is required that the length of \(A\) is less than or equal to 2*the length of \(B\) - 2.

The algorithm used is to call div_newton and then multiply out and compute the remainder.

_fq_zech_poly_inv_series_newton Qinv Q n ctx

Given Q of length n whose constant coefficient is invertible modulo the given modulus, find a polynomial Qinv of length n such that Q * Qinv is 1 modulo \(x^n\). Requires n > 0. This function can be viewed as inverting a power series via Newton iteration.

fq_zech_poly_inv_series_newton Qinv Q n ctx

Given Q find Qinv such that Q * Qinv is 1 modulo \(x^n\). The constant coefficient of Q must be invertible modulo the modulus of Q. An exception is raised if this is not the case or if n = 0. This function can be viewed as inverting a power series via Newton iteration.

_fq_zech_poly_inv_series Qinv Q n ctx

Given Q of length n whose constant coefficient is invertible modulo the given modulus, find a polynomial Qinv of length n such that Q * Qinv is 1 modulo \(x^n\). Requires n > 0.

fq_zech_poly_inv_series Qinv Q n ctx

Given Q find Qinv such that Q * Qinv is 1 modulo \(x^n\). The constant coefficient of Q must be invertible modulo the modulus of Q. An exception is raised if this is not the case or if n = 0.

_fq_zech_poly_div_series Q A Alen B Blen n ctx

Set (Q, n) to the quotient of the series (A, Alen) and (B, Blen) assuming Alen, Blen <= n. We assume the bottom coefficient of B is invertible.

fq_zech_poly_div_series Q A B n ctx

Set \(Q\) to the quotient of the series \(A\) by \(B\), thinking of the series as though they were of length \(n\). We assume that the bottom coefficient of \(B\) is invertible.

fq_zech_poly_gcd rop op1 op2 ctx

Sets rop to the greatest common divisor of op1 and op2, using the either the Euclidean or HGCD algorithm. The GCD of zero polynomials is defined to be zero, whereas the GCD of the zero polynomial and some other polynomial \(P\) is defined to be \(P\). Except in the case where the GCD is zero, the GCD \(G\) is made monic.

_fq_zech_poly_gcd G A lenA B lenB ctx

Computes the GCD of \(A\) of length lenA and \(B\) of length lenB, where lenA >= lenB > 0 and sets \(G\) to it. The length of the GCD \(G\) is returned by the function. No attempt is made to make the GCD monic. It is required that \(G\) have space for lenB coefficients.

_fq_zech_poly_gcd_euclidean_f f G A lenA B lenB ctx

Either sets \(f = 1\) and \(G\) to the greatest common divisor of \((A,\operatorname{len}(A))\) and \((B, \operatorname{len}(B))\) and returns its length, or sets \(f\) to a non-trivial factor of the modulus of ctx and leaves the contents of the vector \((G, lenB)\) undefined.

Assumes that \(\operatorname{len}(A) \geq \operatorname{len}(B) > 0\) and that the vector \(G\) has space for sufficiently many coefficients.

fq_zech_poly_gcd_euclidean_f f G A B ctx

Either sets \(f = 1\) and \(G\) to the greatest common divisor of \(A\) and \(B\) or sets \(f\) to a factor of the modulus of ctx.

_fq_zech_poly_xgcd G S T A lenA B lenB invB ctx

Computes the GCD of \(A\) and \(B\) together with cofactors \(S\) and \(T\) such that \(S A + T B = G\). Returns the length of \(G\).

Assumes that \(\operatorname{len}(A) \geq \operatorname{len}(B) \geq 1\) and \((\operatorname{len}(A),\operatorname{len}(B)) \neq (1,1)\).

No attempt is made to make the GCD monic.

Requires that \(G\) have space for \(\operatorname{len}(B)\) coefficients. Writes \(\operatorname{len}(B)-1\) and \(\operatorname{len}(A)-1\) coefficients to \(S\) and \(T\), respectively. Note that, in fact, \(\operatorname{len}(S) \leq \max(\operatorname{len}(B) - \operatorname{len}(G), 1)\) and \(\operatorname{len}(T) \leq \max(\operatorname{len}(A) - \operatorname{len}(G), 1)\).

No aliasing of input and output operands is permitted.

fq_zech_poly_xgcd G S T A B ctx

Computes the GCD of \(A\) and \(B\). The GCD of zero polynomials is defined to be zero, whereas the GCD of the zero polynomial and some other polynomial \(P\) is defined to be \(P\). Except in the case where the GCD is zero, the GCD \(G\) is made monic.

Polynomials S and T are computed such that S*A + T*B = G. The length of S will be at most lenB and the length of T will be at most lenA.

_fq_zech_poly_xgcd_euclidean_f f G S T A lenA B lenB invB ctx

Either sets \(f = 1\) and computes the GCD of \(A\) and \(B\) together with cofactors \(S\) and \(T\) such that \(S A + T B = G\); otherwise, sets \(f\) to a non-trivial factor of the modulus of ctx and leaves \(G\), \(S\), and \(T\) undefined. Returns the length of \(G\).

Assumes that \(\operatorname{len}(A) \geq \operatorname{len}(B) \geq 1\) and \((\operatorname{len}(A),\operatorname{len}(B)) \neq (1,1)\).

No attempt is made to make the GCD monic.

Requires that \(G\) have space for \(\operatorname{len}(B)\) coefficients. Writes \(\operatorname{len}(B)-1\) and \(\operatorname{len}(A)-1\) coefficients to \(S\) and \(T\), respectively. Note that, in fact, \(\operatorname{len}(S) \leq \max(\operatorname{len}(B) - \operatorname{len}(G), 1)\) and \(\operatorname{len}(T) \leq \max(\operatorname{len}(A) - \operatorname{len}(G), 1)\).

No aliasing of input and output operands is permitted.

fq_zech_poly_xgcd_euclidean_f f G S T A B ctx

Either sets \(f = 1\) and computes the GCD of \(A\) and \(B\) or sets \(f\) to a non-trivial factor of the modulus of ctx.

If the GCD is computed, polynomials S and T are computed such that S*A + T*B = G; otherwise, they are undefined. The length of S will be at most lenB and the length of T will be at most lenA.

The GCD of zero polynomials is defined to be zero, whereas the GCD of the zero polynomial and some other polynomial \(P\) is defined to be \(P\). Except in the case where the GCD is zero, the GCD \(G\) is made monic.

_fq_zech_poly_divides Q A lenA B lenB invB ctx

Returns \(1\) if (B, lenB) divides (A, lenA) exactly and sets \(Q\) to the quotient, otherwise returns \(0\).

It is assumed that \(\operatorname{len}(A) \geq \operatorname{len}(B) > 0\) and that \(Q\) has space for \(\operatorname{len}(A) - \operatorname{len}(B) + 1\) coefficients.

Aliasing of \(Q\) with either of the inputs is not permitted.

This function is currently unoptimised and provided for convenience only.

fq_zech_poly_divides Q A B ctx

Returns \(1\) if \(B\) divides \(A\) exactly and sets \(Q\) to the quotient, otherwise returns \(0\).

This function is currently unoptimised and provided for convenience only.

_fq_zech_poly_derivative rop op len ctx

Sets (rop, len - 1) to the derivative of (op, len). Also handles the cases where len is \(0\) or \(1\) correctly. Supports aliasing of rop and op.

fq_zech_poly_derivative rop op ctx

Sets rop to the derivative of op.

_fq_zech_poly_invsqrt_series g h n mod

Set the first \(n\) terms of \(g\) to the series expansion of \(1/\sqrt{h}\). It is assumed that \(n > 0\), that \(h\) has constant term 1 and that \(h\) is zero-padded as necessary to length \(n\). Aliasing is not permitted.

fq_zech_poly_invsqrt_series g h n ctx

Set \(g\) to the series expansion of \(1/\sqrt{h}\) to order \(O(x^n)\). It is assumed that \(h\) has constant term 1.

_fq_zech_poly_sqrt_series g h n ctx

Set the first \(n\) terms of \(g\) to the series expansion of \(\sqrt{h}\). It is assumed that \(n > 0\), that \(h\) has constant term 1 and that \(h\) is zero-padded as necessary to length \(n\). Aliasing is not permitted.

fq_zech_poly_sqrt_series g h n ctx

Set \(g\) to the series expansion of \(\sqrt{h}\) to order \(O(x^n)\). It is assumed that \(h\) has constant term 1.

_fq_zech_poly_sqrt s p n mod

If (p, n) is a perfect square, sets (s, n / 2 + 1) to a square root of \(p\) and returns 1. Otherwise returns 0.

fq_zech_poly_sqrt s p mod

If \(p\) is a perfect square, sets \(s\) to a square root of \(p\) and returns 1. Otherwise returns 0.

_fq_zech_poly_evaluate_fq_zech rop op len a ctx

Sets rop to (op, len) evaluated at \(a\).

Supports zero padding. There are no restrictions on len, that is, len is allowed to be zero, too.

fq_zech_poly_evaluate_fq_zech rop f a ctx

Sets rop to the value of \(f(a)\).

As the coefficient ring \(\mathbf{F}_q\) is finite, Horner's method is sufficient.

_fq_zech_poly_compose rop op1 len1 op2 len2 ctx

Sets rop to the composition of (op1, len1) and (op2, len2).

Assumes that rop has space for (len1-1)*(len2-1) + 1 coefficients. Assumes that op1 and op2 are non-zero polynomials. Does not support aliasing between any of the inputs and the output.

fq_zech_poly_compose rop op1 op2 ctx

Sets rop to the composition of op1 and op2. To be precise about the order of composition, denoting rop, op1, and op2 by \(f\), \(g\), and \(h\), respectively, sets \(f(t) = g(h(t))\).

_fq_zech_poly_compose_mod_horner res f lenf g h lenh ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). The output is not allowed to be aliased with any of the inputs.

The algorithm used is Horner's rule.

fq_zech_poly_compose_mod_horner res f g h ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero. The algorithm used is Horner's rule.

_fq_zech_poly_compose_mod_horner_preinv res f lenf g h lenh hinv lenhiv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). We also require that the length of \(f\) is less than the length of \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The output is not allowed to be aliased with any of the inputs.

The algorithm used is Horner's rule.

fq_zech_poly_compose_mod_horner_preinv res f g h hinv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that \(f\) has smaller degree than \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The algorithm used is Horner's rule.

_fq_zech_poly_compose_mod_brent_kung res f lenf g h lenh ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). We also require that the length of \(f\) is less than the length of \(h\). The output is not allowed to be aliased with any of the inputs.

The algorithm used is the Brent-Kung matrix algorithm.

fq_zech_poly_compose_mod_brent_kung res f g h ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that \(f\) has smaller degree than \(h\). The algorithm used is the Brent-Kung matrix algorithm.

_fq_zech_poly_compose_mod_brent_kung_preinv res f lenf g h lenh hinv lenhiv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). We also require that the length of \(f\) is less than the length of \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The output is not allowed to be aliased with any of the inputs.

The algorithm used is the Brent-Kung matrix algorithm.

fq_zech_poly_compose_mod_brent_kung_preinv res f g h hinv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that \(f\) has smaller degree than \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The algorithm used is the Brent-Kung matrix algorithm.

_fq_zech_poly_compose_mod res f lenf g h lenh ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). The output is not allowed to be aliased with any of the inputs.

fq_zech_poly_compose_mod res f g h ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero.

_fq_zech_poly_compose_mod_preinv res f lenf g h lenh hinv lenhiv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that the length of \(g\) is one less than the length of \(h\) (possibly with zero padding). We also require that the length of \(f\) is less than the length of \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The output is not allowed to be aliased with any of the inputs.

fq_zech_poly_compose_mod_preinv res f g h hinv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero and that \(f\) has smaller degree than \(h\). Furthermore, we require hinv to be the inverse of the reverse of h.

_fq_zech_poly_reduce_matrix_mod_poly A B f ctx

Sets the ith row of A to the reduction of the ith row of \(B\) modulo \(f\) for \(i=1,\ldots,\sqrt{\deg(f)}\). We require \(B\) to be at least a \(\sqrt{\deg(f)}\times \deg(f)\) matrix and \(f\) to be nonzero.

_fq_zech_poly_precompute_matrix A f g leng ginv lenginv ctx

Sets the ith row of A to \(f^i\) modulo \(g\) for \(i=1,\ldots,\sqrt{\deg(g)}\). We require \(A\) to be a \(\sqrt{\deg(g)}\times \deg(g)\) matrix. We require ginv to be the inverse of the reverse of g and \(g\) to be nonzero.

fq_zech_poly_precompute_matrix A f g ginv ctx

Sets the ith row of A to \(f^i\) modulo \(g\) for \(i=1,\ldots,\sqrt{\deg(g)}\). We require \(A\) to be a \(\sqrt{\deg(g)}\times \deg(g)\) matrix. We require ginv to be the inverse of the reverse of g.

_fq_zech_poly_compose_mod_brent_kung_precomp_preinv res f lenf A h lenh hinv lenhinv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that \(h\) is nonzero. We require that the ith row of \(A\) contains \(g^i\) for \(i=1,\ldots,\sqrt{\deg(h)}\), i.e. \(A\) is a \(\sqrt{\deg(h)}\times \deg(h)\) matrix. We also require that the length of \(f\) is less than the length of \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. The output is not allowed to be aliased with any of the inputs.

The algorithm used is the Brent-Kung matrix algorithm.

fq_zech_poly_compose_mod_brent_kung_precomp_preinv res f A h hinv ctx

Sets res to the composition \(f(g)\) modulo \(h\). We require that the ith row of \(A\) contains \(g^i\) for \(i=1,\ldots,\sqrt{\deg(h)}\), i.e. \(A\) is a (sqrt{deg(h)}times deg(h)) matrix. We require that \(h\) is nonzero and that \(f\) has smaller degree than \(h\). Furthermore, we require hinv to be the inverse of the reverse of h. This version of Brent-Kung modular composition is particularly useful if one has to perform several modular composition of the form \(f(g)\) modulo \(h\) for fixed \(g\) and \(h\).

_fq_zech_poly_fprint_pretty file poly len x ctx

Prints the pretty representation of (poly, len) to the stream file, using the string x to represent the indeterminate.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

fq_zech_poly_fprint_pretty file poly x ctx

Prints the pretty representation of poly to the stream file, using the string x to represent the indeterminate.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

_fq_zech_poly_print_pretty poly len x ctx

Prints the pretty representation of (poly, len) to stdout, using the string x to represent the indeterminate.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

fq_zech_poly_print_pretty poly x ctx

Prints the pretty representation of poly to stdout, using the string x to represent the indeterminate.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

_fq_zech_poly_fprint file poly len ctx

Prints the pretty representation of (poly, len) to the stream file.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

fq_zech_poly_fprint file poly ctx

Prints the pretty representation of poly to the stream file.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

_fq_zech_poly_print poly len ctx

Prints the pretty representation of (poly, len) to stdout.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

fq_zech_poly_print poly ctx

Prints the representation of poly to stdout.

In case of success, returns a positive value. In case of failure, returns a non-positive value.

_fq_zech_poly_get_str poly len ctx

Returns the plain FLINT string representation of the polynomial (poly, len).

fq_zech_poly_get_str poly ctx

Returns the plain FLINT string representation of the polynomial poly.

_fq_zech_poly_get_str_pretty poly len x ctx

Returns a pretty representation of the polynomial (poly, len) using the null-terminated string x as the variable name.

fq_zech_poly_get_str_pretty poly x ctx

Returns a pretty representation of the polynomial poly using the null-terminated string x as the variable name

fq_zech_poly_inflate result input inflation ctx

Sets result to the inflated polynomial \(p(x^n)\) where \(p\) is given by input and \(n\) is given by inflation.

fq_zech_poly_deflate result input deflation ctx

Sets result to the deflated polynomial \(p(x^{1/n})\) where \(p\) is given by input and \(n\) is given by deflation. Requires \(n > 0\).

fq_zech_poly_deflation input ctx

Returns the largest integer by which input can be deflated. As special cases, returns 0 if input is the zero polynomial and 1 of input is a constant polynomial.