-- | -- Module : Data.ByteString.Lazy.Search -- Copyright : Daniel Fischer -- Chris Kuklewicz -- Licence : BSD3 -- Maintainer : Daniel Fischer <daniel.is.fischer@googlemail.com> -- Stability : Provisional -- Portability : non-portable (BangPatterns) -- -- Fast overlapping Boyer-Moore search of lazy -- 'L.ByteString' values. Breaking, splitting and replacing -- using the Boyer-Moore algorithm. -- -- Descriptions of the algorithm can be found at -- <http://www-igm.univ-mlv.fr/~lecroq/string/node14.html#SECTION00140> -- and -- <http://en.wikipedia.org/wiki/Boyer-Moore_string_search_algorithm> -- -- Original authors: Daniel Fischer (daniel.is.fischer at googlemail.com) and -- Chris Kuklewicz (haskell at list.mightyreason.com). module Data.ByteString.Lazy.Search( -- * Overview -- $overview -- ** Performance -- $performance -- ** Caution -- $caution -- ** Complexity -- $complexity -- ** Partial application -- $partial -- ** Integer overflow -- $overflow -- * Finding substrings indices , nonOverlappingIndices -- * Breaking on substrings , breakOn , breakAfter , breakFindAfter -- * Replacing , replace -- * Splitting , split , splitKeepEnd , splitKeepFront -- * Convenience , strictify ) where import qualified Data.ByteString.Lazy.Search.Internal.BoyerMoore as BM import Data.ByteString.Search.Substitution import qualified Data.ByteString as S import qualified Data.ByteString.Lazy as L import Data.Int (Int64) -- $overview -- -- This module provides functions related to searching a substring within -- a string, using the Boyer-Moore algorithm with minor modifications -- to improve the overall performance and ameliorate the worst case -- performance degradation of the original Boyer-Moore algorithm for -- periodic patterns. -- -- Efficiency demands that the pattern be a strict 'S.ByteString', -- to work with a lazy pattern, convert it to a strict 'S.ByteString' -- first via 'strictify' (provided it is not too long). -- If support for long lazy patterns is needed, mail a feature-request. -- -- When searching a pattern in a UTF-8-encoded 'S.ByteString', be aware that -- these functions work on bytes, not characters, so the indices are -- byte-offsets, not character offsets. -- $performance -- -- In general, the Boyer-Moore algorithm is the most efficient method to -- search for a pattern inside a string. The advantage over other algorithms -- (e.g. Naïve, Knuth-Morris-Pratt, Horspool, Sunday) can be made -- arbitrarily large for specially selected patterns and targets, but -- usually, it's a factor of 2–3 versus Knuth-Morris-Pratt and of -- 6–10 versus the naïve algorithm. The Horspool and Sunday -- algorithms, which are simplified variants of the Boyer-Moore algorithm, -- typically have performance between Boyer-Moore and Knuth-Morris-Pratt, -- mostly closer to Boyer-Moore. The advantage of the Boyer-moore variants -- over other algorithms generally becomes larger for longer patterns. For -- very short patterns (or patterns with a very short period), other -- algorithms, e.g. "Data.ByteString.Lazy.Search.DFA" can be faster (my -- tests suggest that \"very short\" means two, maybe three bytes). -- -- In general, searching in a strict 'S.ByteString' is slightly faster -- than searching in a lazy 'L.ByteString', but for long targets the -- smaller memory footprint of lazy 'L.ByteString's can make searching -- those (sometimes much) faster. On the other hand, there are cases -- where searching in a strict target is much faster, even for long targets. -- -- On 32-bit systems, 'Int'-arithmetic is much faster than 'Int64'-arithmetic, -- so when there are many matches, that can make a significant difference. -- -- Also, the modification to ameliorate the case of periodic patterns -- is defeated by chunk-boundaries, so long patterns with a short period -- and many matches exhibit poor behaviour (consider using @indices@ from -- "Data.ByteString.Lazy.Search.DFA" or "Data.ByteString.Lazy.Search.KMP" -- in those cases, the former for medium-length patterns, the latter for -- long patterns; none of the functions except 'indices' suffer from -- this problem, though). -- $caution -- -- When working with a lazy target string, the relation between the pattern -- length and the chunk size can play a big rôle. -- Crossing chunk boundaries is relatively expensive, so when that becomes -- a frequent occurrence, as may happen when the pattern length is close -- to or larger than the chunk size, performance is likely to degrade. -- If it is needed, steps can be taken to ameliorate that effect, but unless -- entirely separate functions are introduced, that would hurt the -- performance for the more common case of patterns much shorter than -- the default chunk size. -- $complexity -- -- Preprocessing the pattern is /O/(@patternLength@ + σ) in time and -- space (σ is the alphabet size, 256 here) for all functions. -- The time complexity of the searching phase for 'indices' -- is /O/(@targetLength@ \/ @patternLength@) in the best case. -- For non-periodic patterns, the worst case complexity is -- /O/(@targetLength@), but for periodic patterns, the worst case complexity -- is /O/(@targetLength@ * @patternLength@) for the original Boyer-Moore -- algorithm. -- -- The searching functions in this module contain a modification which -- drastically improves the performance for periodic patterns, although -- less for lazy targets than for strict ones. -- If I'm not mistaken, the worst case complexity for periodic patterns -- is /O/(@targetLength@ * (1 + @patternLength@ \/ @chunkSize@)). -- -- The other functions don't have to deal with possible overlapping -- patterns, hence the worst case complexity for the processing phase -- is /O/(@targetLength@) (respectively /O/(@firstIndex + patternLength@) -- for the breaking functions if the pattern occurs). -- $partial -- -- All functions can usefully be partially applied. Given only a pattern, -- the pattern is preprocessed only once, allowing efficient re-use. -- $overflow -- -- The current code uses @Int@ to keep track of the locations in the -- target string. If the length of the pattern plus the length of any -- strict chunk of the target string is greater or equal to -- @'maxBound' :: 'Int'@ then this will overflow causing an error. We try -- to detect this and call 'error' before a segfault occurs. ------------------------------------------------------------------------------ -- Exported Functions -- ------------------------------------------------------------------------------ -- | @'indices'@ finds the starting indices of all possibly overlapping -- occurrences of the pattern in the target string. -- If the pattern is empty, the result is @[0 .. 'length' target]@. {-# INLINE indices #-} indices :: S.ByteString -- ^ Strict pattern to find -> L.ByteString -- ^ Lazy string to search -> [Int64] -- ^ Offsets of matches indices = BM.matchSL -- | @'nonOverlappingIndices'@ finds the starting indices of all -- non-overlapping occurrences of the pattern in the target string. -- It is more efficient than removing indices from the list produced -- by 'indices'. {-# INLINE nonOverlappingIndices #-} nonOverlappingIndices :: S.ByteString -- ^ Strict pattern to find -> L.ByteString -- ^ Lazy string to search -> [Int64] -- ^ Offsets of matches nonOverlappingIndices = BM.matchNOL -- | @'breakOn' pattern target@ splits @target@ at the first occurrence -- of @pattern@. If the pattern does not occur in the target, the -- second component of the result is empty, otherwise it starts with -- @pattern@. If the pattern is empty, the first component is empty. -- For a non-empty pattern, the first component is generated lazily, -- thus the first parts of it can be available before the pattern has -- been found or determined to be absent. -- -- @ -- 'uncurry' 'L.append' . 'breakOn' pattern = 'id' -- @ {-# INLINE breakOn #-} breakOn :: S.ByteString -- ^ Strict pattern to search for -> L.ByteString -- ^ Lazy string to search in -> (L.ByteString, L.ByteString) -- ^ Head and tail of string broken at substring breakOn = BM.breakSubstringL -- | @'breakAfter' pattern target@ splits @target@ behind the first occurrence -- of @pattern@. An empty second component means that either the pattern -- does not occur in the target or the first occurrence of pattern is at -- the very end of target. If you need to discriminate between those cases, -- use breakFindAfter. -- If the pattern is empty, the first component is empty. -- For a non-empty pattern, the first component is generated lazily, -- thus the first parts of it can be available before the pattern has -- been found or determined to be absent. -- -- @ -- 'uncurry' 'L.append' . 'breakAfter' pattern = 'id' -- @ {-# INLINE breakAfter #-} breakAfter :: S.ByteString -- ^ Strict pattern to search for -> L.ByteString -- ^ Lazy string to search in -> (L.ByteString, L.ByteString) -- ^ Head and tail of string broken after substring breakAfter = BM.breakAfterL -- | @'breakFindAfter'@ does the same as 'breakAfter' but additionally indicates -- whether the pattern is present in the target. -- -- @ -- 'fst' . 'breakFindAfter' pat = 'breakAfter' pat -- @ {-# INLINE breakFindAfter #-} breakFindAfter :: S.ByteString -- ^ Strict pattern to search for -> L.ByteString -- ^ Lazy string to search in -> ((L.ByteString, L.ByteString), Bool) -- ^ Head and tail of string broken after substring -- and presence of pattern breakFindAfter = BM.breakFindAfterL -- | @'replace' pat sub text@ replaces all (non-overlapping) occurrences of -- @pat@ in @text@ with @sub@. If occurrences of @pat@ overlap, the first -- occurrence that does not overlap with a replaced previous occurrence -- is substituted. Occurrences of @pat@ arising from a substitution -- will not be substituted. For example: -- -- @ -- 'replace' \"ana\" \"olog\" \"banana\" = \"bologna\" -- 'replace' \"ana\" \"o\" \"bananana\" = \"bono\" -- 'replace' \"aab\" \"abaa\" \"aaabb\" = \"aabaab\" -- @ -- -- The result is a lazy 'L.ByteString', -- which is lazily produced, without copying. -- Equality of pattern and substitution is not checked, but -- -- @ -- 'replace' pat pat text == text -- @ -- -- holds (the internal structure is generally different). -- If the pattern is empty but not the substitution, the result -- is equivalent to (were they 'String's) @cycle sub@. -- -- For non-empty @pat@ and @sub@ a lazy 'L.ByteString', -- -- @ -- 'L.concat' . 'Data.List.intersperse' sub . 'split' pat = 'replace' pat sub -- @ -- -- and analogous relations hold for other types of @sub@. {-# INLINE replace #-} replace :: Substitution rep => S.ByteString -- ^ Strict pattern to replace -> rep -- ^ Replacement string -> L.ByteString -- ^ Lazy string to modify -> L.ByteString -- ^ Lazy result replace = BM.replaceAllL -- | @'split' pattern target@ splits @target@ at each (non-overlapping) -- occurrence of @pattern@, removing @pattern@. If @pattern@ is empty, -- the result is an infinite list of empty 'L.ByteString's, if @target@ -- is empty but not @pattern@, the result is an empty list, otherwise -- the following relations hold (where @patL@ is the lazy 'L.ByteString' -- corresponding to @pat@): -- -- @ -- 'L.concat' . 'Data.List.intersperse' patL . 'split' pat = 'id', -- 'length' ('split' pattern target) == -- 'length' ('nonOverlappingIndices' pattern target) + 1, -- @ -- -- no fragment in the result contains an occurrence of @pattern@. {-# INLINE split #-} split :: S.ByteString -- ^ Strict pattern to split on -> L.ByteString -- ^ Lazy string to split -> [L.ByteString] -- ^ Fragments of string split = BM.splitDropL -- | @'splitKeepEnd' pattern target@ splits @target@ after each (non-overlapping) -- occurrence of @pattern@. If @pattern@ is empty, the result is an -- infinite list of empty 'L.ByteString's, otherwise the following -- relations hold: -- -- @ -- 'L.concat' . 'splitKeepEnd' pattern = 'id', -- @ -- -- all fragments in the result except possibly the last end with -- @pattern@, no fragment contains more than one occurrence of @pattern@. {-# INLINE splitKeepEnd #-} splitKeepEnd :: S.ByteString -- ^ Strict pattern to split on -> L.ByteString -- ^ Lazy string to split -> [L.ByteString] -- ^ Fragments of string splitKeepEnd = BM.splitKeepEndL -- | @'splitKeepFront'@ is like 'splitKeepEnd', except that @target@ is split -- before each occurrence of @pattern@ and hence all fragments -- with the possible exception of the first begin with @pattern@. -- No fragment contains more than one non-overlapping occurrence -- of @pattern@. {-# INLINE splitKeepFront #-} splitKeepFront :: S.ByteString -- ^ Strict pattern to split on -> L.ByteString -- ^ Lazy string to split -> [L.ByteString] -- ^ Fragments of string splitKeepFront = BM.splitKeepFrontL -- | @'strictify'@ converts a lazy 'L.ByteString' to a strict 'S.ByteString' -- to make it a suitable pattern. strictify :: L.ByteString -> S.ByteString strictify = S.concat . L.toChunks