{-# LANGUAGE BangPatterns #-} {-# OPTIONS_HADDOCK hide, prune #-} -- | -- Module : Data.ByteString.Lazy.Search.Internal.BoyerMoore -- Copyright : Daniel Fischer -- Chris Kuklewicz -- Licence : BSD3 -- Maintainer : Daniel Fischer <daniel.is.fischer@googlemail.com> -- Stability : Provisional -- Portability : non-portable (BangPatterns) -- -- Fast overlapping Boyer-Moore search of both strict and lazy -- 'S.ByteString' values. Breaking, splitting and replacing -- using the Boyer-Moore algorithm. -- -- Descriptions of the algorithm can be found at -- <http://www-igm.univ-mlv.fr/~lecroq/string/node14.html#SECTION00140> -- and -- <http://en.wikipedia.org/wiki/Boyer-Moore_string_search_algorithm> -- -- Original authors: Daniel Fischer (daniel.is.fischer at googlemail.com) and -- Chris Kuklewicz (haskell at list.mightyreason.com). module Data.ByteString.Lazy.Search.Internal.BoyerMoore ( matchLL , matchSL -- Non-overlapping , matchNOL -- Replacing substrings -- replacing , replaceAllL -- Breaking on substrings -- breaking , breakSubstringL , breakAfterL , breakFindAfterL -- Splitting on substrings -- splitting , splitKeepEndL , splitKeepFrontL , splitDropL ) where import Data.ByteString.Search.Internal.Utils (occurs, suffShifts, ldrop, lsplit, keep, release, strictify) import Data.ByteString.Search.Substitution import qualified Data.ByteString as S import qualified Data.ByteString.Lazy as L import Data.ByteString.Unsafe (unsafeIndex) import Data.Array.Base (unsafeAt) import Data.Word (Word8) import Data.Int (Int64) -- overview -- -- This module exports three search functions for searching in lazy -- ByteSrings, one for searching non-overlapping occurrences of a strict -- pattern, and one each for searchin overlapping occurrences of a strict -- resp. lazy pattern. The common base name is @match@, the suffix -- indicates the type of search. These functions -- return (for a non-empty pattern) a list of all the indices of the target -- string where an occurrence of the pattern begins, if some occurrences -- overlap, all starting indices are reported. The list is produced lazily, -- so not necessarily the entire target string is searched. -- -- The behaviour of these functions when given an empty pattern has changed. -- Formerly, the @matchXY@ functions returned an empty list then, now it's -- @[0 .. 'length' target]@. -- -- Newly added are functions to replace all (non-overlapping) occurrences -- of a pattern within a string, functions to break ByteStrings at the first -- occurrence of a pattern and functions to split ByteStrings at each -- occurrence of a pattern. None of these functions does copying, so they -- don't introduce large memory overhead. -- -- Internally, a lazy pattern is always converted to a strict ByteString, -- which is necessary for an efficient implementation of the algorithm. -- The limit this imposes on the length of the pattern is probably -- irrelevant in practice, but perhaps it should be mentioned. -- This also means that the @matchL*@ functions are mere convenience wrappers. -- Except for the initial 'strictify'ing, there's no difference between lazy -- and strict patterns, they call the same workers. There is, however, a -- difference between strict and lazy target strings. -- For the new functions, no such wrappers are provided, you have to -- 'strictify' lazy patterns yourself. -- caution -- -- When working with a lazy target string, the relation between the pattern -- length and the chunk size can play a big rôle. -- Crossing chunk boundaries is relatively expensive, so when that becomes -- a frequent occurrence, as may happen when the pattern length is close -- to or larger than the chunk size, performance is likely to degrade. -- If it is needed, steps can be taken to ameliorate that effect, but unless -- entirely separate functions are introduced, that would hurt the -- performance for the more common case of patterns much shorter than -- the default chunk size. -- performance -- -- In general, the Boyer-Moore algorithm is the most efficient method to -- search for a pattern inside a string, so most of the time, you'll want -- to use the functions of this module, hence this is where the most work -- has gone. Very short patterns are an exception to this, for those you -- should consider using a finite automaton -- ("Data.ByteString.Search.DFA.Array"). That is also often the better -- choice for searching longer periodic patterns in a lazy ByteString -- with many matches. -- -- Operating on a strict target string is mostly faster than on a lazy -- target string, but the difference is usually small (according to my -- tests). -- -- The known exceptions to this rule of thumb are -- -- [long targets] Then the smaller memory footprint of a lazy target often -- gives (much) better performance. -- -- [high number of matches] When there are very many matches, strict target -- strings are much faster, especially if the pattern is periodic. -- -- If both conditions hold, either may outweigh the other. -- complexity -- -- Preprocessing the pattern is /O/(@patternLength@ + σ) in time and -- space (σ is the alphabet size, 256 here) for all functions. -- The time complexity of the searching phase for @matchXY@ -- is /O/(@targetLength@ \/ @patternLength@) in the best case. -- For non-periodic patterns, the worst case complexity is -- /O/(@targetLength@), but for periodic patterns, the worst case complexity -- is /O/(@targetLength@ * @patternLength@) for the original Boyer-Moore -- algorithm. -- -- The searching functions in this module now contain a modification which -- drastically improves the performance for periodic patterns. -- I believe that for strict target strings, the worst case is now -- /O/(@targetLength@) also for periodic patterns and for lazy target strings, -- my semi-educated guess is -- /O/(@targetLength@ * (1 + @patternLength@ \/ @chunkSize@)). -- I may be very wrong, though. -- -- The other functions don't have to deal with possible overlapping -- patterns, hence the worst case complexity for the processing phase -- is /O/(@targetLength@) (respectively /O/(@firstIndex + patternLength@) -- for the breaking functions if the pattern occurs). -- currying -- -- These functions can all be usefully curried. Given only a pattern -- the curried version will compute the supporting lookup tables only -- once, allowing for efficient re-use. Similarly, the curried -- 'matchLL' and 'matchLS' will compute the concatenated pattern only -- once. -- overflow -- -- The current code uses @Int@ to keep track of the locations in the -- target string. If the length of the pattern plus the length of any -- strict chunk of the target string is greater than -- @'maxBound' :: 'Int'@ then this will overflow causing an error. We -- try to detect this and call 'error' before a segfault occurs. ------------------------------------------------------------------------------ -- Wrappers -- ------------------------------------------------------------------------------ -- matching -- -- These functions find the indices of all (possibly overlapping) -- occurrences of a pattern in a target string. -- If the pattern is empty, the result is @[0 .. length target]@. -- If the pattern is much shorter than the target string -- and the pattern does not occur very near the beginning of the target, -- -- > not . null $ matchSS pattern target -- -- is a much more efficient version of 'S.isInfixOf'. -- | @'matchLL'@ finds the starting indices of all possibly overlapping -- occurrences of the pattern in the target string. -- It is a simple wrapper for 'Data.ByteString.Lazy.Search.indices'. -- If the pattern is empty, the result is @[0 .. 'length' target]@. {-# INLINE matchLL #-} matchLL :: L.ByteString -- ^ Lazy pattern -> L.ByteString -- ^ Lazy target string -> [Int64] -- ^ Offsets of matches matchLL pat = search . L.toChunks where search = lazySearcher True (strictify pat) -- | @'matchSL'@ finds the starting indices of all possibly overlapping -- occurrences of the pattern in the target string. -- It is an alias for 'Data.ByteString.Lazy.Search.indices'. -- If the pattern is empty, the result is @[0 .. 'length' target]@. {-# INLINE matchSL #-} matchSL :: S.ByteString -- ^ Strict pattern -> L.ByteString -- ^ Lazy target string -> [Int64] -- ^ Offsets of matches matchSL pat = search . L.toChunks where search = lazySearcher True pat -- | @'matchNOL'@ finds the indices of all non-overlapping occurrences -- of the pattern in the lazy target string. {-# INLINE matchNOL #-} matchNOL :: S.ByteString -- ^ Strict pattern -> L.ByteString -- ^ Lazy target string -> [Int64] -- ^ Offsets of matches matchNOL pat = search . L.toChunks where search = lazySearcher False pat -- replacing -- -- These functions replace all (non-overlapping) occurrences of a pattern -- in the target string. If some occurrences overlap, the earliest is -- replaced and replacing continues at the index after the replaced -- occurrence, for example -- -- > replaceAllL \"ana\" \"olog\" \"banana\" == \"bologna\", -- > replaceAllS \"abacab\" \"u\" \"abacabacabacab\" == \"uacu\", -- > replaceAllS \"aa\" \"aaa\" \"aaaa\" == \"aaaaaa\". -- -- Equality of pattern and substitution is not checked, but -- -- > pat == sub => 'strictify' (replaceAllS pat sub str) == str, -- > pat == sub => replaceAllL pat sub str == str. -- -- The result is a lazily generated lazy ByteString, the first chunks will -- generally be available before the entire target has been scanned. -- If the pattern is empty, but not the substitution, the result is -- equivalent to @'cycle' sub@. {-# INLINE replaceAllL #-} replaceAllL :: Substitution rep => S.ByteString -- ^ Pattern to replace -> rep -- ^ Substitution string -> L.ByteString -- ^ Target string -> L.ByteString -- ^ Lazy result replaceAllL pat | S.null pat = \sub -> prependCycle sub | S.length pat == 1 = let breaker = lazyBreak pat repl subst strs | null strs = [] | otherwise = case breaker strs of (pre, mtch) -> pre ++ case mtch of [] -> [] _ -> subst (repl subst (ldrop 1 mtch)) in \sub -> let repl1 = repl (substitution sub) in L.fromChunks . repl1 . L.toChunks | otherwise = let repl = lazyRepl pat in \sub -> let repl1 = repl (substitution sub) in L.fromChunks . repl1 . L.toChunks -- breaking -- -- Break a string on a pattern. The first component of the result -- contains the prefix of the string before the first occurrence of the -- pattern, the second component contains the remainder. -- The following relations hold: -- -- > breakSubstringX \"\" str = (\"\", str) -- > not (pat `isInfixOf` str) == null (snd $ breakSunbstringX pat str) -- > True == case breakSubstringX pat str of -- > (x, y) -> not (pat `isInfixOf` x) -- > && (null y || pat `isPrefixOf` y) -- | The analogous function for a lazy target string. -- The first component is generated lazily, so parts of it can be -- available before the pattern is detected (or found to be absent). {-# INLINE breakSubstringL #-} breakSubstringL :: S.ByteString -- ^ Pattern to break on -> L.ByteString -- ^ String to break up -> (L.ByteString, L.ByteString) -- ^ Prefix and remainder of broken string breakSubstringL pat = breaker . L.toChunks where lbrk = lazyBreak pat breaker strs = let (f, b) = lbrk strs in (L.fromChunks f, L.fromChunks b) breakAfterL :: S.ByteString -> L.ByteString -> (L.ByteString, L.ByteString) breakAfterL pat | S.null pat = \str -> (L.empty, str) breakAfterL pat = breaker' . L.toChunks where !patLen = S.length pat breaker = lazyBreak pat breaker' strs = let (pre, mtch) = breaker strs (pl, a) = if null mtch then ([],[]) else lsplit patLen mtch in (L.fromChunks (pre ++ pl), L.fromChunks a) breakFindAfterL :: S.ByteString -> L.ByteString -> ((L.ByteString, L.ByteString), Bool) breakFindAfterL pat | S.null pat = \str -> ((L.empty, str), True) breakFindAfterL pat = breaker' . L.toChunks where !patLen = S.length pat breaker = lazyBreak pat breaker' strs = let (pre, mtch) = breaker strs (pl, a) = if null mtch then ([],[]) else lsplit patLen mtch in ((L.fromChunks (pre ++ pl), L.fromChunks a), not (null mtch)) -- splitting -- -- These functions implement various splitting strategies. -- -- If the pattern to split on is empty, all functions return an -- infinite list of empty ByteStrings. -- Otherwise, the names are rather self-explanatory. -- -- For nonempty patterns, the following relations hold: -- -- > concat (splitKeepXY pat str) == str -- > concat ('Data.List.intersperse' pat (splitDropX pat str)) == str. -- -- All fragments except possibly the last in the result of -- @splitKeepEndX pat@ end with @pat@, none of the fragments contains -- more than one occurrence of @pat@ or is empty. -- -- All fragments except possibly the first in the result of -- @splitKeepFrontX pat@ begin with @pat@, none of the fragments -- contains more than one occurrence of @patq or is empty. -- -- > splitDropX pat str == map dropPat (splitKeepFrontX pat str) -- > where -- > patLen = length pat -- > dropPat frag -- > | pat `isPrefixOf` frag = drop patLen frag -- > | otherwise = frag -- -- but @splitDropX@ is a little more efficient than that. {-# INLINE splitKeepEndL #-} splitKeepEndL :: S.ByteString -- ^ Pattern to split on -> L.ByteString -- ^ String to split -> [L.ByteString] -- ^ List of fragments splitKeepEndL pat | S.null pat = const (repeat L.empty) | otherwise = let splitter = lazySplitKeepEnd pat in map L.fromChunks . splitter . L.toChunks {-# INLINE splitKeepFrontL #-} splitKeepFrontL :: S.ByteString -- ^ Pattern to split on -> L.ByteString -- ^ String to split -> [L.ByteString] -- ^ List of fragments splitKeepFrontL pat | S.null pat = const (repeat L.empty) | otherwise = let splitter = lazySplitKeepFront pat in map L.fromChunks . splitter . L.toChunks {-# INLINE splitDropL #-} splitDropL :: S.ByteString -- ^ Pattern to split on -> L.ByteString -- ^ String to split -> [L.ByteString] -- ^ List of fragments splitDropL pat | S.null pat = const (repeat L.empty) | otherwise = let splitter = lazySplitDrop pat in map L.fromChunks . splitter . L.toChunks ------------------------------------------------------------------------------ -- Search Functions -- ------------------------------------------------------------------------------ lazySearcher :: Bool -> S.ByteString -> [S.ByteString] -> [Int64] lazySearcher _ !pat | S.null pat = let zgo !prior [] = [prior] zgo prior (!str : rest) = let !l = S.length str !prior' = prior + fromIntegral l in [prior + fromIntegral i | i <- [0 .. l-1]] ++ zgo prior' rest in zgo 0 | S.length pat == 1 = let !w = S.head pat ixes = S.elemIndices w go _ [] = [] go !prior (!str : rest) = let !prior' = prior + fromIntegral (S.length str) in map ((+ prior) . fromIntegral) (ixes str) ++ go prior' rest in go 0 lazySearcher !overlap pat = searcher where {-# INLINE patAt #-} patAt :: Int -> Word8 patAt !i = unsafeIndex pat i !patLen = S.length pat !patEnd = patLen - 1 {-# INLINE preEnd #-} preEnd = patEnd - 1 !maxLen = maxBound - patLen !occT = occurs pat -- for bad-character-shift !suffT = suffShifts pat -- for good-suffix-shift !skip = if overlap then unsafeAt suffT 0 else patLen -- shift after a complete match !kept = patLen - skip -- length of known prefix after full match !pe = patAt patEnd -- last pattern byte for fast comparison {-# INLINE occ #-} occ !w = unsafeAt occT (fromIntegral w) {-# INLINE suff #-} suff !i = unsafeAt suffT i searcher lst = case lst of [] -> [] (h : t) -> if maxLen < S.length h then error "Overflow in BoyerMoore.lazySearcher" else seek 0 [] h t 0 patEnd -- seek is used to position the "zipper" of (past, str, future) to the -- correct S.ByteString to search. This is done by ensuring that -- 0 <= strPos < strLen, where strPos = diffPos + patPos. -- Note that future is not a strict parameter. The bytes being compared -- will then be (strAt strPos) and (patAt patPos). -- Splitting this into specialised versions is possible, but it would -- only be useful if the pattern length is close to (or larger than) -- the chunk size. For ordinary patterns of at most a few hundred bytes, -- the overhead of yet more code-paths and larger code size will probably -- outweigh the small gains in the relatively rare calls to seek. seek :: Int64 -> [S.ByteString] -> S.ByteString -> [S.ByteString] -> Int -> Int -> [Int64] seek !prior !past !str future !diffPos !patPos | strPos < 0 = -- need to look at previous chunk case past of (h : t) -> let !hLen = S.length h in seek (prior - fromIntegral hLen) t h (str : future) (diffPos + hLen) patPos [] -> error "seek back too far!" | strEnd < strPos = -- need to look at next chunk if there is case future of (h : t) -> let {-# INLINE prior' #-} prior' = prior + fromIntegral strLen !diffPos' = diffPos - strLen {-# INLINE past' #-} past' = release (-diffPos') (str : past) in if maxLen < S.length h then error "Overflow in BoyerMoore.lazySearcher" else seek prior' past' h t diffPos' patPos [] -> [] | patPos == patEnd = checkEnd strPos | diffPos < 0 = matcherN diffPos patPos | otherwise = matcherP diffPos patPos where !strPos = diffPos + patPos !strLen = S.length str !strEnd = strLen - 1 !maxDiff = strLen - patLen {-# INLINE strAt #-} strAt !i = unsafeIndex str i -- While comparing the last byte of the pattern, the bad- -- character-shift is always at least as large as the good- -- suffix-shift. Eliminating the unnecessary memory reads and -- comparison speeds things up noticeably. checkEnd !sI -- index in string to compare to last of pattern | strEnd < sI = seek prior past str future (sI - patEnd) patEnd | otherwise = case strAt sI of !c | c == pe -> if sI < patEnd then case sI of 0 -> seek prior past str future (-patEnd) preEnd _ -> matcherN (sI - patEnd) preEnd else matcherP (sI - patEnd) preEnd | otherwise -> checkEnd (sI + patEnd + occ c) -- Once the last byte has matched, we enter the full matcher -- diff is the offset of the window, patI the index of the -- pattern byte to compare next. -- matcherN is the tight loop that walks backwards from the end -- of the pattern checking for matching bytes. The offset is -- always negative, so no complete match can occur here. -- When a byte matches, we need to check whether we've reached -- the front of this chunk, otherwise whether we need the next. matcherN !diff !patI = case strAt (diff + patI) of !c | c == patAt patI -> if diff + patI == 0 then seek prior past str future diff (patI - 1) else matcherN diff (patI - 1) | otherwise -> let {-# INLINE badShift #-} badShift = patI + occ c {-# INLINE goodShift #-} goodShift = suff patI !diff' = diff + max badShift goodShift in if maxDiff < diff' then seek prior past str future diff' patEnd else checkEnd (diff' + patEnd) -- matcherP is the tight loop for non-negative offsets. -- When the pattern is shifted, we must check whether we leave -- the current chunk, otherwise we only need to check for a -- complete match. matcherP !diff !patI = case strAt (diff + patI) of !c | c == patAt patI -> if patI == 0 then prior + fromIntegral diff : let !diff' = diff + skip in if maxDiff < diff' then seek prior past str future diff' patEnd else if skip == patLen then checkEnd (diff' + patEnd) else afterMatch diff' patEnd else matcherP diff (patI - 1) | otherwise -> let {-# INLINE badShift #-} badShift = patI + occ c {-# INLINE goodShift #-} goodShift = suff patI !diff' = diff + max badShift goodShift in if maxDiff < diff' then seek prior past str future diff' patEnd else checkEnd (diff' + patEnd) -- After a full match, we know how long a prefix of the pattern -- still matches. Do not re-compare the prefix to prevent O(m*n) -- behaviour for periodic patterns. -- This breaks down at chunk boundaries, but except for long -- patterns with a short period, that shouldn't matter much. afterMatch !diff !patI = case strAt (diff + patI) of !c | c == patAt patI -> if patI == kept then prior + fromIntegral diff : let !diff' = diff + skip in if maxDiff < diff' then seek prior past str future diff' patEnd else afterMatch diff' patEnd else afterMatch diff (patI - 1) | patI == patEnd -> checkEnd (diff + (2*patEnd) + occ c) | otherwise -> let {-# INLINE badShift #-} badShift = patI + occ c {-# INLINE goodShift #-} goodShift = suff patI !diff' = diff + max badShift goodShift in if maxDiff < diff' then seek prior past str future diff' patEnd else checkEnd (diff' + patEnd) ------------------------------------------------------------------------------ -- Breaking Functions -- ------------------------------------------------------------------------------ -- Ugh! Code duplication ahead! -- But we want to get the first component lazily, so it's no good to find -- the first index (if any) and then split. -- Therefore bite the bullet and copy most of the code of lazySearcher. -- No need for afterMatch here, fortunately. lazyBreak ::S.ByteString -> [S.ByteString] -> ([S.ByteString], [S.ByteString]) lazyBreak !pat | S.null pat = \lst -> ([],lst) | S.length pat == 1 = let !w = S.head pat go [] = ([], []) go (!str : rest) = case S.elemIndices w str of [] -> let (pre, post) = go rest in (str : pre, post) (i:_) -> if i == 0 then ([], str : rest) else ([S.take i str], S.drop i str : rest) in go lazyBreak pat = breaker where !patLen = S.length pat !patEnd = patLen - 1 !occT = occurs pat !suffT = suffShifts pat !maxLen = maxBound - patLen !pe = patAt patEnd {-# INLINE patAt #-} patAt !i = unsafeIndex pat i {-# INLINE occ #-} occ !w = unsafeAt occT (fromIntegral w) {-# INLINE suff #-} suff !i = unsafeAt suffT i breaker lst = case lst of [] -> ([],[]) (h:t) -> if maxLen < S.length h then error "Overflow in BoyerMoore.lazyBreak" else seek [] h t 0 patEnd seek :: [S.ByteString] -> S.ByteString -> [S.ByteString] -> Int -> Int -> ([S.ByteString], [S.ByteString]) seek !past !str future !offset !patPos | strPos < 0 = case past of [] -> error "not enough past!" (h : t) -> seek t h (str : future) (offset + S.length h) patPos | strEnd < strPos = case future of [] -> (foldr (flip (.) . (:)) id past [str], []) (h : t) -> let !off' = offset - strLen (past', !discharge) = keep (-off') (str : past) in if maxLen < S.length h then error "Overflow in BoyerMoore.lazyBreak (future)" else let (pre,post) = seek past' h t off' patPos in (foldr (flip (.) . (:)) id discharge pre, post) | patPos == patEnd = checkEnd strPos | offset < 0 = matcherN offset patPos | otherwise = matcherP offset patPos where {-# INLINE strAt #-} strAt !i = unsafeIndex str i !strLen = S.length str !strEnd = strLen - 1 !maxOff = strLen - patLen !strPos = offset + patPos checkEnd !sI | strEnd < sI = seek past str future (sI - patEnd) patEnd | otherwise = case strAt sI of !c | c == pe -> if sI < patEnd then (if sI == 0 then seek past str future (-patEnd) (patEnd - 1) else matcherN (sI - patEnd) (patEnd - 1)) else matcherP (sI - patEnd) (patEnd - 1) | otherwise -> checkEnd (sI + patEnd + occ c) matcherN !off !patI = case strAt (off + patI) of !c | c == patAt patI -> if off + patI == 0 then seek past str future off (patI - 1) else matcherN off (patI - 1) | otherwise -> let !off' = off + max (suff patI) (patI + occ c) in if maxOff < off' then seek past str future off' patEnd else checkEnd (off' + patEnd) matcherP !off !patI = case strAt (off + patI) of !c | c == patAt patI -> if patI == 0 then let !pre = if off == 0 then [] else [S.take off str] !post = S.drop off str in (foldr (flip (.) . (:)) id past pre, post:future) else matcherP off (patI - 1) | otherwise -> let !off' = off + max (suff patI) (patI + occ c) in if maxOff < off' then seek past str future off' patEnd else checkEnd (off' + patEnd) ------------------------------------------------------------------------------ -- Splitting Functions -- ------------------------------------------------------------------------------ -- non-empty pattern lazySplitKeepFront :: S.ByteString -> [S.ByteString] -> [[S.ByteString]] lazySplitKeepFront pat = splitter' where !patLen = S.length pat breaker = lazyBreak pat splitter' strs = case splitter strs of ([]:rest) -> rest other -> other splitter [] = [] splitter strs = case breaker strs of (pre, mtch) -> pre : case mtch of [] -> [] _ -> case lsplit patLen mtch of (pt, rst) -> if null rst then [pt] else let (h : t) = splitter rst in (pt ++ h) : t -- non-empty pattern lazySplitKeepEnd :: S.ByteString -> [S.ByteString] -> [[S.ByteString]] lazySplitKeepEnd pat = splitter where !patLen = S.length pat breaker = lazyBreak pat splitter [] = [] splitter strs = case breaker strs of (pre, mtch) -> let (h : t) = if null mtch then [[]] else case lsplit patLen mtch of (pt, rst) -> pt : splitter rst in (pre ++ h) : t lazySplitDrop :: S.ByteString -> [S.ByteString] -> [[S.ByteString]] lazySplitDrop pat = splitter where !patLen = S.length pat breaker = lazyBreak pat splitter [] = [] splitter strs = splitter' strs splitter' [] = [[]] splitter' strs = case breaker strs of (pre,mtch) -> pre : case mtch of [] -> [] _ -> splitter' (ldrop patLen mtch) ------------------------------------------------------------------------------ -- Replacing Functions -- ------------------------------------------------------------------------------ {- These would be really nice. Unfortunately they're too slow, so instead, there's another instance of almost the same code as in lazySearcher below. -- variant of below lazyFRepl :: S.ByteString -> ([S.ByteString] -> [S.ByteString]) -> [S.ByteString] -> [S.ByteString] lazyFRepl pat = repl where !patLen = S.length pat breaker = lazyBreak pat repl sub = replacer where replacer [] = [] replacer strs = let (pre, mtch) = breaker strs in pre ++ case mtch of [] -> [] _ -> sub (replacer (ldrop patLen mtch)) -- This is nice and short. I really hope it's performing well! lazyBRepl :: S.ByteString -> S.ByteString -> [S.ByteString] -> [S.ByteString] lazyBRepl pat !sub = replacer where !patLen = S.length pat breaker = lazyBreak pat replacer [] = [] replacer strs = let (pre, mtch) = breaker strs in pre ++ case mtch of [] -> [] _ -> sub : replacer (ldrop patLen mtch) -} -- Yet more code duplication. -- -- Benchmark it against an implementation using lazyBreak and, -- unless it's significantly faster, NUKE IT!! -- -- Sigh, it is significantly faster. 10 - 25 %. -- I could live with the 10, but 25 is too much. -- -- Hmm, maybe an implementation via -- replace pat sub = L.intercalate sub . split pat -- would be competitive now. -- TODO: test speed and space usage. -- -- replacing loop for lazy ByteStrings as list of chunks, -- called only for non-empty patterns lazyRepl :: S.ByteString -> ([S.ByteString] -> [S.ByteString]) -> [S.ByteString] -> [S.ByteString] lazyRepl pat = replacer where !patLen = S.length pat !patEnd = patLen - 1 !occT = occurs pat !suffT = suffShifts pat !maxLen = maxBound - patLen !pe = patAt patEnd {-# INLINE patAt #-} patAt !i = unsafeIndex pat i {-# INLINE occ #-} occ !w = unsafeAt occT (fromIntegral w) {-# INLINE suff #-} suff !i = unsafeAt suffT i replacer sub lst = case lst of [] -> [] (h:t) -> if maxLen < S.length h then error "Overflow in BoyerMoore.lazyRepl" else seek [] h t 0 patEnd where chop _ [] = [] chop !k (!str : rest) | k < s = if maxLen < (s - k) then error "Overflow in BoyerMoore.lazyRepl (chop)" else seek [] (S.drop k str) rest 0 patEnd | otherwise = chop (k-s) rest where !s = S.length str seek :: [S.ByteString] -> S.ByteString -> [S.ByteString] -> Int -> Int -> [S.ByteString] seek !past !str fut !offset !patPos | strPos < 0 = case past of [] -> error "not enough past!" (h : t) -> seek t h (str : fut) (offset + S.length h) patPos | strEnd < strPos = case fut of [] -> foldr (flip (.) . (:)) id past [str] (h : t) -> let !off' = offset - strLen (past', !discharge) = keep (-off') (str : past) in if maxLen < S.length h then error "Overflow in BoyerMoore.lazyRepl (future)" else foldr (flip (.) . (:)) id discharge $ seek past' h t off' patPos | patPos == patEnd = checkEnd strPos | offset < 0 = matcherN offset patPos | otherwise = matcherP offset patPos where {-# INLINE strAt #-} strAt !i = unsafeIndex str i !strLen = S.length str !strEnd = strLen - 1 !maxOff = strLen - patLen !strPos = offset + patPos checkEnd !sI | strEnd < sI = seek past str fut (sI - patEnd) patEnd | otherwise = case strAt sI of !c | c == pe -> if sI < patEnd then (if sI == 0 then seek past str fut (-patEnd) (patEnd - 1) else matcherN (sI - patEnd) (patEnd - 1)) else matcherP (sI - patEnd) (patEnd - 1) | otherwise -> checkEnd (sI + patEnd + occ c) matcherN !off !patI = case strAt (off + patI) of !c | c == patAt patI -> if off + patI == 0 then seek past str fut off (patI - 1) else matcherN off (patI - 1) | otherwise -> let !off' = off + max (suff patI) (patI + occ c) in if maxOff < off' then seek past str fut off' patEnd else checkEnd (off' + patEnd) matcherP !off !patI = case strAt (off + patI) of !c | c == patAt patI -> if patI == 0 then foldr (flip (.) . (:)) id past $ let pre = if off == 0 then id else (S.take off str :) in pre . sub $ let !p = off + patLen in if p < strLen then seek [] (S.drop p str) fut 0 patEnd else chop (p - strLen) fut else matcherP off (patI - 1) | otherwise -> let !off' = off + max (suff patI) (patI + occ c) in if maxOff < off' then seek past str fut off' patEnd else checkEnd (off' + patEnd)