Linear and Exponential Generators
- exponA :: Irate -> Irate -> Irate -> Arate
- exponK :: Irate -> Irate -> Irate -> Krate
- expcurve :: (K k0, K k1) => k0 -> k1 -> Krate
- expsegA :: [Irate] -> Arate
- expsegK :: [Irate] -> Krate
- expsega :: [Irate] -> Arate
- expsegrA :: [Irate] -> Irate -> Irate -> Arate
- expsegrK :: [Irate] -> Irate -> Irate -> Krate
- gainslider :: K k0 => k0 -> Krate
- jsplineA :: (X x0, K k0, K k1) => x0 -> k0 -> k1 -> Arate
- jsplineK :: (K k0, K k1, K k2) => k0 -> k1 -> k2 -> Krate
- lineA :: Irate -> Irate -> Irate -> Arate
- lineK :: Irate -> Irate -> Irate -> Krate
- linsegA :: [Irate] -> Arate
- linsegK :: [Irate] -> Krate
- linsegrA :: [Irate] -> Irate -> Irate -> Arate
- linsegrK :: [Irate] -> Irate -> Irate -> Krate
- logcurve :: (K k0, K k1) => k0 -> k1 -> Krate
- loopseg :: (K k0, K k1, K k2) => k0 -> k1 -> [k2] -> Krate
- loopsegp :: (K k0, K k1) => k0 -> [k1] -> Krate
- lpshold :: (K k0, K k1, K k2) => k0 -> k1 -> [k2] -> Krate
- lpsholdp :: (K k0, K k1) => k0 -> [k1] -> Krate
- rsplineA :: (X x0, X x1, K k0, K k1) => x0 -> x1 -> k0 -> k1 -> Arate
- rsplineK :: (K k0, K k1, K k2, K k3) => k0 -> k1 -> k2 -> k3 -> Krate
- scale :: (K k0, K k1, K k2) => k0 -> k1 -> k2 -> Krate
- transegA :: [Irate] -> Arate
- transegK :: [Irate] -> Krate
Documentation
exponA :: Irate -> Irate -> Irate -> ArateSource
- opcode : expon
- syntax :
ares expon ia, idur, ib kres expon ia, idur, ib
- description :
Trace an exponential curve between specified points.
exponK :: Irate -> Irate -> Irate -> KrateSource
- opcode : expon
- syntax :
ares expon ia, idur, ib kres expon ia, idur, ib
- description :
Trace an exponential curve between specified points.
expcurve :: (K k0, K k1) => k0 -> k1 -> KrateSource
- opcode : expcurve
- syntax :
kout expcurve kindex, ksteepness
- description :
Generates an exponential curve in range 0 to 1 of arbitrary steepness. Steepness index equal to or lower than 1.0 will result in Not-a-Number errors and cause unstable behavior.
expsegA :: [Irate] -> ArateSource
- opcode : expseg
- syntax :
ares expseg ia, idur1, ib [, idur2] [, ic] [...] kres expseg ia, idur1, ib [, idur2] [, ic] [...]
- description :
Trace a series of exponential segments between specified points.
expsegK :: [Irate] -> KrateSource
- opcode : expseg
- syntax :
ares expseg ia, idur1, ib [, idur2] [, ic] [...] kres expseg ia, idur1, ib [, idur2] [, ic] [...]
- description :
Trace a series of exponential segments between specified points.
expsega :: [Irate] -> ArateSource
- opcode : expsega
- syntax :
ares expsega ia, idur1, ib [, idur2] [, ic] [...]
- description :
An exponential segment generator operating at a-rate. This unit is almost identical to expseg, but more precise when defining segments with very short durations (i.e., in a percussive attack phase) at audio rate.
expsegrA :: [Irate] -> Irate -> Irate -> ArateSource
- opcode : expsegr
- syntax :
ares expsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz kres expsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz
- description :
Trace a series of exponential segments between specified points including a release segment.
expsegrK :: [Irate] -> Irate -> Irate -> KrateSource
- opcode : expsegr
- syntax :
ares expsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz kres expsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz
- description :
Trace a series of exponential segments between specified points including a release segment.
gainslider :: K k0 => k0 -> KrateSource
- opcode : gainslider
- syntax :
kout gainslider kindex
- description :
This opcode is intended for use to multiply by an audio signal to give a console mixer like feel. There is no bounds in the source code so you can for example give higher than 127 values for extra amplitude but possibly clipped audio.
jsplineA :: (X x0, K k0, K k1) => x0 -> k0 -> k1 -> ArateSource
- opcode : jspline
- syntax :
ares jspline xamp, kcpsMin, kcpsMax kres jspline kamp, kcpsMin, kcpsMax
- description :
A jitter-spline generator.
jsplineK :: (K k0, K k1, K k2) => k0 -> k1 -> k2 -> KrateSource
- opcode : jspline
- syntax :
ares jspline xamp, kcpsMin, kcpsMax kres jspline kamp, kcpsMin, kcpsMax
- description :
A jitter-spline generator.
lineA :: Irate -> Irate -> Irate -> ArateSource
- opcode : line
- syntax :
ares line ia, idur, ib kres line ia, idur, ib
- description :
Trace a straight line between specified points.
lineK :: Irate -> Irate -> Irate -> KrateSource
- opcode : line
- syntax :
ares line ia, idur, ib kres line ia, idur, ib
- description :
Trace a straight line between specified points.
linsegA :: [Irate] -> ArateSource
- opcode : linseg
- syntax :
ares linseg ia, idur1, ib [, idur2] [, ic] [...] kres linseg ia, idur1, ib [, idur2] [, ic] [...]
- description :
Trace a series of line segments between specified points.
linsegK :: [Irate] -> KrateSource
- opcode : linseg
- syntax :
ares linseg ia, idur1, ib [, idur2] [, ic] [...] kres linseg ia, idur1, ib [, idur2] [, ic] [...]
- description :
Trace a series of line segments between specified points.
linsegrA :: [Irate] -> Irate -> Irate -> ArateSource
- opcode : linsegr
- syntax :
ares linsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz kres linsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz
- description :
Trace a series of line segments between specified points including a release segment.
linsegrK :: [Irate] -> Irate -> Irate -> KrateSource
- opcode : linsegr
- syntax :
ares linsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz kres linsegr ia, idur1, ib [, idur2] [, ic] [...], irel, iz
- description :
Trace a series of line segments between specified points including a release segment.
logcurve :: (K k0, K k1) => k0 -> k1 -> KrateSource
- opcode : logcurve
- syntax :
kout logcurve kindex, ksteepness
- description :
Generates a logarithmic curve in range 0 to 1 of arbitrary steepness. Steepness index equal to or lower than 1.0 will result in Not-a-Number errors and cause unstable behavior.
loopseg :: (K k0, K k1, K k2) => k0 -> k1 -> [k2] -> KrateSource
- opcode : loopseg
- syntax :
ksig loopseg kfreq, ktrig, ktime0, kvalue0 [, ktime1] [, kvalue1] [, ktime2] [, kvalue2] [...]
- description :
Generate control signal consisting of linear segments delimited by two or more specified points. The entire envelope is looped at kfreq rate. Each parameter can be varied at k-rate.
loopsegp :: (K k0, K k1) => k0 -> [k1] -> KrateSource
- opcode : loopsegp
- syntax :
ksig loopsegp kphase, kvalue0, kdur0, kvalue1 [, kdur1,..., kdurN-1, kvalueN]
- description :
Generate control signal consisiting of linear segments delimited by two or more specified points. The entire envelope can be looped at time-variant rate. Each segment coordinate can also be varied at k-rate.
lpshold :: (K k0, K k1, K k2) => k0 -> k1 -> [k2] -> KrateSource
- opcode : lpshold
- syntax :
ksig lpshold kfreq, ktrig, ktime0, kvalue0 [, ktime1] [, kvalue1] [, ktime2] [, kvalue2] [...]
- description :
Generate control signal consisting of held segments delimited by two or more specified points. The entire envelope is looped at kfreq rate. Each parameter can be varied at k-rate.
lpsholdp :: (K k0, K k1) => k0 -> [k1] -> KrateSource
- opcode : lpsholdp
- syntax :
ksig lpsholdp kphase, ktrig, ktime0, kvalue0 [, ktime1] [, kvalue1] [, ktime2] [, kvalue2] [...]
- description :
Generate control signal consisiting of held segments delimited by two or more specified points. The entire envelope can be looped at time-variant rate. Each segment coordinate can also be varied at k-rate.
rsplineA :: (X x0, X x1, K k0, K k1) => x0 -> x1 -> k0 -> k1 -> ArateSource
- opcode : rspline
- syntax :
ares rspline xrangeMin, xrangeMax, kcpsMin, kcpsMax kres rspline krangeMin, krangeMax, kcpsMin, kcpsMax
- description :
Generate random spline curves.
rsplineK :: (K k0, K k1, K k2, K k3) => k0 -> k1 -> k2 -> k3 -> KrateSource
- opcode : rspline
- syntax :
ares rspline xrangeMin, xrangeMax, kcpsMin, kcpsMax kres rspline krangeMin, krangeMax, kcpsMin, kcpsMax
- description :
Generate random spline curves.
scale :: (K k0, K k1, K k2) => k0 -> k1 -> k2 -> KrateSource
- opcode : scale
- syntax :
kscl scale kinput, kmax, kmin
- description :
Scales incoming value to user-definable range. Similar to scale object found in popular dataflow languages.
transegA :: [Irate] -> ArateSource
- opcode : transeg
- syntax :
ares transeg ia, idur, itype, ib [, idur2] [, itype] [, ic]... kres transeg ia, idur, itype, ib [, idur2] [, itype] [, ic]...
- description :
Constructs a user-definable envelope.