{-|
Copyright  :  (C) 2013-2016, University of Twente,
                  2016-2019, Myrtle Software Ltd,
                  2017     , Google Inc.,
                  2021-2023, QBayLogic B.V.
License    :  BSD2 (see the file LICENSE)
Maintainer :  QBayLogic B.V. <devops@qbaylogic.com>

Clash has synchronous 'Signal's in the form of:

@
'Signal' (dom :: 'Domain') a
@

Where /a/ is the type of the value of the 'Signal', for example /Int/ or /Bool/,
and /dom/ is the /clock-/ (and /reset-/) domain to which the memory elements
manipulating these 'Signal's belong.

The type-parameter, /dom/, is of the kind 'Domain' - a simple string. That
string refers to a single /synthesis domain/. A synthesis domain describes the
behavior of certain aspects of memory elements in it. More specifically, a
domain looks like:

@
'DomainConfiguration'
  { _name :: 'Domain'
  -- ^ Domain name
  , _period :: 'Clash.Promoted.Nat.Nat'
  -- ^ Clock period in /ps/
  , _activeEdge :: 'ActiveEdge'
  -- ^ Active edge of the clock
  , _resetKind :: 'ResetKind'
  -- ^ Whether resets are synchronous (edge-sensitive) or asynchronous (level-sensitive)
  , _initBehavior :: 'InitBehavior'
  -- ^ Whether the initial (or "power up") value of memory elements is
  -- unknown/undefined, or configurable to a specific value
  , _resetPolarity :: ResetPolarity
  -- ^ Whether resets are active high or active low
  }
@

Check the documentation of each of the types to see the various options Clash
provides. In order to specify a domain, an instance of 'KnownDomain' should be
made. Clash provides an implementation 'System' with some common options
chosen:

@
instance KnownDomain "System" where
  type KnownConf "System" = 'DomainConfiguration "System" 10000 'Rising 'Asynchronous 'Defined 'ActiveHigh
  knownDomain = SDomainConfiguration SSymbol SNat SRising SAsynchronous SDefined SActiveHigh
@

In words, \"System\" is a synthesis domain with a clock running with a period
of 10000 /ps/. Memory elements respond to the rising edge of the clock,
asynchronously to changes in their resets, and have defined power up values
if applicable.

In order to create a new domain, you don't have to instantiate it explicitly.
Instead, you can have 'createDomain' create a domain for you. You can also use
the same function to subclass existing domains.

* __NB__: \"Bad things\"™  happen when you actually use a clock period of @0@,
so do __not__ do that!
* __NB__: You should be judicious using a clock with period of @1@ as you can
never create a clock that goes any faster!
* __NB__: Whether 'System' has good defaults depends on your target platform.
Check out 'IntelSystem' and 'XilinxSystem' too!
-}

{-# LANGUAGE ConstraintKinds #-}
{-# LANGUAGE CPP #-}
{-# LANGUAGE ExplicitNamespaces #-}
{-# LANGUAGE FlexibleContexts #-}
{-# LANGUAGE GADTs #-}
{-# LANGUAGE MultiParamTypeClasses #-}
{-# LANGUAGE RankNTypes #-}

{-# LANGUAGE Trustworthy #-}

{-# OPTIONS_HADDOCK show-extensions #-}

module Clash.Signal
  ( -- * Synchronous signals
    Signal
  , BiSignalIn
  , BiSignalOut
  , BiSignalDefault(..)
    -- * Domain
  , Domain
  , sameDomain
  , KnownDomain(..)
  , KnownConfiguration
  , ActiveEdge(..)
  , SActiveEdge(..)
  , InitBehavior(..)
  , SInitBehavior(..)
  , ResetKind(..)
  , SResetKind(..)
  , ResetPolarity(..)
  , SResetPolarity(..)
  , DomainConfiguration(..)
  , SDomainConfiguration(..)
  -- ** Configuration type families
  , DomainPeriod
  , DomainActiveEdge
  , DomainResetKind
  , DomainInitBehavior
  , DomainResetPolarity
    -- *** Convenience types
    -- **** Simplifying
    -- $conveniencetypes

  , HasSynchronousReset
  , HasAsynchronousReset
  , HasDefinedInitialValues
    -- ** Default domains
  , System
  , XilinxSystem
  , IntelSystem
  , vSystem
  , vIntelSystem
  , vXilinxSystem
    -- ** Domain utilities
  , VDomainConfiguration(..)
  , vDomain
  , createDomain
  , knownVDomain
  , clockPeriod
  , activeEdge
  , resetKind
  , initBehavior
  , resetPolarity
    -- * Clock
  , Clock
  , DiffClock
  , periodToHz
  , hzToPeriod
#ifdef CLASH_MULTIPLE_HIDDEN
    -- ** Synchronization primitive
  , unsafeSynchronizer
#endif
    -- * Reset
  , Reset
  , unsafeToReset
  , unsafeFromReset
  , unsafeToActiveHigh
  , unsafeToActiveLow
  , unsafeFromActiveHigh
  , unsafeFromActiveLow
#ifdef CLASH_MULTIPLE_HIDDEN
  , convertReset
#endif
  , resetSynchronizer
  , resetGlitchFilter
  , holdReset
    -- * Enabling
  , Enable
  , toEnable
  , fromEnable
  , E.enableGen
    -- * Hidden clock, reset, and enable arguments
    -- $hiddenclockandreset

    -- ** Monomorphism restriction leads to surprising behavior
    -- $monomorphism

    -- ** Hidden clock
  , HiddenClock
  , hideClock
  , exposeClock
  , withClock
#ifdef CLASH_MULTIPLE_HIDDEN
  , exposeSpecificClock
  , withSpecificClock
#endif
  , hasClock
    -- ** Hidden reset
  , HiddenReset
  , hideReset
  , exposeReset
  , withReset
#ifdef CLASH_MULTIPLE_HIDDEN
  , exposeSpecificReset
  , withSpecificReset
#endif
  , hasReset
    -- ** Hidden enable
  , HiddenEnable
  , hideEnable
  , exposeEnable
  , withEnable
#ifdef CLASH_MULTIPLE_HIDDEN
  , exposeSpecificEnable
  , withSpecificEnable
#endif
  , hasEnable
    -- ** Hidden clock, reset, and enable
  , HiddenClockResetEnable
  , hideClockResetEnable
  , exposeClockResetEnable
  , withClockResetEnable
#ifdef CLASH_MULTIPLE_HIDDEN
  , exposeSpecificClockResetEnable
  , withSpecificClockResetEnable
#endif
  , SystemClockResetEnable
    -- * Basic circuit functions
  , andEnable
#ifdef CLASH_MULTIPLE_HIDDEN
  , andSpecificEnable
#endif
  , dflipflop
  , delay
  , delayMaybe
  , delayEn
  , register
  , regMaybe
  , regEn
  , mux
    -- * Simulation and testbench functions
  , clockGen
  , resetGen
  , resetGenN
  , systemClockGen
  , systemResetGen
    -- * Boolean connectives
  , (.&&.), (.||.)
    -- * Product/Signal isomorphism
  , Bundle(..)
  , EmptyTuple(..)
  , TaggedEmptyTuple(..)
    -- * Simulation functions (not synthesizable)
  , simulate
  , simulateB
  , simulateN
  , simulateWithReset
  , simulateWithResetN
  , runUntil
    -- ** lazy versions
  , simulate_lazy
  , simulateB_lazy
    -- ** Automaton
  , signalAutomaton
    -- * List \<-\> Signal conversion (not synthesizable)
  , sample
  , sampleN
  , sampleWithReset
  , sampleWithResetN
  , fromList
  , fromListWithReset
    -- ** lazy versions
  , sample_lazy
  , sampleN_lazy
  , fromList_lazy
    -- * QuickCheck combinators
  , testFor
    -- * Type classes
    -- ** 'Eq'-like
  , (.==.), (./=.)
    -- ** 'Ord'-like
  , (.<.), (.<=.), (.>=.), (.>.)
    -- * Bisignal functions
  , veryUnsafeToBiSignalIn
  , readFromBiSignal
  , writeToBiSignal
  , mergeBiSignalOuts

    -- * Internals
  , HiddenClockName
  , HiddenResetName
  , HiddenEnableName

    -- * Deprecated
  , unsafeFromHighPolarity
  , unsafeFromLowPolarity
  , unsafeToHighPolarity
  , unsafeToLowPolarity
  )
where

import           Control.Arrow.Transformer.Automaton (Automaton)
import           GHC.TypeLits          (type (<=))
import           Data.List             (uncons)
import           Data.Proxy            (Proxy(..))
import           Prelude
import           Test.QuickCheck       (Property, property)


#ifdef CLASH_MULTIPLE_HIDDEN
import           GHC.TypeLits          (AppendSymbol)
import           Clash.Class.HasDomain (WithSingleDomain)
#endif

import           Clash.Class.HasDomain (WithSpecificDomain)
import qualified Clash.Explicit.Signal as E
import qualified Clash.Explicit.Reset  as E
import           Clash.Explicit.Reset  (resetSynchronizer, resetGlitchFilter)
import           Clash.Explicit.Signal (systemClockGen, systemResetGen)
import           Clash.Hidden
import           Clash.Promoted.Nat    (SNat (..), snatToNum)
import           Clash.Signal.Bundle
  (Bundle (..), EmptyTuple(..), TaggedEmptyTuple(..))
import           Clash.Signal.BiSignal --(BisignalIn, BisignalOut, )
import           Clash.Signal.Internal hiding
  (sample, sample_lazy, sampleN, sampleN_lazy, simulate, simulate_lazy, testFor,
   signalAutomaton)
import           Clash.Signal.Internal.Ambiguous
  (knownVDomain, clockPeriod, activeEdge, resetKind, initBehavior, resetPolarity)
import           Clash.XException      (NFDataX, ShowX)

{- $setup
>>> :set -XFlexibleContexts -XTypeApplications
>>> :m -Prelude
>>> import Clash.Prelude
>>> import Clash.Promoted.Nat (SNat(..))
>>> import Clash.XException (printX)
>>> import Control.Applicative (liftA2)
>>> let oscillate = register False (not <$> oscillate)
>>> let count = regEn 0 oscillate (count + 1)
>>> :{
let sometimes1 = s where
      s = register Nothing (switch <$> s)
      switch Nothing = Just 1
      switch _       = Nothing
:}

>>> :{
let countSometimes = s where
      s     = regMaybe 0 (plusM (pure <$> s) sometimes1)
      plusM = liftA2 (liftA2 (+))
:}

-}

{- $conveniencetypes

If you want to write part of your Clash design as domain-polymorphic functions,
it can be practical to define a design-wide constraint synonym that captures the
characteristics of the clock domains of the design. Such a constraint synonym
can be used as a constraint on all domain-polymorphic functions in the design,
regardless of whether they actually need the constraints from this section.

@
type DesignDomain dom =
  ( 'HasSynchronousReset' dom
  , 'HasDefinedInitialValues' dom
  )

type DesignDomainHidden dom =
  ( DesignDomain dom
  , 'HiddenClockResetEnable' dom
  )

myFunc ::
  DesignDomainHidden dom =>
  'Signal' dom [...]
@

This way, you don't have to think about which constraints the function you're
writing has exactly, and the constraint is succinct.
-}

{- $hiddenclockandreset #hiddenclockandreset#
Clocks, resets and enables are by default implicitly routed to their components.
You can see from the type of a component whether it has hidden clock, reset or
enable arguments:

It has a hidden clock when it has a:

@
f :: 'HiddenClock' dom => ...
@

Constraint.

Or it has a hidden reset when it has a:

@
g :: 'HiddenReset' dom => ...
@

Constraint.

Or it has a hidden enable when it has a:

@
g :: 'HiddenEnable' dom => ...
@

Constraint.

Or it has a hidden clock argument, a hidden reset argument and a hidden enable
argument when it has a:

@
h :: 'HiddenClockResetEnable' dom  => ..
@

Constraint.

Given a component with explicit clock, reset and enable arguments, you can turn
them into hidden arguments using 'hideClock', 'hideReset', and 'hideEnable'. So
given a:

@
f :: Clock dom -> Reset dom -> Enable dom -> Signal dom a -> ...
@

You hide the clock and reset arguments by:

@
-- g :: 'HiddenClockResetEnable' dom  => Signal dom a -> ...
g = 'hideClockResetEnable' f
@

Or, alternatively, by:

@
-- h :: 'HiddenClockResetEnable' dom  => Signal dom a -> ...
h = f 'hasClock' 'hasReset' 'hasEnable'
@

== Assigning explicit clock, reset and enable arguments to hidden clocks, resets and enables

Given a component:

@
f :: 'HiddenClockResetEnable' dom
  => Signal dom Int
  -> Signal dom Int
@

which has hidden clock, reset and enable arguments, we expose those hidden
arguments so that we can explicitly apply them:

@
-- g :: Clock dom -> Reset dom -> Enable dom -> Signal dom Int -> Signal dom Int
g = 'exposeClockResetEnable' f
@

or, alternatively, by:

@
-- h :: Clock dom -> Reset dom -> Enable dom -> Signal dom Int -> Signal dom Int
h clk rst en = 'withClockResetEnable' clk rst en f
@

Similarly, there are 'exposeClock', 'exposeReset' and 'exposeEnable' to just
expose the hidden clock, the hidden reset or the hidden enable argument.

You will need to explicitly apply clocks and resets when you want to use
components such as PLLs:

@
topEntity
  :: Clock  System
  -> Reset  System
  -> Signal System Bit
  -> Signal System (BitVector 8)
topEntity clk rst key1 =
    let  (pllOut,pllRst) = 'Clash.Intel.ClockGen.altpllSync' clk rst
    in   'exposeClockResetEnable' leds pllOut pllRst enableGen
  where
    key1R  = isRising 1 key1
    leds   = mealy blinkerT (1, False, 0) key1R
@

or, using the alternative method:

@
topEntity
  :: Clock  System
  -> Reset  System
  -> Signal System Bit
  -> Signal System (BitVector 8)
topEntity clk rst key1 =
    let  (pllOut,pllRst) = 'Clash.Intel.ClockGen.altpllSync' clk rst
    in   'withClockResetEnable' pllOut pllRst enableGen leds
  where
    key1R  = isRising 1 key1
    leds   = mealy blinkerT (1, False, 0) key1R
@
-}

{- $monomorphism #monomorphism#

If you don't provide a type signature for a function, Haskell will infer one for
you. Sometimes this inferred type is less general than you would expect. This
can be due to the monomorphism restriction, which is a rather intricate
technical aspect of Haskell's type system. You don't need to understand it to
avoid the problems it creates with hidden parameters, though.

The @expose...@ and @with...@ functions for hidden clocks, resets, and enables
are intended to be used to resolve a function with hidden parameters into a
function without that hidden parameter. Put differently, 'exposeClock' and
'withClock' are not themselves used in a 'HiddenClock' context, and so on for
resets and enables. If the rule that they are not themselves in a @Hidden...@
context is observed, they will function as expected. No specific consideration
is needed in these cases.

However, the function 'andEnable' is explicitly designed to be used within a
'HiddenEnable' context. In such a situation, it is important to provide a type
signature for the component that is given to `andEnable` as an argument, and not
let Haskell infer one.

The use of 'andEnable' has an unfortunate interaction with Haskells monomorphism
restriction that can lead to very surprising behavior. All of the following also
applies to using 'exposeClock' and 'withClock' inside a 'HiddenClock' context,
and so on for resets and enables.

When you write a function

@
f :: HiddenClockResetEnable dom
  => Signal dom Bool
  -> Signal dom Int
  -> Signal dom Int
f en i = andEnable en g i -- BROKEN
 where
  g = register 0
@

you would intuitively think this has the following type for the local function @g@:

@
f :: forall dom
   . HiddenClockResetEnable dom
  => Signal dom Bool
  -> Signal dom Int
  -> Signal dom Int
f en i = andEnable en g i
 where
  g :: HiddenClockResetEnable dom => Signal dom Int -> Signal dom Int
  g = register 0
@

but instead, the monomorphism restriction will cause the following type to be inferred:

@
f :: forall dom
   . HiddenClockResetEnable dom
  => Signal dom Bool
  -> Signal dom Int
  -> Signal dom Int
f en i = andEnable en g i -- BROKEN
 where
  g :: Signal dom Int -> Signal dom Int
  g = register 0
@

The monomorphism restriction essentially misqualifies the implicit parameter as
polymorphism, and tries to remove the implicit parameter from the context of the
function's type. It /can/ do that because the outer scope already has a
'HiddenEnable' context. But by getting that implicit parameter of the enclosing
function as context, it also gets the value of the parameter of the enclosing
function. So the Enable line for @g@ is the Enable line of @f@, and the Enable
line produced by 'andEnable' that was intended to be connected to @g@ is not
connected to anything!

When using 'andEnable', you should always explicitly provide the type signature
for the component given to 'andEnable' as an argument, thereby avoiding
surprising inferred types. We don't advise you to turn off the monomorphism
restriction, as this may have undesirable consequences.

Note that the inferred type is not always incorrect. The following variant works
correctly:

@
f :: HiddenClockResetEnable dom
  => Signal dom Bool
  -> Signal dom Int
  -> Signal dom Int
f en i = andEnable en g i
 where
  g i = register 0 i
@

This is an instance of the very first example on
<https://wiki.haskell.org/Monomorphism_restriction HaskellWiki>, @f1@ (as
opposed to @f4@). The monomorphism restriction works differently for function
bindings and pattern bindings. Since @g@ here has a formal parameter, it is a
function binding, and the monomorphish restriction does not kick in. The code
works as expected. If a later code change removes the formal parameter, all of a
sudden the code silently disregards the @en@ signal! Adhering to the rule that
you should always explicitly provide the type signature for the component given
to 'andEnable' as an argument would have avoided this hard to debug problem.
-}

#ifdef CLASH_MULTIPLE_HIDDEN
type HiddenClockName dom = AppendSymbol dom "_clk"
type HiddenResetName dom = AppendSymbol dom "_rst"
type HiddenEnableName dom = AppendSymbol dom "_en"
#else
type HiddenClockName (dom :: Domain) = "clock"
type HiddenResetName (dom :: Domain) = "reset"
type HiddenEnableName (dom :: Domain) = "enable"
#endif

-- | A /constraint/ that indicates the component has a hidden 'Clock'
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
type HiddenClock dom =
  ( Hidden (HiddenClockName dom) (Clock dom)
  , KnownDomain dom )

-- | A /constraint/ that indicates the component needs a 'Reset'
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
type HiddenReset dom =
  ( Hidden (HiddenResetName dom) (Reset dom)
  , KnownDomain dom )

-- | A /constraint/ that indicates the component needs an 'Enable'
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
type HiddenEnable dom =
  ( Hidden (HiddenEnableName dom) (Enable dom)
  , KnownDomain dom )

-- | A /constraint/ that indicates the component needs a 'Clock', a 'Reset',
-- and an 'Enable' belonging to the same @dom@.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
type HiddenClockResetEnable dom  =
  ( HiddenClock dom
  , HiddenReset dom
  , HiddenEnable dom
  )

-- | A /constraint/ that indicates the component needs a 'Clock', a 'Reset',
-- and an 'Enable' belonging to the 'System' domain.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
type SystemClockResetEnable =
  ( Hidden (HiddenClockName System) (Clock System)
  , Hidden (HiddenResetName System) (Reset System)
  , Hidden (HiddenEnableName System) (Enable System)
  )


{- | Expose a hidden 'Clock' argument of a component, so it can be applied
explicitly.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single
domain. For example, this function will refuse when:

@
r ~ HiddenClock dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenClock dom => Signal dom a -> Signal dom a
@

If you want to expose a clock of a component working on multiple domains
(such as the first example), use 'exposeSpecificClock'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = exposeClock reg clockGen
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'exposeClock' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> sig = exposeClock @System reg clockGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
exposeClock
  :: forall dom  r
   .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     (HiddenClock dom => r)
  -- ^ The component with a hidden clock
  -> (KnownDomain dom => Clock dom -> r)
  -- ^ The component with its clock argument exposed
exposeClock = \f clk -> exposeSpecificClock (const f) clk (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE exposeClock #-}

-- Note [Going from WithSingleDomain to WithSpecificDomain]
--
-- Functions like 'exposeSpecificClock' have a 'WithSpecificDomain dom r'
-- constraint on the component with type 'r' that's passed to them. This
-- requires 'dom' to be present in 'r' at the time the function is used,
-- otherwise it will not type-check.
--
-- Functions like 'exposeClock' have a 'WithSingleDomain dom r' constraint, so
-- it is known that the domain 'dom' is indeed in 'r'. So we can safely
-- introduce 'dom' into the type passed to 'exposeSpecificClock'. By introducing
-- 'dom' into the type, the type checker can find the 'dom' when it type-checks
-- that the use of 'exposeSpecificClock' in 'exposeClock' satisies the
-- 'WithSpecificDomain dom r' constraint.
--
-- So given:
--
--     exposeClock
--       :: forall dom r
--        . WithSingleDomain dom r
--       => (HiddenClock dom => r)
--       -> (KnownDomain dom => Clock dom -> r)
--     exposeClock = \f clk -> exposeSpecificClock (const f) clk (Proxy @dom)
--
-- The type of 'exposeSpecificClock' as called from 'exposeClock' could be
-- written something like:
--
--     exposeSpecificClock
--       :: ( WithSpecificDomain dom s
--          , s ~ (Proxy dom -> r)
--          )
--       => (HiddenClock dom => Proxy dom -> r)
--       -> (KnownDomain dom => Clock dom -> Proxy dom -> r)
--
-- The type-checker can now find 'dom' in the 'Proxy', so it type-checks.
--
-- The argument
--
--     (HiddenClock dom => Proxy dom -> r)
--
-- is filled in as 'const f', consuming the 'Proxy' before passing on to 'f'.
--
-- In the resulting
--
--     (KnownDomain dom => Clock dom -> Proxy dom -> r)
--
-- the filled in values are 'clk' and 'Proxy @dom', leaving 'r'.

{- | Expose a hidden 'Clock' argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to 'exposeClock', callers should explicitly state what the clock
domain is. See the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'exposeSpecificClock' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = exposeSpecificClock @System reg clockGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'exposeSpecificClock' @@dom reg 'clockGen'
@
#endif
-}
exposeSpecificClock
   :: forall dom  r
   . WithSpecificDomain dom r
  => (HiddenClock dom => r)
  -- ^ The component with a hidden clock
  -> (KnownDomain dom => Clock dom -> r)
  -- ^ The component with its clock argument exposed
exposeSpecificClock = \f clk -> expose @(HiddenClockName dom) f clk
{-# INLINE exposeSpecificClock #-}

-- | Hide the 'Clock' argument of a component, so it can be routed implicitly.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hideClock
  :: forall dom r
   . HiddenClock dom
  => (Clock dom -> r)
  -- ^ Function whose clock argument you want to hide
  -> r
hideClock = \f -> f (fromLabel @(HiddenClockName dom))
{-# INLINE hideClock #-}

{- | Connect an explicit 'Clock' to a function with a hidden 'Clock'.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenClock dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenClock dom => Signal dom a -> Signal dom a
@

If you want to connect a clock to a component working on multiple domains
(such as the first example), use 'withSpecificClock'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = withClock clockGen reg
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'withClock' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> sig = withClock @System clockGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
withClock
  :: forall dom r
   .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     KnownDomain dom
  => Clock dom
  -- ^ The 'Clock' we want to connect
  -> (HiddenClock dom => r)
  -- ^ The function with a hidden 'Clock' argument
  -> r
withClock clk f = withSpecificClock clk (const f) (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE withClock #-}

{- | Connect an explicit 'Clock' to a function with a hidden 'Clock'. This
function can be used on components with multiple domains. As opposed to
'withClock', callers should explicitly state what the clock domain is. See
the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'withSpecificClock' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = withSpecificClock @System clockGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'withSpecificClock' @@dom 'clockGen' reg
@
#endif
-}
withSpecificClock
  :: forall dom r
   . (KnownDomain dom, WithSpecificDomain dom r)
  => Clock dom
  -- ^ The 'Clock' we want to connect
  -> (HiddenClock dom => r)
  -- ^ The function with a hidden 'Clock' argument
  -> r
withSpecificClock = \clk f -> expose @(HiddenClockName dom) f clk
{-# INLINE withSpecificClock #-}

-- | Connect a hidden 'Clock' to an argument where a normal 'Clock' argument
-- was expected.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hasClock
  :: forall dom
   . HiddenClock dom
  => Clock dom
hasClock = fromLabel @(HiddenClockName dom)
{-# INLINE hasClock #-}

{- | Expose a hidden 'Reset' argument of a component, so it can be applied
explicitly.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenReset dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenReset dom => Signal dom a -> Signal dom a
@

If you want to expose a reset of a component working on multiple domains
(such as the first example), use 'exposeSpecificReset'.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#endif
=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = exposeReset reg resetGen
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'exposeReset' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> sig = exposeReset @System reg resetGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
exposeReset
  :: forall dom r
   .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     (HiddenReset dom => r)
  -- ^ The component with a hidden reset
  -> (KnownDomain dom => Reset dom -> r)
  -- ^ The component with its reset argument exposed
exposeReset = \f rst -> exposeSpecificReset (const f) rst (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE exposeReset #-}

{- | Expose a hidden 'Reset' argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to 'exposeReset', callers should explicitly state what the reset
domain is. See the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'exposeSpecificReset' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = exposeSpecificReset @System reg resetGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'exposeSpecificReset' @@dom reg 'resetGen'
@
#endif
-}
exposeSpecificReset
  :: forall dom r
   . WithSpecificDomain dom r
  => (HiddenReset dom => r)
  -- ^ The component with a hidden reset
  -> (KnownDomain dom => Reset dom -> r)
  -- ^ The component with its reset argument exposed
exposeSpecificReset = \f rst -> expose @(HiddenResetName dom) f rst
{-# INLINE exposeSpecificReset #-}

-- | Hide the 'Reset' argument of a component, so it can be routed implicitly.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hideReset
  :: forall dom r
   . HiddenReset dom
  => (Reset dom -> r)
  -- ^ Component whose reset argument you want to hide
  -> r
hideReset = \f -> f (fromLabel @(HiddenResetName dom))
{-# INLINE hideReset #-}

{- | Connect an explicit 'Reset' to a function with a hidden 'Reset'.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenReset dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenReset dom => Signal dom a -> Signal dom a
@

If you want to connect a reset to a component working on multiple domains
(such as the first example), use 'withSpecificReset'.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#endif
=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = withReset resetGen reg
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'withReset' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> sig = withReset @System resetGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
withReset
  :: forall dom r
   .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     KnownDomain dom
  => Reset dom
  -- ^ The 'Reset' we want to connect
  -> (HiddenReset dom => r)
  -- ^ The function with a hidden 'Reset' argument
  -> r
withReset = \rst f -> expose @(HiddenResetName dom) f rst
{-# INLINE withReset #-}

{- | Connect an explicit 'Reset' to a function with a hidden 'Reset'. This
function can be used on components with multiple domains. As opposed to
'withReset', callers should explicitly state what the reset domain is. See
the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'withSpecificReset' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = withSpecificReset @System resetGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'withSpecificReset' @@dom 'resetGen' reg
@
#endif
-}
withSpecificReset
  :: forall dom r
   . (KnownDomain dom, WithSpecificDomain dom r)
  => Reset dom
  -- ^ The 'Reset' we want to connect
  -> (HiddenReset dom => r)
  -- ^ The function with a hidden 'Reset' argument
  -> r
withSpecificReset = \rst f -> expose @(HiddenResetName dom) f rst
{-# INLINE withSpecificReset #-}

-- | Connect a hidden 'Reset' to an argument where a normal 'Reset' argument
-- was expected.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hasReset
  :: forall dom
   . HiddenReset dom
  => Reset dom
hasReset = fromLabel @(HiddenResetName dom)
{-# INLINE hasReset #-}

{- | Expose a hidden 'Enable' argument of a component, so it can be applied
explicitly.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenEnable dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenEnable dom => Signal dom a -> Signal dom a
@

If you want to expose a enable of a component working on multiple domains
(such as the first example), use 'exposeSpecificEnable'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = exposeEnable reg enableGen
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'exposeEnable' to work on 'System' (hence 'sampleN' not needing an
explicit domain later):

>>> reg = register 5 (reg + 1)
>>> sig = exposeEnable @System reg enableGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
exposeEnable
  :: forall dom  r .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     (HiddenEnable dom => r)
  -- ^ The component with a hidden enable
  -> (KnownDomain dom => Enable dom -> r)
  -- ^ The component with its enable argument exposed
exposeEnable = \f gen -> exposeSpecificEnable (const f) gen (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE exposeEnable #-}

{- | Expose a hidden 'Enable' argument of a component, so it can be applied
explicitly. This function can be used on components with multiple domains.
As opposed to 'exposeEnable', callers should explicitly state what the enable
domain is. See the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'exposeSpecificEnable' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = exposeSpecificEnable @System reg enableGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'exposeSpecificEnable' @@dom reg 'enableGen'
@
#endif
-}
exposeSpecificEnable
  :: forall dom r
   . WithSpecificDomain dom r
  => (HiddenEnable dom => r)
  -- ^ The component with a hidden enable
  -> (KnownDomain dom => Enable dom -> r)
  -- ^ The component with its enable argument exposed
exposeSpecificEnable = \f gen -> expose @(HiddenEnableName dom) f gen
{-# INLINE exposeSpecificEnable #-}

-- | Hide the 'Enable' argument of a component, so it can be routed implicitly.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hideEnable
  :: forall dom r
   . HiddenEnable dom
  => (Enable dom -> r)
  -- ^ Component whose enable argument you want to hide
  -> r
hideEnable = \f -> f (fromLabel @(HiddenEnableName dom))
{-# INLINE hideEnable #-}

{- | Connect an explicit 'Enable' to a function with a hidden 'Enable'.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenEnable dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenEnable dom => Signal dom a -> Signal dom a
@

If you want to connect a enable to a component working on multiple domains
(such as the first example), use 'withSpecificEnable'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = withEnable enableGen reg
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'withEnable' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> sig = withEnable @System enableGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
withEnable
  :: forall dom r
   . KnownDomain dom
#ifdef CLASH_MULTIPLE_HIDDEN
  => WithSingleDomain dom r
#endif
  => Enable dom
  -- ^ The 'Enable' we want to connect
  -> (HiddenEnable dom => r)
  -- ^ The function with a hidden 'Enable' argument
  -> r
withEnable = \gen f -> expose @(HiddenEnableName dom) f gen
{-# INLINE withEnable #-}

{- | Connect an explicit 'Enable' to a function with a hidden 'Enable'. This
function can be used on components with multiple domains. As opposed to
'withEnable', callers should explicitly state what the enable domain is. See
the examples for more information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'withSpecificEnable' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = withSpecificEnable @System enableGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'withSpecificEnable' @@dom 'enableGen' reg
@
#endif
-}
withSpecificEnable
  :: forall dom r
   . (KnownDomain dom, WithSpecificDomain dom r)
  => Enable dom
  -- ^ The 'Enable' we want to connect
  -> (HiddenEnable dom => r)
  -- ^ The function with a hidden 'Enable' argument
  -> r
withSpecificEnable = \gen f -> expose @(HiddenEnableName dom) f gen
{-# INLINE withSpecificEnable #-}

-- | Connect a hidden 'Enable' to an argument where a normal 'Enable' argument
-- was expected.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hasEnable
  :: forall dom
   . HiddenEnable dom
  => Enable dom
hasEnable = fromLabel @(HiddenEnableName dom)
{-# INLINE hasEnable #-}

{- | Merge enable signal with signal of bools by applying the boolean AND
operation.

__NB: The component given to 'andEnable' as an argument needs an explicit type signature.__
Please read [Monomorphism restriction leads to surprising
behavior](#monomorphism).

The component whose enable is modified will only be enabled when both the
encompassing 'HiddenEnable' and the 'Signal' @dom@ 'Bool' are asserted.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single
domain. For example, this function will refuse when:

@
r ~ HiddenEnable dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenEnable dom => Signal dom a -> Signal dom a
@

If you want to merge an enable of a component working on multiple domains
(such as the first example), use 'andSpecificEnable'.
#endif

<#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> f en = andEnable en reg
>>> sampleN @System 10 (f (riseEvery d2))
[5,5,5,6,6,7,7,8,8,9]

Force 'andEnable' to work on 'System' (hence 'sampleN' not needing an explicit
domain later):

>>> reg = register 5 (reg + 1)
>>> f en = andEnable @System en reg
>>> sampleN 10 (f (riseEvery d2))
[5,5,5,6,6,7,7,8,8,9]
-}
andEnable
  :: forall dom r
   . HiddenEnable dom
#ifdef CLASH_MULTIPLE_HIDDEN
  => WithSingleDomain dom r
#endif
  => Signal dom Bool
  -- ^ The signal to AND with
  -> (HiddenEnable dom => r)
  -- ^ The component whose enable is modified
  -> r
andEnable = \en f -> andSpecificEnable en (const f) (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE andEnable #-}

#ifdef CLASH_MULTIPLE_HIDDEN
{- | Merge enable signal with signal of bools by applying the boolean AND
operation.

__NB: The component given to 'andSpecificEnable' as an argument needs an explicit type signature.__
Please read [Monomorphism restriction leads to
surprising behavior](#monomorphism).

The component whose enable is modified will only be enabled when both the
encompassing 'HiddenEnable' and the 'Signal' @dom@ 'Bool' are asserted.

This function can be used on components with multiple domains. As opposed to
'andEnable', callers should explicitly state what the enable domain is. See the
examples for more information.

<#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
'andSpecificEnable' can only be used when it can find the specified domain
in /r/:

>>> reg = register @System 5 (reg + 1)
>>> f en = andSpecificEnable @System en reg
>>> sampleN 10 (f (riseEvery d2))
[5,5,5,6,6,7,7,8,8,9]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
f en = 'andSpecificEnable' @@dom en reg
@
-}
#endif
andSpecificEnable
  :: forall dom r
   . ( HiddenEnable dom
     , WithSpecificDomain dom r)
  => Signal dom Bool
  -- ^ The signal to AND with
  -> (HiddenEnable dom => r)
  -- ^ The component whose enable is modified
  -> r
andSpecificEnable = \en f -> andSpecificEnable0 hasEnable en f
 where
  andSpecificEnable0
    :: Enable dom
    -> Signal dom Bool
    -> (HiddenEnable dom => r)
    -> r
  andSpecificEnable0 gen en f =
    let en0 = E.andEnable gen en
    in withSpecificEnable @dom en0 f
{-# INLINE andSpecificEnable #-}

{- | Expose hidden 'Clock', 'Reset', and 'Enable' arguments of a component, so
they can be applied explicitly.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenClockResetEnable dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenClockResetEnable dom => Signal dom a -> Signal dom a
@

If you want to expose a clock, reset, and enable of a component working on
multiple domains (such as the first example), use 'exposeSpecificClockResetEnable'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = exposeClockResetEnable reg clockGen resetGen enableGen
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'exposeClockResetEnable' to work on 'System' (hence 'sampleN' not needing
an explicit domain later):

>>> reg = register 5 (reg + 1)
>>> sig = exposeClockResetEnable @System reg clockGen resetGen enableGen
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Usage in a testbench context:

@
topEntity :: Vec 2 (Vec 3 (Unsigned 8)) -> Vec 6 (Unsigned 8)
topEntity = concat

testBench :: Signal System Bool
testBench = done
  where
    testInput      = pure ((1 :> 2 :> 3 :> Nil) :> (4 :> 5 :> 6 :> Nil) :> Nil)
    expectedOutput = outputVerifier' ((1:>2:>3:>4:>5:>6:>Nil):>Nil)
    done           = exposeClockResetEnable (expectedOutput (topEntity \<\$> testInput)) clk rst en
    clk            = tbSystemClockGen (not <\$\> done)
    rst            = systemResetGen
    en             = enableGen
@
-}
exposeClockResetEnable
  :: forall dom r .
#ifdef CLASH_MULTIPLE_HIDDEN
     WithSingleDomain dom r =>
#endif
     (HiddenClockResetEnable dom => r)
  -- ^ The component with hidden clock, reset, and enable arguments
  -> (KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r)
  -- ^ The component with its clock, reset, and enable arguments exposed
exposeClockResetEnable =
  \f clk rst en ->
    exposeSpecificClock (exposeSpecificReset (exposeEnable f)) clk rst en
{-# INLINE exposeClockResetEnable #-}

#ifdef CLASH_MULTIPLE_HIDDEN
-- | Expose hidden 'Clock', 'Reset', and 'Enable' arguments of a component, so
-- they can be applied explicitly. This function can be used on components with
-- multiple domains. As opposed to 'exposeClockResetEnable', callers should
-- explicitly state what the domain is. See the examples for more information.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
--
-- === __Example__
-- 'exposeSpecificClockResetEnable' can only be used when it can find the
-- specified domain in /r/:
--
-- >>> reg = register @System 5 (reg + 1)
-- >>> sig = exposeSpecificClockResetEnable @System reg clockGen resetGen enableGen
-- >>> sampleN 10 sig
-- [5,5,6,7,8,9,10,11,12,13]
--
-- Type variables work too, if they are in scope. For example:
--
-- @
-- reg = 'register' @@dom 5 (reg + 1)
-- sig = exposeSpecificClockResetEnable @@dom reg 'clockGen' 'resetGen' 'enableGen'
-- @
--
exposeSpecificClockResetEnable
  :: forall dom r
   . WithSpecificDomain dom r
  => (HiddenClockResetEnable dom => r)
  -- ^ The function with hidden 'Clock', 'Reset', and 'Enable' arguments
  -> (KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r)
  -- ^ The component with its 'Clock', 'Reset', and 'Enable' arguments exposed
exposeSpecificClockResetEnable =
  \f clk rst en ->
    exposeSpecificClock (exposeSpecificReset (exposeSpecificEnable f)) clk rst en
{-# INLINE exposeSpecificClockResetEnable #-}
#endif

-- | Hide the 'Clock', 'Reset', and 'Enable' arguments of a component, so they
-- can be routed implicitly.
--
-- <Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>
hideClockResetEnable
  :: forall dom r
   . HiddenClockResetEnable dom
  => (KnownDomain dom => Clock dom -> Reset dom -> Enable dom -> r)
  -- ^ Component whose clock, reset, and enable argument you want to hide
  -> r
hideClockResetEnable =
  \f ->
    f
      (fromLabel @(HiddenClockName dom))
      (fromLabel @(HiddenResetName dom))
      (fromLabel @(HiddenEnableName dom))
{-# INLINE hideClockResetEnable #-}

{- | Connect an explicit 'Clock', 'Reset', and 'Enable' to a function with a
hidden 'Clock', 'Reset', and 'Enable'.

#ifdef CLASH_MULTIPLE_HIDDEN
This function can only be used on components with a single domain. For
example, this function will refuse when:

@
r ~ HiddenClockResetEnable dom1 => Signal dom1 a -> Signal dom2 a
@

But will work when:

@
r ~ HiddenClockResetEnable dom => Signal dom a -> Signal dom a
@

If you want to connect a clock, reset, and enable to a component working on
multiple domains (such as the first example), use
'withSpecificClockResetEnable'.

#endif
<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

=== __Example__
Usage with a /polymorphic/ domain:

>>> reg = register 5 (reg + 1)
>>> sig = withClockResetEnable clockGen resetGen enableGen reg
>>> sampleN @System 10 sig
[5,5,6,7,8,9,10,11,12,13]

Force 'withClockResetEnable' to work on 'System' (hence 'sampleN' not needing
an explicit domain later):

>>> reg = register 5 (reg + 1)
>>> sig = withClockResetEnable @System clockGen resetGen enableGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]
-}
withClockResetEnable
  :: forall dom r
   . KnownDomain dom
#ifdef CLASH_MULTIPLE_HIDDEN
  => WithSingleDomain dom r
#endif
  => Clock dom
  -- ^ The 'Clock' we want to connect
  -> Reset dom
  -- ^ The 'Reset' we want to connect
  -> Enable dom
  -- ^ The 'Enable' we want to connect
  -> (HiddenClockResetEnable dom => r)
  -- ^ The function with a hidden 'Clock', hidden 'Reset', and hidden
  -- 'Enable' argument
  -> r
withClockResetEnable =
  \clk rst en f -> withSpecificClockResetEnable clk rst en (const f) (Proxy @dom)
-- See Note [Going from WithSingleDomain to WithSpecificDomain]
{-# INLINE withClockResetEnable #-}

{- | Connect an explicit 'Clock', 'Reset', and 'Enable' to a function with
hidden 'Clock', 'Reset', and 'Enable' arguments. This function can be used on
components with multiple domains. As opposed to 'withClockResetEnable',
callers should explicitly state what the domain is. See the examples for more
information.

<Clash-Signal.html#hiddenclockandreset Click here to read more about hidden clocks, resets, and enables>

#ifdef CLASH_MULTIPLE_HIDDEN
=== __Example__
'withSpecificClockResetEnable' can only be used when it can find the
specified domain in /r/:

>>> reg = register @System 5 (reg + 1)
>>> sig = withSpecificClockResetEnable @System clockGen resetGen enableGen reg
>>> sampleN 10 sig
[5,5,6,7,8,9,10,11,12,13]

Type variables work too, if they are in scope. For example:

@
reg = 'register' @@dom 5 (reg + 1)
sig = 'withSpecificClockResetEnable' @@dom 'clockGen' 'resetGen' 'enableGen' reg
@
#endif
-}
withSpecificClockResetEnable
  :: forall dom r
   . (KnownDomain dom, WithSpecificDomain dom r)
  => Clock dom
  -- ^ The 'Clock' we want to connect
  -> Reset dom
  -- ^ The 'Reset' we want to connect
  -> Enable dom
  -- ^ The 'Enable' we want to connect
  -> (HiddenClockResetEnable dom => r)
  -- ^ The function with hidden 'Clock', 'Reset', and 'Enable' arguments
  -> r
withSpecificClockResetEnable =
  \clk rst en f -> withSpecificClock clk (withSpecificReset rst (withSpecificEnable en f))
{-# INLINE withSpecificClockResetEnable #-}

-- * Basic circuit functions

-- | Special version of 'delay' that doesn't take enable signals of any kind.
-- Initial value will be undefined.
dflipflop
  :: forall dom a
   . ( HiddenClock dom
     , NFDataX a )
  => Signal dom a
  -> Signal dom a
dflipflop =
  E.dflipflop (fromLabel @(HiddenClockName dom))
{-# INLINE dflipflop #-}

-- | 'delay' @dflt@ @s@ delays the values in 'Signal' @s@ for once cycle, the
-- value at time 0 is /dflt/.
--
-- >>> sampleN @System 3 (delay 0 (fromList [1,2,3,4]))
-- [0,1,2]
delay
  :: forall dom a
   . ( NFDataX a
     , HiddenClock dom
     , HiddenEnable dom  )
  => a
  -- ^ Initial value
  -> Signal dom a
  -- ^ Signal to delay
  -> Signal dom a
delay = \dflt i ->
  delay#
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenEnableName dom))
    dflt
    i
{-# INLINE delay #-}

-- | Version of 'delay' that only updates when its second argument is a 'Just'
-- value.
--
-- >>> let input = fromList [Just 1, Just 2, Nothing, Nothing, Just 5, Just 6, Just (7::Int)]
-- >>> sampleN @System 7 (delayMaybe 0 input)
-- [0,1,2,2,2,5,6]
delayMaybe
  :: forall dom a
   . ( NFDataX a
     , HiddenClock dom
     , HiddenEnable dom  )
  => a
  -- ^ Initial value
  -> Signal dom (Maybe a)
  -> Signal dom a
delayMaybe = \dflt i ->
  E.delayMaybe
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenEnableName dom))
    dflt
    i
{-# INLINE delayMaybe #-}

-- | Version of 'delay' that only updates when its second argument is asserted.
--
-- >>> let input = fromList [1,2,3,4,5,6,7::Int]
-- >>> let enable = fromList [True,True,False,False,True,True,True]
-- >>> sampleN @System 7 (delayEn 0 enable input)
-- [0,1,2,2,2,5,6]
delayEn
  :: forall dom a
   . ( NFDataX a
     , HiddenClock dom
     , HiddenEnable dom  )
  => a
  -- ^ Initial value
  -> Signal dom Bool
  -- ^ Enable
  -> Signal dom a
  -> Signal dom a
delayEn = \dflt en i ->
  E.delayEn
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenEnableName dom))
    dflt
    en
    i
{-# INLINE delayEn #-}

-- | 'register' @i s@ delays the values in 'Signal' @s@ for one cycle, and sets
-- the value at time 0 to @i@
--
-- >>> sampleN @System 5 (register 8 (fromList [1,1,2,3,4]))
-- [8,8,1,2,3]
register
  :: forall dom a
   . ( HiddenClockResetEnable dom
     , NFDataX a )
  => a
  -- ^ Reset value. 'register' outputs the reset value when the reset is active.
  -- If the domain has initial values enabled, the reset value will also be the
  -- initial value.
  -> Signal dom a
  -> Signal dom a
register = \i s ->
  E.register
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenResetName dom))
    (fromLabel @(HiddenEnableName dom))
    i
    s
{-# INLINE register #-}
infixr 3 `register`

-- | Version of 'register' that only updates its content when its second
-- argument is a 'Just' value. So given:
--
-- @
-- sometimes1 = s where
--   s = 'register' Nothing (switch '<$>' s)
--
--   switch Nothing = Just 1
--   switch _       = Nothing
--
-- countSometimes = s where
--   s     = 'regMaybe' 0 (plusM ('pure' '<$>' s) sometimes1)
--   plusM = 'Control.Applicative.liftA2' (liftA2 (+))
-- @
--
-- We get:
--
-- >>> sampleN @System 9 sometimes1
-- [Nothing,Nothing,Just 1,Nothing,Just 1,Nothing,Just 1,Nothing,Just 1]
-- >>> sampleN @System 9 countSometimes
-- [0,0,0,1,1,2,2,3,3]
regMaybe
  :: forall dom a
   . ( HiddenClockResetEnable dom
     , NFDataX a )
  => a
  -- ^ Reset value. 'regMaybe' outputs the reset value when the reset is active.
  -- If the domain has initial values enabled, the reset value will also be the
  -- initial value.
  -> Signal dom (Maybe a)
  -> Signal dom a
regMaybe = \initial iM ->
  E.regMaybe
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenResetName dom))
    (fromLabel @(HiddenEnableName dom))
    initial
    iM
{-# INLINE regMaybe #-}
infixr 3 `regMaybe`

-- | Version of 'register' that only updates its content when its second argument
-- is asserted. So given:
--
-- @
-- oscillate = 'register' False ('not' '<$>' oscillate)
-- count     = 'regEn' 0 oscillate (count + 1)
-- @
--
-- We get:
--
-- >>> sampleN @System 9 oscillate
-- [False,False,True,False,True,False,True,False,True]
-- >>> sampleN @System 9 count
-- [0,0,0,1,1,2,2,3,3]
regEn
  :: forall dom a
   . ( HiddenClockResetEnable dom
     , NFDataX a )
  => a
  -- ^ Reset value. 'regEn' outputs the reset value when the reset is active.
  -- If the domain has initial values enabled, the reset value will also be the
  -- initial value.
  -> Signal dom Bool
  -> Signal dom a
  -> Signal dom a
regEn = \initial en i ->
  E.regEn
    (fromLabel @(HiddenClockName dom))
    (fromLabel @(HiddenResetName dom))
    (fromLabel @(HiddenEnableName dom))
    initial
    en
    i
{-# INLINE regEn #-}

-- * Signal -> List conversion

-- | Get an infinite list of samples from a 'Signal'
--
-- The elements in the list correspond to the values of the 'Signal'
-- at consecutive clock cycles
--
-- > sample s == [s0, s1, s2, s3, ...
--
-- If the given component has not yet been given a clock, reset, or enable
-- line, 'sample' will supply them. The reset will be asserted for a single
-- cycle. 'sample' will not drop the value produced by the circuit while
-- the reset was asserted. If you want this, or if you want more than a
-- single cycle reset, consider using 'sampleWithReset'.
--
-- __NB__: This function is not synthesizable
sample
  :: forall dom a
   . ( KnownDomain dom
     , NFDataX a )
  => (HiddenClockResetEnable dom  => Signal dom a)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sample s =
  E.sample (exposeClockResetEnable @dom s clockGen resetGen enableGen)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE sample #-}

-- | Get a list of /n/ samples from a 'Signal'
--
-- The elements in the list correspond to the values of the 'Signal'
-- at consecutive clock cycles
--
-- > sampleN @System 3 s == [s0, s1, s2]
--
-- If the given component has not yet been given a clock, reset, or enable
-- line, 'sampleN' will supply them. The reset will be asserted for a single
-- cycle. 'sampleN' will not drop the value produced by the circuit while
-- the reset was asserted. If you want this, or if you want more than a
-- single cycle reset, consider using 'sampleWithResetN'.
--
-- __NB__: This function is not synthesizable
sampleN
  :: forall dom a
   . ( KnownDomain dom
     , NFDataX a )
  => Int
  -- ^ Number of samples to produce
  -> (HiddenClockResetEnable dom => Signal dom a)
  -- ^ 'Signal' to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sampleN n s0 =
  let s1 = exposeClockResetEnable @dom s0 clockGen resetGen enableGen in
  E.sampleN n s1
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE sampleN #-}

-- | Get an infinite list of samples from a 'Signal', while asserting the reset
-- line for /m/ clock cycles. 'sampleWithReset' does not return the first /m/
-- cycles, i.e., when the reset is asserted.
--
-- __NB__: This function is not synthesizable
sampleWithReset
  :: forall dom a m
   . ( KnownDomain dom
     , NFDataX a
     , 1 <= m )
  => SNat m
  -- ^ Number of cycles to assert the reset
  -> (HiddenClockResetEnable dom => Signal dom a)
  -- ^ 'Signal' to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sampleWithReset nReset f0 =
  let f1 = exposeClockResetEnable f0 clockGen (resetGenN @dom nReset) enableGen in
  drop (snatToNum nReset) (E.sample f1)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE sampleWithReset #-}

-- | Get a list of /n/ samples from a 'Signal', while asserting the reset line
-- for /m/ clock cycles. 'sampleWithReset' does not return the first /m/ cycles,
-- i.e., while the reset is asserted.
--
-- __NB__: This function is not synthesizable
sampleWithResetN
  :: forall dom a m
   . ( KnownDomain dom
     , NFDataX a
     , 1 <= m )
  => SNat m
  -- ^ Number of cycles to assert the reset
  -> Int
  -- ^ Number of samples to produce
  -> (HiddenClockResetEnable dom => Signal dom a)
  -- ^ 'Signal' to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sampleWithResetN nReset nSamples f =
  take nSamples (sampleWithReset nReset f)

-- | /Lazily/ get an infinite list of samples from a 'Signal'
--
-- The elements in the list correspond to the values of the 'Signal'
-- at consecutive clock cycles
--
-- > sample s == [s0, s1, s2, s3, ...
--
-- If the given component has not yet been given a clock, reset, or enable
-- line, 'sample_lazy' will supply them. The reset will be asserted for a
-- single cycle. 'sample_lazy' will not drop the value produced by the
-- circuit while the reset was asserted.
--
-- __NB__: This function is not synthesizable
sample_lazy
  :: forall dom a
   . KnownDomain dom
  => (HiddenClockResetEnable dom  => Signal dom a)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sample_lazy s =
  E.sample_lazy (exposeClockResetEnable @dom s clockGen resetGen enableGen)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE sample_lazy #-}

-- | Lazily get a list of /n/ samples from a 'Signal'
--
-- The elements in the list correspond to the values of the 'Signal'
-- at consecutive clock cycles
--
-- > sampleN @System 3 s == [s0, s1, s2]
--
-- If the given component has not yet been given a clock, reset, or enable
-- line, 'sampleN_lazy' will supply them. The reset will be asserted for a
-- single cycle. 'sampleN_lazy' will not drop the value produced by the
-- circuit while the reset was asserted.
--
-- __NB__: This function is not synthesizable
sampleN_lazy
  :: forall dom a
   . KnownDomain dom
  => Int
  -> (HiddenClockResetEnable dom  => Signal dom a)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
sampleN_lazy n s =
  E.sampleN_lazy n (exposeClockResetEnable @dom s clockGen resetGen enableGen)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE sampleN_lazy #-}

-- * Simulation functions

-- | Simulate a (@'Signal' a -> 'Signal' b@) function given a list of samples
-- of type /a/
--
-- >>> simulate @System (register 8) [1, 2, 3]
-- [8,1,2,3...
-- ...
--
-- Where 'System' denotes the /domain/ to simulate on. The reset line is
-- asserted for a single cycle. The first value is therefore supplied twice to
-- the circuit: once while reset is high, and once directly after. The first
-- /output/ value (the value produced while the reset is asserted) is dropped.
--
-- If you only want to simulate a finite number of samples, see 'simulateN'. If
-- you need the reset line to be asserted for more than one cycle or if you
-- need a custom reset value, see 'simulateWithReset' and 'simulateWithResetN'.
--
-- __NB__: This function is not synthesizable
simulate
  :: forall dom a b
   . ( KnownDomain dom
     , NFDataX a
     , NFDataX b )
  => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b)
  -- ^ Circuit to simulate, whose source potentially has a hidden clock, reset,
  -- and/or enable.
  -> [a]
  -> [b]
simulate f as = simulateWithReset (SNat @1) rval f as
  where
    rval = maybe (error "simulate: no stimuli") fst (uncons as)
{-# INLINE simulate #-}

-- | Same as 'simulate', but only sample the first /Int/ output values.
--
-- __NB__: This function is not synthesizable
simulateN
  :: forall dom a b
   . ( KnownDomain dom
     , NFDataX a
     , NFDataX b )
  => Int
  -- ^ Number of cycles to simulate (excluding cycle spent in reset)
  -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
  -> [b]
simulateN n f as = simulateWithResetN (SNat @1) rval n f as
  where
    rval = maybe (error "simulate: no stimuli") fst (uncons as)
{-# INLINE simulateN #-}

-- | Same as 'simulate', but with the reset line asserted for /n/ cycles. Similar
-- to 'simulate', 'simulateWithReset' will drop the output values produced while
-- the reset is asserted. While the reset is asserted, the reset value /a/ is
-- supplied to the circuit.
simulateWithReset
  :: forall dom a b m
   . ( KnownDomain dom
     , NFDataX a
     , NFDataX b
     , 1 <= m )
  => SNat m
  -- ^ Number of cycles to assert the reset
  -> a
  -- ^ Reset value
  -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
  -> [b]
simulateWithReset n resetVal f as =
  E.simulateWithReset n resetVal (exposeClockResetEnable f) as
{-# INLINE simulateWithReset #-}

-- | Same as 'simulateWithReset', but only sample the first /Int/ output values.
simulateWithResetN
  :: forall dom a b m
   . ( KnownDomain dom
     , NFDataX a
     , NFDataX b
     , 1 <= m )
  => SNat m
  -- ^ Number of cycles to assert the reset
  -> a
  -- ^ Reset value
  -> Int
  -- ^ Number of cycles to simulate (excluding cycles spent in reset)
  -> (HiddenClockResetEnable dom => Signal dom a -> Signal dom b)
  -- ^ 'Signal' we want to sample, whose source potentially has a hidden clock
  -- (and reset)
  -> [a]
  -> [b]
simulateWithResetN nReset resetVal nSamples f as =
  E.simulateWithResetN nReset resetVal nSamples (exposeClockResetEnable f) as
{-# INLINE simulateWithResetN #-}


-- | /Lazily/ simulate a (@'Signal' a -> 'Signal' b@) function given a list of
-- samples of type /a/
--
-- >>> simulate @System (register 8) [1, 2, 3]
-- [8,1,2,3...
-- ...
--
-- __NB__: This function is not synthesizable
simulate_lazy
  :: forall dom a b
   . KnownDomain dom
  => (HiddenClockResetEnable dom  =>
      Signal dom a -> Signal dom b)
  -- ^ Function we want to simulate, whose components potentially have a hidden
  -- clock (and reset)
  -> [a]
  -> [b]
simulate_lazy f0 =
  let f1 = exposeClockResetEnable @dom f0 clockGen resetGen enableGen in
  drop 1 . E.simulate_lazy f1 . dup1
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE simulate_lazy #-}

-- | Simulate a (@'Unbundled' a -> 'Unbundled' b@) function given a list of
-- samples of type @a@
--
-- >>> simulateB @System (unbundle . register (8,8) . bundle) [(1,1), (2,2), (3,3)] :: [(Int,Int)]
-- [(8,8),(1,1),(2,2),(3,3)...
-- ...
--
-- __NB__: This function is not synthesizable
simulateB
  :: forall dom a b
   . ( KnownDomain dom
     , Bundle a
     , Bundle b
     , NFDataX a
     , NFDataX b
     )
  => (HiddenClockResetEnable dom  =>
      Unbundled dom a -> Unbundled dom b)
  -- ^ Function we want to simulate, whose components potentially have a hidden
  -- clock (and reset)
  -> [a]
  -> [b]
simulateB f0 =
  drop 1 . E.simulateB f1 . dup1
 where
  f1 =
    withSpecificClockResetEnable
      @dom
      clockGen
      resetGen
      enableGen
      (const f0)
      (Proxy @dom)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE simulateB #-}

-- | /Lazily/ simulate a (@'Unbundled' a -> 'Unbundled' b@) function given a
-- list of samples of type @a@
--
-- >>> simulateB @System (unbundle . register (8,8) . bundle) [(1,1), (2,2), (3,3)] :: [(Int,Int)]
-- [(8,8),(1,1),(2,2),(3,3)...
-- ...
--
-- __NB__: This function is not synthesizable
simulateB_lazy
  :: forall dom a b
   . ( KnownDomain dom
     , Bundle a
     , Bundle b )
  => (HiddenClockResetEnable dom  =>
      Unbundled dom a -> Unbundled dom b)
  -- ^ Function we want to simulate, whose components potentially have a hidden
  -- clock (and reset)
  -> [a]
  -> [b]
simulateB_lazy f0 =
  drop 1 . E.simulateB_lazy f1 . dup1
 where
  f1 =
    withSpecificClockResetEnable
      @dom
      clockGen
      resetGen
      enableGen
      (const f0)
      (Proxy @dom)
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE simulateB_lazy #-}

dup1 :: [a] -> [a]
dup1 (x:xs) = x:x:xs
dup1 _      = error "empty list"


-- | Simulate a component until it matches a condition
--
-- If the given component has not yet been given a clock, reset, or enable
-- line, 'runUntil' will supply them. The reset will be asserted for a single
-- cycle.
--
-- It prints a message of the form
--
-- @
-- Signal sampled for N cycles until value X
-- @
--
-- __NB__: This function is not synthesizable
--
-- === __Example with test bench__
--
-- A common usage is with a test bench using
-- 'Clash.Explicit.Testbench.outputVerifier'.
--
-- __NB__: Since this uses 'Clash.Explicit.Testbench.assert', when using
-- @clashi@, read the note at "Clash.Explicit.Testbench#assert-clashi".
--
-- @
-- import Clash.Prelude
-- import Clash.Explicit.Testbench
--
-- topEntity
--   :: 'Signal' 'System' Int
--   -> 'Signal' 'System' Int
-- topEntity = id
--
-- testBench
--   :: 'Signal' 'System' Bool
-- testBench = done
--  where
--   testInput = 'Clash.Explicit.Testbench.stimuliGenerator' clk rst $('Clash.Sized.Vector.listToVecTH' [1 :: Int .. 10])
--   expectedOutput =
--     'Clash.Explicit.Testbench.outputVerifier'' clk rst $('Clash.Sized.Vector.listToVecTH' $ [1 :: Int .. 9] '<>' [42])
--   done = expectedOutput $ topEntity testInput
--   clk = 'Clash.Explicit.Testbench.tbSystemClockGen' (not \<$\> done)
--   rst = 'systemResetGen'
-- @
--
-- @
-- > runUntil id testBench
--
--
-- cycle(\<Clock: System\>): 10, outputVerifier
-- expected value: 42, not equal to actual value: 10
-- Signal sampled for 11 cycles until value True
-- @
--
-- When you need to verify multiple test benches, the following invocations come
-- in handy:
--
-- @
-- > 'mapM_' (runUntil id) [ testBenchA, testBenchB ]
-- @
--
-- or when the test benches are in different clock domains:
--
-- @
-- testBenchA :: Signal DomA Bool
-- testBenchB :: Signal DomB Bool
-- @
--
-- @
-- > 'sequence_' [ runUntil id testBenchA, runUntil id testBenchB ]
-- @
runUntil
  :: forall dom a
   . (KnownDomain dom, NFDataX a, ShowX a)
  => (a -> Bool)
  -- ^ Condition checking function, should return @True@ to finish run
  -> (HiddenClockResetEnable dom => Signal dom a)
  -- ^ 'Signal' we want to sample for the condition, potentially having a
  -- hidden clock, reset and/or enable
  -> IO ()
runUntil check s =
  E.runUntil check $ exposeClockResetEnable @dom s clockGen resetGen enableGen

-- * QuickCheck combinators

-- |  @testFor n s@ tests the signal /s/ for /n/ cycles.
--
-- __NB__: This function is not synthesizable
testFor
  :: KnownDomain dom
  => Int
  -- ^ The number of cycles we want to test for
  -> (HiddenClockResetEnable dom  => Signal dom Bool)
  -- ^ 'Signal' we want to evaluate, whose source potentially has a hidden clock
  -- (and reset)
  -> Property
testFor n s = property (and (Clash.Signal.sampleN n s))

#ifdef CLASH_MULTIPLE_HIDDEN
-- ** Synchronization primitive
-- | Implicit version of 'Clash.Explicit.Signal.unsafeSynchronizer'.
unsafeSynchronizer
  :: forall dom1 dom2 a
   . ( HiddenClock dom1
     , HiddenClock dom2 )
  => Signal dom1 a
  -> Signal dom2 a
unsafeSynchronizer =
  hideClock (hideClock E.unsafeSynchronizer)
#endif

-- | Hold reset for a number of cycles relative to an implicit reset signal.
--
-- Example:
--
-- >>> sampleN @System 8 (unsafeToActiveHigh (holdReset (SNat @2)))
-- [True,True,True,False,False,False,False,False]
--
-- 'holdReset' holds the reset for an additional 2 clock cycles for a total
-- of 3 clock cycles where the reset is asserted.
--
holdReset
  :: forall dom m
   . HiddenClockResetEnable dom
  => SNat m
  -- ^ Hold for /m/ cycles, counting from the moment the incoming reset
  -- signal becomes deasserted.
  -> Reset dom
holdReset m =
  hideClockResetEnable (\clk rst en -> E.holdReset clk en m rst)

-- | Like 'fromList', but resets on reset and has a defined reset value.
--
-- >>> let rst = unsafeFromActiveHigh (fromList [True, True, False, False, True, False])
-- >>> let res = withReset rst (fromListWithReset Nothing [Just 'a', Just 'b', Just 'c'])
-- >>> sampleN @System 6 res
-- [Nothing,Nothing,Just 'a',Just 'b',Nothing,Just 'a']
--
-- __NB__: This function is not synthesizable
fromListWithReset
  :: forall dom a
   . (HiddenReset dom, NFDataX a)
  => a
  -> [a]
  -> Signal dom a
fromListWithReset = hideReset E.fromListWithReset
{-# INLINE fromListWithReset #-}

#ifdef CLASH_MULTIPLE_HIDDEN
-- | Convert between different types of reset, adding a synchronizer in case
-- it needs to convert from an asynchronous to a synchronous reset.
convertReset
  :: forall domA domB
   . ( HiddenClock domA
     , HiddenClock domB
     )
  => Reset domA
  -> Reset domB
convertReset =
  E.convertReset hasClock hasClock
#endif

-- | Build an 'Automaton' from a function over 'Signal's.
--
-- __NB__: Consumption of continuation of the 'Automaton' must be affine; that
-- is, you can only apply the continuation associated with a particular element
-- at most once.
signalAutomaton
  :: forall dom a b
   . KnownDomain dom
  => (HiddenClockResetEnable dom => Signal dom a -> Signal dom b)
  -> Automaton (->) a b
signalAutomaton f0 =
  let f1 = exposeClockResetEnable @dom f0 clockGen resetGen enableGen in
  E.signalAutomaton f1
-- See: https://github.com/clash-lang/clash-compiler/pull/2511
{-# CLASH_OPAQUE signalAutomaton #-}