{-# LANGUAGE DeriveGeneric #-}
{-# LANGUAGE DuplicateRecordFields #-}
{-# LANGUAGE NamedFieldPuns #-}
{-# LANGUAGE OverloadedStrings #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE StrictData #-}
{-# LANGUAGE TypeFamilies #-}
{-# LANGUAGE NoImplicitPrelude #-}
{-# OPTIONS_GHC -fno-warn-unused-binds #-}
{-# OPTIONS_GHC -fno-warn-unused-imports #-}
{-# OPTIONS_GHC -fno-warn-unused-matches #-}

-- Derived from AWS service descriptions, licensed under Apache 2.0.

-- |
-- Module      : Amazonka.KeySpaces.RestoreTable
-- Copyright   : (c) 2013-2023 Brendan Hay
-- License     : Mozilla Public License, v. 2.0.
-- Maintainer  : Brendan Hay
-- Stability   : auto-generated
-- Portability : non-portable (GHC extensions)
--
-- Restores the specified table to the specified point in time within the
-- @earliest_restorable_timestamp@ and the current time. For more
-- information about restore points, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/PointInTimeRecovery_HowItWorks.html#howitworks_backup_window Time window for PITR continuous backups>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- Any number of users can execute up to 4 concurrent restores (any type of
-- restore) in a given account.
--
-- When you restore using point in time recovery, Amazon Keyspaces restores
-- your source table\'s schema and data to the state based on the selected
-- timestamp @(day:hour:minute:second)@ to a new table. The Time to Live
-- (TTL) settings are also restored to the state based on the selected
-- timestamp.
--
-- In addition to the table\'s schema, data, and TTL settings,
-- @RestoreTable@ restores the capacity mode, encryption, and point-in-time
-- recovery settings from the source table. Unlike the table\'s schema data
-- and TTL settings, which are restored based on the selected timestamp,
-- these settings are always restored based on the table\'s settings as of
-- the current time or when the table was deleted.
--
-- You can also overwrite these settings during restore:
--
-- • Read\/write capacity mode
--
-- • Provisioned throughput capacity settings
--
-- • Point-in-time (PITR) settings
--
-- • Tags
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/PointInTimeRecovery_HowItWorks.html#howitworks_backup_settings PITR restore settings>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- Note that the following settings are not restored, and you must
-- configure them manually for the new table:
--
-- • Automatic scaling policies (for tables that use provisioned capacity
-- mode)
--
-- • Identity and Access Management (IAM) policies
--
-- • Amazon CloudWatch metrics and alarms
module Amazonka.KeySpaces.RestoreTable
  ( -- * Creating a Request
    RestoreTable (..),
    newRestoreTable,

    -- * Request Lenses
    restoreTable_capacitySpecificationOverride,
    restoreTable_encryptionSpecificationOverride,
    restoreTable_pointInTimeRecoveryOverride,
    restoreTable_restoreTimestamp,
    restoreTable_tagsOverride,
    restoreTable_sourceKeyspaceName,
    restoreTable_sourceTableName,
    restoreTable_targetKeyspaceName,
    restoreTable_targetTableName,

    -- * Destructuring the Response
    RestoreTableResponse (..),
    newRestoreTableResponse,

    -- * Response Lenses
    restoreTableResponse_httpStatus,
    restoreTableResponse_restoredTableARN,
  )
where

import qualified Amazonka.Core as Core
import qualified Amazonka.Core.Lens.Internal as Lens
import qualified Amazonka.Data as Data
import Amazonka.KeySpaces.Types
import qualified Amazonka.Prelude as Prelude
import qualified Amazonka.Request as Request
import qualified Amazonka.Response as Response

-- | /See:/ 'newRestoreTable' smart constructor.
data RestoreTable = RestoreTable'
  { -- | Specifies the read\/write throughput capacity mode for the target table.
    -- The options are:
    --
    -- • @throughputMode:PAY_PER_REQUEST@
    --
    -- • @throughputMode:PROVISIONED@ - Provisioned capacity mode requires
    -- @readCapacityUnits@ and @writeCapacityUnits@ as input.
    --
    -- The default is @throughput_mode:PAY_PER_REQUEST@.
    --
    -- For more information, see
    -- <https://docs.aws.amazon.com/keyspaces/latest/devguide/ReadWriteCapacityMode.html Read\/write capacity modes>
    -- in the /Amazon Keyspaces Developer Guide/.
    capacitySpecificationOverride :: Prelude.Maybe CapacitySpecification,
    -- | Specifies the encryption settings for the target table. You can choose
    -- one of the following KMS key (KMS key):
    --
    -- • @type:AWS_OWNED_KMS_KEY@ - This key is owned by Amazon Keyspaces.
    --
    -- • @type:CUSTOMER_MANAGED_KMS_KEY@ - This key is stored in your account
    -- and is created, owned, and managed by you. This option requires the
    -- @kms_key_identifier@ of the KMS key in Amazon Resource Name (ARN) format
    -- as input.
    --
    -- The default is @type:AWS_OWNED_KMS_KEY@.
    --
    -- For more information, see
    -- <https://docs.aws.amazon.com/keyspaces/latest/devguide/EncryptionAtRest.html Encryption at rest>
    -- in the /Amazon Keyspaces Developer Guide/.
    encryptionSpecificationOverride :: Prelude.Maybe EncryptionSpecification,
    -- | Specifies the @pointInTimeRecovery@ settings for the target table. The
    -- options are:
    --
    -- • @ENABLED@
    --
    -- • @DISABLED@
    --
    -- If it\'s not specified, the default is @DISABLED@.
    --
    -- For more information, see
    -- <https://docs.aws.amazon.com/keyspaces/latest/devguide/PointInTimeRecovery.html Point-in-time recovery>
    -- in the /Amazon Keyspaces Developer Guide/.
    pointInTimeRecoveryOverride :: Prelude.Maybe PointInTimeRecovery,
    -- | The restore timestamp in ISO 8601 format.
    restoreTimestamp :: Prelude.Maybe Data.POSIX,
    -- | A list of key-value pair tags to be attached to the restored table.
    --
    -- For more information, see
    -- <https://docs.aws.amazon.com/keyspaces/latest/devguide/tagging-keyspaces.html Adding tags and labels to Amazon Keyspaces resources>
    -- in the /Amazon Keyspaces Developer Guide/.
    tagsOverride :: Prelude.Maybe (Prelude.NonEmpty Tag),
    -- | The keyspace name of the source table.
    sourceKeyspaceName :: Prelude.Text,
    -- | The name of the source table.
    sourceTableName :: Prelude.Text,
    -- | The name of the target keyspace.
    targetKeyspaceName :: Prelude.Text,
    -- | The name of the target table.
    targetTableName :: Prelude.Text
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'RestoreTable' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'capacitySpecificationOverride', 'restoreTable_capacitySpecificationOverride' - Specifies the read\/write throughput capacity mode for the target table.
-- The options are:
--
-- • @throughputMode:PAY_PER_REQUEST@
--
-- • @throughputMode:PROVISIONED@ - Provisioned capacity mode requires
-- @readCapacityUnits@ and @writeCapacityUnits@ as input.
--
-- The default is @throughput_mode:PAY_PER_REQUEST@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/ReadWriteCapacityMode.html Read\/write capacity modes>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- 'encryptionSpecificationOverride', 'restoreTable_encryptionSpecificationOverride' - Specifies the encryption settings for the target table. You can choose
-- one of the following KMS key (KMS key):
--
-- • @type:AWS_OWNED_KMS_KEY@ - This key is owned by Amazon Keyspaces.
--
-- • @type:CUSTOMER_MANAGED_KMS_KEY@ - This key is stored in your account
-- and is created, owned, and managed by you. This option requires the
-- @kms_key_identifier@ of the KMS key in Amazon Resource Name (ARN) format
-- as input.
--
-- The default is @type:AWS_OWNED_KMS_KEY@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/EncryptionAtRest.html Encryption at rest>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- 'pointInTimeRecoveryOverride', 'restoreTable_pointInTimeRecoveryOverride' - Specifies the @pointInTimeRecovery@ settings for the target table. The
-- options are:
--
-- • @ENABLED@
--
-- • @DISABLED@
--
-- If it\'s not specified, the default is @DISABLED@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/PointInTimeRecovery.html Point-in-time recovery>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- 'restoreTimestamp', 'restoreTable_restoreTimestamp' - The restore timestamp in ISO 8601 format.
--
-- 'tagsOverride', 'restoreTable_tagsOverride' - A list of key-value pair tags to be attached to the restored table.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/tagging-keyspaces.html Adding tags and labels to Amazon Keyspaces resources>
-- in the /Amazon Keyspaces Developer Guide/.
--
-- 'sourceKeyspaceName', 'restoreTable_sourceKeyspaceName' - The keyspace name of the source table.
--
-- 'sourceTableName', 'restoreTable_sourceTableName' - The name of the source table.
--
-- 'targetKeyspaceName', 'restoreTable_targetKeyspaceName' - The name of the target keyspace.
--
-- 'targetTableName', 'restoreTable_targetTableName' - The name of the target table.
newRestoreTable ::
  -- | 'sourceKeyspaceName'
  Prelude.Text ->
  -- | 'sourceTableName'
  Prelude.Text ->
  -- | 'targetKeyspaceName'
  Prelude.Text ->
  -- | 'targetTableName'
  Prelude.Text ->
  RestoreTable
newRestoreTable
  pSourceKeyspaceName_
  pSourceTableName_
  pTargetKeyspaceName_
  pTargetTableName_ =
    RestoreTable'
      { capacitySpecificationOverride =
          Prelude.Nothing,
        encryptionSpecificationOverride = Prelude.Nothing,
        pointInTimeRecoveryOverride = Prelude.Nothing,
        restoreTimestamp = Prelude.Nothing,
        tagsOverride = Prelude.Nothing,
        sourceKeyspaceName = pSourceKeyspaceName_,
        sourceTableName = pSourceTableName_,
        targetKeyspaceName = pTargetKeyspaceName_,
        targetTableName = pTargetTableName_
      }

-- | Specifies the read\/write throughput capacity mode for the target table.
-- The options are:
--
-- • @throughputMode:PAY_PER_REQUEST@
--
-- • @throughputMode:PROVISIONED@ - Provisioned capacity mode requires
-- @readCapacityUnits@ and @writeCapacityUnits@ as input.
--
-- The default is @throughput_mode:PAY_PER_REQUEST@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/ReadWriteCapacityMode.html Read\/write capacity modes>
-- in the /Amazon Keyspaces Developer Guide/.
restoreTable_capacitySpecificationOverride :: Lens.Lens' RestoreTable (Prelude.Maybe CapacitySpecification)
restoreTable_capacitySpecificationOverride = Lens.lens (\RestoreTable' {capacitySpecificationOverride} -> capacitySpecificationOverride) (\s@RestoreTable' {} a -> s {capacitySpecificationOverride = a} :: RestoreTable)

-- | Specifies the encryption settings for the target table. You can choose
-- one of the following KMS key (KMS key):
--
-- • @type:AWS_OWNED_KMS_KEY@ - This key is owned by Amazon Keyspaces.
--
-- • @type:CUSTOMER_MANAGED_KMS_KEY@ - This key is stored in your account
-- and is created, owned, and managed by you. This option requires the
-- @kms_key_identifier@ of the KMS key in Amazon Resource Name (ARN) format
-- as input.
--
-- The default is @type:AWS_OWNED_KMS_KEY@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/EncryptionAtRest.html Encryption at rest>
-- in the /Amazon Keyspaces Developer Guide/.
restoreTable_encryptionSpecificationOverride :: Lens.Lens' RestoreTable (Prelude.Maybe EncryptionSpecification)
restoreTable_encryptionSpecificationOverride = Lens.lens (\RestoreTable' {encryptionSpecificationOverride} -> encryptionSpecificationOverride) (\s@RestoreTable' {} a -> s {encryptionSpecificationOverride = a} :: RestoreTable)

-- | Specifies the @pointInTimeRecovery@ settings for the target table. The
-- options are:
--
-- • @ENABLED@
--
-- • @DISABLED@
--
-- If it\'s not specified, the default is @DISABLED@.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/PointInTimeRecovery.html Point-in-time recovery>
-- in the /Amazon Keyspaces Developer Guide/.
restoreTable_pointInTimeRecoveryOverride :: Lens.Lens' RestoreTable (Prelude.Maybe PointInTimeRecovery)
restoreTable_pointInTimeRecoveryOverride = Lens.lens (\RestoreTable' {pointInTimeRecoveryOverride} -> pointInTimeRecoveryOverride) (\s@RestoreTable' {} a -> s {pointInTimeRecoveryOverride = a} :: RestoreTable)

-- | The restore timestamp in ISO 8601 format.
restoreTable_restoreTimestamp :: Lens.Lens' RestoreTable (Prelude.Maybe Prelude.UTCTime)
restoreTable_restoreTimestamp = Lens.lens (\RestoreTable' {restoreTimestamp} -> restoreTimestamp) (\s@RestoreTable' {} a -> s {restoreTimestamp = a} :: RestoreTable) Prelude.. Lens.mapping Data._Time

-- | A list of key-value pair tags to be attached to the restored table.
--
-- For more information, see
-- <https://docs.aws.amazon.com/keyspaces/latest/devguide/tagging-keyspaces.html Adding tags and labels to Amazon Keyspaces resources>
-- in the /Amazon Keyspaces Developer Guide/.
restoreTable_tagsOverride :: Lens.Lens' RestoreTable (Prelude.Maybe (Prelude.NonEmpty Tag))
restoreTable_tagsOverride = Lens.lens (\RestoreTable' {tagsOverride} -> tagsOverride) (\s@RestoreTable' {} a -> s {tagsOverride = a} :: RestoreTable) Prelude.. Lens.mapping Lens.coerced

-- | The keyspace name of the source table.
restoreTable_sourceKeyspaceName :: Lens.Lens' RestoreTable Prelude.Text
restoreTable_sourceKeyspaceName = Lens.lens (\RestoreTable' {sourceKeyspaceName} -> sourceKeyspaceName) (\s@RestoreTable' {} a -> s {sourceKeyspaceName = a} :: RestoreTable)

-- | The name of the source table.
restoreTable_sourceTableName :: Lens.Lens' RestoreTable Prelude.Text
restoreTable_sourceTableName = Lens.lens (\RestoreTable' {sourceTableName} -> sourceTableName) (\s@RestoreTable' {} a -> s {sourceTableName = a} :: RestoreTable)

-- | The name of the target keyspace.
restoreTable_targetKeyspaceName :: Lens.Lens' RestoreTable Prelude.Text
restoreTable_targetKeyspaceName = Lens.lens (\RestoreTable' {targetKeyspaceName} -> targetKeyspaceName) (\s@RestoreTable' {} a -> s {targetKeyspaceName = a} :: RestoreTable)

-- | The name of the target table.
restoreTable_targetTableName :: Lens.Lens' RestoreTable Prelude.Text
restoreTable_targetTableName = Lens.lens (\RestoreTable' {targetTableName} -> targetTableName) (\s@RestoreTable' {} a -> s {targetTableName = a} :: RestoreTable)

instance Core.AWSRequest RestoreTable where
  type AWSResponse RestoreTable = RestoreTableResponse
  request overrides =
    Request.postJSON (overrides defaultService)
  response =
    Response.receiveJSON
      ( \s h x ->
          RestoreTableResponse'
            Prelude.<$> (Prelude.pure (Prelude.fromEnum s))
            Prelude.<*> (x Data..:> "restoredTableARN")
      )

instance Prelude.Hashable RestoreTable where
  hashWithSalt _salt RestoreTable' {..} =
    _salt
      `Prelude.hashWithSalt` capacitySpecificationOverride
      `Prelude.hashWithSalt` encryptionSpecificationOverride
      `Prelude.hashWithSalt` pointInTimeRecoveryOverride
      `Prelude.hashWithSalt` restoreTimestamp
      `Prelude.hashWithSalt` tagsOverride
      `Prelude.hashWithSalt` sourceKeyspaceName
      `Prelude.hashWithSalt` sourceTableName
      `Prelude.hashWithSalt` targetKeyspaceName
      `Prelude.hashWithSalt` targetTableName

instance Prelude.NFData RestoreTable where
  rnf RestoreTable' {..} =
    Prelude.rnf capacitySpecificationOverride
      `Prelude.seq` Prelude.rnf encryptionSpecificationOverride
      `Prelude.seq` Prelude.rnf pointInTimeRecoveryOverride
      `Prelude.seq` Prelude.rnf restoreTimestamp
      `Prelude.seq` Prelude.rnf tagsOverride
      `Prelude.seq` Prelude.rnf sourceKeyspaceName
      `Prelude.seq` Prelude.rnf sourceTableName
      `Prelude.seq` Prelude.rnf targetKeyspaceName
      `Prelude.seq` Prelude.rnf targetTableName

instance Data.ToHeaders RestoreTable where
  toHeaders =
    Prelude.const
      ( Prelude.mconcat
          [ "X-Amz-Target"
              Data.=# ( "KeyspacesService.RestoreTable" ::
                          Prelude.ByteString
                      ),
            "Content-Type"
              Data.=# ( "application/x-amz-json-1.0" ::
                          Prelude.ByteString
                      )
          ]
      )

instance Data.ToJSON RestoreTable where
  toJSON RestoreTable' {..} =
    Data.object
      ( Prelude.catMaybes
          [ ("capacitySpecificationOverride" Data..=)
              Prelude.<$> capacitySpecificationOverride,
            ("encryptionSpecificationOverride" Data..=)
              Prelude.<$> encryptionSpecificationOverride,
            ("pointInTimeRecoveryOverride" Data..=)
              Prelude.<$> pointInTimeRecoveryOverride,
            ("restoreTimestamp" Data..=)
              Prelude.<$> restoreTimestamp,
            ("tagsOverride" Data..=) Prelude.<$> tagsOverride,
            Prelude.Just
              ("sourceKeyspaceName" Data..= sourceKeyspaceName),
            Prelude.Just
              ("sourceTableName" Data..= sourceTableName),
            Prelude.Just
              ("targetKeyspaceName" Data..= targetKeyspaceName),
            Prelude.Just
              ("targetTableName" Data..= targetTableName)
          ]
      )

instance Data.ToPath RestoreTable where
  toPath = Prelude.const "/"

instance Data.ToQuery RestoreTable where
  toQuery = Prelude.const Prelude.mempty

-- | /See:/ 'newRestoreTableResponse' smart constructor.
data RestoreTableResponse = RestoreTableResponse'
  { -- | The response's http status code.
    httpStatus :: Prelude.Int,
    -- | The Amazon Resource Name (ARN) of the restored table.
    restoredTableARN :: Prelude.Text
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'RestoreTableResponse' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'httpStatus', 'restoreTableResponse_httpStatus' - The response's http status code.
--
-- 'restoredTableARN', 'restoreTableResponse_restoredTableARN' - The Amazon Resource Name (ARN) of the restored table.
newRestoreTableResponse ::
  -- | 'httpStatus'
  Prelude.Int ->
  -- | 'restoredTableARN'
  Prelude.Text ->
  RestoreTableResponse
newRestoreTableResponse
  pHttpStatus_
  pRestoredTableARN_ =
    RestoreTableResponse'
      { httpStatus = pHttpStatus_,
        restoredTableARN = pRestoredTableARN_
      }

-- | The response's http status code.
restoreTableResponse_httpStatus :: Lens.Lens' RestoreTableResponse Prelude.Int
restoreTableResponse_httpStatus = Lens.lens (\RestoreTableResponse' {httpStatus} -> httpStatus) (\s@RestoreTableResponse' {} a -> s {httpStatus = a} :: RestoreTableResponse)

-- | The Amazon Resource Name (ARN) of the restored table.
restoreTableResponse_restoredTableARN :: Lens.Lens' RestoreTableResponse Prelude.Text
restoreTableResponse_restoredTableARN = Lens.lens (\RestoreTableResponse' {restoredTableARN} -> restoredTableARN) (\s@RestoreTableResponse' {} a -> s {restoredTableARN = a} :: RestoreTableResponse)

instance Prelude.NFData RestoreTableResponse where
  rnf RestoreTableResponse' {..} =
    Prelude.rnf httpStatus
      `Prelude.seq` Prelude.rnf restoredTableARN