Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the gateway route to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name to use for the gateway route.

The name of the service mesh to create the gateway route in.

The gateway route specification to apply.

The name of the virtual gateway to associate the gateway route with. If the virtual gateway is in a shared mesh, then you must be the owner of the virtual gateway resource.

The response's http status code.

The full description of your gateway route following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The service mesh specification to apply.

Optional metadata that you can apply to the service mesh to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name to use for the service mesh.

The response's http status code.

The full description of your service mesh following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the route to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name of the service mesh to create the route in.

The name to use for the route.

The route specification to apply.

The name of the virtual router in which to create the route. If the virtual router is in a shared mesh, then you must be the owner of the virtual router resource.

The response's http status code.

The full description of your mesh following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the virtual gateway to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name of the service mesh to create the virtual gateway in.

The virtual gateway specification to apply.

The name to use for the virtual gateway.

The response's http status code.

The full description of your virtual gateway following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the virtual node to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name of the service mesh to create the virtual node in.

The virtual node specification to apply.

The name to use for the virtual node.

The response's http status code.

The full description of your virtual node following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the virtual router to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name of the service mesh to create the virtual router in.

The virtual router specification to apply.

The name to use for the virtual router.

The response's http status code.

The full description of your virtual router following the create call.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Optional metadata that you can apply to the virtual service to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The name of the service mesh to create the virtual service in.

The virtual service specification to apply.

The name to use for the virtual service.

The response's http status code.

The full description of your virtual service following the create call.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the gateway route to delete.

The name of the service mesh to delete the gateway route from.

The name of the virtual gateway to delete the route from.

The response's http status code.

The gateway route that was deleted.

The name of the service mesh to delete.

The response's http status code.

The service mesh that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to delete the route in.

The name of the route to delete.

The name of the virtual router to delete the route in.

The response's http status code.

The route that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to delete the virtual gateway from.

The name of the virtual gateway to delete.

The response's http status code.

The virtual gateway that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to delete the virtual node in.

The name of the virtual node to delete.

The response's http status code.

The virtual node that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to delete the virtual router in.

The name of the virtual router to delete.

The response's http status code.

The virtual router that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to delete the virtual service in.

The name of the virtual service to delete.

The response's http status code.

The virtual service that was deleted.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the gateway route to describe.

The name of the service mesh that the gateway route resides in.

The name of the virtual gateway that the gateway route is associated with.

The response's http status code.

The full description of your gateway route.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh to describe.

The response's http status code.

The full description of your service mesh.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the route resides in.

The name of the route to describe.

The name of the virtual router that the route is associated with.

The response's http status code.

The full description of your route.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the gateway route resides in.

The name of the virtual gateway to describe.

The response's http status code.

The full description of your virtual gateway.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual node resides in.

The name of the virtual node to describe.

The response's http status code.

The full description of your virtual node.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual router resides in.

The name of the virtual router to describe.

The response's http status code.

The full description of your virtual router.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual service resides in.

The name of the virtual service to describe.

The response's http status code.

The full description of your virtual service.

The maximum number of results returned by ListGatewayRoutes in paginated output. When you use this parameter, ListGatewayRoutes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListGatewayRoutes request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListGatewayRoutes returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListGatewayRoutes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list gateway routes in.

The name of the virtual gateway to list gateway routes in.

The nextToken value to include in a future ListGatewayRoutes request. When the results of a ListGatewayRoutes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing gateway routes for the specified service mesh and virtual gateway.

The maximum number of results returned by ListMeshes in paginated output. When you use this parameter, ListMeshes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListMeshes request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListMeshes returns up to 100 results and a nextToken value if applicable.

The nextToken value returned from a previous paginated ListMeshes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

This token should be treated as an opaque identifier that is used only to retrieve the next items in a list and not for other programmatic purposes.

The nextToken value to include in a future ListMeshes request. When the results of a ListMeshes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing service meshes.

The maximum number of results returned by ListRoutes in paginated output. When you use this parameter, ListRoutes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListRoutes request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListRoutes returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListRoutes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list routes in.

The name of the virtual router to list routes in.

The nextToken value to include in a future ListRoutes request. When the results of a ListRoutes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing routes for the specified service mesh and virtual router.

The maximum number of tag results returned by ListTagsForResource in paginated output. When this parameter is used, ListTagsForResource returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListTagsForResource request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListTagsForResource returns up to 100 results and a nextToken value if applicable.

The nextToken value returned from a previous paginated ListTagsForResource request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The Amazon Resource Name (ARN) that identifies the resource to list the tags for.

The nextToken value to include in a future ListTagsForResource request. When the results of a ListTagsForResource request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The tags for the resource.

The maximum number of results returned by ListVirtualGateways in paginated output. When you use this parameter, ListVirtualGateways returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualGateways request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListVirtualGateways returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListVirtualGateways request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list virtual gateways in.

The nextToken value to include in a future ListVirtualGateways request. When the results of a ListVirtualGateways request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing virtual gateways for the specified service mesh.

The maximum number of results returned by ListVirtualNodes in paginated output. When you use this parameter, ListVirtualNodes returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualNodes request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListVirtualNodes returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListVirtualNodes request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list virtual nodes in.

The nextToken value to include in a future ListVirtualNodes request. When the results of a ListVirtualNodes request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing virtual nodes for the specified service mesh.

The maximum number of results returned by ListVirtualRouters in paginated output. When you use this parameter, ListVirtualRouters returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualRouters request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListVirtualRouters returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListVirtualRouters request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list virtual routers in.

The nextToken value to include in a future ListVirtualRouters request. When the results of a ListVirtualRouters request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing virtual routers for the specified service mesh.

The maximum number of results returned by ListVirtualServices in paginated output. When you use this parameter, ListVirtualServices returns only limit results in a single page along with a nextToken response element. You can see the remaining results of the initial request by sending another ListVirtualServices request with the returned nextToken value. This value can be between 1 and 100. If you don't use this parameter, ListVirtualServices returns up to 100 results and a nextToken value if applicable.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The nextToken value returned from a previous paginated ListVirtualServices request where limit was used and the results exceeded the value of that parameter. Pagination continues from the end of the previous results that returned the nextToken value.

The name of the service mesh to list virtual services in.

The nextToken value to include in a future ListVirtualServices request. When the results of a ListVirtualServices request exceed limit, you can use this value to retrieve the next page of results. This value is null when there are no more results to return.

The response's http status code.

The list of existing virtual services for the specified service mesh.

The Amazon Resource Name (ARN) of the resource to add tags to.

The tags to add to the resource. A tag is an array of key-value pairs. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

The response's http status code.

The Amazon Resource Name (ARN) of the resource to delete tags from.

The keys of the tags to be removed.

The response's http status code.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the gateway route to update.

The name of the service mesh that the gateway route resides in.

The new gateway route specification to apply. This overwrites the existing data.

The name of the virtual gateway that the gateway route is associated with.

The response's http status code.

A full description of the gateway route that was updated.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The service mesh specification to apply.

The name of the service mesh to update.

The response's http status code.

Undocumented member.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the route resides in.

The name of the route to update.

The new route specification to apply. This overwrites the existing data.

The name of the virtual router that the route is associated with.

The response's http status code.

A full description of the route that was updated.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual gateway resides in.

The new virtual gateway specification to apply. This overwrites the existing data.

The name of the virtual gateway to update.

The response's http status code.

A full description of the virtual gateway that was updated.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual node resides in.

The new virtual node specification to apply. This overwrites the existing data.

The name of the virtual node to update.

The response's http status code.

A full description of the virtual node that was updated.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual router resides in.

The new virtual router specification to apply. This overwrites the existing data.

The name of the virtual router to update.

The response's http status code.

A full description of the virtual router that was updated.

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The name of the service mesh that the virtual service resides in.

The new virtual service specification to apply. This overwrites the existing data.

The name of the virtual service to update.

The response's http status code.

A full description of the virtual service that was updated.

The file object to send virtual node access logs to.

The name of an Cloud Map service instance attribute key. Any Cloud Map service instance that contains the specified key and value is returned.

The value of an Cloud Map service instance attribute key. Any Cloud Map service instance that contains the specified key and value is returned.

A string map that contains attributes with values that you can use to filter instances by any custom attribute that you specified when you registered the instance. Only instances that match all of the specified key/value pairs will be returned.

The preferred IP version that this virtual node uses. Setting the IP preference on the virtual node only overrides the IP preference set for the mesh on this specific node.

The name of the Cloud Map namespace to use.

The name of the Cloud Map service to use.

Specifies a virtual service to use as a backend.

A reference to an object that represents a client policy.

A reference to an object that represents a Transport Layer Security (TLS) client policy.

A reference to an object that represents a client's TLS certificate.

Whether the policy is enforced. The default is True, if a value isn't specified.

One or more ports that the policy is enforced for.

A reference to an object that represents a TLS validation context.

An object that represents a local file certificate. The certificate must meet specific requirements and you must have proxy authorization enabled. For more information, see Transport Layer Security (TLS).

A reference to an object that represents a client's TLS Secret Discovery Service certificate.

The preferred IP version that this virtual node uses. Setting the IP preference on the virtual node only overrides the IP preference set for the mesh on this specific node.

Specifies the DNS response type for the virtual node.

Specifies the DNS service discovery hostname for the virtual node.

A unit of time.

A number of time units.

The egress filter type. By default, the type is DROP_ALL, which allows egress only from virtual nodes to other defined resources in the service mesh (and any traffic to *.amazonaws.com for Amazon Web Services API calls). You can set the egress filter type to ALLOW_ALL to allow egress to any endpoint inside or outside of the service mesh.

The specified format for the logs. The format is either json_format or text_format.

The file path to write access logs to. You can use /dev/stdout to send access logs to standard out and configure your Envoy container to use a log driver, such as awslogs, to export the access logs to a log storage service such as Amazon CloudWatch Logs. You can also specify a path in the Envoy container's file system to write the files to disk.

 <note> <p>The Envoy process must have write permissions to the path that you specify here. Otherwise, Envoy fails to bootstrap properly.</p> </note>

The name of the gateway route.

The name of the service mesh that the resource resides in.

Undocumented member.

The specifications of the gateway route.

The status of the gateway route.

The virtual gateway that the gateway route is associated with.

The exact host name to match on.

The specified ending characters of the host name to match on.

The default target host name to write to.

The full Amazon Resource Name (ARN) for the gateway route.

The Unix epoch timestamp in seconds for when the resource was created.

The name of the gateway route.

The Unix epoch timestamp in seconds for when the resource was last updated.

The name of the service mesh that the resource resides in.

The Amazon Web Services IAM account ID of the service mesh owner. If the account ID is not your own, then it's the ID of the account that shared the mesh with your account. For more information about mesh sharing, see Working with shared meshes.

The Amazon Web Services IAM account ID of the resource owner. If the account ID is not your own, then it's the ID of the mesh owner or of another account that the mesh is shared with. For more information about mesh sharing, see Working with shared meshes.

The version of the resource. Resources are created at version 1, and this version is incremented each time that they're updated.

The virtual gateway that the gateway route is associated with.

An object that represents the specification of a gRPC gateway route.

An object that represents the specification of an HTTP/2 gateway route.

An object that represents the specification of an HTTP gateway route.

The ordering of the gateway routes spec.

The current status for the gateway route.

The port number of the gateway route target.

An object that represents a virtual service gateway route target.

The name of the virtual service that traffic is routed to.

An object that represents the action to take if a match is determined.

An object that represents the criteria for determining a request match.

The gateway route action to rewrite.

An object that represents the target that traffic is routed to when a request matches the gateway route.

The gateway route host name to be matched on.

The gateway route metadata to be matched on.

The port number to match from the request.

The fully qualified domain name for the service to match from the request.

Specify True to match anything except the match criteria. The default value is False.

The criteria for determining a metadata match.

A name for the gateway route metadata.

The host name of the gateway route to rewrite.

The exact method header to be matched on.

The specified beginning characters of the method header to be matched on.

Undocumented member.

The regex used to match the method header.

The specified ending characters of the method header to match on.

Specify at least one of the valid values.

Specify at least one of the following values.

• server-error – HTTP status codes 500, 501, 502, 503, 504, 505, 506, 507, 508, 510, and 511
• gateway-error – HTTP status codes 502, 503, and 504
• client-error – HTTP status code 409
• stream-error – Retry on refused stream

Specify a valid value. The event occurs before any processing of a request has started and is encountered when the upstream is temporarily or permanently unavailable.

The maximum number of retry attempts.

The timeout for each retry attempt.

An object that represents a retry policy.

An object that represents types of timeouts.

An object that represents the action to take if a match is determined.

An object that represents the criteria for determining a request match.

An object that represents the targets that traffic is routed to when a request matches the route.

An object that represents the data to match from the request.

The method name to match from the request. If you specify a name, you must also specify a serviceName.

The port number to match on.

The fully qualified domain name for the service to match from the request.

Specify True to match anything except the match criteria. The default value is False.

An object that represents the data to match from the request.

The name of the route.

The value sent by the client must match the specified value exactly.

The value sent by the client must begin with the specified characters.

An object that represents the range of values to match on.

The value sent by the client must include the specified characters.

The value sent by the client must end with the specified characters.

An object that represents an idle timeout. An idle timeout bounds the amount of time that a connection may be idle. The default value is none.

An object that represents a per request timeout. The default value is 15 seconds. If you set a higher timeout, then make sure that the higher value is set for each App Mesh resource in a conversation. For example, if a virtual node backend uses a virtual router provider to route to another virtual node, then the timeout should be greater than 15 seconds for the source and destination virtual node and the route.

The value sent by the client must match the specified value exactly.

The value sent by the client must begin with the specified characters.

An object that represents the range of values to match on.

The value sent by the client must include the specified characters.

The value sent by the client must end with the specified characters.

The destination path for the health check request. This value is only used if the specified protocol is HTTP or HTTP/2. For any other protocol, this value is ignored.

The destination port for the health check request. This port must match the port defined in the PortMapping for the listener.

The number of consecutive successful health checks that must occur before declaring listener healthy.

The time period in milliseconds between each health check execution.

The protocol for the health check request. If you specify grpc, then your service must conform to the GRPC Health Checking Protocol.

The amount of time to wait when receiving a response from the health check, in milliseconds.

The number of consecutive failed health checks that must occur before declaring a virtual node unhealthy.

An object that represents the action to take if a match is determined.

An object that represents the criteria for determining a request match.

The gateway route action to rewrite.

An object that represents the target that traffic is routed to when a request matches the gateway route.

Specify True to match anything except the match criteria. The default value is False.

An object that represents the method and value to match with the header value sent in a request. Specify one match method.

A name for the HTTP header in the gateway route that will be matched on.

The client request headers to match on.

The host name to match on.

The method to match on.

The path to match on.

The port number to match on.

Specifies the path to match requests with. This parameter must always start with /, which by itself matches all requests to the virtual service name. You can also match for path-based routing of requests. For example, if your virtual service name is my-service.local and you want the route to match requests to my-service.local/metrics, your prefix should be /metrics.

The query parameter to match on.

The exact path to rewrite.

The default prefix used to replace the incoming route prefix when rewritten.

The value used to replace the incoming route prefix when rewritten.

The host name to rewrite.

The path to rewrite.

The specified beginning characters to rewrite.

The exact path to match on.

The regex used to match the path.

The query parameter to match on.

A name for the query parameter that will be matched on.