-- |
-- Module : Simulation.Aivika.Stream
-- Copyright : Copyright (c) 2009-2015, David Sorokin
-- License : BSD3
-- Maintainer : David Sorokin
-- Stability : experimental
-- Tested with: GHC 7.8.3
--
-- The infinite stream of data in time.
--
module Simulation.Aivika.Stream
(-- * Stream Type
Stream(..),
-- * Merging and Splitting Stream
emptyStream,
mergeStreams,
mergeQueuedStreams,
mergePriorityStreams,
concatStreams,
concatQueuedStreams,
concatPriorityStreams,
splitStream,
splitStreamQueueing,
splitStreamPrioritising,
-- * Specifying Identifier
streamUsingId,
-- * Prefetching and Delaying Stream
prefetchStream,
delayStream,
-- * Stream Arriving
arrivalStream,
-- * Memoizing, Zipping and Uzipping Stream
memoStream,
zipStreamSeq,
zipStreamParallel,
zip3StreamSeq,
zip3StreamParallel,
unzipStream,
streamSeq,
streamParallel,
-- * Consuming and Sinking Stream
consumeStream,
sinkStream,
-- * Useful Combinators
repeatProcess,
mapStream,
mapStreamM,
apStream,
apStreamM,
filterStream,
filterStreamM,
takeStream,
takeStreamWhile,
takeStreamWhileM,
dropStream,
dropStreamWhile,
dropStreamWhileM,
singletonStream,
joinStream,
-- * Failover
failoverStream,
-- * Integrating with Signals
signalStream,
streamSignal,
-- * Utilities
leftStream,
rightStream,
replaceLeftStream,
replaceRightStream,
partitionEitherStream,
-- * Debugging
traceStream) where
import Data.IORef
import Data.Maybe
import Data.Monoid
import Control.Applicative
import Control.Monad
import Control.Monad.Trans
import Simulation.Aivika.Simulation
import Simulation.Aivika.Dynamics
import Simulation.Aivika.Event
import Simulation.Aivika.Cont
import Simulation.Aivika.Process
import Simulation.Aivika.Signal
import Simulation.Aivika.Resource
import Simulation.Aivika.QueueStrategy
import Simulation.Aivika.Queue.Infinite
import Simulation.Aivika.Internal.Arrival
-- | Represents an infinite stream of data in time,
-- some kind of the cons cell.
newtype Stream a = Cons { runStream :: Process (a, Stream a)
-- ^ Run the stream.
}
instance Functor Stream where
fmap = mapStream
instance Applicative Stream where
pure a = let y = Cons (return (a, y)) in y
(<*>) = apStream
instance Alternative Stream where
empty = emptyStream
(<|>) = mergeStreams
instance Monoid (Stream a) where
mempty = emptyStream
mappend = mergeStreams
mconcat = concatStreams
-- | Create a stream that will use the specified process identifier.
-- It can be useful to refer to the underlying 'Process' computation which
-- can be passivated, interrupted, canceled and so on. See also the
-- 'processUsingId' function for more details.
streamUsingId :: ProcessId -> Stream a -> Stream a
streamUsingId pid (Cons s) =
Cons $ processUsingId pid s
-- | Memoize the stream so that it would always return the same data
-- within the simulation run.
memoStream :: Stream a -> Simulation (Stream a)
memoStream (Cons s) =
do p <- memoProcess $
do ~(x, xs) <- s
xs' <- liftSimulation $ memoStream xs
return (x, xs')
return (Cons p)
-- | Zip two streams trying to get data sequentially.
zipStreamSeq :: Stream a -> Stream b -> Stream (a, b)
zipStreamSeq (Cons sa) (Cons sb) = Cons y where
y = do ~(x, xs) <- sa
~(y, ys) <- sb
return ((x, y), zipStreamSeq xs ys)
-- | Zip two streams trying to get data as soon as possible,
-- launching the sub-processes in parallel.
zipStreamParallel :: Stream a -> Stream b -> Stream (a, b)
zipStreamParallel (Cons sa) (Cons sb) = Cons y where
y = do ~((x, xs), (y, ys)) <- zipProcessParallel sa sb
return ((x, y), zipStreamParallel xs ys)
-- | Zip three streams trying to get data sequentially.
zip3StreamSeq :: Stream a -> Stream b -> Stream c -> Stream (a, b, c)
zip3StreamSeq (Cons sa) (Cons sb) (Cons sc) = Cons y where
y = do ~(x, xs) <- sa
~(y, ys) <- sb
~(z, zs) <- sc
return ((x, y, z), zip3StreamSeq xs ys zs)
-- | Zip three streams trying to get data as soon as possible,
-- launching the sub-processes in parallel.
zip3StreamParallel :: Stream a -> Stream b -> Stream c -> Stream (a, b, c)
zip3StreamParallel (Cons sa) (Cons sb) (Cons sc) = Cons y where
y = do ~((x, xs), (y, ys), (z, zs)) <- zip3ProcessParallel sa sb sc
return ((x, y, z), zip3StreamParallel xs ys zs)
-- | Unzip the stream.
unzipStream :: Stream (a, b) -> Simulation (Stream a, Stream b)
unzipStream s =
do s' <- memoStream s
let sa = mapStream fst s'
sb = mapStream snd s'
return (sa, sb)
-- | To form each new portion of data for the output stream,
-- read data sequentially from the input streams.
--
-- This is a generalization of 'zipStreamSeq'.
streamSeq :: [Stream a] -> Stream [a]
streamSeq xs = Cons y where
y = do ps <- forM xs runStream
return (map fst ps, streamSeq $ map snd ps)
-- | To form each new portion of data for the output stream,
-- read data from the input streams in parallel.
--
-- This is a generalization of 'zipStreamParallel'.
streamParallel :: [Stream a] -> Stream [a]
streamParallel xs = Cons y where
y = do ps <- processParallel $ map runStream xs
return (map fst ps, streamParallel $ map snd ps)
-- | Return a stream of values generated by the specified process.
repeatProcess :: Process a -> Stream a
repeatProcess p = Cons y where
y = do a <- p
return (a, repeatProcess p)
-- | Map the stream according the specified function.
mapStream :: (a -> b) -> Stream a -> Stream b
mapStream f (Cons s) = Cons y where
y = do (a, xs) <- s
return (f a, mapStream f xs)
-- | Compose the stream.
mapStreamM :: (a -> Process b) -> Stream a -> Stream b
mapStreamM f (Cons s) = Cons y where
y = do (a, xs) <- s
b <- f a
return (b, mapStreamM f xs)
-- | Sequential application.
apStream :: Stream (a -> b) -> Stream a -> Stream b
apStream (Cons sf) (Cons sa) = Cons y where
y = do (f, sf') <- sf
(a, sa') <- sa
return (f a, apStream sf' sa')
-- | Sequential application.
apStreamM :: Stream (a -> Process b) -> Stream a -> Stream b
apStreamM (Cons sf) (Cons sa) = Cons y where
y = do (f, sf') <- sf
(a, sa') <- sa
x <- f a
return (x, apStreamM sf' sa')
-- | Filter only those data values that satisfy to the specified predicate.
filterStream :: (a -> Bool) -> Stream a -> Stream a
filterStream p (Cons s) = Cons y where
y = do (a, xs) <- s
if p a
then return (a, filterStream p xs)
else let Cons z = filterStream p xs in z
-- | Filter only those data values that satisfy to the specified predicate.
filterStreamM :: (a -> Process Bool) -> Stream a -> Stream a
filterStreamM p (Cons s) = Cons y where
y = do (a, xs) <- s
b <- p a
if b
then return (a, filterStreamM p xs)
else let Cons z = filterStreamM p xs in z
-- | The stream of 'Left' values.
leftStream :: Stream (Either a b) -> Stream a
leftStream (Cons s) = Cons y where
y = do (a, xs) <- s
case a of
Left a -> return (a, leftStream xs)
Right _ -> let Cons z = leftStream xs in z
-- | The stream of 'Right' values.
rightStream :: Stream (Either a b) -> Stream b
rightStream (Cons s) = Cons y where
y = do (a, xs) <- s
case a of
Left _ -> let Cons z = rightStream xs in z
Right a -> return (a, rightStream xs)
-- | Replace the 'Left' values.
replaceLeftStream :: Stream (Either a b) -> Stream c -> Stream (Either c b)
replaceLeftStream (Cons sab) (ys0 @ ~(Cons sc)) = Cons z where
z = do (a, xs) <- sab
case a of
Left _ ->
do (b, ys) <- sc
return (Left b, replaceLeftStream xs ys)
Right a ->
return (Right a, replaceLeftStream xs ys0)
-- | Replace the 'Right' values.
replaceRightStream :: Stream (Either a b) -> Stream c -> Stream (Either a c)
replaceRightStream (Cons sab) (ys0 @ ~(Cons sc)) = Cons z where
z = do (a, xs) <- sab
case a of
Right _ ->
do (b, ys) <- sc
return (Right b, replaceRightStream xs ys)
Left a ->
return (Left a, replaceRightStream xs ys0)
-- | Partition the stream of 'Either' values into two streams.
partitionEitherStream :: Stream (Either a b) -> Simulation (Stream a, Stream b)
partitionEitherStream s =
do s' <- memoStream s
return (leftStream s', rightStream s')
-- | Split the input stream into the specified number of output streams
-- after applying the 'FCFS' strategy for enqueuing the output requests.
splitStream :: Int -> Stream a -> Simulation [Stream a]
splitStream = splitStreamQueueing FCFS
-- | Split the input stream into the specified number of output streams.
--
-- If you don't know what the strategy to apply, then you probably
-- need the 'FCFS' strategy, or function 'splitStream' that
-- does namely this.
splitStreamQueueing :: EnqueueStrategy s
=> s
-- ^ the strategy applied for enqueuing the output requests
-> Int
-- ^ the number of output streams
-> Stream a
-- ^ the input stream
-> Simulation [Stream a]
-- ^ the splitted output streams
splitStreamQueueing s n x =
do ref <- liftIO $ newIORef x
res <- newResource s 1
let reader =
usingResource res $
do p <- liftIO $ readIORef ref
(a, xs) <- runStream p
liftIO $ writeIORef ref xs
return a
return $ map (\i -> repeatProcess reader) [1..n]
-- | Split the input stream into a list of output streams
-- using the specified priorities.
splitStreamPrioritising :: PriorityQueueStrategy s p
=> s
-- ^ the strategy applied for enqueuing the output requests
-> [Stream p]
-- ^ the streams of priorities
-> Stream a
-- ^ the input stream
-> Simulation [Stream a]
-- ^ the splitted output streams
splitStreamPrioritising s ps x =
do ref <- liftIO $ newIORef x
res <- newResource s 1
let stream (Cons p) = Cons z where
z = do (p', ps) <- p
a <- usingResourceWithPriority res p' $
do p <- liftIO $ readIORef ref
(a, xs) <- runStream p
liftIO $ writeIORef ref xs
return a
return (a, stream ps)
return $ map stream ps
-- | Concatenate the input streams applying the 'FCFS' strategy and
-- producing one output stream.
concatStreams :: [Stream a] -> Stream a
concatStreams = concatQueuedStreams FCFS
-- | Concatenate the input streams producing one output stream.
--
-- If you don't know what the strategy to apply, then you probably
-- need the 'FCFS' strategy, or function 'concatStreams' that
-- does namely this.
concatQueuedStreams :: EnqueueStrategy s
=> s
-- ^ the strategy applied for enqueuing the input data
-> [Stream a]
-- ^ the input stream
-> Stream a
-- ^ the combined output stream
concatQueuedStreams s streams = Cons z where
z = do reading <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
writing <- liftSimulation $ newResourceWithMaxCount s 1 (Just 1)
conting <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
ref <- liftIO $ newIORef Nothing
let writer p =
do (a, xs) <- runStream p
requestResource writing
liftIO $ writeIORef ref (Just a)
releaseResource reading
requestResource conting
writer xs
reader =
do requestResource reading
Just a <- liftIO $ readIORef ref
liftIO $ writeIORef ref Nothing
releaseResource writing
return a
forM_ streams $ spawnProcess . writer
a <- reader
let xs = repeatProcess (releaseResource conting >> reader)
return (a, xs)
-- | Concatenate the input priority streams producing one output stream.
concatPriorityStreams :: PriorityQueueStrategy s p
=> s
-- ^ the strategy applied for enqueuing the input data
-> [Stream (p, a)]
-- ^ the input stream
-> Stream a
-- ^ the combined output stream
concatPriorityStreams s streams = Cons z where
z = do reading <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
writing <- liftSimulation $ newResourceWithMaxCount s 1 (Just 1)
conting <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
ref <- liftIO $ newIORef Nothing
let writer p =
do ((priority, a), xs) <- runStream p
requestResourceWithPriority writing priority
liftIO $ writeIORef ref (Just a)
releaseResource reading
requestResource conting
writer xs
reader =
do requestResource reading
Just a <- liftIO $ readIORef ref
liftIO $ writeIORef ref Nothing
releaseResource writing
return a
forM_ streams $ spawnProcess . writer
a <- reader
let xs = repeatProcess (releaseResource conting >> reader)
return (a, xs)
-- | Merge two streams applying the 'FCFS' strategy for enqueuing the input data.
mergeStreams :: Stream a -> Stream a -> Stream a
mergeStreams = mergeQueuedStreams FCFS
-- | Merge two streams.
--
-- If you don't know what the strategy to apply, then you probably
-- need the 'FCFS' strategy, or function 'mergeStreams' that
-- does namely this.
mergeQueuedStreams :: EnqueueStrategy s
=> s
-- ^ the strategy applied for enqueuing the input data
-> Stream a
-- ^ the fist input stream
-> Stream a
-- ^ the second input stream
-> Stream a
-- ^ the output combined stream
mergeQueuedStreams s x y = concatQueuedStreams s [x, y]
-- | Merge two priority streams.
mergePriorityStreams :: PriorityQueueStrategy s p
=> s
-- ^ the strategy applied for enqueuing the input data
-> Stream (p, a)
-- ^ the fist input stream
-> Stream (p, a)
-- ^ the second input stream
-> Stream a
-- ^ the output combined stream
mergePriorityStreams s x y = concatPriorityStreams s [x, y]
-- | An empty stream that never returns data.
emptyStream :: Stream a
emptyStream = Cons neverProcess
-- | Consume the stream. It returns a process that infinitely reads data
-- from the stream and then redirects them to the provided function.
-- It is useful for modeling the process of enqueueing data in the queue
-- from the input stream.
consumeStream :: (a -> Process ()) -> Stream a -> Process ()
consumeStream f = p where
p (Cons s) = do (a, xs) <- s
f a
p xs
-- | Sink the stream. It returns a process that infinitely reads data
-- from the stream. The resulting computation can be a moving force
-- to simulate the whole system of the interconnected streams and
-- processors.
sinkStream :: Stream a -> Process ()
sinkStream = p where
p (Cons s) = do (a, xs) <- s
p xs
-- | Prefetch the input stream requesting for one more data item in advance
-- while the last received item is not yet fully processed in the chain of
-- streams, usually by the processors.
--
-- You can think of this as the prefetched stream could place its latest
-- data item in some temporary space for later use, which is very useful
-- for modeling a sequence of separate and independent work places.
prefetchStream :: Stream a -> Stream a
prefetchStream s = Cons z where
z = do reading <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
writing <- liftSimulation $ newResourceWithMaxCount FCFS 1 (Just 1)
ref <- liftIO $ newIORef Nothing
let writer p =
do (a, xs) <- runStream p
requestResource writing
liftIO $ writeIORef ref (Just a)
releaseResource reading
writer xs
reader =
do requestResource reading
Just a <- liftIO $ readIORef ref
liftIO $ writeIORef ref Nothing
releaseResource writing
return a
spawnProcess $ writer s
runStream $ repeatProcess reader
-- | Return a stream of values triggered by the specified signal.
--
-- Since the time at which the values of the stream are requested for may differ from
-- the time at which the signal is triggered, it can be useful to apply the 'arrivalSignal'
-- function to add the information about the time points at which the signal was
-- actually received.
--
-- The point is that the 'Stream' is requested outside, while the 'Signal' is triggered
-- inside. They are different by nature. The former is passive, while the latter is active.
--
-- The resulting stream may be a root of space leak as it uses an internal queue to store
-- the values received from the signal. The oldest value is dequeued each time we request
-- the stream and it is returned within the computation.
--
-- Cancel the stream's process to unsubscribe from the specified signal.
signalStream :: Signal a -> Process (Stream a)
signalStream s =
do q <- liftEvent newFCFSQueue
h <- liftEvent $
handleSignal s $
enqueue q
whenCancellingProcess $ disposeEvent h
return $ repeatProcess $ dequeue q
-- | Return a computation of the signal that triggers values from the specified stream,
-- each time the next value of the stream is received within the underlying 'Process'
-- computation.
--
-- Cancel the returned process to stop reading from the specified stream.
streamSignal :: Stream a -> Process (Signal a)
streamSignal z =
do s <- liftSimulation newSignalSource
spawnProcess $
consumeStream (liftEvent . triggerSignal s) z
return $ publishSignal s
-- | Transform a stream so that the resulting stream returns a sequence of arrivals
-- saving the information about the time points at which the original stream items
-- were received by demand.
arrivalStream :: Stream a -> Stream (Arrival a)
arrivalStream s = Cons $ loop s Nothing where
loop s t0 = do (a, xs) <- runStream s
t <- liftDynamics time
let b = Arrival { arrivalValue = a,
arrivalTime = t,
arrivalDelay =
case t0 of
Nothing -> Nothing
Just t0 -> Just (t - t0) }
return (b, Cons $ loop xs (Just t))
-- | Delay the stream by one step using the specified initial value.
delayStream :: a -> Stream a -> Stream a
delayStream a0 s = Cons $ return (a0, s)
-- | Return a stream consisting of exactly one element and inifinite tail.
singletonStream :: a -> Stream a
singletonStream a = Cons $ return (a, emptyStream)
-- | Removes one level of the computation, projecting its bound stream into the outer level.
joinStream :: Process (Stream a) -> Stream a
joinStream m = Cons $ m >>= runStream
-- | Takes the next stream from the list after the current stream fails because of cancelling the underlying process.
failoverStream :: [Stream a] -> Stream a
failoverStream ps = Cons z where
z = do reading <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
writing <- liftSimulation $ newResourceWithMaxCount FCFS 0 (Just 1)
ref <- liftIO $ newIORef Nothing
pid <- processId
let writer p =
do requestResource writing
pid' <- processId
(a, xs) <-
finallyProcess (runStream p) $
liftEvent $
do cancelled' <- processCancelled pid'
when cancelled' $
releaseResourceWithinEvent writing
liftIO $ writeIORef ref (Just a)
releaseResource reading
writer xs
reader =
do releaseResource writing
requestResource reading
Just a <- liftIO $ readIORef ref
liftIO $ writeIORef ref Nothing
return a
loop [] = return ()
loop (p: ps) =
do pid' <- processId
h' <- liftEvent $
handleSignal (processCancelling pid) $ \() ->
cancelProcessWithId pid'
finallyProcess (writer p) $
liftEvent $
do disposeEvent h'
cancelled <- processCancelled pid
unless cancelled $
do cancelled' <- processCancelled pid'
unless cancelled' $
error "Expected the sub-process to be cancelled: failoverStream"
runProcess $ loop ps
liftEvent $ runProcess $ loop ps
runStream $ repeatProcess reader
-- | Return the prefix of the stream of the specified length.
takeStream :: Int -> Stream a -> Stream a
takeStream n s
| n <= 0 = emptyStream
| otherwise =
Cons $
do (a, xs) <- runStream s
return (a, takeStream (n - 1) xs)
-- | Return the longest prefix of the stream of elements that satisfy the predicate.
takeStreamWhile :: (a -> Bool) -> Stream a -> Stream a
takeStreamWhile p s =
Cons $
do (a, xs) <- runStream s
if p a
then return (a, takeStreamWhile p xs)
else neverProcess
-- | Return the longest prefix of the stream of elements that satisfy the computation.
takeStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a
takeStreamWhileM p s =
Cons $
do (a, xs) <- runStream s
f <- p a
if f
then return (a, takeStreamWhileM p xs)
else neverProcess
-- | Return the suffix of the stream after the specified first elements.
dropStream :: Int -> Stream a -> Stream a
dropStream n s
| n <= 0 = s
| otherwise =
Cons $
do (a, xs) <- runStream s
runStream $ dropStream (n - 1) xs
-- | Return the suffix of the stream of elements remaining after 'takeStreamWhile'.
dropStreamWhile :: (a -> Bool) -> Stream a -> Stream a
dropStreamWhile p s =
Cons $
do (a, xs) <- runStream s
if p a
then runStream $ dropStreamWhile p xs
else return (a, xs)
-- | Return the suffix of the stream of elements remaining after 'takeStreamWhileM'.
dropStreamWhileM :: (a -> Process Bool) -> Stream a -> Stream a
dropStreamWhileM p s =
Cons $
do (a, xs) <- runStream s
f <- p a
if f
then runStream $ dropStreamWhileM p xs
else return (a, xs)
-- | Show the debug messages with the current simulation time.
traceStream :: Maybe String
-- ^ the request message
-> Maybe String
-- ^ the response message
-> Stream a
-- ^ a stream
-> Stream a
traceStream request response s = Cons $ loop s where
loop s = do (a, xs) <-
case request of
Nothing -> runStream s
Just message ->
traceProcess message $
runStream s
case response of
Nothing -> return (a, Cons $ loop xs)
Just message ->
traceProcess message $
return (a, Cons $ loop xs)