/* -------------------------------------------------------------------
**
** riakclient.proto: Protocol buffers for riak
**
** Copyright (c) 2007-2010 Basho Technologies, Inc.  All Rights Reserved.
**
** This file is provided to you under the Apache License,
** Version 2.0 (the "License"); you may not use this file
** except in compliance with the License.  You may obtain
** a copy of the License at
**
**   http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing,
** software distributed under the License is distributed on an
** "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
** KIND, either express or implied.  See the License for the
** specific language governing permissions and limitations
** under the License.
**
** -------------------------------------------------------------------
*/
/*
** Revision: 1.1
**
** Lowest Common Denominator Protocol Buffers Client
**   - no ENUM (protobuffs_erlang does not support)
**
** Protocol 
**
**   The protocol encodes requests and responses as protocol buffer messages.
**   Each request message results in one or more response messages.
**   As message type and length are not encoded by PB they are sent
**   on the wire as
**
**     <length:32>  <msg_code:8> <pbmsg>
**
**     length is the length of msg_code (1 byte) plus the message length
**     in bytes encoded in network order (big endian)
**
**     msg_code indicates what is encoded as pbmsg
**
**     pbmsg is the encoded protocol buffer message
**
**   On connect, the client can make requests and will receive responses.
**   For each request message there is a corresponding response message,
**   or the server will respond with an error message if something has
**   gone wrong.
**
**   The client should be prepared to handle messages without any pbmsg
**   (i.e. length==1) for requests like ping or a put without return_body set.
**   
**   RpbGetClientIdReq -> RpbGetClientIdResp
**   RpbSetClientIdReq -> RpbSetClientIdResp
**   RpbGetServerInfoReq -> RpbGetServerInfoResp
**   RpbPingReq -> RpbPingResp
**   RpbGetReq -> RpbErrorResp | RbpGetResp
**   RpbPutReq -> RpbErrorResp | RpbPutResp
**   RpbDelReq -> RpbErrorResp | RpbDelResp
**   RpbListBucketsReq -> RpbErrorResp | RpbListBucketsResp
**   RpbListKeysReq -> RpbErrorResp | RpbListKeysResp{1,}
**   RpbGetBucketReq -> RpbErrorResp | RpbGetBucketResp
**
**
** Message Codes
**  0 - RpbErrorResp
**  1 - RpbPingReq - 0 length
**  2 - RpbPingResp (pong) - 0 length
**  3 - RpbGetClientIdReq
**  4 - RpbGetClientIdResp
**  5 - RpbSetClientIdReq
**  6 - RpbSetClientIdResp
**  7 - RpbGetServerInfoReq
**  8 - RpbGetServerInfoResp
**  9 - RpbGetReq 
** 10 - RpbGetResp
** 11 - RpbPutReq 
** 12 - RpbPutResp - 0 length
** 13 - RpbDelReq 
** 14 - RpbDelResp
** 15 - RpbListBucketsReq
** 16 - RpbListBucketsResp
** 17 - RpbListKeysReq
** 18 - RpbListKeysResp{1,}
** 19 - RpbGetBucketReq
** 20 - RpbGetBucketResp
** 21 - RpbSetBucketReq
** 22 - RpbSetBucketResp
** 23 - RpbMapRedReq
** 24 - RpbMapRedResp{1,}
**
*/

// Error response - may be generated for any Req
message RpbErrorResp {
    required bytes errmsg = 1;
    required uint32 errcode = 2;
}

// Get ClientId Request - no message defined, just send RpbGetClientIdReq message code
message RpbGetClientIdResp {
    required bytes client_id = 1; // Client id in use for this connection
}

message RpbSetClientIdReq {
    required bytes client_id = 1; // Client id to use for this connection
}
// Set ClientId Request - no message defined, just send RpbSetClientIdReq message code

// Get server info request - no message defined, just send RpbGetServerInfoReq message code

message RpbGetServerInfoResp {
    optional bytes node = 1;
    optional bytes server_version = 2;
}


// Get Request - retrieve bucket/key
message RpbGetReq {
    required bytes bucket = 1;
    required bytes key = 2;
    optional uint32 r = 3;
}

// Get Response - if the record was not found there will be no content/vclock
message RpbGetResp {
    repeated RpbContent content = 1;
    optional bytes vclock = 2;        // the opaque vector clock for the object
}


// Put request - if options.return_body is set then the updated metadata/data for
//               the key will be returned.
message RpbPutReq {
    required bytes bucket = 1;
    required bytes key = 2;
    optional bytes vclock = 3;
    required RpbContent content = 4;
    optional uint32 w = 5;
    optional uint32 dw = 6;
    optional bool return_body = 7;
}

// Put response - same as get response
message RpbPutResp {
    repeated RpbContent content = 1;
    optional bytes vclock = 2;        // the opaque vector clock for the object
}


// Delete request
message RpbDelReq {
    required bytes bucket = 1;
    required bytes key = 2;
    optional uint32 rw = 3;
}

// Delete response - not defined, will return a RpbDelResp on success or RpbErrorResp on failure

// List buckets request - no message defined, just send RpbListBucketsReq

// List buckets response
message RpbListBucketsResp {
    repeated bytes buckets = 1;
}


// List keys in bucket request
message RpbListKeysReq {
    required bytes bucket = 1;
}

// List keys in bucket response - one or more of these packets will be sent
// the last one will have done set true (and may not have any keys in it)
message RpbListKeysResp {
    repeated bytes keys = 1;
    optional bool done = 2;
}

// Get bucket properties request
message RpbGetBucketReq {
    required bytes bucket = 1;
}

// Get bucket properties response
message RpbGetBucketResp {
    required RpbBucketProps props = 1;    
}

// Set bucket properties request
message RpbSetBucketReq {
    required bytes bucket = 1;
    required RpbBucketProps props = 2;
}


// Set bucket properties response - no message defined, just send RpbSetBucketResp


// Map/Reduce request
message RpbMapRedReq {
    required bytes request = 1;
    required bytes content_type = 2;
}

// Map/Reduce response
// one or more of these packets will be sent the last one will have done set
// true (and may not have phase/data in it)
message RpbMapRedResp {
    optional uint32 phase = 1;
    optional bytes response = 2;
    optional bool done = 3;
}

// Content message included in get/put responses
// Holds the value and associated metadata
message RpbContent {
    required bytes value = 1;
    optional bytes content_type = 2;     // the media type/format
    optional bytes charset = 3;          
    optional bytes content_encoding = 4; 
    optional bytes vtag = 5;
    repeated RpbLink links = 6;          // links to other resources
    optional uint32 last_mod = 7;
    optional uint32 last_mod_usecs = 8;
    repeated RpbPair usermeta = 9;       // user metadata stored with the object
}

// Key/value pair - used for user metadata
message RpbPair {
    required bytes key = 1;
    optional bytes value = 2;
}

// Link metadata
message RpbLink {
    optional bytes bucket = 1;
    optional bytes key = 2;
    optional bytes tag = 3;
}

// Bucket properties
message RpbBucketProps {
    optional uint32 n_val = 1;
    optional bool allow_mult = 2;
}