encapsule
CLI tool to run developer containers, isolating your home directory and host from general effects inside the containers:
"encapsules" a project and/or temp home dir together with select "capabilities".
Originally derived from toolbox-constrained.
Run a (toolbox) container or image as
an isolated podman container. Unlike with toolbox create, this does not
bind-mount your home directory or integrate with the host by default.
You can explicitly choose what dir(s) or file(s) to mount or features to enable,
selecting user-configured "capabilities" that the encapsule container can access.
Most encapsule subcommands act on an image.
- If you wish to use an existing toolbox container as a starting point you can
commit it to an "encapsule" container image.
- Note your original toolbox container is left untouched: its system configuration and fs are just used as the base fs for the encapsule image (though its original bind mounts including $HOME will be not be included by default).
- Alternatively you can roll your own image or run a vanilla image like
fedora (fedora:latest), fedora-toolbox:44 or ubuntu:latest, etc.
- However toolbox images or containers are recommended because they include
sudo and runuser, but as such it doesn't have to be a toolbox container.
- For example since the fedora base container does not include runuser it runs as
--user root by default (since as of 0.5 util-linux is no longer
installed by default into encapsule containers: this may be addressed in future).
Encapsule images and containers are prefixed by encapsule-.
There is no need to use this prefix normally - it is implicit.
Usage
$ encapsule --version
0.5.1
$ encapsule --help
encapsule
Usage: encapsule [--version] COMMAND
Run a toolbox image in an isolated podman container
https://github.com/juhp/encapsule#readme
Available options:
-h,--help Show this help text
--version Show version
Available commands:
list List encapsule images and containers
list-caps List available capabilities
rm Remove an encapsule container
rmi Remove an encapsule image
stop Stop an encapsule container
backup Create a tarball backup of a directory
commit Commit an encapsule image from a container
create Create an encapsule container
enter Connect to an encapsule container
run Run a temporary encapsule container
There are 3 main commands: run, create, and enter.
run and create share many options.
run command
run starts a temporary encapsule container (removed on exit)
from a (toolbox) image or container.
$ encapsule run --help
Usage: encapsule run IMAGE [-v|--volume HOST:CONTAINER[:opts]]
[-e|--env KEY[=VALUE]] [--path DIR] [-i|--init CMD]
[--cap NAME] [--pull] [--user USER]
[(-H|--home DIR[:opts]) [--backup-home]]
[(-p|--project DIR[:opts]) [--backup-project]]
[-n|--name NAME] [--readonly] [--no-network] [--no-sudo]
[--no-skel] [--podman-opt OPTION] [--debug] [--dryrun]
[[--] CMD]
Run a temporary encapsule container
Available options:
-v,--volume HOST:CONTAINER[:opts]
Bind mount (user's files default to selinux :z)
-e,--env KEY[=VALUE] Set or pass through an environment variable
--path DIR Prepend a directory to PATH inside the container
-i,--init CMD A bash snippet run when creating the encapsule
container
--cap NAME Enable a capability from the config file
--pull Pull newer container image
--user USER Override container user [default: host/image user
with host UID]
-H,--home DIR[:opts] Mount a directory as a writable home (created if
missing; use DIR:O to overlay)
--backup-home Tarball home directory before starting
-p,--project DIR[:opts] Mount a (project) directory as workdir (use DIR:O to
overlay)
--backup-project Tarball project directory before starting
-n,--name NAME Optional container name (prefix with '^' prefix to
skip 'encapsule-' prefix)
--readonly Make the encapsule container filesystem read-only
--no-network Disable network access
--no-sudo Skip passwordless sudo setup
--no-skel Don't copy /etc/skel into an empty home
--podman-opt OPTION Pass an option directly to podman
--debug Show debug output
--dryrun Print the podman command instead of running it
-h,--help Show this help text
create command
create is similar but creates a reusable container for a project and/or temp home.
enter command
enter is used to join an existing (typically running) encapsule container.
An optional command can be given, as with run:
$ encapsule enter my-toolbox -- tmux
commit command
commit saves a container as an encapsule image (encapsule-CONTAINER by default).
Use -n/--name NAME for a custom image name (encapsule-NAME, or ^NAME to skip the prefix).
Examples
# Temporary isolated shell without host fs access
~$ encapsule run fedora-toolbox:44
# Mount current (project) directory path and set it as the working directory
# (also names the container after the project, e.g. encapsule-ubuntu-myproj)
~/myproj$ encapsule create ubuntu -p .
# Bind mount a volume
$ encapsule run fedora -v ~/data:/data
# create a custom "encapsule-fedora-toolbox-45" image from a toolbox container
$ encapsule commit fedora-toolbox-45
# Mount a temp "home" directory in the committed encapsule image
$ encapsule run fedora-toolbox-45 --home ~/tmp/home
# Save another encapsule image named "encapsule-dev"
$ encapsule commit --name dev fedora-toolbox-45
# Use capabilities from one's config
$ encapsule create dev --cap ssh --cap git
# Remove encapsule container
$ encapsule rm dev
# create "encapsule-my-toolbox" image
$ encapsule commit fedora-toolbox-45 --name my-toolbox
# Read-only container filesystem
$ encapsule run my-toolbox --readonly
# Set environment variables and prepend to PATH
$ encapsule run my-toolbox -e MY_VAR=hello -e LANG --path ~/.local/bin
# Run a specific command
$ encapsule run my-toolbox -- ls /
# Run a setup init scriptlet
$ encapsule run fedora-toolbox:45 -p proj --init "dnf install -y gcc make"
# Dry run: print the full podman command without running it
$ encapsule run --dryrun my-toolbox
There is a rmi command to remove an encapsule image no longer needed.
Capabilities
Capabilities define reusable groups of volumes, environment variables,
PATH entries, and init commands in ~/.config/encapsule/config.toml:
[capabilities.ssh]
volumes = ["~/.ssh:~/.ssh:ro"]
[capabilities.git]
volumes = ["~/.gitconfig:ro"]
[capabilities.wayland]
env = ["WAYLAND_DISPLAY", "XDG_RUNTIME_DIR"]
volumes = ["$XDG_RUNTIME_DIR/$WAYLAND_DISPLAY"]
security_opts = ["label=disable"]
[capabilities.rust]
path = ["~/.cargo/bin"]
Each capability can define:
volumes : list of bind mount specs
env : list of environment variables to set or pass through
path : list of directories to prepend to $PATH
init : a bash snippet to run on encapsule container creation
security_opts : list of --security-opt values passed to podman
~ and envvars are expanded in volume and path specs.
If the host and container paths are the same, you can use the shorthand
PATH[:opts] instead of PATH:PATH[:opts].
How it works
- Commits the named toolbox container to an encapsule image using
buildah commit.
- Runs
podman run with --userns=keep-id so you are your own user, not root
- Drops from root with
runuser if present, otherwise sudo -u
(enter uses podman exec --user)
- Sets up passwordless
sudo inside the encapsule container (unless --no-sudo)
- Bind mounts get SELinux
:z (shared) labels automatically,
so multiple containers can safely access the same directories
- When
-p/--project DIR is used (and --name isn't), the container name
includes the project directory's name (e.g. encapsule-mytoolbox-myproject),
so you can run the same toolbox against different projects at the same time
in separate encapsule containers. Though for different project paths with
the same directory name the container name will not be differentiated.
Installation
A copr repo is available for Fedora and EPEL 10:
https://copr.fedorainfracloud.org/coprs/petersen/encapsule/
Building from source
Install cabal-install and ghc.
cabal install
Build with stack
Alternatively you can build with:
stack install
Build release
To build the latest release: cabal install encapsule
or stack install encapsule.
Tests
cabal test runs an hspec suite that drives the encapsule CLI
(--dryrun against local images, plus an optional live run).
It needs podman and skips missing images.
Default images are ubuntu:latest and fedora:latest.
Override with ENCAPSULE_TEST_UBUNTU and ENCAPSULE_TEST_FEDORA.
Live tests need a TTY, or set ENCAPSULE_LIVE=1 to try without one.
ENCAPSULE selects a different encapsule binary.
cabal test
cabal bench times encapsule run --dryrun and a short run -- true
against a local image (same env vars as tests). It requires podman and an
image. It measures wall-clock time. To log timings:
cabal bench --benchmark-options '--csv /tmp/encapsule-bench.csv --time-limit 3'
# later: --baseline /tmp/encapsule-bench.csv
Runtime Requirements
- podman and buildah
- An existing (toolbox) container (created with
toolbox create) or an image.
- Alternatively other non-toolbox container/images can also work.
I already mentioned toolbox-constrained from which the initial code was derived.
There is also similarly schupfn which uses QEMU to run a toolbox container image in a VM with a direct private ssh connection.
Another somewhat related project is podenv, which "provides a declarative interface to manage containerized applications."
For stronger sandboxing and isolation, specially network, consider using OpenShell. At some point this project might move to wrapping or supporting openshell possibly.
There is also litterbox which has quite a lot of features and though somewhat opinionated, for example like openshell also supports landlock confinement.
Disclaimer
The simple isolation provided is limited best effort and
comes with no (security) warranty.
Please use this tool at your own risk.
Reports, suggests, and contributions to improve the tool are very welcome.
Contribute
encapsule is at https://github.com/juhp/encapsule and distributed
under the Apache-2.0 license.
