{-# LANGUAGE DeriveGeneric #-}
{-# LANGUAGE DuplicateRecordFields #-}
{-# LANGUAGE NamedFieldPuns #-}
{-# LANGUAGE OverloadedStrings #-}
{-# LANGUAGE RecordWildCards #-}
{-# LANGUAGE StrictData #-}
{-# LANGUAGE TypeFamilies #-}
{-# LANGUAGE NoImplicitPrelude #-}
{-# OPTIONS_GHC -fno-warn-unused-binds #-}
{-# OPTIONS_GHC -fno-warn-unused-imports #-}
{-# OPTIONS_GHC -fno-warn-unused-matches #-}

-- Derived from AWS service descriptions, licensed under Apache 2.0.

-- |
-- Module      : Amazonka.MediaConnect.UpdateFlowSource
-- Copyright   : (c) 2013-2023 Brendan Hay
-- License     : Mozilla Public License, v. 2.0.
-- Maintainer  : Brendan Hay
-- Stability   : auto-generated
-- Portability : non-portable (GHC extensions)
--
-- Updates the source of a flow.
module Amazonka.MediaConnect.UpdateFlowSource
  ( -- * Creating a Request
    UpdateFlowSource (..),
    newUpdateFlowSource,

    -- * Request Lenses
    updateFlowSource_decryption,
    updateFlowSource_description,
    updateFlowSource_entitlementArn,
    updateFlowSource_ingestPort,
    updateFlowSource_maxBitrate,
    updateFlowSource_maxLatency,
    updateFlowSource_maxSyncBuffer,
    updateFlowSource_mediaStreamSourceConfigurations,
    updateFlowSource_minLatency,
    updateFlowSource_protocol,
    updateFlowSource_senderControlPort,
    updateFlowSource_senderIpAddress,
    updateFlowSource_sourceListenerAddress,
    updateFlowSource_sourceListenerPort,
    updateFlowSource_streamId,
    updateFlowSource_vpcInterfaceName,
    updateFlowSource_whitelistCidr,
    updateFlowSource_flowArn,
    updateFlowSource_sourceArn,

    -- * Destructuring the Response
    UpdateFlowSourceResponse (..),
    newUpdateFlowSourceResponse,

    -- * Response Lenses
    updateFlowSourceResponse_flowArn,
    updateFlowSourceResponse_source,
    updateFlowSourceResponse_httpStatus,
  )
where

import qualified Amazonka.Core as Core
import qualified Amazonka.Core.Lens.Internal as Lens
import qualified Amazonka.Data as Data
import Amazonka.MediaConnect.Types
import qualified Amazonka.Prelude as Prelude
import qualified Amazonka.Request as Request
import qualified Amazonka.Response as Response

-- | A request to update the source of a flow.
--
-- /See:/ 'newUpdateFlowSource' smart constructor.
data UpdateFlowSource = UpdateFlowSource'
  { -- | The type of encryption used on the content ingested from this source.
    decryption :: Prelude.Maybe UpdateEncryption,
    -- | A description for the source. This value is not used or seen outside of
    -- the current AWS Elemental MediaConnect account.
    description :: Prelude.Maybe Prelude.Text,
    -- | The ARN of the entitlement that allows you to subscribe to this flow.
    -- The entitlement is set by the flow originator, and the ARN is generated
    -- as part of the originator\'s flow.
    entitlementArn :: Prelude.Maybe Prelude.Text,
    -- | The port that the flow will be listening on for incoming content.
    ingestPort :: Prelude.Maybe Prelude.Int,
    -- | The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.
    maxBitrate :: Prelude.Maybe Prelude.Int,
    -- | The maximum latency in milliseconds. This parameter applies only to
    -- RIST-based, Zixi-based, and Fujitsu-based streams.
    maxLatency :: Prelude.Maybe Prelude.Int,
    -- | The size of the buffer (in milliseconds) to use to sync incoming source
    -- data.
    maxSyncBuffer :: Prelude.Maybe Prelude.Int,
    -- | The media streams that are associated with the source, and the
    -- parameters for those associations.
    mediaStreamSourceConfigurations :: Prelude.Maybe [MediaStreamSourceConfigurationRequest],
    -- | The minimum latency in milliseconds for SRT-based streams. In streams
    -- that use the SRT protocol, this value that you set on your MediaConnect
    -- source or output represents the minimal potential latency of that
    -- connection. The latency of the stream is set to the highest number
    -- between the sender’s minimum latency and the receiver’s minimum latency.
    minLatency :: Prelude.Maybe Prelude.Int,
    -- | The protocol that is used by the source.
    protocol :: Prelude.Maybe Protocol,
    -- | The port that the flow uses to send outbound requests to initiate
    -- connection with the sender.
    senderControlPort :: Prelude.Maybe Prelude.Int,
    -- | The IP address that the flow communicates with to initiate connection
    -- with the sender.
    senderIpAddress :: Prelude.Maybe Prelude.Text,
    -- | Source IP or domain name for SRT-caller protocol.
    sourceListenerAddress :: Prelude.Maybe Prelude.Text,
    -- | Source port for SRT-caller protocol.
    sourceListenerPort :: Prelude.Maybe Prelude.Int,
    -- | The stream ID that you want to use for this transport. This parameter
    -- applies only to Zixi-based streams.
    streamId :: Prelude.Maybe Prelude.Text,
    -- | The name of the VPC interface to use for this source.
    vpcInterfaceName :: Prelude.Maybe Prelude.Text,
    -- | The range of IP addresses that should be allowed to contribute content
    -- to your source. These IP addresses should be in the form of a Classless
    -- Inter-Domain Routing (CIDR) block; for example, 10.0.0.0\/16.
    whitelistCidr :: Prelude.Maybe Prelude.Text,
    -- | The flow that is associated with the source that you want to update.
    flowArn :: Prelude.Text,
    -- | The ARN of the source that you want to update.
    sourceArn :: Prelude.Text
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'UpdateFlowSource' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'decryption', 'updateFlowSource_decryption' - The type of encryption used on the content ingested from this source.
--
-- 'description', 'updateFlowSource_description' - A description for the source. This value is not used or seen outside of
-- the current AWS Elemental MediaConnect account.
--
-- 'entitlementArn', 'updateFlowSource_entitlementArn' - The ARN of the entitlement that allows you to subscribe to this flow.
-- The entitlement is set by the flow originator, and the ARN is generated
-- as part of the originator\'s flow.
--
-- 'ingestPort', 'updateFlowSource_ingestPort' - The port that the flow will be listening on for incoming content.
--
-- 'maxBitrate', 'updateFlowSource_maxBitrate' - The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.
--
-- 'maxLatency', 'updateFlowSource_maxLatency' - The maximum latency in milliseconds. This parameter applies only to
-- RIST-based, Zixi-based, and Fujitsu-based streams.
--
-- 'maxSyncBuffer', 'updateFlowSource_maxSyncBuffer' - The size of the buffer (in milliseconds) to use to sync incoming source
-- data.
--
-- 'mediaStreamSourceConfigurations', 'updateFlowSource_mediaStreamSourceConfigurations' - The media streams that are associated with the source, and the
-- parameters for those associations.
--
-- 'minLatency', 'updateFlowSource_minLatency' - The minimum latency in milliseconds for SRT-based streams. In streams
-- that use the SRT protocol, this value that you set on your MediaConnect
-- source or output represents the minimal potential latency of that
-- connection. The latency of the stream is set to the highest number
-- between the sender’s minimum latency and the receiver’s minimum latency.
--
-- 'protocol', 'updateFlowSource_protocol' - The protocol that is used by the source.
--
-- 'senderControlPort', 'updateFlowSource_senderControlPort' - The port that the flow uses to send outbound requests to initiate
-- connection with the sender.
--
-- 'senderIpAddress', 'updateFlowSource_senderIpAddress' - The IP address that the flow communicates with to initiate connection
-- with the sender.
--
-- 'sourceListenerAddress', 'updateFlowSource_sourceListenerAddress' - Source IP or domain name for SRT-caller protocol.
--
-- 'sourceListenerPort', 'updateFlowSource_sourceListenerPort' - Source port for SRT-caller protocol.
--
-- 'streamId', 'updateFlowSource_streamId' - The stream ID that you want to use for this transport. This parameter
-- applies only to Zixi-based streams.
--
-- 'vpcInterfaceName', 'updateFlowSource_vpcInterfaceName' - The name of the VPC interface to use for this source.
--
-- 'whitelistCidr', 'updateFlowSource_whitelistCidr' - The range of IP addresses that should be allowed to contribute content
-- to your source. These IP addresses should be in the form of a Classless
-- Inter-Domain Routing (CIDR) block; for example, 10.0.0.0\/16.
--
-- 'flowArn', 'updateFlowSource_flowArn' - The flow that is associated with the source that you want to update.
--
-- 'sourceArn', 'updateFlowSource_sourceArn' - The ARN of the source that you want to update.
newUpdateFlowSource ::
  -- | 'flowArn'
  Prelude.Text ->
  -- | 'sourceArn'
  Prelude.Text ->
  UpdateFlowSource
newUpdateFlowSource pFlowArn_ pSourceArn_ =
  UpdateFlowSource'
    { decryption = Prelude.Nothing,
      description = Prelude.Nothing,
      entitlementArn = Prelude.Nothing,
      ingestPort = Prelude.Nothing,
      maxBitrate = Prelude.Nothing,
      maxLatency = Prelude.Nothing,
      maxSyncBuffer = Prelude.Nothing,
      mediaStreamSourceConfigurations = Prelude.Nothing,
      minLatency = Prelude.Nothing,
      protocol = Prelude.Nothing,
      senderControlPort = Prelude.Nothing,
      senderIpAddress = Prelude.Nothing,
      sourceListenerAddress = Prelude.Nothing,
      sourceListenerPort = Prelude.Nothing,
      streamId = Prelude.Nothing,
      vpcInterfaceName = Prelude.Nothing,
      whitelistCidr = Prelude.Nothing,
      flowArn = pFlowArn_,
      sourceArn = pSourceArn_
    }

-- | The type of encryption used on the content ingested from this source.
updateFlowSource_decryption :: Lens.Lens' UpdateFlowSource (Prelude.Maybe UpdateEncryption)
updateFlowSource_decryption = Lens.lens (\UpdateFlowSource' {decryption} -> decryption) (\s@UpdateFlowSource' {} a -> s {decryption = a} :: UpdateFlowSource)

-- | A description for the source. This value is not used or seen outside of
-- the current AWS Elemental MediaConnect account.
updateFlowSource_description :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_description = Lens.lens (\UpdateFlowSource' {description} -> description) (\s@UpdateFlowSource' {} a -> s {description = a} :: UpdateFlowSource)

-- | The ARN of the entitlement that allows you to subscribe to this flow.
-- The entitlement is set by the flow originator, and the ARN is generated
-- as part of the originator\'s flow.
updateFlowSource_entitlementArn :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_entitlementArn = Lens.lens (\UpdateFlowSource' {entitlementArn} -> entitlementArn) (\s@UpdateFlowSource' {} a -> s {entitlementArn = a} :: UpdateFlowSource)

-- | The port that the flow will be listening on for incoming content.
updateFlowSource_ingestPort :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_ingestPort = Lens.lens (\UpdateFlowSource' {ingestPort} -> ingestPort) (\s@UpdateFlowSource' {} a -> s {ingestPort = a} :: UpdateFlowSource)

-- | The smoothing max bitrate for RIST, RTP, and RTP-FEC streams.
updateFlowSource_maxBitrate :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_maxBitrate = Lens.lens (\UpdateFlowSource' {maxBitrate} -> maxBitrate) (\s@UpdateFlowSource' {} a -> s {maxBitrate = a} :: UpdateFlowSource)

-- | The maximum latency in milliseconds. This parameter applies only to
-- RIST-based, Zixi-based, and Fujitsu-based streams.
updateFlowSource_maxLatency :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_maxLatency = Lens.lens (\UpdateFlowSource' {maxLatency} -> maxLatency) (\s@UpdateFlowSource' {} a -> s {maxLatency = a} :: UpdateFlowSource)

-- | The size of the buffer (in milliseconds) to use to sync incoming source
-- data.
updateFlowSource_maxSyncBuffer :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_maxSyncBuffer = Lens.lens (\UpdateFlowSource' {maxSyncBuffer} -> maxSyncBuffer) (\s@UpdateFlowSource' {} a -> s {maxSyncBuffer = a} :: UpdateFlowSource)

-- | The media streams that are associated with the source, and the
-- parameters for those associations.
updateFlowSource_mediaStreamSourceConfigurations :: Lens.Lens' UpdateFlowSource (Prelude.Maybe [MediaStreamSourceConfigurationRequest])
updateFlowSource_mediaStreamSourceConfigurations = Lens.lens (\UpdateFlowSource' {mediaStreamSourceConfigurations} -> mediaStreamSourceConfigurations) (\s@UpdateFlowSource' {} a -> s {mediaStreamSourceConfigurations = a} :: UpdateFlowSource) Prelude.. Lens.mapping Lens.coerced

-- | The minimum latency in milliseconds for SRT-based streams. In streams
-- that use the SRT protocol, this value that you set on your MediaConnect
-- source or output represents the minimal potential latency of that
-- connection. The latency of the stream is set to the highest number
-- between the sender’s minimum latency and the receiver’s minimum latency.
updateFlowSource_minLatency :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_minLatency = Lens.lens (\UpdateFlowSource' {minLatency} -> minLatency) (\s@UpdateFlowSource' {} a -> s {minLatency = a} :: UpdateFlowSource)

-- | The protocol that is used by the source.
updateFlowSource_protocol :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Protocol)
updateFlowSource_protocol = Lens.lens (\UpdateFlowSource' {protocol} -> protocol) (\s@UpdateFlowSource' {} a -> s {protocol = a} :: UpdateFlowSource)

-- | The port that the flow uses to send outbound requests to initiate
-- connection with the sender.
updateFlowSource_senderControlPort :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_senderControlPort = Lens.lens (\UpdateFlowSource' {senderControlPort} -> senderControlPort) (\s@UpdateFlowSource' {} a -> s {senderControlPort = a} :: UpdateFlowSource)

-- | The IP address that the flow communicates with to initiate connection
-- with the sender.
updateFlowSource_senderIpAddress :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_senderIpAddress = Lens.lens (\UpdateFlowSource' {senderIpAddress} -> senderIpAddress) (\s@UpdateFlowSource' {} a -> s {senderIpAddress = a} :: UpdateFlowSource)

-- | Source IP or domain name for SRT-caller protocol.
updateFlowSource_sourceListenerAddress :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_sourceListenerAddress = Lens.lens (\UpdateFlowSource' {sourceListenerAddress} -> sourceListenerAddress) (\s@UpdateFlowSource' {} a -> s {sourceListenerAddress = a} :: UpdateFlowSource)

-- | Source port for SRT-caller protocol.
updateFlowSource_sourceListenerPort :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Int)
updateFlowSource_sourceListenerPort = Lens.lens (\UpdateFlowSource' {sourceListenerPort} -> sourceListenerPort) (\s@UpdateFlowSource' {} a -> s {sourceListenerPort = a} :: UpdateFlowSource)

-- | The stream ID that you want to use for this transport. This parameter
-- applies only to Zixi-based streams.
updateFlowSource_streamId :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_streamId = Lens.lens (\UpdateFlowSource' {streamId} -> streamId) (\s@UpdateFlowSource' {} a -> s {streamId = a} :: UpdateFlowSource)

-- | The name of the VPC interface to use for this source.
updateFlowSource_vpcInterfaceName :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_vpcInterfaceName = Lens.lens (\UpdateFlowSource' {vpcInterfaceName} -> vpcInterfaceName) (\s@UpdateFlowSource' {} a -> s {vpcInterfaceName = a} :: UpdateFlowSource)

-- | The range of IP addresses that should be allowed to contribute content
-- to your source. These IP addresses should be in the form of a Classless
-- Inter-Domain Routing (CIDR) block; for example, 10.0.0.0\/16.
updateFlowSource_whitelistCidr :: Lens.Lens' UpdateFlowSource (Prelude.Maybe Prelude.Text)
updateFlowSource_whitelistCidr = Lens.lens (\UpdateFlowSource' {whitelistCidr} -> whitelistCidr) (\s@UpdateFlowSource' {} a -> s {whitelistCidr = a} :: UpdateFlowSource)

-- | The flow that is associated with the source that you want to update.
updateFlowSource_flowArn :: Lens.Lens' UpdateFlowSource Prelude.Text
updateFlowSource_flowArn = Lens.lens (\UpdateFlowSource' {flowArn} -> flowArn) (\s@UpdateFlowSource' {} a -> s {flowArn = a} :: UpdateFlowSource)

-- | The ARN of the source that you want to update.
updateFlowSource_sourceArn :: Lens.Lens' UpdateFlowSource Prelude.Text
updateFlowSource_sourceArn = Lens.lens (\UpdateFlowSource' {sourceArn} -> sourceArn) (\s@UpdateFlowSource' {} a -> s {sourceArn = a} :: UpdateFlowSource)

instance Core.AWSRequest UpdateFlowSource where
  type
    AWSResponse UpdateFlowSource =
      UpdateFlowSourceResponse
  request overrides =
    Request.putJSON (overrides defaultService)
  response =
    Response.receiveJSON
      ( \s h x ->
          UpdateFlowSourceResponse'
            Prelude.<$> (x Data..?> "flowArn")
            Prelude.<*> (x Data..?> "source")
            Prelude.<*> (Prelude.pure (Prelude.fromEnum s))
      )

instance Prelude.Hashable UpdateFlowSource where
  hashWithSalt _salt UpdateFlowSource' {..} =
    _salt
      `Prelude.hashWithSalt` decryption
      `Prelude.hashWithSalt` description
      `Prelude.hashWithSalt` entitlementArn
      `Prelude.hashWithSalt` ingestPort
      `Prelude.hashWithSalt` maxBitrate
      `Prelude.hashWithSalt` maxLatency
      `Prelude.hashWithSalt` maxSyncBuffer
      `Prelude.hashWithSalt` mediaStreamSourceConfigurations
      `Prelude.hashWithSalt` minLatency
      `Prelude.hashWithSalt` protocol
      `Prelude.hashWithSalt` senderControlPort
      `Prelude.hashWithSalt` senderIpAddress
      `Prelude.hashWithSalt` sourceListenerAddress
      `Prelude.hashWithSalt` sourceListenerPort
      `Prelude.hashWithSalt` streamId
      `Prelude.hashWithSalt` vpcInterfaceName
      `Prelude.hashWithSalt` whitelistCidr
      `Prelude.hashWithSalt` flowArn
      `Prelude.hashWithSalt` sourceArn

instance Prelude.NFData UpdateFlowSource where
  rnf UpdateFlowSource' {..} =
    Prelude.rnf decryption
      `Prelude.seq` Prelude.rnf description
      `Prelude.seq` Prelude.rnf entitlementArn
      `Prelude.seq` Prelude.rnf ingestPort
      `Prelude.seq` Prelude.rnf maxBitrate
      `Prelude.seq` Prelude.rnf maxLatency
      `Prelude.seq` Prelude.rnf maxSyncBuffer
      `Prelude.seq` Prelude.rnf mediaStreamSourceConfigurations
      `Prelude.seq` Prelude.rnf minLatency
      `Prelude.seq` Prelude.rnf protocol
      `Prelude.seq` Prelude.rnf senderControlPort
      `Prelude.seq` Prelude.rnf senderIpAddress
      `Prelude.seq` Prelude.rnf sourceListenerAddress
      `Prelude.seq` Prelude.rnf sourceListenerPort
      `Prelude.seq` Prelude.rnf streamId
      `Prelude.seq` Prelude.rnf vpcInterfaceName
      `Prelude.seq` Prelude.rnf whitelistCidr
      `Prelude.seq` Prelude.rnf flowArn
      `Prelude.seq` Prelude.rnf sourceArn

instance Data.ToHeaders UpdateFlowSource where
  toHeaders =
    Prelude.const
      ( Prelude.mconcat
          [ "Content-Type"
              Data.=# ( "application/x-amz-json-1.1" ::
                          Prelude.ByteString
                      )
          ]
      )

instance Data.ToJSON UpdateFlowSource where
  toJSON UpdateFlowSource' {..} =
    Data.object
      ( Prelude.catMaybes
          [ ("decryption" Data..=) Prelude.<$> decryption,
            ("description" Data..=) Prelude.<$> description,
            ("entitlementArn" Data..=)
              Prelude.<$> entitlementArn,
            ("ingestPort" Data..=) Prelude.<$> ingestPort,
            ("maxBitrate" Data..=) Prelude.<$> maxBitrate,
            ("maxLatency" Data..=) Prelude.<$> maxLatency,
            ("maxSyncBuffer" Data..=) Prelude.<$> maxSyncBuffer,
            ("mediaStreamSourceConfigurations" Data..=)
              Prelude.<$> mediaStreamSourceConfigurations,
            ("minLatency" Data..=) Prelude.<$> minLatency,
            ("protocol" Data..=) Prelude.<$> protocol,
            ("senderControlPort" Data..=)
              Prelude.<$> senderControlPort,
            ("senderIpAddress" Data..=)
              Prelude.<$> senderIpAddress,
            ("sourceListenerAddress" Data..=)
              Prelude.<$> sourceListenerAddress,
            ("sourceListenerPort" Data..=)
              Prelude.<$> sourceListenerPort,
            ("streamId" Data..=) Prelude.<$> streamId,
            ("vpcInterfaceName" Data..=)
              Prelude.<$> vpcInterfaceName,
            ("whitelistCidr" Data..=) Prelude.<$> whitelistCidr
          ]
      )

instance Data.ToPath UpdateFlowSource where
  toPath UpdateFlowSource' {..} =
    Prelude.mconcat
      [ "/v1/flows/",
        Data.toBS flowArn,
        "/source/",
        Data.toBS sourceArn
      ]

instance Data.ToQuery UpdateFlowSource where
  toQuery = Prelude.const Prelude.mempty

-- | /See:/ 'newUpdateFlowSourceResponse' smart constructor.
data UpdateFlowSourceResponse = UpdateFlowSourceResponse'
  { -- | The ARN of the flow that you want to update.
    flowArn :: Prelude.Maybe Prelude.Text,
    -- | The settings for the source of the flow.
    source :: Prelude.Maybe Source,
    -- | The response's http status code.
    httpStatus :: Prelude.Int
  }
  deriving (Prelude.Eq, Prelude.Read, Prelude.Show, Prelude.Generic)

-- |
-- Create a value of 'UpdateFlowSourceResponse' with all optional fields omitted.
--
-- Use <https://hackage.haskell.org/package/generic-lens generic-lens> or <https://hackage.haskell.org/package/optics optics> to modify other optional fields.
--
-- The following record fields are available, with the corresponding lenses provided
-- for backwards compatibility:
--
-- 'flowArn', 'updateFlowSourceResponse_flowArn' - The ARN of the flow that you want to update.
--
-- 'source', 'updateFlowSourceResponse_source' - The settings for the source of the flow.
--
-- 'httpStatus', 'updateFlowSourceResponse_httpStatus' - The response's http status code.
newUpdateFlowSourceResponse ::
  -- | 'httpStatus'
  Prelude.Int ->
  UpdateFlowSourceResponse
newUpdateFlowSourceResponse pHttpStatus_ =
  UpdateFlowSourceResponse'
    { flowArn =
        Prelude.Nothing,
      source = Prelude.Nothing,
      httpStatus = pHttpStatus_
    }

-- | The ARN of the flow that you want to update.
updateFlowSourceResponse_flowArn :: Lens.Lens' UpdateFlowSourceResponse (Prelude.Maybe Prelude.Text)
updateFlowSourceResponse_flowArn = Lens.lens (\UpdateFlowSourceResponse' {flowArn} -> flowArn) (\s@UpdateFlowSourceResponse' {} a -> s {flowArn = a} :: UpdateFlowSourceResponse)

-- | The settings for the source of the flow.
updateFlowSourceResponse_source :: Lens.Lens' UpdateFlowSourceResponse (Prelude.Maybe Source)
updateFlowSourceResponse_source = Lens.lens (\UpdateFlowSourceResponse' {source} -> source) (\s@UpdateFlowSourceResponse' {} a -> s {source = a} :: UpdateFlowSourceResponse)

-- | The response's http status code.
updateFlowSourceResponse_httpStatus :: Lens.Lens' UpdateFlowSourceResponse Prelude.Int
updateFlowSourceResponse_httpStatus = Lens.lens (\UpdateFlowSourceResponse' {httpStatus} -> httpStatus) (\s@UpdateFlowSourceResponse' {} a -> s {httpStatus = a} :: UpdateFlowSourceResponse)

instance Prelude.NFData UpdateFlowSourceResponse where
  rnf UpdateFlowSourceResponse' {..} =
    Prelude.rnf flowArn
      `Prelude.seq` Prelude.rnf source
      `Prelude.seq` Prelude.rnf httpStatus